Repeated Freezing When Left Idle.

Since updating my PowerMac G5 to Leopard back when it came out, I've had a serious problem where everything will freeze up when left idle. My machine is configured to just shut the display off after 10 minutes of inactivity and I leave it on constantly. Each time the machine is left alone for several hours I move the mouse or hit a key to turn the display back on nothing happens. This was never a problem with 10.3 or 10.4 and started the day I installed 10.5. I can still ping the machine from other locations on my network but I cannot get any other type of network connectivity. The only way to bring it back to life is to hard power it down.
I have been checking the logs to see if there is anything in there that can be an indication of what's going on and I constantly see errors relating to the USB subsystem. They look similar to this...
USBF: xxx.xxx OHCI driver:
OHCIRootHubResetResetChange bit not sticking.
Retrying.
I've unplugged all of my USB devices to see if anything would change but it does nothing. The one thing I can't modify are the USB ports on my display. I have an older 17" display with an ADC connection. The ports on that display have been acting up for years and I do not use them but I have no means to disconnect them as it all flows over the ADC connection.
I'm running out of ideas on how to troubleshoot this.
Thanks,
Jeff.

Did you get tis fixed? I have an imac G5 that is doing the same thing.

Similar Messages

  • Keyboard and trackpad freeze when left idle after installing hard drive

    Installed a Samsung HM640jj hard drive in my Macbook Pro. Since then the keyboard and trackpad freeze if not in use. As long as I keep scrolling around on the pad everything works fine but as soon as I stop they both freeze. On startup the freezes only last a few seconds but the longer my mac is on the longer the freezes last. I've tried a lot of tricks from other posts but no luck. Not sure if its a glitch with the drive or if I should wipe it and reinstall from OS disk to see if that works. Any ideas? Thanks

    Any chance that something was damaged or loosened while you were replacing the drive?
    What other tricks have you tried? Did you reset the PRAM and/or SMC?

  • Macbook pro logs out of network when left idle and then I need to turn off the router and all computers in the house to reset the system.

    I have a macbook pro running 10.6.8.  Since I got it over a year ago it will disconnect from the network when left idle and then not be able to reconnect.  All computers in the house have to be shut down and the router turned off in order to reconnect again.   My son just updated his macbook using my os disc and now his computer is doing the same thing.  What can we do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

  • My trackpad loses connection when left idle

    My trackpad loses connectivity when left idle - anyone know why this is happening & how I can rectify? Grateful for any advice.

    Nothing else I can think of to try.
    You might want to take everything in for testing.
    Barry

  • Mouse loses Bluetooth connection when left idle

    I am suddenly having an issue where the bluetooth mouse which works off the preinstalled Toshiba bluetooth stack,
    loses its connection when left idle for a little while.
    This was not happening before.
    What could cause this?
    I just changed the batteries in the mouse so that is not the issue.
    Any ideas?

    That doesn't matter. If you can get a newer version for your band then use it.
    If not, install the Toshiba one and see if it works. Afterwards install your old one again,
    but ensure during the uninstallation that you do not remove the old Bluetooth setup configurations (The uninstaller asks for it).
    In this case the newer driver remain on your system. Maybe it solves your problem.

  • Safari spontaneously quits (auto-quits) when left idle (not in use) with no Safari-window open

    Safari 6.0.5 on Mac with OS X 10.8.4 (Mountain Lion) on Mac mini (October 2012) 1TB Fusion Dive (700 GB free) 16GB RAM (8GB free) spontaneously quits (auto-quits) when left idle  (not being used use) with no Safari-window is open.
    Console says nothing. No error message. Safari shows open on the Dock, and after a while it os not there. It has quitted itself!
    How to fix it?

    That sounds normal :
    Automatic Termination

  • Macbook Pro 15" i7 2.66Ghz restarts when left idle

    I think there is a problem when I have the Energy Saver option for Automatic Graphics Switching enabled and my machine is left idle, upon leaving for a meeting several times yesterday I came back to have my machine restarted at the login screen. This is a 3 day old fully updated machine running Snow Leopard 10.6.3. Anyone else experiencing this issue. After switching this off it has not restarted for over 18 hours now.

    I've figured out the problem, Under Security there is an idle logout setting that somehow got switched on when I upgraded to Snow Leopard. My old machine did not have this setting on and thus it was timing out due to inactivity and looked like a restart but was actually a logout. If Phone support had gone through this setting the logic board would not have needed to be replaced. At least It's resolved.

  • Computer "freezes" when left on for several hours.

    I have had my MacBook Pro since late February. It seems to "freeze" when I leave it on for prolonged periods of time (several hours) without using it. By "freeze" I mean when the display wakes up, the trackpad will allow me to move around the screen, but not click on anything. Occasionally, I will get the colored spinning wheel when I click on one thing, but it never allows me to access any program or even to shut down the computer normally with the trackpad. I am forced to use the power button for a forced shutdown. It then restarts normally.
    The computer has not been asleep, and has been attached to the power outlet the entire time. This is also not a kernel panic. (I have witnessed those with my previous computer.)
    Prior to this, I owned a 12in Powerbook for nearly 5 years. It never grew unresponsive like this. Is this a common problem with the MacBook Pros, or is there something wrong with my unit?
    Please let me know if you would like more information about my computer.

    mavenue, you should really post this as a separate topic as the probability is that your problem is not the same.
    (A) after such a forced restart have you done anything to check system integrity?
    (B) are you saying that Safari is set to open at startup/login?
    (C) which version of Safari are you using?
    (D) is Safari set to open on a blank page or access a website?
    (E) is the computer attached to a network at the time or not?
    (F) have you examined the logs in Console (if not, have a look and post them in discussions.
    Have a look at those points and start another thread with some of the information suggested above (including the log).

  • 2009 Mini freezes sometimes when left idle.

    Does anyone else get this problem?
    This is the second Mac mini as the first one had the same problem!
    Only does this two or three times a day. The mouse icon will still move but nothing reacts to it. I have to re-boot to get it going again.
    It is connected to a standard Mac wired keyboard and Mac wired mouse.
    Connected to the internet via Ethernet cable to a cable modem NTL box.
    I haven't yet loaded any extra software, it only has what it came with as standard.
    Hope someone can help.

    Same problem here. It freezes from time to time for 5 seconds or so, then everything is ok again. Even when playing music in iTunes, it becomes silent and then the music starts again. I changed the ram (and the hd as well), do you think this could be the cause?
    Bruno
    Message was edited by: aphextw

  • Trackpad "Selects" when left Idle

    I've noticed that if I leave my mouse cursor idle, without touching the trackpad, for a short period of time, it will act as if I've pressed and held down the mouse button. For example, if I leave my cursor over text in a webpage, then leave the cursor idle (i.e. i don't touch the trackpad) for 30 seconds or so, when I return and move the cursor it will highlight all the text it moves over as if I've pressed and held the mouse button.
    In another case, I was using iTunes and left the cursor over the title bar of the program where you would normally click and hold if you wanted to move the program around on your screen. I left the cursor there for about 30 seconds and when i returned to move the cursor it acted as if I had selected and held the iTunes program, moving it wherever I moved the mouse cursor.
    What's going on and how can I fix that? Has anyone else reported a similar problem? Thanks for any help!!

    What you could try is going to System Preferences, then clicking on Keyboard & Mouse, then going to the Trackpad tab at the top and seeing if it says that dragging is enabled. If it is, uncheck it and see if that helps.

  • MacBook pro freezes when left asleep

    When my MacBook pro is left asleep for prolonged periods I have found it beeping and the screen frozen--any thoughts as to why this might be happening?  Running OSX Mavericks.

    Hi taxologist,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Mac computers: About startup tones
    http://support.apple.com/kb/HT5860?viewlocale=en_US
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Macbook freezing when left open and untouched

    I have a 6-month-old macbook that has been working wonderfully (besides a glitch that was fixed at the Genius Bar a couple months ago) up until this past week. Recently, whenever I leave my macbook open and untouched for a while, sometimes for just a few minutes, the screen saver will come on like normal. However, when I move the mouse to get back to my desktop, the screen saver disappears and the computer freezes. I don't think I've changed any settings and I can't think of anything that I've been doing differently than before when it worked well. Has anyone else had this problem? Thanks!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Web pages keep repeatedly freezing when I enter my name

    I am now on my second iPhone 6 running IOS 8.2 and am experiencing the same issue-namely that on web pages when I try and type in my name (Zoe), the web page (and Safari) freeze as soon as I type the second letter. I updated to IOS 8.2 on my iPad mini today and had the same thing happen. Help!

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • After upgrade to 7.0, crash when left idle for more than a few minutes & if click contact without checking the box first.

    I had no serious problems with Firefox until downloading the current version. Since then I've had frequent crashes, usually several times a day, and even with CTL + ALT + Delete I have difficulty closing Firefox down. The crashes happen more frequently when I leave the program idle for, say, 15 minutes or more or when I attempt to open a contact for editing by directly clicking on the contact name, without checking the box first.
    My anti-virus software is ESET-NOD.

    I get this on firefox. I get this on waterfox. I get this on nightly. I don't get it on chrome. I don't get it on internet explorer. I don't get it on comodo dragon. I don't get it on arora. I don't get it on konqueror...... Anyone noticing a pattern here?
    I'm willing to admit that it's probably something to do with my isp server, so Mozilla can feel holier than thou about it, but if that's the way they insist on going, I suggest that the next time they upgrade, they call their browser Canute.

  • Macbook pro freezes when left unattended

    amateur grandma here
    when I leave my Macbook pro alone, goes to sleep, blank screen, will not activate unless I shut off and restart. Leaves me message when I boot up below.
    Tue Jul 22 08:20:43 2008
    panic(cpu 1 caller 0x004045DB): "TeslaSurface: attached at free()"@/SourceCache/xnu/xnu-1228.5.20/iokit/Kernel/IOLib.cpp:724
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x41cbbb28 : 0x12b0fa (0x4592a4 0x41cbbb5c 0x133243 0x0)
    0x41cbbb78 : 0x4045db (0x49b794 0x41cbbbb0 0x41cbbba8 0x27fca000)
    0x41cbbb98 : 0x40ab74 (0x41cbbbb0 0x49bdbc 0x3c 0x404dc1)
    0x41cbbc28 : 0x3eb79c (0x27fca000 0x0 0x1 0x40cb29)
    0x41cbbc48 : 0x3eb869 (0x27fca000 0x0 0x40d8c90 0x27fca000)
    0x41cbbc68 : 0xf317c2 (0x27fca000 0x240d0000 0x40d8c90 0x8176790)
    0x41cbbc98 : 0x40fc65 (0x240d0000 0x4128410 0x4128410 0x0)
    0x41cbbce8 : 0x43afc3 (0x240d0000 0x4128410 0x4128410 0x0)
    0x41cbbd48 : 0x18d18b (0x240d0000 0x4128410 0x0 0x0)
    0x41cbbdb8 : 0x12d17e (0x8176778 0xbea6890 0x41cbbdf8 0x11ee14)
    0x41cbbdf8 : 0x126257 (0x8176700 0x40d49e0 0x1ace780 0x0)
    0x41cbbf08 : 0x1973dd (0x41cbbf44 0x0 0x0 0x0)
    0x41cbbfc8 : 0x19f3b3 (0x4c1c120 0x0 0x1a20b5 0x41383c8)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffdca8
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(5.2.8)@0xf1d000->0xfabfff
    dependency: com.apple.NVDAResman(5.2.8)@0xae9000
    dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xadb000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x7cb000
    BSD process name corresponding to current thread: ScreenSaverEngin
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)

    Happy Birthday, young grandma
    It may just be the particular screensaver you are using - try another. Is it one of the defaults or one you downloaded or created?
    Also, you might creating a fresh user to test.
    Create a new account, name it "test" and see how your problem screensaver works in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.4 Combo Update . This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    Until it's sorted, you can use Screen Sleep in Energy Saver.
    -mj

Maybe you are looking for

  • ALV Grid to PDF File

    I know the FM  - CONVERT_ABAPSPOOLJOB_2_PDF  will convert ALV to PDF but i am not clear with input paramters need to pass to this function module. How to get spool request number. Kinldy give me an example how to convert my current alv output to PDF

  • OnEnterFrame

    I have a basic question about the onEnterFrame event handler. I understand how this code will continually repeat the output trace text: onEnterFrame = function () { trace ("onEnterFrame called"); but why does this only output the trace text once and

  • Proxy with attachment to FTP

    Hi, I have a scenario, at the sender side the ECC system will send the file as an attachment and via PI I have to place that file on FTP using FTPs adapter. I am not getting what structure should I create in PI for sender proxy,shall I put a single f

  • Can i change down level stage value?

    Aleady setting's IE6,7,8 view. but i need view down level stage in mobile browser. can i change setting value?

  • Software Protection

    Hello all... We've recently written a web application for a client and were wondering if there is anyway of limiting access to that application to only one pc. Meaning one application distributed to only 'licensed' pc's. I haven't seen much discussio