Repeated Kernel Panics on MBP17" after upgrading from SL (without anything else) to LION or MAVERICKS .

All tentatives to upgrade from SL to LION or MAVERICKS on my MBP17" causes a KERNEL panic.
SL was reinstalled on several HDD and SSD WITHOUT anything else.
Any update to LiON or MAVERICKS will result in an immediate Kernel Panic.
Any clue?
Thanks

Thanks for your quick answer.
I am the only administrator of my personnal MAC (only one account)
I can't even start in safe mode, there is no firevault nor firmware password , nor RAID volume.
Therefore I had to format the disk and reinstall SL that works like a charm. No way to access the console ….
Any attempt to install LION or MAVERICKS results in a KERNEL PANIC during installation ...
There is no apps installed, no peripheral attached,
By chance I managed somehow to print a log report (see below)
Mon Sep 15 20:04:44 2014
panic(cpu 0 caller 0xffffff80048dc24e): Kernel trap at 0xffffff7f85eb2e43, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8016f64800, CR3: 0x000000002f33a000, CR4: 0x0000000000000660
RAX: 0xffffff7f85ebc5e0, RBX: 0xffffff8016f79a00, RCX: 0xffffff80d0886320, RDX: 0x0000000000000000
RSP: 0xffffff8107502840, RBP: 0xffffff8107502840, RSI: 0x0000000000000000, RDI: 0xffffef8016f64800
R8: 0xffffff8107502a78, R9: 0xffffff81075029e0, R10: 0xffffff7f85ee8780, R11: 0x0000000000000000
R12: 0xffffff7f85eec180, R13: 0xffffff8016f79a88, R14: 0xffffff80d0886320, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f85eb2e43, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffef8016f64800, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81075024d0 : 0xffffff8004822f79
0xffffff8107502550 : 0xffffff80048dc24e
0xffffff8107502720 : 0xffffff80048f3746
0xffffff8107502740 : 0xffffff7f85eb2e43
0xffffff8107502840 : 0xffffff7f85ed7cda
0xffffff8107502860 : 0xffffff7f85ed781f
0xffffff81075028a0 : 0xffffff7f85ed72e3
0xffffff81075028e0 : 0xffffff7f85ede7cc
0xffffff8107502970 : 0xffffff7f84df0720
0xffffff81075029c0 : 0xffffff7f84df2cef
0xffffff8107502a20 : 0xffffff7f84df8484
0xffffff8107502ae0 : 0xffffff7f863b194c
0xffffff8107502c10 : 0xffffff8004a0dcae
0xffffff8107502c70 : 0xffffff80049c562c
0xffffff8107502d70 : 0xffffff8004a00826
0xffffff8107502dc0 : 0xffffff80049cd109
0xffffff8107502f00 : 0xffffff80049d1877
0xffffff81075030a0 : 0xffffff80049d0d75
0xffffff8107503360 : 0xffffff8004b6bc16
0xffffff81075033f0 : 0xffffff80049fe011
0xffffff8107503470 : 0xffffff8004b8ce6a
0xffffff81075034f0 : 0xffffff8004a003b0
0xffffff8107503560 : 0xffffff7f86aeca27
0xffffff81075035b0 : 0xffffff7f86aed2f2
0xffffff81075035e0 : 0xffffff7f86aebe9d
0xffffff8107503770 : 0xffffff7f86aed3f4
0xffffff8107503800 : 0xffffff7f86aed5b4
0xffffff8107503850 : 0xffffff8004a157d1
0xffffff81075038a0 : 0xffffff8004a15427
0xffffff8107503950 : 0xffffff8004b70c63
0xffffff8107503a10 : 0xffffff8004a00117
0xffffff8107503a80 : 0xffffff8004c3a7ec
0xffffff8107503b20 : 0xffffff800486d434
0xffffff8107503b70 : 0xffffff800486c893
0xffffff8107503bb0 : 0xffffff80048751d2
0xffffff8107503d50 : 0xffffff8004878a94
0xffffff8107503f20 : 0xffffff80048dc68c
0xffffff8107503fb0 : 0xffffff80048f364b
      Kernel Extensions in backtrace:
         com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f84dec000->0xffffff7f84e10fff
         com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f85eaf000->0xffffff7f85ec4fff
         com.apple.iokit.IOAHCIBlockStorage(2.6)[8EC80DE5-078F-3949-9669-33A56446D86D]@0 xffffff7f85ed5000->0xffffff7f85eecfff
            dependency: com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f85eaf000
            dependency: com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f84dec000
         com.apple.BootCache(35.0)[5565AC58-0589-341F-A4D8-9813C092B137]@0xffffff7f863b0 000->0xffffff7f863b8fff
         com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[CA4A4DEF-4BAA-3C 0A-972E-8C88E30B8BB9]@0xffffff7f86aeb000->0xffffff7f86aeefff
BSD process name corresponding to current thread: mds_stores
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro5,2 (Mac-F2268EC8)
System uptime in nanoseconds: 1419643683351
last loaded kext at 1117829524433: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86c3b000, size 49152)
last unloaded kext at 1189694094955: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86c3b000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleIRController 325.7
com.apple.driver.MaxTranserSizeOverrideDriver 3.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.42f4
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04EF, 0x5465616D2D2D456C6974652D313333330000
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04EF, 0x5465616D2D2D456C6974652D313333330000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 840 Series, 250.06 GB
Serial ATA Device: FUJITSU MJA2500BH FFS G1, 500.11 GB
USB Device: USB Storage
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:

Similar Messages

Maintenance Lost if you upgrade from Design to anything else

Hi,
I am upgrading a Design premium to elearning suite. The design premium has 2 years maintenance, but Adobehas told me that if I upgrade from design to anything else the maintenance is lost and I have to buy more.
If this right ?
rgds Paul

Most carriers do have a way to recover lost voice messages. Contact your carrier and see if they can help you recover the message. I'm very sorry for your loss and I do hope you get the message back.

Kernel panic when trying to upgrade from OS X 10.7.5

Running an intel imac with os x 10.7.5, I tried upgrading to mavericks. After downloading and try to restart, I get a persistent kernel panic. Have used disk utility from recovery HD to repair permissions and repair disk. Still get kernel panic screen on restart. What now?

If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report.

Maxdb give Kernel error after upgrade from 7.3 to 7.5

Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
The details of the error in knldiag are:
2008-07-02 14:22:39    19     11554 COMMUNIC UKT8 attached big comseg at 0x700000060000000
2008-07-02 14:22:39    19     11555 COMMUNIC UKT8 big comseg ends at      0x7000000601803F8
2008-07-02 14:22:39    16 ERR 20152 RTE      UNIX change owner with chown(knltrace,964,202) failed: Not owner
2008-07-02 14:22:39    16     11000 vdevsize 'knltrace', 666 failed
2008-07-02 14:22:39    16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
2008-07-02 14:22:39    16 ERR 11599 BTRACE   -
> Emergency Stack Back Trace <----
As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
thanks

Hello Thomas,
-> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
     Please check the upgrade log in the /sapdb/data/wrk
-> Please check the ownership of the files in the database RUNDIRECTORY.
For example, if the database owner:group of your database is sdb:sdba, then
-rw-rw----   1 sdb        sdba u2026.     knltrace
-> Please update the thread with the output of the following commands :
           sdbregview -l
           xinstinfo SD3
           id sdb
          ls -l <runditectory>
< rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
        more /etc/opt/sdb
Thank you and best regards, Natalia Khlopina

24" iMac repeatedly kernel panics when idle

I have recently been struck by repeated kernel panics on my 24" iMac. Until a few days ago, this happened when I woke it from sleep. Running Applejack showed up a corrupt Kensington MouseWorks pref file and removing that seems to have solved that problem. Now, however, I frequently come back to my iMac to find it kernel panicked. In other words, it panics without me doing anything. A recent example from panic.log is copied below. Is there an obvious fix? I have repaired permissions and checked memory. Thanks!
Sat Dec 2 22:35:55 2006
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000024, CR3: 0x01177000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x06b8e8b0, ECX: 0x00000000, EDX: 0x040c3a00
CR2: 0x00000024, EBP: 0x2589bf28, ESI: 0x00000001, EDI: 0x040c3a00
EFL: 0x00010246, EIP: 0x00392b8b, CS: 0x00000008, DS: 0x03f90010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2589bd28 : 0x128d1f (0x3c9540 0x2589bd4c 0x131df4 0x0)
0x2589bd68 : 0x1a3135 (0x3cf1f4 0x1 0xe 0x3cea24)
0x2589be78 : 0x19a8d4 (0x2589be90 0x0 0x1 0x3ba1f4)
0x2589bf28 : 0x3945f4 (0x40c3a00 0x10 0x3f768a8 0x37ec3e)
0x2589bf58 : 0x397bf1 (0x3f76880 0x135ec3 0x0 0x3f49144)
0x2589bf88 : 0x397927 (0x3f76800 0x34 0x8000 0xf0b)
0x2589bfc8 : 0x19a74c (0x3f76800 0x0 0x19d0b5 0x4c58144) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
iMac 24" Mac OS X (10.4.8) 2GB Ram, 500GB hard disk, iMac firmware update installed.

"mostly when I woke it from prolonged sleep"
pipas -
First, if your iMac has any third-party RAM, rather than the original Apple RAM, then I'd suggest that is the likely suspect. If so, that may not necessarily be shown in the results of the Apple Hardware Test. Best test of third party RAM is to remove it and replace with only the original Apple RAM, and see what the results of that are.
I don't know how or if Remy resolved his, but based on your above comment, I'd suggest you try the SMC reset, found here:
http://docs.info.apple.com/article.html?artnum=303446
If that doesn't resolve, I'd also try a PRAM reset.
To reset the PRAM:
1. Shut down the computer.
2. Locate the following four keys on the keyboard: Command (Apple logo), option, P, and R. You will need to hold these four keys down simultaneously in step 4.
3. Start up the computer.
4. Press and hold the Command-option-P-R keys. You must press this key combination after the startup chord sounds, but before the gray screen appears.
5. Hold all four keys down until the computer restarts and you hear the startup chord for the second time.
6. Release the keys.
If that wouldn't help, then I suppose you'll have to proceed through the links in my above post.

Repeated kernel panic (seems related to ipw2200)

Since a few months I have been experiencing repeated kernel panics at seemingly random times (the system boots up fine).
Below is an example of the panic screen that shows up, it seems related to the network driver ipw2200.
What I have done so far:
- I have set my router not to use N mode (only B and G) since the adapter does not support N, this did not resolve the situation.
- I have run memtest86+ with no error messages.
- I have reinstalled the kernel, to no avail
- I have reinstalled grub, although I don't think that could be the problem, since bootup is fine.
Here is one of the panic screens that appears:
(II) [KMS] Kernel modesetting enabled
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Key <MDSW> added to map for multiple modifiers
> Using Mod3, ignoring Mod5.
>Warning: Type "ONE_LEVEL"HAS 1 LEVELS, BUT <ralt> HAS 2 SYMBOLS
> iGNORING extra symbols
Errors from xkbcomp are not fatal to the X server
Fontconfig error: "local.conf", line 98 no element found
Starting Disk Manager...
Starting Authorization Manager
[ OK ] Started Authorization Manager.
[ OK ] Started Disk Manaer.
Fontconfig error: "local.conf, line 98 no element found
lients for VT switch
[8699.171214] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: f07f5a19@quinasus:~'(II) AIGLX: Suspending AIGLX c
[8699.171214]
[8699.174450] CPU: 0 PID: 5671 Comm: kworker/0:3 Not tainted 3.16.1-1-ARCH #1
[8699.174450] Hardware name: ASUSTeK Computer Inc. M6Ne /M6Ne, BIOS 0205 09/06/2004
[8699.174450] Workerqueue; events ipw_bg_associate [ipw2200]
[8699.174450] 00000000 968502c2 00000000 eede1ce4 c14616d5 eb57d154 eede1cfc c1460fdf
[8699.174450] 96b2319e eb57d154 96b2319e 00000000 eede1d0c c104f15e c1530ce4 f07f5a19
[8699.174450] eede1e20 f07f5a19 000007e9 ef933a00 00933a00 00000000 ef933a48 e0e37cbc
[8699.174450] Call Trace:
[8699.174450] [<c14616d5>] dump_stack+0x48/0x69
[8699.174450] [<c1460fdf>] panic+0x81/0x199
[8699.174450] [<c104f15e>] __stack_chk_fail+0x1e/0x20
[8699.174450] [<f07f5a19>] ? ipw_best_network+0x8a9/0x910 [ipw2200]
[8699.174450] [<f07f5a19>] ipw_best_network+0x8a9/0x910 [ipw2200]
[8699.174450] [<c1081c2f>] ? update_cfs_rq_blocked_load+0x17f/0x1b0
[8699.174450] [<c1003733>] ? do_alignment_check+0x13/0x30
[8699.174450] [<f07fe0b7>] ipw_associate+0x236/0x7a0 [ipw2200]
[8699.174450] [<c108a30c>] ? pick_next_task_fair+0x4ec/0x510
[8699.174450] [<c1001588>] ? __switch_to+0x118/0x4c0
[8699.174450] [<c1078151>] ? finish_task_switch+0x41/0xd0
[8699.174450] [<c1462bfd>] ? __schedule+0x34d/0x830
[8699.174450] [<f07f63e4>] ? ipw_rx_queue_replenish+0x124/0x150 [ipw2200]
[8699.174450] [<f07ff694>] ? ipw_bg_associate+0x24/0x30 [ipw2200]
[8699.174450] [<c106807c>] ? process_one_work+0x10c/0x3b0
[8699.174450] [<c10685d1>] ? worker_thread+0x41/0x4c0
[8699.174450] [<c1068590>] ? init_pwq.part.25+0x10/0x10
[8699.174450] [<c106dbe3>] ? kthread+0xb3/0xd0
[8699.174450] [<c1466601>] ? ret_from_kernel_thread+0x21/0x30
[8699.174450] [<c106db30>] ? kthread_create_on_node+0x130/0x130
[8699.174450] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xf073ffff)
[8699.174450] drm_kms_helper: panic occurred, switching back to text console
Any ideas how to resolve or further troubleshoot this?

graysky wrote:Is that driver included with the kernel package? If so, how about running mainline from the AUR as a test.
I am using the standard linux kernel from the official repositories. The ipw2200 driver is included, but requires the ipw2200-fw firmware.
While creating the package for the mainline kernel, the ipw2200 driver also shows up, doesn't that mean that it is also included in that kernel?
Would it still be useful to test this kernel in that case? I'll try it anyway, I am making the package after booting from a 2011 archlinux CD,
after which I have not yet had a kernel panic occur.
Additional note: turning the wireless network adapter off completely still gives the same kernel panic at seemingly random intervals (from minutes to hours after boot)
Also the computer seems to heat up sometimes, the following message appears: temperature above threshold, cpu clock throttled.
The kernel panic also appeared a few times while I was monitoring the temperature, which was at normal levels at those times.
Any more ideas?

Repeat Kernel Panics

My wife's laptop is having repeat Kernel panics while using Safari. I don't have a recent message to display the info, but I've read this may be a memory issue. Other thoughts before I take it in to Apple?

As you mentioned a frequent cause of KP's is RAM related. These are fairly easy to troubleshoot by yourself if you want to. The causes can be:
• Faulty RAM
• RAM not seated
• Incorrect RAM
I'm assuming if you are using the original RAM that came with the computer it's not Incorrect RAM, however if you have upgraded it that's the first thing I'd look at.
You mention this occurs when she is using Safari, Safari is a very stable product however all browsers tend to be RAM hogs, the longer they are left on and the more tabs or windows open the more RAM they use. Run Activity Monitor (Applications - Utilities - Activity Monitor) and you can get a fair idea how RAM and % CPU is being used.
That is where I'd start. In addition here are some very useful articles on trouble shooting Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.index-site.com/kernelpanic.html
http://support.apple.com/kb/HT1392
Roger

Kernel panic on startup after Software Update

My mother's iBook G4 is unable to startup due to a kernel panic that began after the last software update.
On boot, the computer goes to the kernel panic (You need to restart your computer) screen after a few seconds of the Apple logo screen. It cannot boot in Safe Mode or Single User mode (it hangs after reporting system uptime.)
It can boot into Target Disk mode.
The iBook updated its software (Java for Mac OS X 10.5 Update 6, Security Update 2009-006, HP Printer Drivers Update 1.1.1 and Safari 4.0.4) yesterday, then restarted and kernel panicked.
This happened to my girlfriend's PowerBook right after an update too, and because she didn't have her system disks, I asked my Mom to send her copy of 10.5 to me from SF to Portland. Now, the same thing has happened while I was in SF, and the system disk is in Portland (meaning I don't have an OS disk.)
Is there some way to fix this? I have full access to the disk on the iBook through a FireWire cable and target disk mode on my MacBook Pro (but disk utility can't check permissions.) Seems that I should be able to fix it somehow. Ideas?

Is there some way to fix this? I have full access to the disk on the iBook through a FireWire cable and target disk mode on my MacBook Pro (but disk utility can't check permissions.) Seems that I should be able to fix it somehow. Ideas?
Install the combo update that you can download from the Apple download site at http://www.apple.com/downloads/ . Sometimes the software update function doesn't install the updates correctly, causing just odd behaviors. The combo update has all prior updates from that OS X version included. If possible, it's good to repair permissions before and after the combo update.

Intel HD3000 repeated kernel panics

I'm writing some software (an open-source microscope control system) that uses OpenGL, and I'm getting repeated kernel panics whenever I make even a minor mistake. That is, OpenGL is functional, but if I do something slightly wrong then my computer crashes. This makes debugging absurdly painful, as you can probably imagine.
The panic report log (pasted below) clearly implicates the HD3000 driver. My question is, what can I do about this? The program should crash if I do something wrong, absolutely, but it shouldn't take the computer with it. This is ruining my ability to get work done.
I suppose it's remotely possible that the card is at fault, but I was able to play a 3D game without any difficulty so I doubt that.
I'm running OSX 10.7.4 and Software Update says I'm fully up-to-date. Would it be possible to downgrade my graphics card drivers? Perhaps a previous version is more stable.
Panic log:
Wed Sep 12 09:19:57 2012
panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f8174ba8c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8152eb2abc, CR3: 0x000000002be2c02d, CR4: 0x00000000000606e0
RAX: 0x000000002b000000, RBX: 0xffffff800c579000, RCX: 0xffffff8152eb2ab8, RDX: 0xffffff7f8174bca4
RSP: 0xffffff807f46b9f0, RBP: 0xffffff807f46ba10, RSI: 0xffffff800c579720, RDI: 0xffffff800c579000
R8: 0xffffff80732c766c, R9: 0xffffff807f46b924, R10: 0x0000018010eef000, R11: 0x0000000000000001
R12: 0xffffff800e031588, R13: 0xffffff800c579000, R14: 0xffffff807f46bb20, R15: 0xffffff800c579720
RFL: 0x0000000000010206, RIP: 0xffffff7f8174ba8c, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff8152eb2abc, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807f46b6a0 : 0xffffff8000220792
0xffffff807f46b720 : 0xffffff80002c473a
0xffffff807f46b8d0 : 0xffffff80002da0cd
0xffffff807f46b8f0 : 0xffffff7f8174ba8c
0xffffff807f46ba10 : 0xffffff7f8179a0ea
0xffffff807f46ba30 : 0xffffff7f8174f1a6
0xffffff807f46bb60 : 0xffffff7f8174c2bd
0xffffff807f46bbc0 : 0xffffff800065501e
0xffffff807f46bbe0 : 0xffffff80006558fa
0xffffff807f46bc40 : 0xffffff800065609b
0xffffff807f46bd80 : 0xffffff80002a3f08
0xffffff807f46be80 : 0xffffff8000223096
0xffffff807f46beb0 : 0xffffff80002148a9
0xffffff807f46bf10 : 0xffffff800021bbd8
0xffffff807f46bf70 : 0xffffff80002aef20
0xffffff807f46bfb0 : 0xffffff80002daa33
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.1.8)[3907A4CB-8AA1-3F6B-B052-8BA001 8E9C83]@0xffffff7f81743000->0xffffff7f81823fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80883000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80d16000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80cde000
BSD process name corresponding to current thread: Python
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 2717494941415
last loaded kext at 352238981609: com.apple.filesystems.smbfs    1.7.2 (addr 0xffffff7f80791000, size 241664)
last unloaded kext at 190411944832: com.apple.driver.AppleUSBUHCI    4.4.5 (addr 0xffffff7f80aed000, size 65536)
loaded kexts:
com.baltaks.driver.DoubleCommand    1.6.9
com.Logitech.Control Center.HID Driver    3.5.1
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AppleIntelProfile    85.2
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.2.0f3
com.apple.driver.AppleMikeyDriver    2.2.0f3
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.26
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AGPM    100.12.42
com.apple.driver.AppleIntelHD3000Graphics    7.1.8
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleSMCPDRC    5.0.0d0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.5f11
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.2
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d0
com.apple.driver.AppleLPC    1.5.8
com.apple.driver.AppleBacklight    170.1.9
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBTCButtons    225.2
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.5f11
com.apple.driver.AppleUSBTCKeyboard    225.2
com.apple.driver.AppleIRController    312
com.apple.iokit.SCSITaskUserClient    3.2.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.3
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AppleUSBHub    4.5.0
com.apple.driver.AirPort.Brcm4331    530.4.20
com.apple.driver.AppleSDXC    1.2.0
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.iokit.AppleBCM5701Ethernet    3.1.2b2
com.apple.driver.AppleUSBEHCI    4.5.8
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.8
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    193.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.driver.AppleIntelCPUPowerManagement    193.0.0
com.apple.driver.AppleProfileTimestampAction    85.2
com.apple.driver.AppleProfileThreadInfoAction    85.2
com.apple.driver.AppleProfileRegisterStateAction    85.2
com.apple.driver.AppleProfileReadCounterAction    85.2
com.apple.driver.AppleProfileKEventAction    85.2
com.apple.driver.AppleProfileCallstackAction    85.2
com.apple.iokit.AppleProfileFamily    85.2
com.apple.driver.DspFuncLib    2.2.0f3
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOFireWireIP    2.2.4
com.apple.iokit.IOSurface    80.0.2
com.apple.driver.AppleHDAController    2.2.0f3
com.apple.iokit.IOHDAFamily    2.2.0f3
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.6fc17
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.ApplePolicyControl    3.0.16
com.apple.driver.AppleSMC    3.1.3d8
com.apple.driver.IOPlatformPluginLegacy    5.0.0d0
com.apple.driver.AppleGraphicsControl    3.0.16
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.IOPlatformPluginFamily    5.1.0d17
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.iokit.IONDRVSupport    2.3.2
com.apple.kext.triggers    1.0
com.apple.driver.AppleIntelSNBGraphicsFB    7.1.8
com.apple.iokit.IOGraphicsFamily    2.3.2
com.apple.driver.AppleUSBBluetoothHCIController    4.0.5f11
com.apple.iokit.IOBluetoothFamily    4.0.5f11
com.apple.driver.AppleThunderboltDPInAdapter    1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.4
com.apple.driver.AppleUSBMultitouch    227.1
com.apple.iokit.IOUSBHIDDriver    4.4.5
com.apple.driver.AppleUSBMergeNub    4.5.3
com.apple.driver.AppleUSBComposite    4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.7
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.0
com.apple.driver.AppleThunderboltNHI    1.5.5
com.apple.iokit.IOThunderboltFamily    2.0.0
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IOUSBUserClient    4.5.8
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    4.5.8
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    331.6
com.apple.iokit.IOStorageFamily    1.7.1
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.6.8
com.apple.iokit.IOACPIFamily    1.4

Derakon wrote:
(Reposted from a post I made in the Macbook section, which was clearly the wrong place)
So is the developer forum
com.baltaks.driver.DoubleCommand    1.6.9
com.Logitech.Control Center.HID Driver    3.5.1
Remove those 3rd party kernel extensions and call me in the morning.

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Repeated Kernel Panics on MBP17" after upgrading from SL (without anything else) to LION or MAVERICKS .

Similar Messages

Maybe you are looking for