Repeated lost of AirPort Express signal on home network w/ Mac and Dell PC

After a year of steady, reliable home wireless network access with an AirPort Extreme base station and an Express relay in the upstairs, I am suddenly, repeatedly losing signal strength from the Express relay. The Express goes into a flashing amber status when the problem occurs. To solve the issue, I have successfully been able to restart the Express, which works for 12 to 36 hours before the situation happens again. What could have happened to cause this sudden recurring problem and what can be done to resolve it longer term?

Hello kkinva. Welcome to the Apple Discussions!
It is very possible that you may have some form of Wi-Fi interference that has been introduced recently in the immediate area that is preventing you from getting a good clean signal between the base stations.
I suggest you perform a simple site survey, using utilities like MacStumbler or iStumbler to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Similar Messages

How to connect a 2nd airport express in a home network?

I'm triying to connect a second airport express in my home network but when I plug in and go to Airpot Utility says :
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."
I don't know what to do to get connect the second airport exprees?, Do I miss something ?

You need AirPort Utility 5.6 to configure that model Express. The problem with that version is that Mountain Lion will refuse to let you install it.
This dilemma is easily solved. You simply need to extract the app from the installer package using a package extractor like Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
If you have an older computer with a version of AirPort Utility earlier than 6.0, you can administer it that way as well.

Using Airport Express as internet connection for one Mac and one PC

Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

No, not if the AirPort Express "joins" the wireless network.
No, I do not want to join a network.
It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.

Im trying a home network between Mac and Win 7, but its very slow

Hi guys,
ive searched for this for the last couple of days, but i havent found my sollution yet.
I have been trying to setup a network between my macbook and win7, and it works...i can move data.
The problem is that it is VERY slow. (2MB/sec max in the monitor app, it takes 6 minutes to transfer 1GB)
This is my setup:
Macbook 2011 ML 10.8 (I use WiFi to the router)
Zyxel P-2601HN-F1
Dell PC (connected thru ethernet cable to the router)
The ethernet adapter of the Dell is 192.168.1.37 and its a new cabel.
So i type in CMD-K, then smb://192.168.1.37 and connect with user and pass
I tried all the stuff i read here, like changing channels, but it stays really slow.
The crazy part is when i do both in Wifi, its almost as fast as with cable...and i DO use different ips in the smb connection
Maybe im going wired all over the studio and my house, but i would be awesome if this would work at least at 10/20MB/s, thats almost usb stick speed.
please help,
wendel

So i bought the Airport Extreme and hooked up all my hd's on the usb port...
the wireles upload speed from macbook to hd's is 5-6MB/s which is a lot better (40-48Mbit/s)
in the end i think its a protocol & adapter settings issue, with Windows using smb2, and apple using some old protocol from the 90's in ML 10.8.x
Also, there are a lot of (for me) complicated network adapter settings one has to know, before getting great transfer speeds between Win and OSX...so its easy to mess it up in Windows 7.
I read that Mavericks switched to smb2 too...so let's wait for all my software to be mavericks compatible and see how fast that will be with my Airport Extreme!
cheerio

I am unable to share files satisfactorily over my home network between Mac and Windows

Please advise.
I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB. The iMac also has a virtual PC in it using VMWare.
I have never been able to get file sharing to work satisfactorily across the network.
From the iMac, which is now running Yosemite, I can access the laptop and the external hard drive fine, but connections to the WD network drive are very slow and unreliable.
From the laptop, I can access the iMac and the WD network drive OK but while the LaCie share formatted for windows is visible, I am unable to open the individual files.
I was advised that I need a server. I have therefore bought and installed OS X Server on my Mac but I don't understand it and have absolutely no idea what to do to make it work. I open the LaCie share for example and cannot change anything - I get the message " 'Ignore ownership on this volume' is turned on for the volume containing the Share Point. All permissions will be ignored. This can be turned off in the 'Get info' window in the Finder." Except it can't, because there is no such option in that window.
I can find no help anywhere for this. Please tell me how I set my network up so that files can be shared freely across it.

Poor show Apple
Apple personnel aren't here. We're all just users like yourself and apparently there's no one here who's seen your post and can offer a solution.

How to Connect Airport Express to Existing Wireless Network (Client Mode)

I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>

Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks

Trying to connect my airport express to my home WIFI

Hi,
I have been trying to connect a airport express to my home WIFI connection for the purpose of wirelessly transmitting itunes to my Alfresco area using my iphone as a remote.
The problem i currently have is that the airport does not seem to pick up my wireless broadband.
My router is a Netgear dgnd3700.
The procedure i followed so far is : 1. Reset the airport back to factory settings.
2. Plug the ethernet cable in and open airport utility.
3. Tick the circle saying " join existing network ". Here's the problem, my wireless network does not show up.
I can type in the name of my network and also the password but the airport is not picking up the signal .... i cant choose a network.
I can create a new network no worries and connect devices to it but that's not what i'm after. I'd like to join my existing network so i can transmit itunes to my amp.
I've gone through the discussion forum but can't find an answer. I have also tried to manually set up the connection .. same result.
Any help would be great ... i'm about to give up and think it was abad idea ....

If it is the old G version Express you cannot use 6.3 utility.
You must use the 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Airport Express Signal very weak

I have added an additional express to help boost my signal which weakens dramatically as I leave my office. We have a linksys system that my sister brought from her old apartment - that gives a great signal - but 2 Express and almost no signal. The utility can see both - but no signal.
Does anyone have any ideas? This is the only Apple function that feels just like a PC application - frustrating!

Are you using one Airport Express as a Base Station, and the second Airport Express to "extend" the range of that Base Station? When you configured the second Airport Express with the Airport Setup Assistant, did you select the option to configure the second Airport Express as a new base station that "extends" the range of the wireless network of the Airport Express acting as your network's base station?

HT201577 I changed the network name on my time capsule and lost my airport express...how do I get it back?

I changed the network name of my time capsule and lost my airport express in the process.... I have tried all of the resets (soft/hard/factory default) suggested in other answers to people but cannot locate the network of my airport express. It just keeps flashing amber. I want to add it back to my time capsule to extend my network as it was before I reset the name. HELP

Which model of AirPort Express do you have?
If you are not sure, the model number is on the side or bottom of the Express. Hard to see.....you may need a magnifying glass. The model number starts with an "A" followed by four numbers.
Post back with that info.......if you want to get the Express set up again to work with the Time Capsule.
You do have another option as well, although you will have to think in reverse on this one.
Change the network name back to the original name on the Time Capsule, so the Express will work correctly on the network.
Now, change the network name on the AirPort Express. It will be blinking amber when you do this, so power it off.
Then, change the network name on the Time Capsule and let it restart.
Now, power up the AirPort Express and it will join up with the Time Capsule network since you have already programmed it with that information.

Lost the airport express install cd, any ideas?

I am helping my mom get her home network set-up and prior to installing the airport express the original case with the install cd has been misplaced. i figured it'd be no big deal as the software would be on the apple support page, but after a thorough search i cannot seem to find anything. help?

Ma(h) Je D'E wrote:
I am helping my mom get her home network set-up and prior to installing the airport express the original case with the install cd has been misplaced.
Welcome to Apple's discussion groups.
Try here:
http://support.apple.com/kb/DL839

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

If you can connect to your wireless network and you're using an Apple AirPort Base Station, then simply use AirPort Utility. From the Base Station menu, select Show Passwords...
Or, reset your wireless network password by momentarily depressing the reset button on your AirPort Extreme, Express, or Time Capsule. Press the button for one full second, no more. Then, configure a new password using AirPort Utility.
If you can't connect to your wireless network, or you are not using an Apple AirPort Base Station, you can use the procedure that follows below to retrieve it from your Mac's Keychain.
Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Airport Extreme and Airport Express on Ethernet Wired Network

I recently did work on my house and now have the house hard-wired for ethernet. I have an AirPort Extreme in my home office. That signal does not reach past the old part of the house (brick apparently blocks some of the signal). So I want to use my Airport Express in the new part of the house to have wireless in the new part as well.
Currently, I have the Airport Extreme plugged into the network, with the Airport Express plugged into the network in the new room. I get wireless connection in the office, but not in the new room.
I am not sure how to configure the base stations.
-- Do I need to use WDS? I am not currently, because each wireless router has its own independent wired link to the network.
-- Do I need to call the wireless networks by different names? Currently I have them both called the same thing.
-- Do I need to set the Airports for a different channel? Currently I have one on 10 and one on 11.
This should be very simple. Unfortunately, my experience has been that the Express base station is very difficult to configure, very quirky and not for the average user.
BTW, the Express is hooked up to the stereo and iTunes plays through that-- but remember it is a hard wired connection. Also both Airports show up in the Admin Utility, so no problem there.
Thanks.
~aviduser
1. Macintosh SE (1988)
2. PowerBook 180 (1993)
3. PowerMacintosh 7600 (1996)
4. PowerMacintosh G4 (2001)
5. PowerBook G4 12" (2003)
(Oh yeah, and there was the Newton MP2k)
G4 867 Quicksilver Mac OS X (10.3.9)

Do you have another router?
If not:
Connecting them together via Ethernet should be done like this:
Internet -> [WAN] AEBS [LAN] --> AirPort Express
The AirPort Express should so that the option to distribute IP addresses is disabled. The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the AirPort Extreme base station (AEBS).
OR connecting them via wireless should be done through WDS. The hardware connection should be done like this:
Internet -> [WAN] AEBS
The AirPort Express should not be connected to Ethernet.
See KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations.
If you do have a router, then both AEBS and Express should be configured so that the option to distribute IP addresses is disabled. The hardware connections should be set up like this:
Internet -> router -+-> [WAN] AEBS [LAN]
....................|-> AirPort Express
The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the router.

Airport Express no longer joins network

Greetings, I have a cable modem internet connection; I use an older Airport Extreme (802.11n, without Time Capsule) to make a local wifi network with WPA2 Personal security, and an older Airport Express (802.11 b/g, firmware 6.3) to connect a laser printer in a different room.
All was working well until two days ago when access to the internet disappeared. I reset the modem, confirmed that the cable connection was working by plugging a laptop directly into the modem by ethernet, determining that the problem was the Airport Extreme. I discovered the 7.5.2 firmware update which I uploaded, and all seemed well.
However, the 27" iMac upstairs only connected to Airport intermittently; it appeared to have been duplicated in name, as well as only recognized the Airport Express. I've since been able to correct that problem, however, now the Airport Express no longer connects to the Airport Extreme network.
I've tried soft resets (unplugging then plugging back in) and hard resets (pressing the reset button with a paperclip until the amber light flashes, then reconfiguring the device). I've tried setting the Airport Express both just to join the network (printer sharing) as well as extend the network; I also reverted the Airport Extreme's firmware to 7.4.2 which works perfectly well. However, now after each successive attempt to reconfigure the Airport Express to join the network, Airport Utility says that the Airport Express has been successfully updated and will restart, which it never does - it simply flashes an amber light, and Airport Utility eventually times out and says that it was unable to find the Airport Express after restarting, noting that the settings have been successfully updated, but that there is a problem re-joining the wireless network/finding the device. Notably, the Airport Express no longer appears in the left hand list of wireless devices in Airport Utility.
Help!!

Hi pslebow,
You make it sound like there was no change, then suddenly the Airport Express 802.11g lost connection to the wireless network and you can't get it back.
What network security is your wireless network using?
From the specification sheet, "…When joining an existing wireless network, AirPort Express only supports WPA-Personal."
AirPort Express - Technical Specifications
Please make sure your router security is set to match.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
If you have older Wi-Fi devices on your network that don't support WPA2 Personal (AES), a good second choice is WPA/WPA2 Mode (often referred to as WPA Mixed Mode). This mode will allow newer devices to use the stronger WPA2 AES encryption, while still allowing older devices to connect with older WPA TKIP-level encryption. If your Wi-Fi router doesn't support WPA/WPA2 Mode, WPA Personal (TKIP) mode is the next best choice.
Best,
Nubz

Using Airport Express to listen DVD via Front Row and Optical Out

I want to find out if this is possible:
I currently have Macbook Black Core 2 Duo. I enjoy watching DVDs using Front Row. The DVI video cable goes to the projector which is at the back of my room. Since the Macbook is close to the projector, I have to run optical audio cable to the 5.1 Dolby Digital home theater sound system at the front of my room.
I am interested in the AirPort Express because it can play iTunes wirelessly and use optical output to hook up the stereo system.
The question I want to know is if it's possible to connect Airport Express optical output into my Dobly Digital sound system so I can watch and listen DVD movies via Front Row? If not, any other alternatives? When searching through topics, it seems the users said Rogue Amoeba has a lag issue. Even I am not sure it can do optical output capabilites. Any thoughts. Thanks!
Mac OS X (10.3.9)

KonradL, Welcome to the discussion area!
To stream non-iTunes music to the AirPort Express (AX) you need Airfoil.

Repeated lost of AirPort Express signal on home network w/ Mac and Dell PC

Similar Messages

Maybe you are looking for