Repeated short duration calls 1-5 seconds

Hello, new to this forum. Thanks in advance for any help. On receiving my latest itemised bill, I noticed that I have repeated very short duration calls to mobiles of between 1 and 5 secs (107 in all).  On one evening I have 31 calls to the same number, 15 being of the this duration. Each time this happens it costs between 18 and 23 pence and these are spread across my bill on almost every day.  Could this possibly be some kind of a fault, or is it a case of someone in my family repeatedly calling an engaged mobile and getting a message? This is also on landlines, but not so often.  Would just like to know either way.

dougiex wrote:
Hello, new to this forum. Thanks in advance for any help. On receiving my latest itemised bill, I noticed that I have repeated very short duration calls to mobiles of between 1 and 5 secs (107 in all).  On one evening I have 31 calls to the same number, 15 being of the this duration. Each time this happens it costs between 18 and 23 pence and these are spread across my bill on almost every day.  Could this possibly be some kind of a fault, or is it a case of someone in my family repeatedly calling an engaged mobile and getting a message? This is also on landlines, but not so often.  Would just like to know either way.
Hi.
Is this still happening (e.g. can you check your bill and calls online ?)
It sort of sounds like a possible equipment fault - e.g. a faulty handset, or perhaps is there someone "sitting" on a dect/cordless phone, or it being held in a pocket perhaps causing buttons to be pressed, default ringing the first number in stored memory.
Do you know the mobile numbers being dialled ?
Are they actually mobile numbers, and not perhaps some form of dial in access - e.g. xfactor, I'm a celebrity etc ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

  • How can I make a row of cells containing 3-digit decimals, who's values resulted from calculations within the spreadsheet, appear as durations of minutes and seconds?

    Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
    Ryan

    Hi Ryan,
    You wrote:
    "The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
    I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
    In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
    Y6: =Y2/Y3
    In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
    Which is correct?
    Regards,
    Barry

  • SAP adapter giving the merged result set (First RFC call data + Second RFC call data) for second RFC call

    I have a WCF Adapter service to call a SAP RFC. When I call the RFC first time, it gives me correct no of result set but when I call this RFC second time immediately after first call, it gives me merged result set (First Result set + Second Result Set).
    e.g. We have a RFC which receives vendor number and blank object of result set as parameter and gives back the list of purchase orders as Response in object of result set for that vendor.
    Suppose, we have a vendor "a" and vendor "b". For vendor "a" there are 5 purchase orders and for vendor "b", we have 4 purchase orders in SAP. When I call the WCF adapter service for this RFC for vendor "a",
    it gives me 5 purchase orders. Immediately after first call, when I call WCF service for vendor "b", it gives me 9 (5+4) purchase order records which is wrong.
    In brief, one RFC call is affected by its previous call.
    For each new WCF request, a new object of result set is created, connection is opened, rfc is executed and connection is closed.
    Can anybody have any idea on this?
    Thanks.
    Thanks, Nishant Gupta

    Hi，
    Please refer to the document
    http://seroter.wordpress.com/biztalk-and-wcf-part-vii-about-the-biztalk-adapter-pack/

  • External Disply flickers and went Black for a short duration after yosemite update 10.10.2

    hi,
    i got a mac book pro late 2008 and since todays update my external monitor flickers and went black for a short duration.
    It seems that it happens, when i start a new app or i move a window across the displays.
    Disabling the automated scaling of the resolution reduced the flickering but it still happens.
    Does anyone faces the same problems and have an idea how to fix it?
    I would appreciate it.
    Sincerely
    Lukas

    Hello lukasfromholzwickede, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you've noticed flickering on your external display after updating OS X Yosemite. 
    I'd recommend starting with these resets to troubleshoot the situation:
    You can reset the Mac's parameter RAM and SMC.
    You can find these steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    If the behavior continues, try going through the steps in the "Update your software and firmware" and "No video or no signal, image distortion, 'snow,' or flickering" sections of this article, as well. 
    All the best,
    Jeremy 

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to make a bluetooth call on a second phone

    How do you make a bluetooth connection to make a call from a second mobile phone?
    I have a N95 and a work mobile. I want to allow people to call my N95 but becasue work pays for the calls from the other mobile, i would like to make a bluetooth connection to this other mobile so I can make calls from it, but using my N95.
    This is what I'm trying to do:
    I Speak --> N95 --> Bluetooth connection --> Other mobile --> 3G Network --> Destination phone
    Does anyone know if that's possible?

    As far as I know it isn´t possbile to make a call connection to another phone via bluetooth, sorry...
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    bump

  • Do Call manager 4.1X zero duration calls show as 1 sec?

    I've set the zero duration flag in Call Manager to True. But I still don't show any zero duration calls in the CDR. But I do show a bunch of 1 sec duration calls where I don't think I did before. Is this normal?

    try bug ID - CSCeg26693

  • How to repeat entries on calendar (ie. Second Wednesday of each month

    How would I enter repeating entries in calendar (ie. Second Wednesday of each month).

    Does anyone from Apple read these requests.  I need and want to repeat events like every 1st and 3rd Thursday and every 2nd and 4th Tuesday.  Too bad for Apple for not listening to these messages that have been going on for several years now.  I'm a brand new iPhone user and feel it would benefit Apple to correct this lacking feature.

  • HT201272 If I'm not happy with my download (i.e.. my song stops short of its 4:51 duration by about 23 seconds), can I download it again to see if this corrects the problem?

    Can I delete my song purchase and try downloading it again to correct a problem with the song ending prematurely?

    Hey,
    Thanks for the replies.
    Shining:
    The "greedy" mode did make firefox move much faster. Thank you.
    Regarding the "bloated" feeling:
    I did all sort of tweaking to my system, but it still feels not as I expected.
    I expected a different feeling because I have a desktop running Arch,
    and everything there is a lot more responsive: I don't have to wait 5-7 seconds for firefox (or open office) to launch,
    it takes 1-2 seconds. As I mentioned, the glxgears fps is much higher there. Even hard disk performance is a lot better (I am adding hdparm testing,
    please tell me if you see anything special, maybe thats the main problem).
    And I am talking about a 5 years old desktop, in comparison to a 6 months old laptop!
    Every extra tip you can give about accelerating my machine will be appreciated.
    Thanks a lot,
    fiod
    hdparm:
    [**@lg-tux fio]# hdparm -tT /dev/sda
    /dev/sda:
    Timing cached reads: 1562 MB in 2.00 seconds = 780.51 MB/sec
    Timing buffered disk reads: 116 MB in 3.05 seconds = 38.06 MB/sec
    [**@lg-tux fio]#
    fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    /dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
    /dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
    /dev/fd0 /mnt/fl vfat user,noauto 0 0
    /dev/sda2 /mnt/windows ntfs-3g defaults,users 0 0
    /dev/sda5 swap swap defaults 0 0
    /dev/sda6 / ext3 defaults,noatime 0 0
    PS: Maybe some extra parameters can be added to fstab? Something other than noatime?
    Thanks again
    fiod

  • Short dump while navigate to second view :: "OBJECTS_OBJREF_NOT_ASSIGNED_NO

    Hi,
    Can anybody help me out as I am getting a short dump while navigating to particular screen.
    The error was triggered when i was binding an internal table to node in my second view.
    The short dump shows as below.
    ■The following error text was processed in the system EID : Zugriff über 'NULL' Objektreferenz nicht möglich.
    ■The error occurred on the application server ECCIDES_EID_00 and in the work process 1 .
    ■The termination type was: RABAX_STATE
    ■The ABAP call stack was:
    Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
    Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    What can I do?
    ■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EID in transaction ST22.
    ■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ECCIDES_EID_00 in transaction SM21.
    ■If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server ECCIDES_EID_00 . In some situations, you may also need to analyze the trace files of other work processes.
    ■If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 700 -u: OBIZDEV -l: E -s: EID -i: ECCIDES_EID_00 -w: 1 -d: 20110723 -t: 161516 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED_NO
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please help.

    Hu Saravanan,
    Please find my code below in HANDLEFROM_EXPORTS_INIT and
    method HANDLEFROM_EXPORTS_INIT .
    data : WRK_DOC_CLAS type /OBIZ/ZXP_DOCCLS-DOC_CLAS.
    data : it_doc type TABLE OF /OBIZ/ZXP_SHPHD.
    DATA : doc_node type REF TO if_wd_context_node.
    BREAK-POINT.
    if doc_desc = 'Quotation'.
    WRK_DOC_CLAS = '0001'.
    elseif doc_desc = 'Sales Order'.
    WRK_DOC_CLAS = '0002'.
    elseif doc_desc = 'Delivery'.
    WRK_DOC_CLAS = '0003'.
    elseif doc_desc = 'Proforma Invoice'.
    WRK_DOC_CLAS = '0004'.
    elseif doc_desc = 'Billing'.
    WRK_DOC_CLAS = '0006'.
    ENDIF.
    select * INTO CORRESPONDING FIELDS OF TABLE
    it_doc FROM /OBIZ/ZXP_SHPHD WHERE doc_clas = WRK_DOC_CLAS.
    call METHOD doc_node->bind_table
    EXPORTING new_items = it_doc.
    endmethod.
    I have imported doc_desc via my inbound plug in the view.
    Regards
    Deric

  • WLS hanger when calling EJB in second WLS

    Hello,
    I have a very strange problem I need to track down. The scenario is as follows:
    WLS6.1 SP3/Solaris 2.8
    One WLS containing an EJB A (stateless session) that has Trx=Required on method_A,
    the second WLS that has an EJB B deployed (stateless session) that has Trx=NotSupported
    on method_B. Now I call in a client method_A of EJB A, which calls method_B of
    EJB B. This works fine.
    Now I install the second WLS on an different machine (same OS=solaris), and repeat
    above scenario. The result is that I am able to call method_A of EJB A, which
    calls method_B of EJB B. But after I return from method_B/EJB in EJB A, I hang
    in EJB A/postInvoke.
    From the thread dump I see the following:
    "ExecuteThread: '46' for queue: 'default'" daemon prio=5 tid=0x7c20c0 nid=0x35d
    waiting on monitor [0xdb0f000..0xdb0fdc0]
    at java.lang.Object.wait(Native Method)
    at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:1970)
    at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:1899)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:220)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:189)
    at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:272)
    at com.csg.pb.tit.tdc.cptypay.ejb.CounterpartyPayPathBean_43jp4t_EOImpl.routeCif(CounterpartyPayPathBean_43jp4t_EOImpl.java
    at com.csg.pb.tit.tdc.cptypay.ejb.CounterpartyPayPathBean_43jp4t_EOImpl_WLSkel.invoke(Unknown
    Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
    at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    How canI find out what is going on?
    Thanks
    Juerg

    I am getting the same exception about an assertion failed at weblogic.t3.srvr.T3Srvr.checkServerLock. Any ideas?

  • Returning to Original Call after answering second call

    While on a phone call, I answer the second call, but when I want to hang up from the second call, and return to the original call, I lose both calls. Can someone help me with this problem please? Thank you.

    Hi and welcome to the BTSC forums.
    Enjoy your stay with us!
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Change slide duration to 2.5 seconds??

    Is it possible to change the duration of a slide to 2.5 seconds in imovie08. I keep trying, but it seems to make it go to 4 seconds rather than 2.5. 2 seconds is a little too fast and 3 makes my slide show a bit too long. I have also changed the duration of the transitions, but that makes the transitions too quick, but that I can live with. I would just like to shorten the slides a bit.
    Thanks for your help!
    Colleen

    I would just like to shorten the slides a bit.
    Add all your slides at the current default whatever it is. After the last one is added, select it and "Control-click" it to open the contextual menu. Now select the "Set Duration" option, enter the time you want, and the select the option to change all photo durations.

  • How can I delete an image that is being repeated as a heading on a second page of a document?

    I have a pages document that has a formal heading with a logo, and on the second page, it automatically repeated, so I was hoping that someone had some insight on how to stop the repeated logo, because I only want it on the first page. When I try to delete it from the second page, it deletes it from the first page as well. Please and thank you for your help!

    About… is always under the thing it is about.
    So for Pages it is under the Pages menu.
    In Pages 5.1 you can not insert images into the Header, so I assume you have put it in the Section Master.
    click at the end of the first page text > Menu > Insert > Section Break
    Then delete the logo in the subsequent section/s. Section Master objects repeat for every page of the section they are in. As the name suggests.
    Peter

Maybe you are looking for