Repeated Timeouts and "Lost" Interruptus

Hello,
At the risk of repeating an often-asked question, has anyone noticed particularly bad download speeds over the last two days? I have been attempting to download a single standard-definition episode of a TV show over a total of approximately seven hours. I've ruled out network problems; I am on a good DSL line and can download from other sources without difficulty. I have also been able to download much larger files from iTunes in a fraction of the time.
Thanks...
Benjamin Haag
http://www.cbenjaminhaag.com

Oh, and don't even get me started on SEARCH for text within a message. This has never worked, from Day One.
All I ever get is "We were unable to perform your request. Please try again." SEARCH on header text, like Sender and Subject works fine, but apparently Verizon QA has never tested the other options on large mail inboxes.
I'm pretty forgiving and undersrtanding of minor glitches and shortcomings in software, but Verizon Webmail is one of the most unreliable utilities that I've ever encountered from a large company with a huge customer base.

Similar Messages

  • Webmail timeouts and lost mail

    I have seen several topics here  with people complaining that Webmail times out when they are composing outgoing mail, and lose it when they hit send. However, none of these existing posts seem to have valid fixes or responses, and they all seem to be locked down to prevent new comments, so here is my two cents:
    1. I have absolutely experienced the same thing. I've finally gotten into the habit of composing e-mail in an external editor, because I am sick and tired of wasting time recomposing lost e-mail.
    2. The Verizon FAQ states two, contradictory policies, both of which are inaccurate:
    http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/121965.htm:
    Does Webmail time me out?
    Webmail does not timeout due to inactivity.
    http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup%20And%20Use/QuestionsOne/123344.htm
    Does Webmail time out?
    Due to security reasons, Webmail Basic does timeout after 20 minutes of inactivity. However, messages that were being composed before your session timed out will be saved in the DRAFTS folder.
    The first one is outright wrong. Webmail absolutely, positively DOES time out.
    The second one is wrong, at least in some circumstances. I have no doubt that this is their desired policy, but like many other customers, I'm here to tell you that under at least some circumstances, Webmai-l times out in as little as 5 minutes, and in these same circumstances, IT DOES NOT SAVE YOUR COMPOSED E-MAIL TO THE DRAFTS FOLDER. It simplay takes you to the log in screen, and when you log back in, your text is irretrievably gone. Verizon Webmail has not auto-saved anything for me in at least a year.
    3. I have a theory as to what is going on here, and I am testing it today. Maybe one or two other folks can try this, too. I will report back whatever I find:
    I access Webmail through an old bookmark which is defined as http://netmail.verizon.net/webmail/driver?nimlet=deggetfolder
    However, I notice that if I login fresh from www.verizon.net and navigate to Webmail, I GET DIFFERENT SESSION COOKIES THAN I DO FROM THE ABOVE BOOKMARK. For example, I get a cookie called -_WL_AUTHCOOKIE_VZCSESSIONID which is not present when I log in using the old bookmark.. There are a couple of other variations, but this seems the most suspicious.
    So, my theory is that those of us who often lose composed e-mail after ridiculously short time outs, are logging in from old bookmarks, and that things changed underneath us at some point during a Verizon Webmail update. I am going to try  usng Webmail today from a fresh login, after first clearing out all my existing Verizon cookies, and see if this results in longer sessions without timing out, and saved messages when it does time out.

    Oh, and don't even get me started on SEARCH for text within a message. This has never worked, from Day One.
    All I ever get is "We were unable to perform your request. Please try again." SEARCH on header text, like Sender and Subject works fine, but apparently Verizon QA has never tested the other options on large mail inboxes.
    I'm pretty forgiving and undersrtanding of minor glitches and shortcomings in software, but Verizon Webmail is one of the most unreliable utilities that I've ever encountered from a large company with a huge customer base.

  • No repeated values and in ascendant sort

    Hi all,
    I'm trying to put this:
    SELECT DISTINCT month FROM Concert ORDER BY month ASC;
    (no repeated values and in ascendant sort) into EJB-QL. This is what I've worked out:
    SELECT DISTINCT OBJECT(o)
    FROM Concert AS o
    ORDER BY o.month ASC
    (month is a field in the bean )
    But this (and several tries later) doesn't work.
    What's wrong with it??
    The query is for a findAll method -without- input parameters which returns a collection, is here the error??? If so, how can I solve it?
    I'm totally lost and frustrated, I'd really appreciate some light
    Thanks a lot in advance

    Your query is currect if table name and attribute name are currect.
    Can you write what type of error is comming?

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Database connection timeouts and datasource errors

    Connections in the pool randomly die overnight. Stack traces show that for some reason, the evermind driver is being used even though the MySql connection pool is specified.
    Also, the evermind connection pool is saying connections aren't being closed, and the stack trace shows they're being allocated by entity beans that are definitely not left hanging around.
    Sometimes we get non-serializable errors when trying to retrieve the datasource (this is only after the other errors start). Some connections returned from the pool are still good, so the application limps along.
    EJBs and DAOs both use jdbc/SQLServerDSCore.
    Has anyone seen this problem?
    <data-sources>
         <data-source
              class="com.mysql.jdbc.jdbc2.optional.MysqlConnectionPoolDataSource"
              name="SQLServerDSCore"
              location="jdbc/SQLServerDSCore"
              xa-location="jdbc/xa/SQLServerXACore"
              ejb-location="jdbc/SQLServerDSCore"
              connection-driver="com.mysql.jdbc.Driver"
              min-connections="5"
              username="xxx"
              password="xxx"
              staleness-timeout="3600"
              alive-poll-query="SELECT 1 FROM medispan"
              url="jdbc:mysql://1.2.3.4:3306/dbo?autoReconnect=true&autoReconnectForPools=true&cachePrepStmts=true&is-connection-validation-required=true"
              inactivity-timeout="30"
         >
              <property name="autoReconnect" value="true"/>
              <property name="autoReconnectForPools" value="true"/>
              <property name="is-connection-validation-required" value="true"/>
              <property name="cachePrepStmts" value="true"/>
         </data-source>
    </data-sources>

    Rick,
    OC4J 9.0.4.0.0 - BTW, do you know of any patches?As far as I know, there are no patches for the 9.0.4
    production version of OC4J stand-alone.
    I'm using container managed persistence,It was not clear to me, from your previous post, that you
    are using CMP entity beans.
    I found staleness-timeout and alive-poll-query
    somewhere on a website when trying to track this
    down. Here's four sources:Those sources refer to OrionServer -- and an older version, too, it seems.
    Like all other Oracle products that start out as somebody
    else's -- including, for example, JBuilder (that became "JDeveloper"), Apache Web Server (that became "Oracle HTTP Server") and TopLink -- their development paths diverge, until, eventually, there is absolutely no similarity between them at all. Hence, the latest versions of OC4J and "OrionServer" are so different, that you cannot be sure that something that works for "OrionServer" will work for OC4J.
    I recall reading something, somewhere, sometime about configuring OC4J to use different databases (other than Oracle), but I really don't remember any details (since it was not relevant to me, because we only use Oracle database). In any case, it is possible to use a non-Oracle database with OC4J.
    Good Luck,
    Avi.

  • Traceroute timeouts and lots of packet loss when a...

    I host various site via the above, and since late last night and today, I am having connection timeout issues on all of them (but sites like bbc, bt etc are fine). I contacted them and performed a traceroute to my default site southee.co.uk which timed out. Below are the results:
    traceroute to southee.co.uk (37.61.236.12), 64 hops max, 52 byte packets
    1 bthomehub (192.168.1.254) 2.733 ms 2.414 ms 2.415 ms
    2 esr5.manchester5.broadband.bt.net (217.47.67.144) 72.412 ms 29.705 ms 131.735 ms
    3 217.47.67.13 (217.47.67.13) 31.390 ms 29.680 ms 103.936 ms
    4 213.1.69.226 (213.1.69.226) 41.172 ms 32.700 ms 129.323 ms
    5 31.55.165.103 (31.55.165.103) 30.791 ms 31.639 ms 130.306 ms
    6 213.120.162.69 (213.120.162.69) 31.248 ms 59.138 ms 30.657 ms
    7 31.55.165.109 (31.55.165.109) 32.159 ms 31.507 ms 31.513 ms
    8 acc2-10gige-9-2-0.mr.21cn-ipp.bt.net (109.159.250.228) 31.499 ms 31.325 ms
    acc2-10gige-0-2-0.mr.21cn-ipp.bt.net (109.159.250.194) 31.197 ms
    9 core2-te0-12-0-1.ealing.ukcore.bt.net (109.159.250.147) 41.744 ms
    core2-te0-13-0-0.ealing.ukcore.bt.net (109.159.250.139) 41.346 ms
    core2-te0-5-0-1.ealing.ukcore.bt.net (109.159.250.145) 41.744 ms
    10 peer1-xe3-3-1.telehouse.ukcore.bt.net (109.159.254.211) 39.527 ms
    peer1-xe10-0-0.telehouse.ukcore.bt.net (109.159.254.122) 38.791 ms 38.910 ms
    11 te2-3.sov-edge1.uk.timico.net (195.66.224.111) 54.032 ms 37.941 ms 38.642 ms
    12 78-25-201-30.static.dsl.as8607.net (78.25.201.30) 45.830 ms 46.413 ms 42.448 ms
    13 * * *
     They then performed a traceroute from the server and got the following, again with timeouts and packet loss. See below:
    1. 37.61.236.1 0.0% 10 0.5 0.7 0.4 2.9 0.8
    2. ae0-2061.ndc-core1.uk.timico 0.0% 10 0.3 0.3 0.2 0.5 0.1
    3. te2-3.sov-edge1.uk.timico.ne 0.0% 10 10.5 9.7 4.2 30.2 8.7
    4. linx1.ukcore.bt.net 0.0% 10 4.1 4.3 4.1 5.9 0.6
    5. host213-121-193-153.ukcore.b 0.0% 10 5.5 8.0 4.9 12.7 2.3
    6. acc2-10GigE-4-3-1.mr.21cn-ip 0.0% 10 11.4 11.4 11.4 11.6 0.1
    7. ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
    8. 31.55.165.108 0.0% 10 12.1 12.1 11.8 12.4 0.2
    9. 213.120.162.68 0.0% 10 12.0 12.1 12.0 12.3 0.1
    10. ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
     I've just spent a fustrating 15 minutes with Bt Support chat who just seemed want to pass me on to the BT Business team, so I thought I'd post here, for a more informed response.

    Hi Jane, Thanks for the reply. I have now purchased an AEBS(n) to try to overcome this problem. The Apple site says it is compatible with all versions of Airport card so I thought it would solve the problem. My new problem is to be found here: http://discussions.apple.com/thread.jspa?threadID=1087292&tstart=0
    However to answer your questions, The OS is 10.4.10 and I have run every updater I can find for all Macs concerned. hope this helps.

  • Re: timeouts and ExternalConnection

    Tim,
    Use a Timer class of Framework library to have an explicit control over
    the connection. If the end-of-stream marker is not received within a
    specified interval of time, handle the situation.
    ExternalConnection class does not have any timeout feature of its own,
    but it would be a good idea to have one in future.
    Braja.
    \\\|///
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~oOOo- (_) -oOOo~~~~~~~
    BRAJA KISHORE CHATTARAJ
    Consultant, Analysts International Corporation.
    Work : Sphinx Pharmaceuticals (A division of Eli Lilly & Co.)
    (919) 419-5798
    Home : 1801, Williamsburg Rd., #41H, Durham, NC 27707.
    (919) 403-7296
    E-mail : [email protected]
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Oooo~~~~~~~
    oooO ( )
    Please respond to Tim Kannenberg <[email protected]>
    Subject: timeouts and ExternalConnection
    I am working on a Forte service that uses a socket listener (implemented
    using the ExternalConnection class) to handle incoming messages. The
    messages vary in length, so the code for processing each connection
    loops until it finds an end-of-stream marker. If some client is
    erroneously sending messages without the marker, it'll loop forever. I
    would like the connection to time out if it doesn't receive any valid
    messages within a fixed length of time. Is there some functionality
    I've overlooked in ExternalConnection that would handle this? If not,
    does anybody have an example of a good way to implement it?
    Thanks in advance,
    Tim
    Tim Kannenberg
    Strong Capital Management
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    I've re-run the speed test. Here they are. Download speedachieved during the test was - 19915 Kbps For your connection, the acceptable range of speedsis 12000-29036 Kbps . Additional Information: IP Profile for your line is -29036 Kbps Upload speed achieved during the test was - 3819 Kbps Additional Information: Upstream Rate IP profile on your line is - 10000 Kbps Although the speed has dropped markedly since Saturday, its the dropouts, the VPN unable to connect and the slow respnses when trying to connect to websites quickly (DNS issue?) that is bothering me. It's not just one website that the problem is with, its any.

  • Frequent timeouts and poor performance

    Hello,
    Starting this morning I'm experiencing a lot of timeouts and performance issues with my SQL Azure DB (located in West US), causing several Azure hosted services to fail. I've checked everything I can think of and it nothing shows a clear problem with our
    databases. I'm not seeing anything on the dashboard, but can't help but wonder if there is an issue going on that hasn't been detected.
    Any suggestions on how to troubleshoot this issue?
    Thanks,
    -Fabio

    Hi Fabio,
    I work on the Cotega monitoring service for SQL Azure and I can also confirm that we saw a few customer who we notified of performance issues with SQL Azure as well.   
    Now that I write this, I am wondering if it might be worth adding to the service a page that lets anyone see the historical performance of SQL Azure based on aggregated data from all of the customers databases that we currently monitor.  I wonder if
    that would be useful for situations like this?

  • SQL Timeouts and Blocking Locks

    SQL Timeouts and Blocking Locks
    Just wanted to check in and see if anyone here has feedback on application settings, ColdFusion settings, JBOSS settings or other settings that could help to limit or remove SQL Timeouts and blocking locks on SID's.
    We're using MS SQL 2000 with JBOSS and IIS5.
    We've been seeing the following error in our logs that starts blocking locks in SQL:
    java.sql.SQLException: [newScale] [SQLServer JDBC Drive] [SQLServer] Lock request time out period exceeded.
    Once this happens, we're hosed until we remove the blocking SID in SQL.  These are the connections to the application.
    Any feedback would be great.  Thanks!

    Hi
    This is your exact solution:
    Select a.username, a.sid, a.serial#, b.id1, c.sql_text
    From v$session a, v$lock b, v$sqltext c
    Where b.id1 in( Select distinct e.id1
    from v$session d , v$lock e
    where d.lockwait = e.kaddr ) and
    a.sid = b.sid and
    c.hash_value = a.sql_hash_value and
    b.request =0;
    Thanks
    Sarju
    Oracle DBA
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by I'm clueless:
    Can someone give me the SQL statement to
    show if there are any blocking database locks and if so - which user is locking the Database?
    Thanks in Advance<HR></BLOCKQUOTE>
    null

  • HT204266 Updated and lost EVERYTHING! How do I get my data back??

    Updated to iOS 6.1.2 and lost EVERYTHING!  Apps, files, notes, 6 months of data tracking all gone and MUST have for work.  Lost some apps that iTunes doesn't have listed anymore, nor are they showing up in my purchased apps.  Again, I need these for work!

    Yeah, I tried that.  I get this dumb "supervised by another computer" message and it won't even let me connect it to the computer. 

  • Session timeout and custom sso

    Hi,
    can anyone tell me how the session and idle timeout feature in Apex exactly works?
    I built several applications in a workspace and do a sso authorization by setting a common cookie name. In addition to that i set the values for session length and idle timeout and assumed that the session length would be synchronized over all applications. But this doesn't seem to work. For instance, i set the idle timeout to 10 minutes in all applications and now i work for 15 minutes continously in application A and after that i switch over to application B (using the same session id!), the session is already expired in B.
    Is this behavior correct? And, if yes, how can i set up a synchronization over all applications?
    Jens

    Anyone?

  • Is there a risk of setting a console connection timeout and what is the recommended setting?

    Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

    Hi Henrik
    depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
    it realy depends how secure is your space and how much security you need.
    and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
    HTH
    Patrick

  • When I bring up my Mozillafirefox, all I get is a window with a blank white screen. (I 'reinstalled' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks as a result therein), and hope I can get my firefox back this time without having t

    When I bring up my Mozillafirefox, all I get is a window with a blank white screen, (and the firefox logo). (After using Firefox very happily for over a year, I had to 'reinstall' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks as a result therein), and hope I can get my firefox back this time without having to reinstall. Mozilla Firefox is still listed as one of my active programs). HELP! Is there a way to get my firefox back without reinstalling? Many thanks!
    == This happened ==
    Every time Firefox opened
    == June 30, 2010 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)

    same problem. wtf. just happened one day when i went to use it. nothing out of the ordinary installed either....

  • What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

    Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

    Any call made from the API will automatically be set to the “Session Timeout” period, no matter
    what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
    Short Session Timeout and Session Timeout in Excel Services
    Short Session Timeout and Session Timeout in Excel Services - Part 2
    Sessions and session time-outs in Excel Services
    above links are from old version but still applies to all.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

Maybe you are looking for