Repeater not Executing

I am working on a project and using the repeter and all the
data elements work except thost that are attached to the URL. I get
the oh so not helpful error "Repeater not Executing". My guess is
that I will need some type of event listener, but if somebody can
explain why it would be appreciated. Just trying to learn.

Hello,
I am having the same type of error and it's been weeks now that I can't find the solution.
Inside the repeater I have repeating VBox-es which have ohter components inside.
A function initializes their inner components and getRepeaterItem() doesn't help me at all in this case. plus for other modules i've always used currentItem.
The code is partially like that:
 
<mx:VBox>
 <mx:ViewStack id="mainView" childIndexChange="(sectionChanged(event))" width="100%" height="100%">
 <mx:Repeater
 id="sectionRepeat" repeatEnd="{tabContainer.selectedIndex = 0}" dataProvider="{model.dialogue.sections}" >
 <components:DialogueSection section="{sectionRepeat.currentItem as DialogueSectionVO}"/>
 </mx:Repeater>
 </mx:ViewStack>
</mx:VBox>

Similar Messages

Repeater is Not Executing

Hello,
I'm working on a Flex application with many nested modules and fairly complex Cairngorm architecture.
In the main application I load a module which contains a Repeating vBox component, which has othe components inside.
An event is triggered when the module is initially loaded and fills the repeating vBoxes with content coming from xml file.
the code is like that:
 <mx:VBox>
 <mx:ViewStack id="mainView" childIndexChange="(sectionChanged(event))" width="100%" height="100%">
 <mx:Repeater
 id="sectionRepeat" repeatEnd="{tabContainer.selectedIndex = 0}" dataProvider="{model.dialogue.sections}" >
 <components:DialogueSection section="{sectionRepeat.currentItem as DialogueSectionVO}"/>
 </mx:Repeater>
 </mx:ViewStack>
 </mx:VBox>
I know that the problem consists that the function is accessing the Repeater item with currentItem but getRepeaterItem() still doesn't work for me.
I get a Repeater is not Executing Error and then everything continues to work fine after I press Dismis All.
Please, anyone can suggest a solution for that?
Sincerely,
klajdi

Hello,
I'm working on a Flex application with many nested modules and fairly complex Cairngorm architecture.
In the main application I load a module which contains a Repeating vBox component, which has othe components inside.
An event is triggered when the module is initially loaded and fills the repeating vBoxes with content coming from xml file.
the code is like that:
 <mx:VBox>
 <mx:ViewStack id="mainView" childIndexChange="(sectionChanged(event))" width="100%" height="100%">
 <mx:Repeater
 id="sectionRepeat" repeatEnd="{tabContainer.selectedIndex = 0}" dataProvider="{model.dialogue.sections}" >
 <components:DialogueSection section="{sectionRepeat.currentItem as DialogueSectionVO}"/>
 </mx:Repeater>
 </mx:ViewStack>
 </mx:VBox>
I know that the problem consists that the function is accessing the Repeater item with currentItem but getRepeaterItem() still doesn't work for me.
I get a Repeater is not Executing Error and then everything continues to work fine after I press Dismis All.
Please, anyone can suggest a solution for that?
Sincerely,
klajdi

For Loop Will Not Execute

I have been a software engineer for a number of years now, and thus far I have never come across any coding issues that truly merit a post such as this. Someone has almost always run across the issue before, so there is no need to reinvent the wheel, or solution as it were.
However, a number of times I have run across instances where the JRE simply... does not execute parts of my code, and throws no exceptions.
The sample code is a simple logging application, watered down to the bare minimum for the purposes of this forum:
public class Log {
public static void main(String[] args) {Log log = new Log();}
public Log() {Logger.log("Hello World");}
import java.util.*;*
import java.io.*;
import java.text.SimpleDateFormat;
public abstract class Logger {
private static final int SIZE = 2;
private static final SimpleDateFormat DAY = new SimpleDateFormat("EEEE");
private static final String
DIR = "logs/",
EXT = ".log",
FILTER = ".*log\\z",
DNE = "DNE";
private static int i,oldest;
private static long previous = 0;
private static FileFilter filter = new LogFilter();
private static FileWriter out;
private static File file,directory;
private static File[] list;
public synchronized static void log(String param) {
try {
 directory = new File(DIR);
 file = new File(DIR + getDay() + EXT);
 list = directory.listFiles(filter);
 if (file.createNewFile()) {
 readOnly();
 reconcile();
 write(param);
catch (Exception exception) {}
private static void write(String param) throws Exception {
out = new FileWriter(file, true);
out.write(param);
out.close();
private static void readOnly() throws Exception {
for (i=0;i<list.length;i++) {list.setReadOnly();}
private static void reconcile() {
try {
previous = list[SIZE].lastModified();
oldest = SIZE;
for (i=SIZE;i<=0;i--) {
if (list[i].lastModified() <= previous) {
previous = list[i].lastModified();
oldest = i;
list[oldest].delete();
catch (Exception exception) {System.out.println("Skipping reconciliation...");}
private static String getDay() throws Exception {
return DAY.format(Calendar.getInstance().getTime());
private static class LogFilter implements FileFilter {
public LogFilter() {}
public boolean accept(File param) {
try {
if ((param.getName()).matches(FILTER)) {return true;}
else {return false;}
catch (Exception exception) {return false;}
*The problem*:
Ok, easy visual, this is the "log/" directory as I run the Log.java application repeatedly and iterate the date on my computer as I do so.
Thursday
*log/*
+Thursday.log+
Friday
*log/*
+Thursday.log+
+Friday.log+
Saturday
*log/*
+Thursday.log+
+Friday.log+
+Saturday.log+
Sunday
*log/*
+Friday.log+
+Saturday.log+
+Sunday.log+
Monday
*log/*
+Friday.log+
+Saturday.log+
+Monday.log+
This is the point at which I go ???
Turns out, the JRE skips the execution of my for loop in the *reconcile()* method when the date rolls over to Monday, and from then on it simply deletes the previous day's log instead of the oldest log.
Why? Who knows.
Things I have tried:
- Using another variable integer for the *readOnly()* method
- Removing the synchronized keyword from the *log(String param)* method
- Second call to *directory.listFiles(filter)* and setting *SIZE* to *3* after the old files have been set to read-only
- Removing the call to *readOnly()*
- Verified that the call to *readOnly()* does not alter the +modified+ date on the log files
- Changed Logger.java from a +static+ class to a +local+ class
Things I cannot do:
This log application stores privy information about end-users at locations across the country in the event that there are support issues that need to be resolved, and the agreement is that we store this information no more than three days. Just wanted to make sure, that the hopefully informed respondants to this issue, know that the obvious solution (storing seven day records), is unfortunately not available to me.
Edited by: Threadstorm on Jan 8, 2009 8:24 AM

HA! Most excellent. The last place I would ever look.
Yes, seems like Java sorts the files in such a way that everything works fine without the loop until Monday rolls over.
Now I can have a better appreciation for that second set of eyes.
I use for loops so frequently that I never look at them (though I did stare at this one myself prior to this post, much to my chagrin now) but the subtracting iteration (which I use once in a blue moon) was necessary for the nature of the code.
But ok, up and running! (whew) was going to be a long day until now.
To answer your question though, the Logger is static so I don't have to pass it around to dozens and dozens of other modules but rather just include the package on the fly as I develop new modules that need to log information, and I like to write most mundane things myself if I can, that way I have the freedom to modify them at will.
Thanks again! I'm now a happy camper once more.
I'm also thankful that I don't have to chalk up another notch on the wall of cases where the JRE behaves magically and truly ignores code which I have definitely run into before. Something about listCellRenderers and the order of calls made to them, or some such and JRE doesn't read one of the lines. It's been a year or two.
Edited by: Threadstorm on Jan 8, 2009 8:47 AM

The VI is not executable. The full development version...

"The VI is not executable. The full development version of LabVIEW is required to fix the errors." That is the error I've been dealing with all day. Actually it is repeated 3 to 4 times in the error message, seen when first launching the EXE. Also of note is that the run-arrow is broken. This is in an EXE that was developed well before version 2013, but I recently upgraded it to 2013 to hopefully fix some random LVRT crashes. There is obviously no issue running the code on my development machine, only once it's deployed.
The good news is I've been able to solve the problem (mostly). My EXE now runs without the errors. I found that the problem wasn't actually in the EXE.
We have a separate project with no files, but in the build specification we have the LabVIEW 2013 Run-Time Engine, as well as NI-VISA for serial support. We then bundle the deployment in a self-extracting RAR and it does its business. In the past this has worked just fine, but with LV2013, it seems that there is a component missing from the deployment.
I found that if I download the Run-Time Engine directly from NI.com and run it, the only things I need to install are the Run-Time Engine, and the DEPLOYABLE LICENSE. If I do this, my EXE runs great, but with the custom installer, it is not included for some reason!
Putting aside the fact that I don't know why the Deployable License package is needed (we aren't connecting to remote panels), I can't seem to modify my custom installer to install the Deployable License. There are versions for LabVIEW 2009 and 2011 SP1 in the Additional Installers list, but I don't see 2013.
Can anyone explain why this is??? For now I will just distribute the 257MB Run-Time Engine and the NI-VISA installers separately I guess. But I'd really like to get back to a single, simple package to install all the prerequisites we need. HELP!

iannicholson wrote:
Yes, but then every installer I build will contain the runtime engine. That gets very large very quick. So I have an installer for JUST the runtime engine and VISA runtime.
Just remove them from the "Additional Installers" tab of the Installer dialog.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported la

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

BPM send step not executed in BPM (after Message split)

Hello everybody,
we use BPM:
We have a paralell Block which should send the rows of a multiline element. In SXMB_BPE_MONI the send step is not executed?
Any idea?
Thanks lot, regards Mario

HI,
Go to SXMB_MONI_BPE->and check the workflow log (technical details).and go to SXI_CACHE and check the return code of the Integration Process. It should be zero. If not try to activate the same
If there is no error then go with like this-
Also check the Syntax in Integration Repository with F7. Change the IP and activate it. If there is no syntax errors.
Then reimport the IP into Directory and then test your scenario
Regards,
Moorthy

MS Office Report (Report Generation toolkit) is not executable, Xnode broken?

Hi, I am trying to generate an excel report, and I figured it would be easier to use the MS Office report VI, but I am getting the broken arrow saying the SubVI is not executable and that the library that defines the xnode is broken... here is a screensot attached, I already uninstall and reinstall the report generation toolkit and still the same... this is what I found on NI: "This error occurs when the library that defines the XNode you used is broken. To correct this error, reconfigure the XNode." but no idea how to reconfigure xnode
Attachments:
Error.png ‏67 KB

What version of LabVIEW are you using?
What is the nature of your Report? What should it look like? What kind of data should it contain?
Can you show us some code that you've tried to use? If so, include the code as either a Snippet or as a VI attachment (so we can plug it into our own LabVIEW installations and experiment with it).
I generally find that the Report Generation Toolkit is a very easy way to generate Excel Workbooks. I work primarily with LabVIEW 2012 and LabVIEW 2014.
Bob Schor

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

I get a "vi is not executable" error when building an application.

I have an ongoing project that has worked fine in the past when building an application. I have recently added some report generation toolkit vis(Excel) and get an error for some of the ni vis and some of my own that call lower level excel vis. The error is that he vi is not executable, however they run fine in the development environment. I do not get this error if I save all vi's into one llb with save with options command and then build. However, when I try to run the app, this error re-appears. Also, do I have to add the dynamically loaded vi's that are part of the toolkit in my build script? Could this be the cause of the problem? If so, what's the best way to find all of them? Any suggestions?

You have hit in on the nail! You do need to add the dynamically loaded VIs when you are creating an executable from your VI. You need to add _wordsub.lib and _exclsub.lib as dynamically loaded VIs into your executable. Try this and let us know if you have any more problems with it.
J.R. Allen

PROCEDURE IS NOT EXECUTED WITH IN THE DATABASE TRIGGER

The follwing databse trigger works fine but the procedure lv_calc_pkg.p_orders_executed(:new.stock_code,:new.selling,:new.buying,:new.qty,:new.price); is not executed
please help
CREATE OR REPLACE TRIGGER SE.LV_SUMMARY_TRADE_TR
AFTER INSERT
ON SE.LV_DAILY_TRADES
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
vstock gn_stocks.stock_code%TYPE;
CURSOR stock_cur
IS
SELECT stock_code
FROM lv_trade_summary
WHERE stock_code = :NEW.stock_code;
BEGIN
OPEN stock_cur;
FETCH stock_cur
INTO vstock;
IF stock_cur%NOTFOUND
THEN
INSERT INTO lv_trade_summary(
     the_time,
     the_date,
     stock_code,
     stock_type_id,
     market_id,
     deals,
     price,
     qty,
     trade_value,
     le_value,
     buying,
     selling,
     rec_count,
     rec_serial,
     buying_count,
     close_price,
     coupon_value,
     currency,
     dividend_yield_perc,
     eps,
     free_stocks,
     hi_offer,
     hi_req,
     hi_req_qty,
     high_date,
     high_price,
     last_offer,
     last_request,
     last_trade_date,
     less_offer,
     less_offer_qty,
     less_request,
     liquid,
     low_date,
     low_price,
     market_cap,
     off_count,
     prev_close,
     prop_avg_ofr_10,
     prop_avg_rqst_10,
     prop_avg_ofr_5,
     prop_avg_rqst_5,
     prop_avg_offers,
     prop_avg_rqst,
     req_count,
     rqst_to_offers,
     sector_desc_a,
     sector_desc_e,
     selling_count,
     simple_avg_ofrs_10,
     simple_avg_rqst_10,
     simple_avg_ofr_5,
     simple_avg_rqst_5,
     simple_avg_offers,
     simple_avg_rqst,
     stock_count,
     stock_desc_a,
     stock_desc_e,
     sum_less_ofr_10,
     sum_less_rqst_10,
     sum_less_5_rqst,
     sum_offer,
     sum_volume_traded,
     trx_count,
     sum_request,
     last_request_qty,
     last_offer_qty )
VALUES (
     :NEW.the_time,
     :NEW.the_date,
     :NEW.stock_code,
     :NEW.stock_type_id,
     :NEW.market_id,
     :NEW.deals,
     :NEW.price,
     :NEW.qty,
     :NEW.trade_value,
     :NEW.le_value,
     :NEW.buying,
     :NEW.selling,
     :NEW.rec_count,
     :NEW.rec_serial,
     lv_calc_pkg.f_buying_count (:NEW.stock_code),
     lv_calc_pkg.f_close_price (:NEW.stock_code),
     lv_calc_pkg.f_coupon_value (:NEW.stock_code),
     lv_calc_pkg.f_currency (:NEW.stock_code),
     lv_calc_pkg.f_dividend_yield_perc (:NEW.stock_code),
     lv_calc_pkg.f_eps (:NEW.stock_code),
     lv_calc_pkg.f_free_stocks (:NEW.stock_code),
     lv_calc_pkg.f_hi_offer (:NEW.stock_code),
     lv_calc_pkg.f_hi_request (:NEW.stock_code),
     lv_calc_pkg.f_hi_request_qty (:NEW.stock_code),
     lv_calc_pkg.F_HIGH_DATE (:new.stock_code),
     lv_calc_pkg.F_HIGH_price (:new.stock_code),
     lv_calc_pkg.f_last_offer (:NEW.stock_code),
     lv_calc_pkg.f_last_request (:NEW.stock_code),
     lv_calc_pkg. F_LAST_TRADE_DATE(:new.stock_code),
     lv_calc_pkg.f_less_offer (:NEW.stock_code),
     lv_calc_pkg.f_less_offer_qty (:NEW.stock_code),
     lv_calc_pkg.f_less_request (:NEW.stock_code),
     lv_calc_pkg.f_liquid (:NEW.stock_code),
     lv_calc_pkg.f_low_date(:new.stock_code),
     lv_calc_pkg.f_low_price(:new.stock_code),
     lv_calc_pkg.f_market_cap(:new.stock_code),
     lv_calc_pkg.f_off_count (:NEW.stock_code),
     lv_calc_pkg.f_prev_close (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_best_10_ofrs (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_best_10_rqst (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_best_5_ofrs (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_best_5_rqst (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_offers (:NEW.stock_code),
     lv_calc_pkg.f_prop_avg_rqst (:NEW.stock_code),
     lv_calc_pkg.f_req_count (:NEW.stock_code),
     lv_calc_pkg.f_rqst_to_offers (:NEW.stock_code),
     lv_calc_pkg.f_sector_desc_a(:new.stock_code),
     lv_calc_pkg.f_sector_desc_e(:new.stock_code),
     lv_calc_pkg.f_selling_count (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_best_10_ofrs (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_best_10_rqst (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_best_5_ofrs (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_best_5_rqst (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_offers (:NEW.stock_code),
     lv_calc_pkg.f_simple_avg_rqst (:NEW.stock_code),
     lv_calc_pkg.f_stock_count (:NEW.stock_code),
     lv_calc_pkg.f_stock_desc_a(:new.stock_code),
     lv_calc_pkg.f_stock_desc_e(:new.stock_code),
     lv_calc_pkg.f_sum_less_10_offers,
     lv_calc_pkg.f_sum_less_10_rqst,
     lv_calc_pkg.f_sum_less_5_rqst,
     lv_calc_pkg.f_sum_offerst (:NEW.stock_code),
     lv_calc_pkg.f_sum_volume_traded (:NEW.stock_code),
     lv_calc_pkg.f_trx_count (:NEW.stock_code),
     lv_calc_pkg.f_sum_request (:NEW.stock_code),
     lv_calc_pkg.f_last_request_qty (:NEW.stock_code),
     lv_calc_pkg.f_last_offer_qty (:NEW.stock_code) );
ELSIF stock_cur%FOUND THEN
     UPDATE lv_trade_summary
     SET the_time = :NEW.the_time,
     deals = :NEW.deals,
     price = :NEW.price,
     qty = :NEW.qty,
     trade_value = :NEW.trade_value,
     le_value = :NEW.le_value,
     buying = :NEW.buying,
     selling = :NEW.selling,
     rec_count = :NEW.rec_count,
     rec_serial = :NEW.rec_serial,
     buying_count = lv_calc_pkg.f_buying_count (:NEW.stock_code),
     close_price = lv_calc_pkg.f_close_price (:NEW.stock_code),
     coupon_value = lv_calc_pkg.f_coupon_value (:NEW.stock_code),
     currency = lv_calc_pkg.f_currency (:NEW.stock_code),
     dividend_yield_perc =
     lv_calc_pkg.f_dividend_yield_perc (:NEW.stock_code),
     hi_offer = lv_calc_pkg.f_hi_offer (:NEW.stock_code),
     hi_req = lv_calc_pkg.f_hi_request (:NEW.stock_code),
     hi_req_qty = lv_calc_pkg.f_hi_request_qty (:NEW.stock_code),
     last_offer = lv_calc_pkg.f_last_offer (:NEW.stock_code),
     last_request = lv_calc_pkg.f_last_request (:NEW.stock_code),
     last_trade_date = lv_calc_pkg.f_last_trade_date (:NEW.stock_code),
     less_offer = lv_calc_pkg.f_less_offer (:NEW.stock_code),
     less_offer_qty = lv_calc_pkg.f_less_offer_qty (:NEW.stock_code),
     less_request = lv_calc_pkg.f_less_request (:NEW.stock_code),
     liquid = lv_calc_pkg.f_liquid (:NEW.stock_code),
     off_count = lv_calc_pkg.f_off_count (:NEW.stock_code),
     prev_close = lv_calc_pkg.f_prev_close (:NEW.stock_code),
     prop_avg_ofr_10 =
     lv_calc_pkg.f_prop_avg_best_10_ofrs (:NEW.stock_code),
     prop_avg_rqst_10 =
     lv_calc_pkg.f_prop_avg_best_10_rqst (:NEW.stock_code),
     prop_avg_ofr_5 =
     lv_calc_pkg.f_prop_avg_best_5_ofrs (:NEW.stock_code),
     prop_avg_rqst_5 =
     lv_calc_pkg.f_prop_avg_best_5_rqst (:NEW.stock_code),
     prop_avg_offers = lv_calc_pkg.f_prop_avg_offers (:NEW.stock_code),
     prop_avg_rqst = lv_calc_pkg.f_prop_avg_rqst (:NEW.stock_code),
     req_count = lv_calc_pkg.f_req_count (:NEW.stock_code),
     rqst_to_offers = lv_calc_pkg.f_rqst_to_offers (:NEW.stock_code),
     sector_desc_a = lv_calc_pkg.f_sector_desc_a (:NEW.stock_code),
     sector_desc_e = lv_calc_pkg.f_sector_desc_e (:NEW.stock_code),
     selling_count = lv_calc_pkg.f_selling_count (:NEW.stock_code),
     simple_avg_ofrs_10 =
     lv_calc_pkg.f_simple_avg_best_10_ofrs (:NEW.stock_code),
     simple_avg_rqst_10 =
     lv_calc_pkg.f_simple_avg_best_10_rqst (:NEW.stock_code),
     simple_avg_ofr_5 =
     lv_calc_pkg.f_simple_avg_best_5_ofrs (:NEW.stock_code),
     simple_avg_rqst_5 =
     lv_calc_pkg.f_simple_avg_best_5_rqst (:NEW.stock_code),
     simple_avg_offers =
     lv_calc_pkg.f_simple_avg_offers (:NEW.stock_code),
     simple_avg_rqst = lv_calc_pkg.f_simple_avg_rqst (:NEW.stock_code),
     stock_count = lv_calc_pkg.f_stock_count (:NEW.stock_code),
     stock_desc_a = lv_calc_pkg.f_stock_desc_a (:NEW.stock_code),
     stock_desc_e = lv_calc_pkg.f_stock_desc_e (:NEW.stock_code),
     sum_less_ofr_10 = lv_calc_pkg.f_sum_less_10_offers,
     sum_less_rqst_10 = lv_calc_pkg.f_sum_less_10_rqst,
     sum_less_5_rqst = lv_calc_pkg.f_sum_less_5_rqst,
     sum_offer = lv_calc_pkg.f_sum_offerst (:NEW.stock_code),
     sum_volume_traded =
     lv_calc_pkg.f_sum_volume_traded (:NEW.stock_code),
     trx_count = lv_calc_pkg.f_trx_count (:NEW.stock_code),
     sum_request = lv_calc_pkg.f_sum_request (:NEW.stock_code),
     last_request_qty = lv_calc_pkg.f_last_request_qty (:NEW.stock_code),
     last_offer_qty = lv_calc_pkg.f_last_offer_qty (:NEW.stock_code)
     WHERE stock_code = :NEW.stock_code;
END IF;
lv_calc_pkg.p_orders_executed(:new.stock_code,:new.selling,:new.buying,:new.qty,:new.price);
CLOSE stock_cur;
END;

Well, you can use merge statement or exception :
CREATE OR REPLACE TRIGGER SE.LV_SUMMARY_TRADE_TR
AFTER INSERT
ON SE.LV_DAILY_TRADES
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
     BEGIN
          UPDATE lv_trade_summary
          SET the_time = :NEW.the_time,
          deals = :NEW.deals,
          price = :NEW.price,
          qty = :NEW.qty,
          trade_value = :NEW.trade_value,
          le_value = :NEW.le_value,
          buying = :NEW.buying,
          selling = :NEW.selling,
          rec_count = :NEW.rec_count,
          rec_serial = :NEW.rec_serial,
          buying_count = lv_calc_pkg.f_buying_count (:NEW.stock_code),
          close_price = lv_calc_pkg.f_close_price (:NEW.stock_code),
          coupon_value = lv_calc_pkg.f_coupon_value (:NEW.stock_code),
          currency = lv_calc_pkg.f_currency (:NEW.stock_code),
          dividend_yield_perc =
          lv_calc_pkg.f_dividend_yield_perc (:NEW.stock_code),
          hi_offer = lv_calc_pkg.f_hi_offer (:NEW.stock_code),
          hi_req = lv_calc_pkg.f_hi_request (:NEW.stock_code),
          hi_req_qty = lv_calc_pkg.f_hi_request_qty (:NEW.stock_code),
          last_offer = lv_calc_pkg.f_last_offer (:NEW.stock_code),
          last_request = lv_calc_pkg.f_last_request (:NEW.stock_code),
          last_trade_date = lv_calc_pkg.f_last_trade_date (:NEW.stock_code),
          less_offer = lv_calc_pkg.f_less_offer (:NEW.stock_code),
          less_offer_qty = lv_calc_pkg.f_less_offer_qty (:NEW.stock_code),
          less_request = lv_calc_pkg.f_less_request (:NEW.stock_code),
          liquid = lv_calc_pkg.f_liquid (:NEW.stock_code),
          off_count = lv_calc_pkg.f_off_count (:NEW.stock_code),
          prev_close = lv_calc_pkg.f_prev_close (:NEW.stock_code),
          prop_avg_ofr_10 =
          lv_calc_pkg.f_prop_avg_best_10_ofrs (:NEW.stock_code),
          prop_avg_rqst_10 =
          lv_calc_pkg.f_prop_avg_best_10_rqst (:NEW.stock_code),
          prop_avg_ofr_5 =
          lv_calc_pkg.f_prop_avg_best_5_ofrs (:NEW.stock_code),
          prop_avg_rqst_5 =
          lv_calc_pkg.f_prop_avg_best_5_rqst (:NEW.stock_code),
          prop_avg_offers = lv_calc_pkg.f_prop_avg_offers (:NEW.stock_code),
          prop_avg_rqst = lv_calc_pkg.f_prop_avg_rqst (:NEW.stock_code),
          req_count = lv_calc_pkg.f_req_count (:NEW.stock_code),
          rqst_to_offers = lv_calc_pkg.f_rqst_to_offers (:NEW.stock_code),
          sector_desc_a = lv_calc_pkg.f_sector_desc_a (:NEW.stock_code),
          sector_desc_e = lv_calc_pkg.f_sector_desc_e (:NEW.stock_code),
          selling_count = lv_calc_pkg.f_selling_count (:NEW.stock_code),
          simple_avg_ofrs_10 =
          lv_calc_pkg.f_simple_avg_best_10_ofrs (:NEW.stock_code),
          simple_avg_rqst_10 =
          lv_calc_pkg.f_simple_avg_best_10_rqst (:NEW.stock_code),
          simple_avg_ofr_5 =
          lv_calc_pkg.f_simple_avg_best_5_ofrs (:NEW.stock_code),
          simple_avg_rqst_5 =
          lv_calc_pkg.f_simple_avg_best_5_rqst (:NEW.stock_code),
          simple_avg_offers =
          lv_calc_pkg.f_simple_avg_offers (:NEW.stock_code),
          simple_avg_rqst = lv_calc_pkg.f_simple_avg_rqst (:NEW.stock_code),
          stock_count = lv_calc_pkg.f_stock_count (:NEW.stock_code),
          stock_desc_a = lv_calc_pkg.f_stock_desc_a (:NEW.stock_code),
          stock_desc_e = lv_calc_pkg.f_stock_desc_e (:NEW.stock_code),
          sum_less_ofr_10 = lv_calc_pkg.f_sum_less_10_offers,
          sum_less_rqst_10 = lv_calc_pkg.f_sum_less_10_rqst,
          sum_less_5_rqst = lv_calc_pkg.f_sum_less_5_rqst,
          sum_offer = lv_calc_pkg.f_sum_offerst (:NEW.stock_code),
          sum_volume_traded =
          lv_calc_pkg.f_sum_volume_traded (:NEW.stock_code),
          trx_count = lv_calc_pkg.f_trx_count (:NEW.stock_code),
          sum_request = lv_calc_pkg.f_sum_request (:NEW.stock_code),
          last_request_qty = lv_calc_pkg.f_last_request_qty (:NEW.stock_code),
          last_offer_qty = lv_calc_pkg.f_last_offer_qty (:NEW.stock_code)
          WHERE stock_code = :NEW.stock_code;
     EXCEPTION WHEN OTHERS THEN
          INSERT INTO lv_trade_summary(
          the_time,
          the_date,
          stock_code,
          stock_type_id,
          market_id,
          deals,
          price,
          qty,
          trade_value,
          le_value,
          buying,
          selling,
          rec_count,
          rec_serial,
          buying_count,
          close_price,
          coupon_value,
          currency,
          dividend_yield_perc,
          eps,
          free_stocks,
          hi_offer,
          hi_req,
          hi_req_qty,
          high_date,
          high_price,
          last_offer,
          last_request,
          last_trade_date,
          less_offer,
          less_offer_qty,
          less_request,
          liquid,
          low_date,
          low_price,
          market_cap,
          off_count,
          prev_close,
          prop_avg_ofr_10,
          prop_avg_rqst_10,
          prop_avg_ofr_5,
          prop_avg_rqst_5,
          prop_avg_offers,
          prop_avg_rqst,
          req_count,
          rqst_to_offers,
          sector_desc_a,
          sector_desc_e,
          selling_count,
          simple_avg_ofrs_10,
          simple_avg_rqst_10,
          simple_avg_ofr_5,
          simple_avg_rqst_5,
          simple_avg_offers,
          simple_avg_rqst,
          stock_count,
          stock_desc_a,
          stock_desc_e,
          sum_less_ofr_10,
          sum_less_rqst_10,
          sum_less_5_rqst,
          sum_offer,
          sum_volume_traded,
          trx_count,
          sum_request,
          last_request_qty,
          last_offer_qty )
          VALUES (
          :NEW.the_time,
          :NEW.the_date,
          :NEW.stock_code,
          :NEW.stock_type_id,
          :NEW.market_id,
          :NEW.deals,
          :NEW.price,
          :NEW.qty,
          :NEW.trade_value,
          :NEW.le_value,
          :NEW.buying,
          :NEW.selling,
          :NEW.rec_count,
          :NEW.rec_serial,
          lv_calc_pkg.f_buying_count (:NEW.stock_code),
          lv_calc_pkg.f_close_price (:NEW.stock_code),
          lv_calc_pkg.f_coupon_value (:NEW.stock_code),
          lv_calc_pkg.f_currency (:NEW.stock_code),
          lv_calc_pkg.f_dividend_yield_perc (:NEW.stock_code),
          lv_calc_pkg.f_eps (:NEW.stock_code),
          lv_calc_pkg.f_free_stocks (:NEW.stock_code),
          lv_calc_pkg.f_hi_offer (:NEW.stock_code),
          lv_calc_pkg.f_hi_request (:NEW.stock_code),
          lv_calc_pkg.f_hi_request_qty (:NEW.stock_code),
          lv_calc_pkg.F_HIGH_DATE (:new.stock_code),
          lv_calc_pkg.F_HIGH_price (:new.stock_code),
          lv_calc_pkg.f_last_offer (:NEW.stock_code),
          lv_calc_pkg.f_last_request (:NEW.stock_code),
          lv_calc_pkg. F_LAST_TRADE_DATE(:new.stock_code),
          lv_calc_pkg.f_less_offer (:NEW.stock_code),
          lv_calc_pkg.f_less_offer_qty (:NEW.stock_code),
          lv_calc_pkg.f_less_request (:NEW.stock_code),
          lv_calc_pkg.f_liquid (:NEW.stock_code),
          lv_calc_pkg.f_low_date(:new.stock_code),
          lv_calc_pkg.f_low_price(:new.stock_code),
          lv_calc_pkg.f_market_cap(:new.stock_code),
          lv_calc_pkg.f_off_count (:NEW.stock_code),
          lv_calc_pkg.f_prev_close (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_best_10_ofrs (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_best_10_rqst (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_best_5_ofrs (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_best_5_rqst (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_offers (:NEW.stock_code),
          lv_calc_pkg.f_prop_avg_rqst (:NEW.stock_code),
          lv_calc_pkg.f_req_count (:NEW.stock_code),
          lv_calc_pkg.f_rqst_to_offers (:NEW.stock_code),
          lv_calc_pkg.f_sector_desc_a(:new.stock_code),
          lv_calc_pkg.f_sector_desc_e(:new.stock_code),
          lv_calc_pkg.f_selling_count (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_best_10_ofrs (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_best_10_rqst (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_best_5_ofrs (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_best_5_rqst (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_offers (:NEW.stock_code),
          lv_calc_pkg.f_simple_avg_rqst (:NEW.stock_code),
          lv_calc_pkg.f_stock_count (:NEW.stock_code),
          lv_calc_pkg.f_stock_desc_a(:new.stock_code),
          lv_calc_pkg.f_stock_desc_e(:new.stock_code),
          lv_calc_pkg.f_sum_less_10_offers,
          lv_calc_pkg.f_sum_less_10_rqst,
          lv_calc_pkg.f_sum_less_5_rqst,
          lv_calc_pkg.f_sum_offerst (:NEW.stock_code),
          lv_calc_pkg.f_sum_volume_traded (:NEW.stock_code),
          lv_calc_pkg.f_trx_count (:NEW.stock_code),
          lv_calc_pkg.f_sum_request (:NEW.stock_code),
          lv_calc_pkg.f_last_request_qty (:NEW.stock_code),
          lv_calc_pkg.f_last_offer_qty (:NEW.stock_code) );
     END;
     lv_calc_pkg.p_orders_executed(:new.stock_code,:new.selling,:new.buying,:new.qty,:new.price);
END;
/Nicolas.

SSIS Script task not executing macro through SQL Agent (but it does through bids)

Hello everyone,I am having an issue with SQL Agent when executing a macro contained in a script task component. The script task actually opens an excel file, runs the macro, save and closes the file. When
I execute the package via BIDS/Visual studio, it works like a charm. However, when i execute the package with SQL agent, the package runs successfully but it seems that the macro is not executed as the excel file has not been modified as it should have. Also,
the history log does not show any error messages. Could 

Thanks!I did create a credential and a proxy too but still the macro is not executed.I have searched online for solutions but no one has experimented this kind of issue before it seems. Please have a look at the script task code:
Imports
Excel = Microsoft.Office.Interop.Excel
Imports
System
Imports
System.Data
Imports
System.Math
Imports
Microsoft.SqlServer.Dts.Runtime
<System.AddIn.AddIn(
"ScriptMain", Version:="1.0",
Publisher:="", Description:="")>
<System.CLSCompliantAttribute(
False)> _
Partial
Public
Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End
Enum
Public
Sub Main()
Dim Macro_name
As
String
Dim ExcelObject
As
New Microsoft.Office.Interop.Excel.Application
Dim oBook
As Microsoft.Office.Interop.Excel.Workbook
Dim oBooks
As Microsoft.Office.Interop.Excel.Workbooks
Try
Macro_name =
"Macro001"
ExcelObject =
CType(CreateObject("Excel.Application"),
Excel.Application)
ExcelObject.Visible =
True
ExcelObject.UserControl =
False
ExcelObject.DisplayAlerts =
False
oBooks = ExcelObject.Workbooks
oBook =
CType(oBooks.Open("C\Book1.xls"),
Excel.WorkbookClass)
ExcelObject.Run(Macro_name)
Catch ex
As Exception
ExcelObject.Application.Quit()
ExcelObject.DisplayAlerts =
True
ExcelObject =
Nothing
End
Try
Dts.TaskResult = ScriptResults.Success
End
Sub
End
Class

Error message "VI is not executable"! Need help with Application Builder

Hello,
I have a problem with an application, built with the Application Builder. I have read some threads about the problem I have, but I still don't know a solution.
When I run my front panel from LabVIEW, everything is good. So, now I created an application (and an installer) to be able to run it on other PCs as well. This application does not work. Everytime I start it on my PC, I get the error "VI is not executable. ...". I read in several forums solutions for this error, but I cannot fix it! I've changed my properties for the builder, but with no success. Perhaps, anybody has more ideas, what's the problem.
To get a better idea from my project, here a little description of it:
In the block diagram there is a while loop which is continuously runned. In this loop I only set some properties for the layout of the front panel, such as decorations which will be hidden/shown and changes of colours of indicators... For the rest, it waits for a click on the button "Start" in the front panel. After that, a DLL is called to communicate with a USB device. Some measurements are carried out and the DLL is closed. I hope, you can get a global idea from my block diagram...
I use LabVIEW 8.5, the DLL is a third-party DLL, which we wrote on our own. But I think the DLL works properly, if it is called from a C# application it works and it works, too, by calling it from LabVIEW when I am in development mode.
It's a project for university and I'm just a beginner in LabVIEW, so I don't have so much experiences in it, but I think i improved my knowlegde about LabVIEW very well in the last weeks!
So, i hope to get an answer soon (the deadline for the project is not soooo far away )
If you need more information, please let it know...
I would be very grateful if there is someone with a working solution...
Kind regards from the Netherlands,
Sebastian

Sebastian,
Your architecture makes it very difficult to debug this and other problems. Does the error message mention which VI is causing the problem? It is very important to wire your error clusters everywhere. In LabVIEW, when a node throws an error (Error.Status = T), future nodes do not execute. At the end, place an error cluster indicator that you can see on your front panel. When an error posts, you can right click the indicator (even in a compiled application) and select "Explain Error".
This is a start, but you really need to push this into a queued-state machine before this gets any more complicated. As it were, if anything in your loop hangs, your whole application hangs. See attached for a queued-message handler (not advisable for actual applications, but you get the point. You would want to have a type defined enum in lieu of strings, and shared data between states differently, etc.)
-Jason
Message Edited by LabBEAN on 01-20-2009 08:36 AM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs
Attachments:
State Machine.vi ‏18 KB

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

PO Response approval Work item is not executing from approver inbox.

Hi,
PO Response approval Work item is not executing from approver inbox. After click the approve button system is not showing any error and also work item is not clearing from user inbox. When we checked the status of the work item in SWI1 Transaction is still READY.
Standard Task: TS14508055 - Transfer purchase order response data to purchase order
Business Object: BUS2209
Scenario:
1. Create PO in SRM System, Vendor belongs to SUS System Vendor
2. SUS Vendor creates the PO Response SUS system, POR Value is greater Than PO Value
3. Approval Work item will go to Buyers of purchasing group
4. Buyer trying to approving The PO Response from his approval inbox
Regards,
Surya Sankar

what all buttons do you see when you open the workitem in the approval inbox.
as far as i know , there will only button 'transfer response to purchase order'..
what happens if you click the above button.

Repeater not Executing

Similar Messages

Maybe you are looking for