Repeating an event is not possible on the iphone

Hello I have noticed when you add an event on the iphone to your calendar and you need it to repeat there is no custom option to be able to select wich days of the week you need it to repeat. am I being forced to correct it on my computer or is this one of the wants we need to comunicate ti apple for the update.

http://www.apple.com/feedback/iphone.html

Similar Messages

How to resolve error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."

I inadvertently deleted my iPhone backup on my MacBook Pro. I restored iPhone to factory settings and then synced remotely with iCloud. However the error message repeatedly states:
iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again.
Any ideas as to how this can be resolved please. Thank you very much.

My wife's iPhone 5 would not backup, after upgrading to iOS 8.     The "genius" at the Apple store succeeded in DELETING, the only recent backup of her phone so
recovery became more critical.
I followed all the procedures for troubleshooting it, but still it would try to backup and then stop due to an error. We particularly wanted to preserve some game data/history/progress that she'd been working on for years.      This game (Dream Fish) would no longer open after the iOS 8 upgrade ... and the phone would not successfully backup, and so we had no confidence that it would restore from an older backup either.       I googled for solution and found Phoneview and iFunBox.      These apps allow you to see & access data files in the iPhone.      Phoneview was too fragile and crashed when copying a file any size.
I found "iFunBox".     iFunBox was excellent.      I used iFunBox to recover her game data.    It allows you to make a copy of data files that reside on the iPhone... and store them as a manual backup on the Mac.
And in the process I found 2 games that caused iFunBox to crash.      The 2 games in question were not important enough to try to keep, so I deleted them from the iPhone.
So then, I had a manual backup of the important iPhone data, and had eliminated two game files that apparently had a conflict with iOS 8.
My next Backup attempt was successful.        The iPhone with iOS 8 would now backup to both the Mac and to the Cloud.
Next I deleted Dream Fish from the iPhone and downloaded a fresh version from the Cloud.    The new Dream Fish with no history opened in iOS 8.
Then I used iFunBox to copy my wife's Dream Fish data history from the Mac back into the new game.
Once the transfer was complete, Dream Fish would now OPEN and all of her progress was there and working like normal.
Hope this helps.

Subsequent to Yosemite or updates, my repeating calendar events can not be updated as before. When I update an event (of the repeating event) on my MacBook Pro; its reverts back when I shut it down and come back, and doesn't update other devices?

Subsequent to Yosemite or updates, my repeating calendar events can not be updated as before. When I update an event (of a repeating event) on my MacBook Pro; its reverts back when I shut it down and come back, and doesn't update other devices?
Has anyone experienced this and does anyone know a fix?

This is incredibly frustrating for me too!
I have a repeated monthly event for a discount at a store that is offered on the first Tuesday of every month. So I have a repeated event taking place on the 1st of every month. In the previous month I reset next month's date from the 1st to whatever date falls on the first Tuesday.
But ever since upgrading to Yosemite, I am experiencing the same problem as the original person who posted. The date saves on my calendar but does not sync to my iCloud. When I reboot the computer, the date reverts back to the 1st.
I'm thankful I don't have any events that needed to be tracked because ALL of my previous changes in the past have reverted back to the 1st of the month. I would have been in the same terrible situation as yaz999 in having to manually change every event in previous months.
Why hasn't this bug been fixed yet???!!!

Delta extraction is not possible at the moment

Hello,
I am trying to run a delta load and am getting the message "Delta extraction is not possible at the moment". This is actually a repeat because i have tried this load multiple times with no success.
The Diagnosis in the error message is:
The delta extraction is not possible at the moment because the status list of the request is locked in the Cube. This can be for a number of reasons:
1. Another extraction is taking place in the target BI.
2. The control parameters of the request in the InfoCube are locked by deletion or compressing processes.
I dont see that any other extraction or a deletion or compression job. I've tried going through each failed job in the monitor and red lighting them but that hasnt helped. Any ideas what to check or how to fix the problem?
Regards,
TMS

Hi,
From what you are describing, there is already some process going on on the infoprovider you are trying to load the data to. Check if a data load is still active/activation is happening, if its a cube then are there aggregates and are they rolling up. You can check the process in SM66 or SM50 and the jobs in SM37.
The process has locked the infoprovider and no delta or for that matter any process can be done until the earlier one finishes. You can take help from the BASIS team to find out what is locking your infoprovider.
Cheers,
Kedar

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

HT202297 I just bought an ipad3 and I was wondering if anyone knows how to have my reminders displayed in my calendar? If it not possible on the iPad , is it possible on the iphone4s? if not, than does anyone know of any apps that make it convenient to do

I just bought an ipad3 and I was wondering if anyone knows how to have my reminders displayed in my calendar? If it not possible on the iPad , is it possible on the iphone4s? if not, than does anyone know of any apps that make it convenient to do so?

That's only for the iPhone 5. On the 4 and 4S, they can repair the back glass in store for $30. They will not replace the display on a 4 or 4S. They must replace the entire phone. Replacing the display on them requires disassembling the entire phone, which they will not do in store.

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

Subject:-Tax reduction in invoice is not possible at the time of LIV when c

Dear SAP expert
Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
Is there any solution available?
s ap

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

Use of dynpro services is not possible in the current system status

Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

Events do not appear in the photos from my iPhone only albums and location.

Events do not appear in the photos from my iPhone only albums and location. Would you helpe me?

If you are seeing your photos in "Last Import", the photos are somewhere in your library. Perhaps the dates are wrong, and you do not see the photos arranged by date, where you expect them to be.
Select one of the photos on "Last Import", then ctrl-click it and select "Show in Event". That will take you to the event in event view.

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie?

I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie?
Yrs,
Unspeakably Frustrated

Yes, you can do this. Drag the music track to the background and start adding your pictures. A great way to do this is to use beat markers so your photos will change on the beat.
A really fast way to do this is to line up your photos in an iPhoto album in the order you want them. You can drag the whole album into iMovie at once.
Here is a tutorial on the beat marker feature.
Here is a sample of a slideshow made by dragging in the music first, adding beat markers, and then adding photos.

Repeating an event is not possible on the iphone

Similar Messages

Maybe you are looking for