Repeating console message for non-existant program?

When I open console I see HUNDREDS of these messages, which repeat every few seconds:
3/11/08 3/11 8:40:43 AM com.apple.launchd[1] (com.bombich.ccc.scheduledtask.342330CE-44B0-4D4D-8E0F-2FD23B4C8163[973]) Exited with exit code: 1
I no longer have this program installed and haven't used it in MONTHS. Can anyone tell me how to get this to stop? Thanks!

Got an answer from Bombich themselves, after clearing all the info relating to CCC (Carbon Copy Cloner) and restarting my iMac the repetitive message is now gone:
"You have a schedule created by CCC v3 still trying to run. Download a fresh copy of CCC from B4 U post…. Drag CCC to anywhere, e.g. the desktop, and launch it. In CCC menu > "Scheduled Tasks..." delete all schedules (delete, not just de-activate) and "Save". Your /Library/LaunchDaemons should now contain no CCC files. You could have deleted them manually, but deleting them from within CCC is probably more advisable. I'm not sure, but you may need to re-boot for launchd to be updated.
To clear everything relating to CCC, trash:
CCC
~/Library/Preferences/com.bombich.ccc.plist
~/Library/Preferences/com.bombich.ccc_helper.plist (if it exists)
/Library/Logs/CCC.log
/Library/Logs/CCC.stats"

Similar Messages

  • More Lion issues - Throwing Console errors for non-existent application

    Again, with the bad side of Lion.
    I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
    In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to:  /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast....  and the others DON'T EVEN EXIST!!
    How do I keep this from happening?  Why does the OS go after this when it's been removed?????
    8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
    8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
    8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
    8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
    8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
    8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
    8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

    Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Problems realted to changing the language for non-Unicode programs from one into anther.

    Hi,
    Hi everyone!
    Product Name: HP Pavilion dv6-6093ex
    Product Number : LM610EA#A2N.
    My Windows 7(464Bit) Ultimate,  and its base language, and display language is English.
    The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language
    and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
    I would like anyone kindly to confirm for me why I have been facing these problems when changing  language for non-Unicode programs from English into Arabic.
    First: After I have installed the  AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs
    is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
    A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however,
    when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is
    Arabic, and it doesn't matter what format or location is.
    B- when I changed language for non-Unicode programs into 
    English.
    I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
    Second:
    A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
    B-  All the Arabic contents are displayed properly   while language for non-Unicode programs is  Arabic.
    Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
    A-  I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
    B- However  while language for non-Unicode programs is Arabic, there is no error extracting files.
    In conclusion, Is it normal
    for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while  language  used
    for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?.  IF so I would be saying that if I have wanted the  contents of documents written in my language
    Arabic to be shown properly, then then I
    must let the language for non-Unicode programs be Arabic.
    Is this happens with you as well?
    Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs
    must be in my Arabic lanague English and whatever location and format are.
    Is this happened with you as well?
    I would highly appreciate any clarification from you.
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    I am confused about your issue.
    when you changed language for non-Unicode programs into  English, it show English.
    while language for non-Unicode programs is Arabic, it show Arabic, If it's none-Unicode.
    This is correct. Why you think it's an issue?
    About your second scenario description, I was not clear what you said. Could you give us a explanation?
    Note: System display language is not the un-Unicode program language.
    You can just choose one language to display the system at same time.
    This article might be helpful to you:
    Install or change a display language
    http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
    Change the system locale
    http://windows.microsoft.com/en-in/windows/change-system-locale#1TC=windows-7
    Karen Hu
    TechNet Community Support

  • Problems realted to changing the language for non-Unicode programs

    Hi everyone!
    Product Name: HP Pavilion dv6-6093ex
    Product Number : LM610EA#A2N.
    My Windows 7(464Bit) Ultimate,  and its base language, and display language is English.
    The Languages(English, French and Arabic) built-in (came re-downloaded and re-installed by the person who made the Windows disc installation). Thus, while installing Windows 7, those three lanauge listed for me to choose one of them to be the base language and display language, I have chosen 'English'. In the End of installation, there are three pre-packaged languages(English and French and Arabic) can be used as a display language.
    I would like anyone kindly to confirm for me why I have been facing these problems when changing  language for non-Unicode programs from English into Arabic.
    First: After I have installed the  AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000 on my laptop. The contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic while language for non-Unicode programs is Arabic, however, they are completely shown in English while language for non-Unicode programs is English.
    A: I found that contents of the of Intel Graphics and Media Control Panel are partially shown in Arabic (second screen shot below, however, when click on any options, for example 'Graphics properties' shown in Arabic in, the second window is shown in English) while language for non-Unicode programs is Arabic, and it doesn't matter what format or location is.
    B- when I changed language for non-Unicode programs into  English.
    I found that contents of the Intel Graphics and Media Control Panel are completely shown in English .
    Second:
    A- Only All Arabic contents will be displayed encryptely while language for non-Unicode programs is English
    B-  All the Arabic contents are displayed properly   while language for non-Unicode programs is  Arabic.
    Third: an error extracting drivers and software downloaded from official HP website while language for non-Unicode programs is English.
    A-  I noticed an error extracting all kinds of comprised files(drivers and software) downloaded from HP website while language for non-Unicode programs is English and whatever location and format are:
    B- However  while language for non-Unicode programs is Arabic, there is no error extracting files.
    In conclusion, Is it normal for all of you the contents of the of Intel Graphics and Media Control Panel are partially shown in your native while  langauge  used for non-Unicode programs is your native lanague, however, they are completely shown in English while language for non-Unicode programs is English?.  IF so I would be saying that if I have wanted the  contents of documents written in my language Arabic to be shown properly, then then I must let the language for non-Unicode programs be Arabic. Is this happens with you as well?
    Also, if I need extracting all kinds of comprised files(drivers and software) downloaded from HP website, then language for non-Unicode programs must be in my Arabic lanague English and whatever location and format are. Is this happened with you as well?
    I would highly appreciate any clarification from you.
    This question was solved.
    View Solution.

    Hi cooperator,
    I saw your post regarding the language questions and I will be happy to help. What are you are experiencing with the languages is normal. The base operating system is in English and while you can change the display language the core kernal of the operating system would be in English.
    The reason that the Intel Graphic and Media Control Panel is in English and the rest in Arabic is because the driver would have been designed in English and is hard coded as into the driver but the display language is set to Arabic. So when the language is set to English everything will be in English.
    The reason you having issues extracting drivers when you English set at the language is because the HP website will determine where in the world you and when you download the driver it will be the appropriate language for the country you are from. So when it extracts it will look for the proper extraction path using Arabic but everything is English. It work no problem when you are on Arabic because the driver can read the path properly.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Cant Set System Locale (language for non-Unicode programs)

    Im trying to deploy custom image wherein Input language and location should be English Australia , BUT system locale (language for non-Unicode programs) should be English-us. The requirement is as below
    Standards and Formats: English (Australia)
    Location: Australia
    Default input language: English (Australia) – US
    Installed input languages: English (Australia) – US
    Time zone: Cen. Australia Standard Time
    System Locale
    Language for non-Unicode programs: Default - English (United States)
    Below is my CS.ini
    SkipLocaleSelection=YES
    UserLocale=en-AU
    SystemLocale=en-US
    UIlanguage=en-AU
    KeyboardLocale=0c09:00000409
    SkipTimeZone=YES
    TimeZoneName=Cen. Australia Standard Time
    when image is deployed the language for non-Unicode is also getting set to en-AU while it should be en-US, other language setting are as per the requirement. what should I do :(
    thanks a lot
    Sanju.
     

    that is a little-known known issue
    Check this post:
    http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
    He details how to modify the ZTIConifgure.xml file.

  • Repeating Console Message 10.6.5 on MacBook Air (Late 2010)

    I just finished setting up the system on a new MacBook Air (13" 1.83ghz). I'm getting the following console message that repeats every 10 seconds. How can I stop it? Thanks.
    12/22/10 6:01:29 PM com.apple.launchd[1] (com.apple.batteryd[487]) Exited with exit code: 1
    12/22/10 6:01:29 PM com.apple.launchd[1] (com.apple.batteryd) Throttling respawn: Will start in 10 seconds
    12/22/10 6:01:39 PM com.apple.launchd[1] (com.apple.batteryd[488]) posix_spawn("/usr/local/libexec/batteryd", ...): No such file or directory
    12/22/10 6:01:39 PM com.apple.launchd[1] (com.apple.batteryd[488]) Exited with exit code: 1
    12/22/10 6:01:39 PM com.apple.launchd[1] (com.apple.batteryd) Throttling respawn: Will start in 10 seconds
    12/22/10 6:01:49 PM com.apple.launchd[1] (com.apple.batteryd[490]) posix_spawn("/usr/local/libexec/batteryd", ...): No such file or directory

    My parents new 13'' MacBook Air (late 2010) would not fall asleep. After resetting the SMC to no avail I checked the console and saw the exact same message. After deleting the plist and rebooting the machine it is falling asleep now.
    I never installed any third-party program relating to the battery and there is a folder called /usr/local however there is no sub-folder libexec nor did a "locate" in Terminal find the daemon batteryd.
    Came across a similar thread on the Japanese Apple discussion forum (clicky). Since I cannot read Japanese I can only guess at what the various posts say. There seems to be talk about it being an Apple software related issue specifically regarding the HAL.
    I checked on my MacBook Pro (mid 2010) and there is no such plist. Will check another 13'' MacBook Air when I get the chance.
    If you delete the file com.apple.batteryd.plist in the folder /System/Library/LaunchDaemons and reboot the machine the message in the console will go away.

  • How do i enter a serial number for an existing program that resides on this computer?

    how do i enter a serial number for an existing adobe acrobat xi stnd program that resides on this computer?

    Hi joanp65961507,
    Could you please specify more on the same.
    Let me know if there is any message window that prompts you to enter the serial number.
    You might not have activated Acrobat on your system after buying it which is why it is asking to provide the serial number.
    Refer: Installing and Activating a Try & Buy product
    In case, you don't know your product serial number, then please refer the following link:
    Find your serial number quickly
    Please let me know more so that I can analyze the issue and help you out with the same.
    Regards,
    Anubha

  • Application hangs for non existing value

    Hi,
    At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
    when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
    why it is hanging in application and why not in DB?
    can any one brief me on this regard? why does application hangs for non exsting value?
    With Regards
    Boo

    Hi,
    At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
    when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
    why it is hanging in application and why not in DB?
    can any one brief me on this regard? why does application hangs for non exsting value?
    With Regards
    Boo

  • CS3 Installer asks for non-existent DVD drive

    I'm running CS3 on Windows XP. I need to reinstall because I somehow lost codecs for Premiere Pro. Whenever I try to reinstall, the CS3 installer puts up an Installer Alert that asks me to insert CS3 Master Collection Disc 1 into drive G:\ to continue installation.
    That sounds pretty simple, but there is no G: drive on my computer. My two DVD drives are D: and E:, and inserting the disc there has no effect. Checking the Windows device manager shows no G: device recognized anywhere on the computer.
    I can only click OK, which returns the same alert, or Cancel to cancel the installation. I cannot, for the life of me, figure out how to get the CS3 installer to ask for installation disks on an existing drive. What's particularly annoying is that the installer is running from a DVD in drive E:, so you'd think it would know to ask for further discs in drive E:. I've tried it as well from drive D:.
    Any ideas for getting the installer to stop asking for discs in a non-existent drive?
    I've toyed with the idea of completely uninstalling CS3, but am afraid that the installer still won't work, in which case I won't be able to get any work done using CS3 at all.
    Thanks for any and all help,
    Mike Boom

    The 404 means you have not followed the Very Important Instructions on the prodesigntools page before clicking the download links.
    The 7 steps are crucial for setting the correct cookies on your hard drive so that the Adobe servers will grant you access to the download files when you click the links.
    So:
    Go back to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the Very Important Instructions (Step 0 to Step 6 = 7 Steps)
    Then click the download links and they will work.

  • IPhoto repeatedly tries to import non-existing photos

    I recently deleted 100 photos from iphoto. Now whenever I open iPhoto a box pops up that says "2 photos have been found in the iPhoto library that have not been imported. Would you like to import them?" Whether I click yes or no, a second box will pop up saying that the photos have been placed in a recovery file. This process happens 2 times every time I open iPhoto. The empty "recovery" files continue to build each time this happens. How do i make iPhoto stop asking me about these 2 non-existent photos, and how do I make it stop creating recovery files?

    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
    Regards
    TD

  • Thunderbird giving notifications for non-existent new messages

    TB has developed some new relatively new behaviour. I will get pop-up notifications of new emails and the inbox will claim the same number of new emails but there are none. I am running TB on Windows 7 in the correct compatibility mode and I took some action a while ago based on some Google searches that, if I remember correctly now, was meant to "repair" the inbox folder. However, the behaviour persists. Suggestions are welcome.

    right click the folder, select properties and then the repair button. A re-index might make mail visible that is not already. Not a solution, but a diagnostic process.
    Some reasons for mail notifications when there is no new mail in the inbox.
    1. IMAP account any new mail in any account can trigger the notification
    2. A filter deleting new mail as spam or for other reasons. It still arrives.
    3. Defective spam filtering tools in an anti virus/internet security suite.
    Although none of those show unread mail in the inbox that is not visible other than as a number of unread mails.

  • Each Airport device asking for non-existant password

    My network consists of 2 AEBS and 2 AEs. There is no network password at the moment.
    I just opened up Airport Utility to check a setting and when I double clicked on my main AEBS it asked for a password. I checked every device. They are all asking for a password which doesn't exist, before allowing me to even see the configurations. This happened before with an AE that I was trying to reset, the only way around it was to hook the AE to my mac with ethernet. I really don't want to have to do that every time I want to make a change to my network. Anyone know what's going on here? The same thing happens if I click on Manual Setup or Continue.

    I live on a dirt road with very few neighbors. I would notice if someone parked on the road
    in front of my house. Plus, why would anyone want to change the settings on my airport?
    Also, the passwords it was asking for were not the passwords I had assigned to those airport devices and saved in my keychain. They were some kind of default factory setting passwords.
    Anyway, none of my airport devices is asking me for a password now in order to see their configuration. And I have changed security over to WPA2.
    Message was edited by: pputnam

  • Repeating console messages

    Does anyone know the root of and the fix for the following messages I am receiving from console?
    11/2/08 7:10:21 AM com.apple.coreservicesd[63] NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
    11/2/08 7:10:28 AM mdworker[11640] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    Any input would be great.
    Thank you,
    Ian

    imcleod wrote:
    My installation was factory installed on a refurbished machine. I used Migration Assistant to bring my data from a PB G4 running 10.4.11.
    OK, it is possible you brought over a bad (funny?) plist with you. If you are still concerned, you can do a quick check using Terminal:
    Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window followed by a return:
    plutil -lint *.plist | grep -v OK
    Any .plist file it doesn't like will be listed: if it just comes straight back to the prompt, like mine does, it can't find any problem.
    If you do find a problem, post and let us know.

  • SQL Challenge - Returning count=0 for non-existing values

    Hello there,
    I have a question about our requirement and an SQL query. I have posted this to some email groups but got no answer yet.
    Here is the test case:
    SQL> conn ...
    Connected.
    -- create the pattern table and populate
    SQL> create table pattern(id number, keydescription varchar2(50));
    Table created.
    SQL> insert into pattern values(1,'hata1');
    1 row created.
    SQL> insert into pattern values(2,'hata2');
    1 row created.
    SQL> insert into pattern values(3,'hata3');
    1 row created.
    SQL> insert into pattern values(4,'hata4');
    1 row created.
    SQL> insert into pattern values(5,'hata5');
    1 row created.
    SQL> select * from pattern;
    ID KEYDESCRIPTION
    1 hata1
    2 hata2
    3 hata3
    4 hata4
    5 hata5
    SQL> commit;
    Commit complete.
    -- create the messagetrack and populate
    SQL> create table messagetrack(pattern_id number, realdate date);
    Table created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 13:00:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 13:05:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(2,to_date('26/08/2007 13:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(3,to_date('26/08/2007 14:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(4,to_date('26/08/2007 15:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> insert into messagetrack values(1,to_date('26/08/2007 15:15:00','dd/mm/yyyy hh24:MI:ss'));
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from messagetrack;
    PATTERN_ID REALDATE
    1 26-AUG-07
    1 26-AUG-07
    2 26-AUG-07
    3 26-AUG-07
    4 26-AUG-07
    1 26-AUG-07
    6 rows selected.
    Now, we have this simple query:
    SQL> select p.KeyDescription as rptBase , to_char( mt.realdate,'dd') as P1 , to_char(mt.realdate,'HH24') as P2, count(*) as countX
    2 from messageTrack mt, Pattern p
    3 Where mt.realDate >= to_date('26/08/2007 13:00:00','dd/MM/yyyy hh24:MI:ss')
    4 and mt.realDate <= to_date('27/08/2007 20:00:00','dd/MM/yyyy hh24:MI:ss')
    5 and mt.pattern_id=p.id
    6 group by p.KeyDescription, to_char(mt.realdate,'dd'), to_char( mt.realdate,'HH24')
    7 order by p.KeyDescription, to_char(mt.realdate,'dd'), to_char(mt.realdate,'HH24');
    RPTBASE P1 P2 COUNTX
    hata1 26 13 2
    hata1 26 15 1
    hata2 26 13 1
    hata3 26 14 1
    hata4 26 15 1
    But the result we need should contain the pattern values(hata1, hata2, hata3 and hata4) for each time interval(hour) although there are might be no records of some patterns for some hours.
    The result for our test case should look like this:
    RPTBASE P1 P2 COUNTX
    hata1 26 13 2
    hata1 26 14 0
    hata1 26 15 0
    hata2 26 13 1
    hata2 26 14 0
    hata2 26 15 0
    hata3 26 13 0
    hata3 26 14 1
    hata3 26 15 0
    hata4 26 13 0
    hata4 26 14 0
    hata4 26 15 1
    Our version is 10.2.0.2
    On my discussions some said model clause may be used, but i don't know model clause much and can't imagine how to use.
    You can download the test case code above to reproduce from:
    http://www.bhatipoglu.com/files/query1.txt
    You can see the output above more clearly(monospace font) on:
    http://www.bhatipoglu.com/files/query1_output.txt
    Additionally, I want to state that, in the resulting table, we don't want all the patterns(hata1, hata2, hata3, hata4 and hata5). We just want the ones that exists on messageTrack table(hata1, hata2, hata3 and hata4) as you see on the result.
    Thanks in advance.

    Here is an attempt with the Model Clause:
    Edit: I should mention that I created a view out of your original query.
    SELECT rptbase
          ,day
          ,hour
          ,countx
    FROM demoV
      MODEL
        DIMENSION BY (rptbase, day, hour)
        MEASURES (countx)
          RULES(countx[
                        FOR rptbase IN (SELECT rptbase
                                        FROM demoV)
                        ,FOR day IN   (SELECT day
                                        FROM demoV)
                        ,FOR hour FROM 13 to 15 INCREMENT 1
                        ] =
                        NVL(countx[CV(rptbase),CV(day),CV(hour)],0)
                order by 1,2,3;Which produces the following
    RPTBASE                                    DAY                 HOUR               COUNTX                
    hata1                                              26                     13                     2                     
    hata1                                              26                     14                     0                     
    hata1                                              26                     15                     1                     
    hata2                                              26                     13                     1                     
    hata2                                              26                     14                     0                     
    hata2                                              26                     15                     0                     
    hata3                                              26                     13                     0                     
    hata3                                              26                     14                     1                     
    hata3                                              26                     15                     0                     
    hata4                                              26                     13                     0                     
    hata4                                              26                     14                     0                     
    hata4                                              26                     15                     1               Note my Hata1 26 15 has a countx of 1 (I believe that this is correct and that your sample result is incorrect, if this is not the case, please explain why it should be 0)
    Message was edited by:
    JS1

  • Hide messages for External Interface Program Error

    Hi,
    I am facing problem in removing the external interface errors encountered during EPC of a Y program. Can you please suggest any solution for hiding the error in the custom Y program using #EC.
    Regards,
    Kajari

    Hello IvoK,
    The 9881 needs to be externally powered. You can do it with a CAN Breakout Box or with a CAN cable.
    Regards
    Mélinda B
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure - Nouveau contenu
    34 sessions partout en Fra...

Maybe you are looking for