Repeating event not allowing to edit single event

I have a repeating event set for every week, but for one of the weeks I wanted to change to calendar and time of the particular event. Normally, I get a box that asks if I would like to save for this event only or for all following events. I have not been getting this box and it is editing all of the events in the series. It was working fine this morning :/ I've restarted my phone already.

I tried getting rid of duplicates in FontBook. I tried deleteing the iCal.plist file and restarting my mac. Nothing works. I can not edit any entry in any way except to drag it to a new place. I also can't open iCal Preferences. I have iCal 4.0.1 - is that the current version?

Similar Messages

TS1702 My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is no Calendars or + at the top of the app.

My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is not a (Calendars or +) at the top of the application. Previous iPhones I have had had this feature. Please advise

Go to Settings>iCloud, turn Calendars to On.

All of a sudden my ical will not allow me to add events through the monthly view mode.

All of a sudden my ical wil not allow me to add events throught the monthly display mode. I ahve to go the the daily or the weekly mode.

Hi John,
Thanks so much for wading in. I did exactly what you suggested - glad you gave me the hint about how to access my library files. There was only one document that seemed to have anything to do with cache, and that was called Calendar Cache. (I've attached a screen capture of all the files incase I should have deleted something else as well.) I deleted Calendar Cache then restarted iCal, but after updating I was still unable to add new events.
Is there anything else you can suggest?
Thanks again,
Susan

IPhoto is not allowing the edited versions to be exported.

Apparently, there is a long-standing issue with iPhoto not keeping the edits once photos are exported. I usually don't test my exports to see if the edited version was exported correctly. I just assume Apple products are working as they should. But I tested today and discovered what so many of you have discovered - iPhoto is not allowing the edited versions to be exported. I can't see that Apple has addressed this. What is going on here? Side Note: I am also frustrated that Apple took iDVD out of their line-up of available preloaded software. Getting more disappointed with Apple all the time.
Has someone figured out how to easily get around this obvious flaw?
Could it have something to do with the preference of importing the photos into the iPhoto Library. Should I uncheck this in the preferences menu? I really only want to use iPhoto for quick renaming of files and simple editing purposes and then export them to my own method of organizing and back-up. I use Photoshop for more extensive editing. Would really like to continue using a simple method, but so far, this simple method is more work than is necessary for Apple's software. Come on guys!!!!!

1 - there is NO " long-standing issue with iPhoto not keeping the edits once photos are exported." If you are doing things correctly it is trivial to export edited versions (or originals if you prefer)
2 - it is strongly recommended that you do not uncheck the preference to copy imported items to the iPhoto library - unchecking this preference makes operation much more difficult and makes upgrading hardware or moving to a new system almost impossible
3 - you are doing something wrong - since you do not tell us what you are doing - or even what version of iPhoto you have - it is impossible to u hfigure out what you are doing wrong
exactly how are you exporting photos? Exactly how are you using PhotoShop for editing?
The proper way to eidt using PS is to set PS as the external editor, edit in PS and save (not save as) to return the edited version correctly to iPhoto? The best way to export is to select the photo(s) in iPhoto and export (file menu ==> export) - the default is you get the current (edited) version
LN

Calendar 7.0 Does Not Allow Day Names in Events

My version of Calendar (7.0, build 1835.1) will not allow the names of days stated in an event on that day of the week. For example, try to enter "Good Friday" on a Friday and you just get an event called "Good". Ash Wednesday becomes just "Ash". If you put Ash Wednesday on Thursday, it works just fine. Try it yourself! My only thought is that somewhere Apple was trying to help us think and remove something redundant, like the name of the day of the week inclusive within an event title. This is pretty silly, given any number of such titles as my very Easter-specific examples above prove...

I just successfully created an event called "Good Saturday" for today (Saturday). It was not a day long event - only an hour long event.
I created a "Good Saturday" day long event for next Saturday and that succeeded.
So I conclude the issue you are seeing must be with the calendar account(s) you are using.
I also run the same build of calendar you have.

All of a sudden my pad will not allow me to add events to my calender

All of a sudden my ipad will not allow me to events to my calender.

Have you tried a Reset of the iPad as described here...
http://support.apple.com/kb/ht1430
Also, have you had a look here Joining and troubleshooting Wi-Fi networks
From Here http://www.apple.com/support/ipad/wifi/

ScatterGraph does not allow manually editing axis range at runtime

I'm using both ScatterGraph and WaveFormGraph controls in a Winforms VS2010 application. I have the axis interaction mode set to EditRange. The WaveFormGraph control allows editing the axis range by clicking on the end labels for the axis and changing them. The ScatterGraph control does not even though the documentation that I have read indicates it should. The axis mode does not seem to be the issue as I have changed between Fixed and AutoScaleLoose (which is not the selection to have while displaying changing data if you want your manually-entered range to be maintained). I tried a new project with a ScatterGraph control with default settings and verified that it does not allow you to edit the axis range. Is there a way to change settings to allow you to manually edit a ScatterGraph range in this way at runtime?
Thank you!

Hi Lybro,
Have you enabled the "EditRange" InteractionMode of the scatter graph object? There are two places that the interaction mode is set, one for the axis and one for the scatter graph, both need to be enabled for the editing to work. I just tested this with Measurement Studio 2013 and it is working. Let me know if this helps.
Regards,
Kevin

Standard not allow to edit value of activity type (Time event confirm CO19)

All expert,
I have requirement to customize program same as CO19 for confirmation time event by using BAPI_PRODORDCONF_CREATE_TE and now pogram can post record type B10 for start and B40 for finish processing. By the way I just have a little requirement for B40 to input calculation value in program at field ActyToConf1 to ActyToConf4 and Unit/activity1 to Unit/activity4 as parameters below. but program ignore all value that I input, only get result the value from standard
Anyone advice me how I can do that?
gt_timeevents-orderid = caufv-aufnr.
gt_timeevents-operation = '0010'.
gt_timeevents-recordtype = 'B40'. "Finish
gt_timeevents-fin_conf = 'X'.
gt_timeevents-logdate = wa_screen300-fisbd.
gt_timeevents-logtime = wa_screen300-fisbz.
gt_timeevents-yield = wa_screen300-yield.
gt_timeevents-conf_acti_unit1 = 'MIN'.
gt_timeevents-conf_activity1 = 10.
gt_timeevents-target_acti1 = 'X'.
gt_timeevents-conf_acti_unit2 = 'MIN'.
gt_timeevents-conf_activity2 = 30.
gt_timeevents-target_acti2 = 'X'.
gt_timeevents-conf_acti_unit3 = 'UNI'.
gt_timeevents-conf_activity3 = 60.
gt_timeevents-target_acti3 = 'X'.
gt_timeevents-conf_acti_unit4 = 'UNI'.
gt_timeevents-conf_activity4 = 30.
gt_timeevents-target_acti4 = 'X'.
APPEND gt_timeevents. CLEAR gt_timeevents.
Edited by: Konnapa on May 13, 2009 7:14 AM

Rajesh,
Put a breakpoint and try to debug the report step by step.
You will findout the reason very easily.
Whenever you have a select and are trying to append into an internal table, keep checking your internal table if it is been populated with the correct records.
This way, you will findout the cause and can correct is accordingly.
Thanks,
Suresh Ganti

4s calendar not allowing me to add events

Hi,
when i open Calendar there is no box with a plus sign in it and i cannot add anything, open anything and nothing synchs to or from there. Is my Calendar faulty?
Thanks

I turned on icloud and now it is unlocked!!

Delegated Object's event not appearing in the "start event" tab

Hi,
I have created a object type say Y00Mara( copy of BUS1001) ....then created a subtype from it ...called Ymara00.
then I created a deleegation ...if I test the supertype i can now see the new objects/attributes etc...
I also added one event "old_material_changed" in the subtype and changed the status on both the subtype and delegted obj to "implemented".
when i am trying to use this delegated obj in the "start event" tab of a WF ...the new event "old_material_changed" is not appearing...
what maay be thhe reason

HI,
Please maintain the delegation with the subtype ( Y00Mara) and supertype ( BUS1001 ) by using transaction SWE_SET_DELEGATION. Now run the above transaction.
Click on new entres.
Enter the follwoing values...
Object type : BUS1001
Person responsible : your sap user id
Delegation type : Y00Mara
Save it.
Now whenever you use BUS1001, all the custom mentod, events will be available there.
Thanks and regards,
SNJY

IMovie iPhoto video events not in sync with iPhoto Events

iMovie iPhoto events is not the same as my iPhoto events. I have recently amended a few events in iPhoto and to which I am satisfied with. However, iMovie is still showing the old events. For example (EVENT Holiday would contain two holidays originally - so I split this in iPhoto and that is displaying well. iMovie is still showing the old event with both holidays).
I've tried rebuilding iPhoto - all four options - and deleted the iMovie plist (think that is what you call it) but to no good conclusion. Please help?

The basic problem you are facing is the use of the internal camera. It is designed for simple web cam usage rather than movie making. If you are making a Face Time call, the variable frame rate helps you, because when there is not a lot of movement, it will slow down the frames and give you better performance at a lower bandwidth. If the audio is a little off you do not care.
Long term, you can solve this by using a camcorder that shoots at a constant framerate.
For your immediate problem, I think that the suggestion to use MPEG Streamclip was a good one.
Basically, you would be dragging in this file with the variable frame rate and using MPEG Streamclip to save it out as a file with a constant framerate. You should now have a file at 30 fps with audio to match, within reason.
Try dragging your clip into MPEG Streamclip. Click the PLAY button so you can see that it plays. Then FILE/EXPORT TO QUICKTIME. For Compression, choose Apple Intermediate Codec. Leave the sound setting as Uncompressed. In the Frame Rate box, type 30. Click the check box for Frame Blending. Deselect the box that says Interlaced Scaling.
Finally, click the MAKE MOVIE button, and give at a name. Save it to a location where you can find it. You can then import this into iMovie if you want, but using FILE/IMPORT MOVIE in iMovie.

Modify not allows to Edit file in Sequencer

Hi,
I am trying to edit a file in Sequencer (5.0 sp2) that can be opened with Notepad after local installation.
When right click on file there are : Add Delete Modify.
When click Modify it provides the box for a path. I guess Modify means Replace...
Do I am missing something?
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Falco,
thanks for explanation on editing in sequencer...
Can I change/replace the file in c:\Program Files\Program_NAME after installation is done in sequencer and before clicking
I am finished installing.
I want to be sure that it will take effect in the package. I think Yes.
I prefer to have the file replaced before Running the app for first feature block...
And it will be more appropriate than replacing the file in sequencer before saving.
Please confirm that I can replace file/files before clicking I am finished installing.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Report Editing Opens and Closes by itself not allowing to edit.

Hello Everyone,
I notice an issue with my SCCM 2012 R2 when trying to edit a report. When I right click on a report and select EDIT. Two windows pops up and closes in a blink of an eye. Bellow is a screenshot of these two windows that comes up.
Continuing tests I notice that if IEXPLORE is open before I click on EDIT report the report DOES open on the Report Builder.
It gotta have something to do with IE security settings that I can't find it.
Cheers everyone

Hi,
Have you tried grundlichkeit's suggestion that editing the report from the browser? Can you open the report in Report Builder?
Monitoring -> Reporting -> Click the Report Manager Links
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I no longer am able to edit an event in ical on the iphone. When I click on the event I can read it but there is not edit button on the screen?

I am not able to edit an event on Ical on my Iphone 4. I can view the event but there is no edit button available on the screen.

Hi ,
According to your description, my understanding is that you could not edit documents with Office client application in SharePoint 2010.
Let’s do a troubleshooting about this issue:
1. Make sure that you have installed Office application on your machine.
2. Which explorer did you use for your SharePoint. Please test it with IE 10 32-bit, compare the result.
3. Please try to reset IE, compare the result.
4. Add your SharePoint site into Trusted site on your IE options.
5. Make sure all add-ons related to SharePoint are enable, special for SharePoint OpenDocument Class and SharePointOpenXMLDocuments.
6. Since you used OWA for your SharePoint site, please try to disable OWA, then open documents with client application, compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event?? It asks "for all events or only this event" if i change the time. But it changes ALL events when i try and switch calendars. Any help??

I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar. I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts". But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days. I want to change that in my calendar. When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event. no problem....just this single event. but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event. can anyone help with this??? am i doing something wrong? is there a way to do this or not with the new iCal program??? i used to do this and never had any problems. Thank you!

You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN

Repeating event not allowing to edit single event

Similar Messages

Maybe you are looking for