Repeating   group variables  on the header of a  second page.

In BI Publisher Desktop 11.1.1.6
I have something similar to a customer and a list of invoices. On each page I need the customer info at the top and also some customer info printed at the bottom of the page. The customer is a group and I do a page break on it and list all of the detail invoices. This works fine except for when the list of invoices goes beyond a page.
I cannot find a way to have the customer info repeated on the top and bottom of the second or consecutive page(s). It would be great if the header could pick up the customer name but it does not appear to be that you can use variables in an MS-Word header. Is this possible and if so, can anyone point me to any examples of how to do this?
Thanks!

Thanks very much but I am missing something or did not ask my question correctly.
If I add <?Customer_Name?> into the heading, it prints the name but it prints the first customer name on every page (the same name). It does not pick up the second customer record name when it is on the body of the second customer. So, page one has Customer 1 in the heading and some detail.. Page 2 has Customer 1 in the heading but the detail is for Customer2 . How would I get the header variables to pick up the customer record name that the for loop changes to? Also not sure what you mean by putting the tables in the header. The repeat table is in the body. Are you saying move that into the header?
I do appreciate your help...as I know I am close and think I am missing something simple.

Similar Messages

  • Removing the header and footer in Pages

    I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

    I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
    SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
    Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
    Rusty

  • How to change the font size of the header for a login page

    I am using theme 15. I want the header of my login page have a larger font size. Can anybody tell me how to do that?
    In HTML Header I put text like
    <a target="_blank" href="http://www.myweb.com"><img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt=http://www.myweb.com" title="Application" ></a> <center><b><font size="4">Web Management System</font></b></center>
    However, the font doesn't do anything.
    Any help is appreciated!!
    Edited by: user12048533 on Jun 14, 2010 8:19 AM

    In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
    However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
    How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like &lt;center&gt; and &lt;font&gt;. Assuming this text is the primary heading on the page, use &lt;h1&gt;:
    <img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
    <h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1>

  • How can I edit the head section of a page made from a template?

    Humm,  I made a page from a template but now I cannot modify the <head> section...  I will need to add some HTML to the head section that will be different for at least this one specific page...

    Be aware that you CANNOT use the DW UI to add an editable region to the head. A properly made DW template always contains two editable regions in the head of the template: "doctitle" and "head".  If you do not have those, then as Nancy says, you will need to add them.
    To add an editable region to the head of your template page, just copy this and paste it in to some legal place in the head of the page (like immediately above </head>).
    <!--TemplateBeginEditable name="whatever"-->
    <!--TemplateEndEditable-->
    Change the name as needed.

  • The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How to make the header display in Firefox?

    The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How do make the header display?

    (Images or animations do not show) worked well.

  • How to use two group tags in the header?

    I am using BI Publishing,RTF Template,I found when I put two group tags before <?start:body?> ,the BI Publishing only keep the 2nd group tag right before <?start:body?> as header, it moved the 1st group tag to the body section.
    Is this a bug? Can anyone give me some ideas how to make BI Publish treat all the group tags before <?start:body?> as the header/sub header?
    thanks for your help

    Hi dirk,
    Thanks it worked well.
    I have one question for you in the tabular form.
    i have totally 10 columns in my tabular form, in that 9 column is of database column and only one column is non-database column, while updating the row in the tabular form it is throwing the below error like
    Current version of data in database has changed since user initiated update process. current row version identifier = "A0FD649E5A28DF9244990A3B9368298A" application row version identifier = "44CE02A233595BCA6F7D4A140BD4DF30" (Row 1)I thought the above error is due to the existence of non-database column in my tabular form. Is there any way to solve this issue. I need to have a non-database column in my tabular form but the presence of that column is not allowing to perform update in that tabular form.
    how to get rid of this issue dirk.
    Any ideas??
    Brgds,
    Mini

  • APEX 3.0 PDF FOP OC4J REPORT: how to put a variable in the header or footer

    hello.
    I want to put a variable ( like :P15_MY_PARAMETER) in the header OR footer of a standard PDF report , but does'nt work.
    I tried HTML formating with ' &P15_MY_PARAMETER. ' like described in the thread Include a display value in HTML footer ( Include a display value in HTML footer )
    but PDF generated is not readeable by Adobe, , I suppose html codin was not translated.
    Is it a possibility to put a variable in a PDF header / footer.?
    Thanks
    Fernand Ducarme

    Keith,
    If you want to use the value of page items in your PDF page header or footer, they need to be written to session state first. In order to do this, your form needs to be submitted. So a button that redirects to a URL or a report print links (that also redirects), won't do that. But submitting your form doesn't necessarily mean you'll have to leave or refresh your current page. All you would have to do is create a branch that points to your PDF document, and make that the target of your submit action. This way, your page doesn't refresh, and you'll get the open/save PDF dialog you would expect.
    So to give you an example, if you have a regular reports region, enable PDF printing, but do not specify a link label. Then create your own print button, which needs to be a submit button (not redirect to URL). And then create a branch to the current page that is executed when pressing your print button. That branch also needs this request:
    FLOW_XMLP_OUTPUT_R[Report Region ID]
    so if your report region ID is 90104803966374878, then the request would be:
    FLOW_XMLP_OUTPUT_R90104803966374878
    The same technique works for report queries, only in that case you would point to page 0 and use this request:
    PRINT_REPORT=[your report query name]
    So if your report query name is "myreport", this would be
    PRINT_REPORT=myreport
    Hope this helps,
    Regards,
    Marc

  • Display only one variable in the header and not column in WAD

    Hi All,
    my requirement is to be able to display only one variable in the report output header and hide the others. I am able to display all by using the INFO FIELD ITEM and saying variable display ON - but the requirement is very specific for only one variable display.
    how can i achieve this ?
    Thanks,
    Shweta

    Hi,
    You can insert a text item and Turn off the others or Hide these from Filter pane I have done that and then use that query for your WAD.
    Steps:
    1. Uncheck all the variables from your Design item in Analyzer.
    2. Insert a New Text Item and check the Variable you want to display.
    3. Go back and run the Query.
    Even you can change the position in the Query and Save as a workbook.Let me know ,if this works.
    ~AK

  • Repeating group won't consume all space on continuation pages

    I am using Oracle Reports 6i. I have a report that I want everything to print on the first page. Then I want the repeating group in the middle of the first page (~5 lines) to finish printing on all subsequent pages. Right now the repeating group finishes printing on continuation pages, but it won't use the top half of the page (above where the repeating group header appears on the first page). It will use the bottom half of the page. Any ideas on how to make it use the entire page on the continuation pages?

    I added a frame around the fields that were causing the extra white space and set vertical elasticity to variable.
    that took care of the extra white space on the subsequent pages but the fields in the frame now overlap with the fields below it.

  • How can I delete an image that is being repeated as a heading on a second page of a document?

    I have a pages document that has a formal heading with a logo, and on the second page, it automatically repeated, so I was hoping that someone had some insight on how to stop the repeated logo, because I only want it on the first page. When I try to delete it from the second page, it deletes it from the first page as well. Please and thank you for your help!

    About… is always under the thing it is about.
    So for Pages it is under the Pages menu.
    In Pages 5.1 you can not insert images into the Header, so I assume you have put it in the Section Master.
    click at the end of the first page text > Menu > Insert > Section Break
    Then delete the logo in the subsequent section/s. Section Master objects repeat for every page of the section they are in. As the name suggests.
    Peter

  • How do I remove an extra editable region in the head of a specific page?

    I have a single-template website.  My template has the standard two editable regions in the head ("title" and "head").  Somehow, one of my pages ended up with three editable regions in the head - two named "head" as well as title.  My template won't update this page because the editable regions don't match.  How do I remove this extra editable region from the head of the page?  I can't modify it on the page itself, of course, and I can't remove it by modifying the template because it's not part of the template.
    Thanks in advance!

    Your child page would not contain any editable regions if it wasn't attached to a Template.  Perhaps you nested templates which is the wrong thing to do.
    Go to Modify > Templates > Detach from Template.
    Nancy O.

  • How to get the text field in the header for only first page of the report

    Hi,
    I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
    Thanks in Advance

    Invalid path? What are you doing? Writing the report output to an invalid directory?
    Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

  • How do I put the page number in my header so the header changes with every page

    I need to write a paper for my english class and I need the header to contain the page number so it changes with each consecutive page.
    I need to know ASAP! Thank you!

    Click in your header > Menu > Insert > Page Number
    Peter

  • Variable field in Header for every new page

    Hi Friends.
    I am printing a new page on every new material no encountered . At the same time the HEADER has a field called Container name which is different for each  material so this header field needs to be update each time when a new page is called to print .
    How to handle this ? Please advise .
    In my z calling program I am using this logic .
    If  old_matnr  <> new_matnr
    PERFORM PRINT USING 'MAIN' 'NEW_PAGE'.
    endif.
    Thanks!!
    Hari

    If you have created a seperate window for header then you cant pass a changing field . Instead keep that header window in the main window that will serve your purpose.
    you need to put the condition
    if &page& eq '1'.
    header code.
    endif.
    Reward points if useful.
    Regards,
    Nageswar

  • Report in background, how to avoid the header at every new page?

    Dear all,
        I have a big report which gives time out, so I run it in background mode, the problem arises when I go to SP01 and download the output, it doesnt appear as a continuous list but as a bunch of pages with a header in each one, so it is a pain to work with it in Excel.
       Any idea about downloadig it with out the header of the pages?
    Thanks in advance,
    Fede

    Write an utility for downloading from spool using below said fm and give the first_line parameter value as your first line after header
          call function 'RSPO_RETURN_ABAP_SPOOLJOB'
            exporting
              rqident              = wa_spool
              first_line           = 2   " Specify your  first line from header
            tables
              buffer               = i_spldata
            exceptions
              no_such_job          = 1
              not_abap_list        = 2
              job_contains_no_data = 3
              selection_empty      = 4
              no_permission        = 5
              can_not_access       = 6
              read_error           = 7
              others               = 8.
    a®

Maybe you are looking for

  • I can't open pages because it tells me that I need a new program. I have 08 and 09 installed on my new Mac bookair but 08 seems to be the default.

    I have a new mac book air and it shows that it has pages 08 and the newer version pages 09 installed, but it only opens in pages 08. Now pages tells me I need to update the progammbefore I can open pages again. Even documents that I have created only

  • Can i transfer money from my austrian account to the danish account?

    HI! Can i transfer money from my austrian account to a new danish account - it says, that I still have money on the austrian account and therefore I can not switch to the danish account (country)

  • Help with buttons and graphics

    ok all I get on this is about a hundred runtime errors starting with NullPointerException. public class Ers2View extends FrameView{ Image image; static Paint paint; public Ers2View(SingleFrameApplication app) { super(app); initComponents(); slapButto

  • White line across screen.

    Here's a picture of the problem http://i139.photobucket.com/albums/q319/Rob1302_album/ipodfk.jpg?t=1231786566 You can see the line across the top which stays on every screen. I haven't used my ipod in about a week and this wasn't there before. I turn

  • Display too big for screen

    I caught my 3 year old playing with my macbook pro this morning.  He changed something that I cannot fix.  I cannot see the entire screen, even if I have the resolution at the highest setting.  How can I change this back to I can see the entire scree