Repeating patterns that are staggered and how to set the alignment perfectly.

Can anyone help me with a repeating pattern that is staggered and must be aligned perfectly while staggered. Is there a way to do this?
My art board is 19.25x11.50 I have a repeating logo and name underneath (hard to see) I am setting this up for a print design to go onto tissue paper for insert into a shoe box. Any help is greatly appreciated?
Thanks,
B

For the swatch, I positioned five logos exactly the way I wanted.
I drew horizontal and vertical straight lines and centered them over the outer four logos (the eventual outside edges of the final swatch).
I then used Object > Path > Divide Objects Below for each of the lines in turn to cut the outer logos (the lines must be in exactly the same place for each logo).
After ungrouping the cut logos (may or may not be necessary), I deleted the parts I didn't need and dragged the result (the swatch you see) to the Swatch Pallet.
--OB
Here's another picture:

Similar Messages

Can anyone help me with a repeating pattern that is staggered?

Can anyone help me with a repeating pattern that is staggered and must be aligned perfectly while staggered. Is there a way to do this? I keep staggering it by eyeball and need it to be accurate and each row is offset.
My art board is 19.25x11.50 I have a repeating logo and name underneath (hard to see) I am setting this up for a print design to go onto tissue paper for insert into a shoe box. Any help is greatly appreciated?
Thanks,

Option drag your object horizontally to make a copy or use Move and copy if you need a precise increment. The hit Cmd+D a few times to make duplicates with the same spacing.
Hit Enter again and make a note of the increment on a piece of paper. Cancel.
Select everything and use the same increment, now in a vertical direction, to make 2 further copies.
Take the middle row and move it horizontally by half of the increment. This means that the circles in the middle row are positioned horizontally half way between those in the other two rows.
Draw your defining rectangle so that its corners are on the centres of those 4 circles. (This gives you its right size but you may possibly need to move it a bit.) Send it to the back of your stack.
Drag those 8 circles and the rectangle to your Swatches panel.
(If you’re on Windows read Ctrl instead of Cmd and Alt instead of Option.)

How to enable root on mac on 10.9.2 and how to set the password for the same ?

how to enable root on mac on 10.9.2 and how to set the password for the same ?

http://support.apple.com/kb/ht1528
Follow the steps for Lion.
But, why are you doing this? I've never found the need to do that.

How to start weblogic in debug mode ? and how to set the eclipse in the deb

how to start weblogic in debug mode ? and how to set the eclipse in the debug

Put this in JAVA_OPTIONS :
Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=3999,suspend=y,server=y
After restarted weblogic, in eclipse set your breakpoint , open debug perspective then choose Remote Java Appliction and configure Connection Properties (host=localhost and port=3999)

Updated my IPhone 4S to ISO 7.0.3 now won't accept account details that are correct and have always remained the same

iPhone won't authorise card account details.

What card? Credit card for billing purposes?
If so, will it accept in iTunes on the computer?
Any errors?

How to set the default item showed in a h:selectonemenu

I need to show the second, or the third, and on so.
i tried some ways to set the default item showed in it, but failed.
i had tried the attribute value, but it stiil showed the first item.
Can u help me?
in the JSP
<h:selectOneMenu id = "companyName" rendered="true" binding="#{j03CMSyainAddBean.selectCompany}" style="width:150">
<f:selectItems value="#{j03CMSyainAddBean.companyList2}"/>
</h:selectOneMenu>in the back BEAN
private UISelectOne selectCompany;
private ArrayList companyList2;In the ArrayList companyList2, there are several selectItems.
Thanks
George

Sanjeev K Sharma wrote:
and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
In /etc/default/grub you can use the name of your entry you wish to use as default
GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
You can tell grub to stop using submenus by doing:
GRUB_DISABLE_SUBMENU=y
Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
menuentry "Other Linux" {
linux <KERNEL IMAGE HERE>
initrd <INITRD IMAGE HERE>
EDIT: /etc/grub/default -> /etc/default/grub
Last edited by Slabity (2015-04-07 11:16:22)

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

How to set the default boot kernel in /etc/default/grub or /etc/grub.d

and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
Last edited by Sanjeev K Sharma (2015-04-06 12:59:22)

Sanjeev K Sharma wrote:
and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
In /etc/default/grub you can use the name of your entry you wish to use as default
GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
You can tell grub to stop using submenus by doing:
GRUB_DISABLE_SUBMENU=y
Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
menuentry "Other Linux" {
linux <KERNEL IMAGE HERE>
initrd <INITRD IMAGE HERE>
EDIT: /etc/grub/default -> /etc/default/grub
Last edited by Slabity (2015-04-07 11:16:22)

How to set the coupling (AC or DC) of a PXI spectrum analyzer?

I have a client that asked me the following question.
At this time (today is a holiday in Canada), I do not have additional information as for which PXI module is used.
I suspect that it is one of the PXI-5660 series (5665 maybe?).
Does anyone have experience with this module? And how to set the AC / DC coupling?
Thanks

Found it.
For LabVIEW versions 8.2 and older, it is through a standard dll call.
Newer versions have the option available through a property node.

How to set the user who can access to repository

Hi,
I know we can create user and group in the tools->security.And if this users is belong to Administrators Group, it can access to RPD and do some modify..
Can we create group or user who can access RPD in some situation(like mentioned in HELP, A can access to repository on Mondays and Wednesdays, B can access to repository on Saturdays and Sundays) and how to set the privilege..
Thanks
anne

Hi Anne,
The example specified in Help is about restricting query execution on weekdays/weekends for a particular webgroup. Inorder to configure such access ,
Double click on the web group name -> Query Limits tab ->Click on Restrict button provided against the physical connection pool ->Select Allow/Disallow by selecting a particular time period.
Rgds,
Dpka

How to set column alignment in JTable

I make a table with JTable(Vector a, Vector b).
I don't know how to set the alignment to right while the column type is Integer or Long.
Do i have to use JTable(Object[][] a, Object[] b) ?

Well , you can configure the alignment when you are creating the column, like
for (int i=0; i<7; i++){
//Size of cell
int colunaTam = 50;
//Define Allingment
int cellAlinhamento = 4; //Right Aligment
//Column
javax.swing.table.TableColumn coluna;
BusinessObjects.CellColorRenderer renderer = new BusinessObjects.CellColorRenderer();
//Define alingment in cell render
renderer.setHorizontalAlignment(cellAlinhamento);
coluna = new javax.swing.table.TableColumn(i, colunaTam, renderer, null);
ivjJTableDespachos.addColumn(coluna);
Hope i help you...
Ice

Could somebody teach me how to set the lastest iTunes so that it repeats just one of the numbers installed from the CD? I've alreadly tried it by clicking "control" and the bottom, but it doesn't work. Thank you.

Could somebody teach me how to set the latest iTunes so that it repeats just one of the numbers installed from the CD?
I've already given it a try by clicking "control" and the bottom item which means one item in Japanese, but it doesn't work.
Thank you.

You can access the repeat options if you right-click on the shuffle icon or if menus are enabled you can use
Controls > Repeat > Off | All | One.
Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
The bottom one should do it.
tt2

In my iTunes on the iPad I've got 95 items that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab

In my iTunes on the iPad I've got 95 things that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

On images that are long and narrow horizontally, iPhoto truncates them and automaticall crops off part of each end of the image. How can I make it stop?

On images that are long and narrow horizontally, iPhoto truncates them and automatically crops off part of each end of the image. the thumbnail has a jagged, serrated edge at both ends. How can I make it stop?

Then I do not get your problem - you can import the photo - you can find the photo and you can edit and save the photo - what more do you want?
By defination thumbnails are small images to help you find the large image - the large image is fine and you can find it fine - and you know it is only showing part of the image because of the "jagged ends"
If you think think that iPhoto should display long thumbnails suggest to Apple - iPhoto menu ==> provide iPhoto Feedback
as to your digital photoframe - contact them - in general gital photos frames display one and only one aspect ratio and any photo that is not in that aspect ratio will be modified to display - either cropped to the proper size for the frame or have 'White" space added to fill the frame - that function is totally controled by the Digital Photo frame and any otptions you have will be in the manual or on the support web site for the frame - to put it in old film terms - you can not put an 8x10 print in a 5x7 frame unless you cut the photo down (or a 8x15 photo in an 8x10 frame either)
LN

I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

The one iin the Photos ➙ Adjust Date and Time menu option:
checkbox below:

Repeating patterns that are staggered and how to set the alignment perfectly.

Similar Messages

Maybe you are looking for