Repeating table header text is bold and won't go

I have an InfoPath 2007 form that I have published to a SharePoint 2010 site with Forms Services.
When I open the form in the browser, the column titles in each repeating table appear in bold text. No matter what I do, I cannot make this go away. I have tried the obvious things, such as pressing the CTRL+B or CTRL+SPACE keys. I can apply or
remove underline or italics but not the bold.
We are still in changeover period so I can publish this to a MOSS site (no Forms Services) and the table headers are not bold when they open in the InfoPath client.
Does anyone have any ideas?
Thanks,

Hi AdeleR,
Thanks for your post.
As what you have said, I think it’s may be a compatibility problem between InfoPath 2007 and SharePoint 2010.
In order to clarify the reason, I suggest you to do some things as follows:
1.
Compare the source code of the InfoPath page between SharePoint 2007 and SharePoint 2010 using IE developer tool.
a.
Publish the InfoPath form to SharePoint 2007 and SharePoint 2010;
b.
View the source code using IE developer tool;
c.
Compare them.
2.
Are you using IE to open the InfoPath form? Try to browse it using Firefox and give the results.
3.
Re-create a new InfoPath Form and publish again and share the result.
In addition, there are some new features in InfoPath 2010, have you considered about upgrading to InfoPath 2010.
http://blogs.msdn.com/b/infopath/archive/2009/07/15/what-s-new-in-infopath-2010.aspx
I have tried a couple of these points and here are the results:
Compare the source code - I haven't done this because the 2010 site is using Forms Services and the MOSS one isn't (i.e. only one form opens in the browser and the other opens in the InfoPath client).
I'm opening the browser-based form in IE8 and I have also tried opening it in Firefox 3.6.3. Both programs show the repeating table headers with bold text.
I customised the sample Travel Request form and added a repeating table to it. When I published it to both the SP2010 and MOSS sites, the 2010 form that opened in the browser had bold headings; the MOSS/InfoPath client form didn't.
I also created a blank form, added a table with title, a section and a repeating table. The only formatting I changed was to unbold the repeating table's column headers. Once I published the form, I got the same result as above.
The form doesn't have the bold text when you preview it in InfoPath. It somehow gets it when you publish it to the SP2010 site. I'm trying to get InfoPath 2010 (for its cascading drop-down lists) so will see if that makes any difference.

Similar Messages

How can i input some text in bold and other in normal font in h:messages

Hi
I have a message which comes from properties file.I need half of the text in bold and the other half in normal font.

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test extends JFrame {
 public Test() {
 setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 Container content = getContentPane();
 JEditorPane jep = new JEditorPane("text/html",
 "Joe: R u There? "+
 "Mary: Keep ur shorts on...");
 content.add(new JScrollPane(jep), BorderLayout.CENTER);
 setSize(200,200);
 show();
 public static void main(String[] args) { new Test(); }
}

How to repeat table header on each page of PDF using Coldfusion

Hi all,
Can anybody help me in resolving this issue. The details are mentioned below.
I am generating PDF using <cfdocument> tag of Cold Fusion.
I have a header and footer to be displayed on each page. I am rendering data in a table.
If rows in the table exceed a page , and continue on the next page , I want the table headers to be repeated on each of the page.
Example :
Currently this is happening:
Page Header
Sr No
Name
Occupation
1
A
A
2
B
B
3
C
C
Page Footer : Page No 1
Page Header
4
A
A
5
B
B
6
C
C
Page Footer : Page No 2
What I want is :
Page Header
Sr No
Name
Occupation
1
A
A
2
B
B
3
C
C
Page Footer : Page No 1
Page header
Sr No
Name
Occupation
4
A
A
5
B
B
6
C
C
Page Footer : Page No 2

Hi Dan ,
Thanks for your inputs.
This way wont work beacause , am displaying other text and table both, and the table will be diplayed based on some conditions. If the conditions are true , table will be diplayed , else not.
I missed to illustrate text in the example. The scenario is something like this :
Page Header
Text .........
Table [Displayed conditionaly]
Page Footer
Please suggest me some way to do this.

Repeat table header after every 20 rows?

Aloha gang,
I have a spry table that loads an .xml file - the resulting
table extends well 'below the fold' of the page
is there a way to repeat the table header <th> every 20
rows or so?
bill - hawaii

Hi Sergio,
Thanks for the follow-up. I was thinking (after I made the original post) that I might be able to use a (pl/sql?) region and generate the report manually.
Thanks,
Mark

Bold text appears bold and italic

Hi Folks,
Can anyone please explain why this happens?
In FW when I click the bold text button, the text appears bold but italic aswell.
Thanks in advance

That's unusual. Which version of Fireworks and what operating system are you using?
If you click on the Faux Italic button, is the italic styling removed? (It should be. If not, click twice.) You might want to try quitting and restarting the application—or shutting down and restarting your computer—and see if this takes care of the problem.
FYI: It's generally a better choice to add bolding via the Font Style dropdown menu, if that style is available within the currently selected font family.

Invoice List Header text disabled (VF22) and note 357732 missing

1. Can any body please let me know the Invoice List text Determination? Presently, My Invoice list screen is showing the Header text tab is disable, if possible please let me know how to do enable so that I can enter into the Text.
2. I checked SAP Note # 943390. But this note has link to note 357732 which does not exist.
Please let me know if any work around.
Thanks in advance.

Hi Laxmipathi sir,
as you said i went in the bussiness area account assignment and checked it and foound that the Sales area, distributin channel and division are assiogned to rule called 003 -Buss Area Det.from sales org/dist.channel item div.
but there are other two.which were not assigned.
001-buss area det.from plant/dividion(T134G)
002-buss area det.from Sales area (TVTA).
so do you think this is the reason it is not picking it up in the invoice list,
i have discussed with one of the SD person here he said even though you don't assign them it shoudn't bother because the buss area is getting picked in invoice
so could you please tell me what should i ask that person or what i have to tell them about this.
thanks
Jay

Dialog Header Text in bold

Hi
I am using the JavaFX dialogs. I have made a dialog as follows:
     Alert d = new Alert(AlertType.CONFIRMATION);
     d.setTitle(Resources.R(Resources.DELETE_DATA_SOURCE));
     d.setHeaderText(...);
I want to make part of the header text bold -- I want a message like "Really delete X" where X is in bold.
Is there any way to do this with a dialog (other than rolling my own?).
thanks
graham

Hi Srini ,
IF you are using the BAPI_PO_CREATE , we are not having the parameter to pass Header Text.
If you want to get Header Text directly then Use BAPI_PO_CREATE1 wiht a parameter POTEXTHEADER (I am not sure it is there in 4.7).
If BAPI_PO_CREATE1 does not exist in 4.7 then use create_text function module to update the the Header text
Hope it helps
Rgds
Sree M
Edited by: Sree Merugu on Jun 13, 2008 5:10 PM

Decimal for a weight field and form calc on a table - header text

Hi Guys,
Need your help on 4 issues I am facing.
1) I am using a Quantity field and till interface the value is 100.000 but in adobeform print its showing 100. How to get decimals printed.
2) in item details there is a another quantity field and in old script its printed as &VBPLP-VEMNG&(7.0) but the field length is 12 and 3 decimals. If I am directly making limit leading digits to 7 then in output the values is printed as 0.
3) In item details printing there is a last field weight which is also decimal field. user wants to print this field value text(Weight) only when a text field value has "X". I got it perfectly getting printed if value is "X" and is not getting printed when its space. but the issue is the text weight is not getting printed only at first page and for subsequent pages the weight is getting printed. In what event I have to write the code for this scenario and currently I had written code in initialize.
Item Layout :
If a value of interface field is "X" the output should be
ID | Material no | PO no | SO no | Qty | unit | Weight |
If the value of interface field is " " the output should be
ID | Material no | PO no | SO no | Qty | unit |
4) After completion of item details there is a requirement to print 2 standard texts. If 1st standard text has no value then it should print space and the next standard text text and value should move up and display. currently i had kept text1,std text value1,text2,std text value2 in flowed subform only.
Awaiting for corrections......

Hi Guys,
The issue got solved. I am sharing the solution so that it may be useful for others.
1) solved by using pattern - num{$z,zzz9.999}
2) not necessary
3) In Pagination tab of header - you need to check the check box - keep previous , keep next.
4) have to make the text box to fit a single line and check box multiple lines and keep each standard text in a flowed sub form. Now if 1 st standard text is blank then second standard text will come up.
Thanks
Abilash

Read header text from vf01 and print in script main window

Hi Gurus,
           I need to read text from vf01 header note 1, there user type max 10 lines i want to read that 10 lines and print in sap script main window after line item printed. i used read text but one line only fetched. i declare variable like data : NEXRSP LIKE TLINE-TDLINE and read_text function module. pls provide solution for this.
Regards
G.Vendhan

HI GURUS,
Thank u for reply i declare like
    ID = '0002'.
    PERFORM READTEXT USING EN NAME OBJECT ID TEXT_OUTPUT.
    NEXRSP = TEXT_OUTPUT . CLEAR TEXT_OUTPUT.
FORM READTEXT USING    P_EN
                        P_NAME
                        P_OBJECT
                        P_ID
                        P_TEXT_OUTPUT.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      CLIENT                  = SY-MANDT
      ID                      = P_ID
      LANGUAGE                = P_EN
      NAME                    = P_NAME
      OBJECT                  = P_OBJECT
    TABLES
      LINES                   = LINES
    EXCEPTIONS
      ID                      = 1
      LANGUAGE                = 2
      NAME                    = 3
      NOT_FOUND               = 4
      OBJECT                  = 5
      REFERENCE_CHECK         = 6
      WRONG_ACCESS_TO_ARCHIVE = 7
      OTHERS                  = 8.
   LOOP AT LINES.
    P_TEXT_OUTPUT = LINES-TDLINE.
    EXIT.
   ENDLOOP.
FREE LINES. CLEAR LINES.
ENDFORM.                    " READTEXT

Problem with buttons in repeated table header

I have a bunch of tables that expand/contract at the click of a button in their respective header rows.
The problem I'm having is when a table breaks to another page the button doesn't work properly in the repeated header - the scripted value isn't making it to the repeated button (I've also tried checkboxes).
Is there any way to make this happen? Should I try using variables to store a flag or something like that?
https://acrobat.com/#d=m7zuQYiUoFrtz5isD7rErQ

This issue is that the second header is an instance of the first, so all unmanaged relative code breaks. I would hazzard a guess to say that your add code looks like "$.parent.row1.instanceManager.addInstance(1)." This will break, as the "second" header row no longer sees the 'table' element as it's parent.
Changing to code to a static reference will fix it... i.e. xfa.form.form1.table1.row1.instanceManager.addInstance(1).
This should solve it for you... if not, let me know.
- Scott

Repeating Table header rows ?

Tables need one or more header rows that repeat when the
table breaks across pages.
Speaking of breaking, do not let rows break across pages
(unless they are taller than a page). Don't make it an option; just
never do it.
Cheers

Hi Richard,
I will respond to you below!
quote:
Tables need one or more header rows that repeat when the
table breaks across pages.
This is on our list of tables enhancements for the future,
thanks!
quote:
Speaking of breaking, do not let rows break across pages
(unless they are taller than a page). Don't make it an option; just
never do it.
We never break table rows across pages even if it is taller
than the page; any content that exceeds the available space on a
page is clipped.
Regards,
Pete

Texts get "stuck" and won't send without restart. Help.

I have had my S4 for just about 12 months. Over the last 2-3 months I have been having a horrible time sending texts. It is not related to the strength of my signal because it happens EVERYWHERE. In order to send a text that is "stuck", I have to restart my phone and resend my text. I am running on the most current software. Any advice?

Its a software bug with the kitkat update, its easier just to enable airplane mode then disable it

Files in Macintosh HD bold and won't open

Hello,
the files in my Macintosh HD folder (when accessed from my Desktop) have a doubled font and they won't open.
How can I fix this issue? I've also included a screenshot. Just got my Mac yesterday.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Display data in bold and red in color in side a table control cell

Hi,
I need to display data in side a Table Control cell with Bold and Red in color, can any body help me how to do it.
Regards,
Srinivas

The gui does not support the coloring in table controls. You can set the hightlight attribute, but this will only make the text blue in color. There is no way to make it any other color.
Regards,
Rich Heilman

Repeating table header text is bold and won't go

Similar Messages

Maybe you are looking for