Repeating warning message everytime I sync - help

Everytime I sync my iphone (4) i keep getting warning messages for "a newer version of x app already exists in library. do you want to replace it?" It does this for a lot of the apps I have and it doesn't matter which option i select, it still comes up again the next time I sync.
What gives? Its getting very old having to choose an option everytime for 8-12 different apps.

Have you checked to make sure the Date and Time are set correctly on your iPod Touch?  Did you also make sure that the time zone was correct as well?
I'm assuming the date, time, and time zone are also set correctly on your iMac?
Have you tried restoring the iPod from a backup in iTunes to see if that helps?
B-rock

Similar Messages

  • Warning message on 6680! help!

    i keep getting an error message saying "not enough memory to recieve SIM messages. delete some data first."
    both my phone memory and memory card have plenty of space, and all my text messages go straight to my memory card anyway, but this message keeps appearing every 5 minutes!
    Anyone got any ideas!? Help!

    The phone is refering to messages stored on the SIM card, usually these are silent messages sent by your service provider. You should be able to open messaging application, and in the top level click Options - SIM Messages, and then delete some from there. Alternatively you might have SIM ATK which you can do the same.

  • Capturing warning message in BDC recording

    Hi all,
    I want to capture a warning message that is getting popped during BDC recording. When BDC is ran in background, it is stopping at that point and further processing is stopped with the display of this warning message.
    Can anybody help me in capturing this warning message?
    Thanksm
    Archana

    Hi Avinash,
    I am trying to change the profit center using this BDC. So, when i change it, this warning is displayed and it goes inside one more window and coreects the new profit center added in the previous window. So, this warning message is necessary to be displayed. But my problem is that because of this message my BDC is also not proceeding further.
    Hi Bhavesh,
    The warning message is getting displayed as a pop-up. I am not getting any information about the screen number. I know the prgram for that but no the screen number. And can you please tell me what that piece of code does? So that i can try it out in my BDC.
    Thanks,
    Archana

  • Should display warning message.

    Hi gurus,
    i have a quiery....
    Customer palced sales order (OR), order done. Now customer has taken loan againest of that sales order.when end user trying to change the price of the particular sales order, system should not allow him and must display the warning message.Can any body help me which logic i need to follow on this...
    Thnks,
    Rahkes.

    Now customer has taken loan againest of that sales order
    I am not clear on this concept.  In normal circumstances, only manufacturer will receive advance payment from customer.  Here, why the buyer has taken money from the supplier ??
    Nevertheless, all FI related transactions will be stored in tables like BSEG, BSID, BSIS etc., where you can see a field "Reference" or "Header Text".  Here the FI people has to key in the related order reference and based on this field, you have to apply a logic  in sale order user exit such that if there is a change in price, system should trigger a warning message after checking the above tables.
    thanks
    G. Lakshmipathi

  • Gtk warning messages

    I get this warning message everytime I try to run something from terminal:
    [jinn@estergon .dc++]$ gvim files.xml.bz2
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    (gvim:3484): Gtk-WARNING **: Kan inte hitta temamotorn i "module_path": "xfce",
    [jinn@estergon .dc++]$
    I have just installed xfce4 4.4 svn, related? I dont know how to fix this.. its annoying

    Um, why are you trying to open a *compressed* file using a text editor?  Does gvim support this?  I think you first need to 'bunzip files.xml.bz2', then open 'gvim files.xml'.

  • Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

    Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

    Welcome to Apple Discussions!
    Is all the software on your computer up to date?
    iTunes
    iPod Updater
    Also, try The Five R's
    btabz

  • Misleading warning message after syncing iPod touch via iTunes

    I have a 2nd gen iPod Touch running iOS 4.02 and am using iTunes 9.2.1 on my MacBook Pro running Mac OS X 10.6.4
    When I sync my iPod Touch via iTunes, by clicking the Sync button ( and without changing any settings on the iPod Touch ) I get the following strange situation.
    In the middle of the sync process, the Sync button in iTunes is replaced by a Cancel button and an Apply button.
    After the syncing process is completed, if instead of ejecting the iPod touch I select a different row in the Library column of iTunes ( such as Podcasts or Music ), I got a popup warning message that says:
    "You have changed the settings for the iPod "iPod touch". Would you like to apply these changes?"
    I am presented with two buttons labeled respectively: Apply and Don't Apply.
    My question is: Snce I have not changed any settings on my iPod, but only have synced podcasts and music and apps (whatever has changed in iTunes) why am I being told that I have changed the settings on my iPod?

    You've posted in the WRONG forum. You won't get any help here unless your question is about Apple's server hardware.

  • Everytime I sync, my entire library erases... HELP!

    Everytime I purchase something new from the itunes store and go to add it to my itouch, it only adds the new item, then erases my entire library. I recently purchased a tv show and when I went to sync my Itouch, I got a notice saying it would erase everything else to add this one show. I get this message everytime I use itunes. How can I add new music and shows without having to re-sync my entire library everytime????
    PLEASE HELP!!!

    You are using iTunes to place your songs on your iPod, yes?
    You can have your library of music on any drive you wish. You just need to point iTunes to that new location in the Preferences.

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Everytime I try to sync my ipod touch it comes up with the following message 'cannot be synced an unknown error accoued(13019).  Does anyone know what this mean and how I can put it right

    Everytime I try to sync my Ipod touch I et the following message 'cannot be synced An unknown error occured (13019).  Can anyone help

    Try here:
    iTunes: Error 13019 during sync

  • HT1848 i  Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

    I  Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

    Well Authorize the Computer...........

  • My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    First I would just try deleting the SCInfo folder, restart your computer, open itunes and see if you are still getting the error, at that point if you are it is a permissions error with the computer specificaly and not in itunes.
    http://support.apple.com/kb/TS1389
    that is for deleting the scinfo folder. scroll to the bottom of the article and the steps are there

  • Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please

    Im stuck with this message "no bootable device, insert boot disk and press any key". Now i want to go back to mac os but everytime i turn on my laptop that message appear..kindly help... Please .... Im using my usb as bootable device but it cant be detected..

    Reboot, hold the option key down, select OSX when the startup manager appears.

  • Warning Message - Tracknumber of CEvLaunch too high! Help?

    Hi there
    I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
    *Beta-only warning message - not to be localized:*
    *Tracknumber of CEvLaunch too high!*
    I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
    When I click OK a few times on the pop up it then pops up
    *Launch Event without associated track found!*
    *Changed to track 1.*
    I then have only 3 tracks for this song when I know there are many more.
    I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
    FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
    Can anyone help?
    Thanks!

    I have a way around this message popping up (but would still like to know why this error appears).
    I downloaded this free program
    *Midi File Editor 2.01*
    Available here
    http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
    Opened the file, and then saved it as a new name.
    Imported it to GarageBand and it worked with no errors (although the instruments are way off)
    Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
    Yay!

  • TS2529 Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

    Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Maybe you are looking for

  • PremierePro CS6 crashes everytime I use it... everyday. Help!

    I'm having an issue with PremierePro CS6 not responding. This causes me to force quit. It's become part of everyday routine. None of the other applications on my Mac OS X crash. I have checked the amount of memory dedicated to the application Premier

  • Calling LSMW from RFC

    Hello, everyone. This is my first post, so i hope i'm doing it right. I'm using Transaction LSMW to create mass vendors with this input parameters: Project: FI Subproject: AP Object: VENDOR_02 It works fine, with the standar steps and a plain text fi

  • "Missing File" and Publishing errors

    Okay...I'm having two problems and they are becoming INCREDIBLY frustrating. The first one occurs when opening iWeb (1.1.2). I receive an error that reads as follows: "The following errors occurred while trying to open this document: Type: Missing Fi

  • I can't copy and paste images, both in Windows and Linux mozilla

    I can't copy and paste images when using Mozilla for Linux and Windows

  • Add new songs delete the old ones

    When I add a playlist to my ipod nano, it replaces the ones already on my ipod. What is happening? Many thanks Kathy