Repetetive Manufacu.

Dear Experts,
In My company Repetetive Manfuc. process is configured CO-PA is not configured we have two plants 1000  and 2000 Rem Profile is same for both plants but in my one plant 1000 every month i recieved an error message "Error determining the cost estimate" but in my second plant 2000 I not recieved any error i can do MFBF without error .Could you please confirm where I m woring in plant setting...or where I can do cost run for year..
Neeru

Hi,
See below link, it will be useful for your problem
Error determining the cost estimate in MFBF
Error determining the cost estimate
Error determing cost estimate
Regards / US

Similar Messages

  • PLD. How to transfer value from Repetetive area to Start of Report

    Hi.
    Is it possible to get data fromfield in  Repetetive Area to field  Start of Report. I need to get value of some user field in Start of Report. I can get it in Repeptetive area but I can't in Start of Report.
    With regards,
    Maxim Grunis

    Hi Maxim Grunis,
    The answer is:  there are no way to transfer them.  PLD works from top down to the end of report.  It is building printing file on the fly.  The Start of Report know nothing about the other areas.
    Thanks,
    Gordon

  • Urgent Please Help:Repetetive Components in BOMs

    Hello All,
    Is there any way not to allow entering a component number to metarial boms again. i.e Component A 3 PC will be entered in BOM and then Component A 3 PC is being entered again on a new line, is there way to prohibit that issue.Because of our production type it is always being occured and I can not find a solution not to enter same metarial repetetive in a bom.
    If there is no way is there any transaction or smthg to check bom.
    Thanks in advance.

    hi,
    you might want to talk to your developer to put some code in EXIT_SAPLCSDI_006 for component check.Not sure if this would work but looks like a good one to look at
    Thanks

  • Error While Linking Formula field for Repetetive Area Header In PLD

    Hi All,
    I am having a problem in pld..Let me explain...!!!!
    I have a drop down field called Billing Type....My requirement is if the billing type in Time based then it should become number of Hours,if my billing type is Trip based then my Quantity column should become no of trips .I got the logic but when i am linking the formula field with the header in the repetetive area it is not working,but when i paste it some where else it is working,Please tell me any solution for this...!!!my version is 8.81 PL20
    Regards
    Cherry

    Hi Cherry,
    Any formula fields you use in your logic must be on the same area as the linked fields. In your case - as I understand you are trying to link row level fields to a formula based on a header level UDF. What you need to do is to move all your hidden fields used in the formula to the Repetitive Area - don't worry if the field used is actually header level, it still should be fine.
    I would advise not to hide any fields used in a formula until you are 100% sure it's working - as you can then check if all of them show the results you expect. For instance in this case you could see that the header UDF displayed in the Repetitive Area is repeated in every line and so any formulas based on this field will work well.
    I hope this helps.
    Regards,
    Nat

  • Serial Number Profile in repetetive manufacturing :-

    Hi all ,
    I have a issue related to use serial number profile in repetetive manufacturing industry.
    In my client scenario there is  one finished good product which is produced internally inside the plant where repetetive manufacturing scenario is using by using 'mfbf' or 'mf42n' transaction.In this both we are doing GR & GI posting together in one shot.
    Here one more scenario is that, one semifinished good is also consuming while manufacturing the finished good(repetetive) & the same semifinished good is produced in different plant by descrete manufacturing & consumed in this plant where repetetive is going on inside the finished good.
    In both the cases they want to use serial no.
    1. For semifinished good which is a finished good for a plant & then transfered or sell to different plant .
    2. For finished good manufactured by repetetive method.
    Here the problem is after getting the stock of semifinished good i have got the serial no. & then transfered the same serial no. to the new plant . at the time of manufactre finished good system is asking serial no. for finished good & consuming the semifinished good but here i also want to consume or capture serial no. of semifinished good.
    How to consume this serial no. of semifinished good , means pop up should come for both the material finished good & semifinished good.
    I am using two different serial no. profile for both the product with stock check indicator as 2.
    Serializing procedure for semifinished good :- MMSL  03 01 & PPSF  03 01
    Serializing procedure for finished good        :- PPSF  03 01
    I would be highly thankfull to you if you provide the best solution .
    Regards
    Piyush Sharma

    please check here (may be it will help a bit):
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c814b3f911d1896e0000e8284931/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5aa004adc11d189740000e8322d00/frameset.htm

  • Rework in Repetetive Manufacturing

    Hi PP gurus,
        I wnat know is there any way to make rework orders for repetetive manufacturing in MTS. Please guide me how to capture the rework in repetetive manufacturing environment.
    Thanks in Advance
    Regards
    Ramana

    Hi ramakrishna,
           We can do the as you said. but here the scenario is that REM will not have any prd. order So the cost collection for the particular product including the rework will not be possible.
    This is also a one kind of solution when we have to capture only rework cost in the organization.
    Thanks
    ramana

  • Problem in repetetion of the value of parent group element in each PDFpage

    I am using data template in BI PUB. I have table containing Region_Name , Sales_Rep_Name and amount. I need to show the region_name(parent group element) on the top(not in header) of the next and subsequent pages . under same region_name if sales_rep_name(child group element) is large enough not to fit in a single page, then same region_name should appear in the next page. But this name is not repeting in every page of the generated PDF.
    QUERY: SELECT region_name,sales_rep_name,SUM(amount) amount FROM edwods_bipub_test
    GROUP BY region_name,sales_rep_name
    ORDER BY region_name,sales_rep_name
    Data Structure for the above query: <dataStructure>
              <group name="g_region" dataType="varchar2" source="Q_weekly_summary_by_salesrep">
                   <element name="region_name" dataType="varchar2" value="REGION_NAME"/>
                   <group name="g_sales_rep" dataType="varchar2" source="Q_weekly_summary_by_salesrep">
                        <element name="sales_rep_name" dataType="varchar2" value="sales_rep_name"/>
                        <element name="amount" dataType="number" value="amount"/>
                   </group>
              </group>
         </dataStructure>
    Please help me at [email protected]

    create a formula column
    function Cf_clientaddressformula
    return varchar
    is
    clientaddress VarChar2(1000);
    begin
    Select DeCode(:Address1, Null, Null, :Address1)||
    DeCode(:AddressN, Null, Null, Chr(10)||:AddressN)||
    DeCode(:City, Null, Null, Chr(10)||:City)||
    DeCode(:State, Null, Null, Chr(10)||:State)
    DeCode(:Country, Null, Null, Chr(10)||:Country)
    DeCode(:PostalCode, Null, Null, Chr(10)||:PostalCode)
    Into ClientAddress
    From Dual;
    ClientAddress := LTrim(RTrim(ClientAddress,Chr(10)),Chr(10));
    return(ClientAddress);
    End;
    assign this cf to the address field in your report and set that field "Vertical Elasticity" to "Variable"
    Hope this will solve your problem.
    Sumanth

  • Using To Do lists for repetetive tasks to appear on monthly calendar?

    I would like to format a household zone cleaning schedule (aka "FlyLady" for those familiar) and use iCal in place of the printed lists or 18 daily emails her system currently sends.
    How do I use the To Do list feature in iCal and attach them to the date the tasks are due then set them as a repeating appointment? I know how to set an appointment to repeat, but can I set a To Do as a repeat appointment?
    For example: If I am working in Zone 1 (Week one of the month) is kitchen and front porch has 12 points of deep cleaning in those area in addition to the daily tasks of each day of the week (Mon is paperwork & misc, Tues is Groceries & errands, Wed is regular housework, etc.
    All of this is on printed sheets in a binder and I would like to get it into iCal, but not clutter up my monthly view. It would be idea to put my To Do feature to it's best use.
    Thanks you so much for any assistance.
    Thank you.

    I would like to format a household zone cleaning schedule (aka "FlyLady" for those familiar) and use iCal in place of the printed lists or 18 daily emails her system currently sends.
    How do I use the To Do list feature in iCal and attach them to the date the tasks are due then set them as a repeating appointment? I know how to set an appointment to repeat, but can I set a To Do as a repeat appointment?
    For example: If I am working in Zone 1 (Week one of the month) is kitchen and front porch has 12 points of deep cleaning in those area in addition to the daily tasks of each day of the week (Mon is paperwork & misc, Tues is Groceries & errands, Wed is regular housework, etc.
    All of this is on printed sheets in a binder and I would like to get it into iCal, but not clutter up my monthly view. It would be idea to put my To Do feature to it's best use.
    Thanks you so much for any assistance.
    Thank you.

  • Problem in REM Backflush in Repetetive Mfg

    Hi
    i got the following error when i try to run the REM BACKFLUSH in repetitive process. (MFBF)
    " Update control of movement type is incorrect (entry 131 _ _ _ F)
    Message no. M7226
    Diagnosis
    The system could not find entry 131 _ _ _ F in any of the movement type control tables."
    if any body having any idea kindly guide me
    Thanks in advance
    siva

    Hi,
    Good afternoon and greetings,
    Please go through the following OSS Notes
    Note 216633 - MB01: Error M7 226 for automatic PO
    Please reward points if found useful
    Thanking you,
    With kindest regards
    Ramesh Padmanabhan

  • QM in Repetetive manufacturing

    Hello Guru's,
    I have maintained inspection type 13 for in process inpection for repetitive manufacturing. Guys, please tell me where the inpection lot is created because there is no concept of confirmation, only backflushing. Thanks in advance and due points will be rewarded.
    Cheers
    Jag

    Hi,
       In repetitive manufacturing  confirmation is doing by backflushing tcode MFBF.
    GI backflush at GR posting. That you can check in SPRO> Repetitive manufacturing> Define Repetitive manufacturing profile
    After doing MFBF the inspection lot will be create. That you can check in MD04.
    For result recording & usage decision you can use QA32.
    Regards,
    Dharma

  • WIP for Repetetive continuous process

    Hi,
    Can any one clarify how the WIP will be calculated in Repetitive manufacturing for process industry. The production is continuous with output of 50MT/Hour until there is a shutdown. The materials will always available and flowing throght the pipe lines.
    thanks and regards
    Murugean

    Dear Mario,
    I agree to your point that if we are doing final backflush there will be no WIP for REM.
    Assume that they start the plant initially there is nothing in the pipeline and reactor. The raw materials are feed from the pipeline continuously. The reaction started and the plant starts deliverying output.  When we do backflush we can do GR for the finished product and the Goods issue for the raw materials. But the complete system pipeline and reactors are filled with materials.  Is it not to be considered as WIP.
    The  production plant is continuously working and deliverying output at a rate of  50 MT/HR output.
    So the quantity of raw materials equivalent to the materials initially loaded to fill the reactor and pipelienes will always be in the sytem. Is it ti be considered  as WIP.
    thanks and regards
    Murugesan

  • Repetetive manufacturing

    I want to know the whole process flow for creating cost collectors for materials so that i could perform month end transactions for a plant that uses repetitive manufacturing. I know the month end transactions like CON2;CO43;KKS5 and C088 but i am not familiar with the whole process of creating cost collectors confirming activities so that i could perform month end transactions.

    Dear Aparna,
    1.You havee to create the Master data like material master( REM Profile assigned for all the Inhouse
    manufactured materials & REM allowed indicator in MRP4 view of the material master)-> BOM->Work
    centers -
    >Rate Routing/Routing-----> Production version -
    > for combining the BOM & Rate routing.
    2.Once after creating production versions you have to create the Product Cost Collectors for all the
    materials for which you have created Production versions.For creating product collector you can select
    either based on Production version or BOM & routing combination or else Planning plant.These 3 are the
    controlling levels of a product cost collector.
    3.Product Cost Collectors can be created using KKF6N or KKF6M.
    4. For those products which you want to do production confirmation through MFBF,a product cost collector
    should exist.Otherwise confirmations cannot be carried out using MFBF.
    5.So the cost get's accumulated in the respective materials product cost collectors whenever some
    confirmations are made through MFBF(Activity backflush or Assembly Backflush or Component Backflush).
    Check & Revert back.
    Regards
    Mangalraj.S

  • Mysterious Repetetive Crashes. *Help!* *Panic*

    My iMac has been giving me grief. Lately it seems to run slow and hesitate (my processor speed is set to automatic), but even worse I have been randomly and frequently crashing. Yes, the grey sceen of death (w/power symbol) appears telling me to hold the power button, inevitably 5 seconds later the fans begin to race like a plane taking a nose dive. There seems to be no pattern to the crashes, except that I can never get it to start back up after an incident. Instead it will turn on (no chime), the screen stays black, and then 20-30 seconds later the fans race, so I hold down the power button again. These impotent restarts only serve to help me eject whatever disc is in the drive and put in my install disk. Reseting the P-RAM doesn't seem helpful (and no the chime never sounds when I do this either). Running Disk Utility off of the install disk finds nothing and then with a restart from that I'm back in business.
    So now in panic mode, fearful of hard drive issues I'm backing everything up like a mad man. I don't know if mentioning the heavily advertised "lifesaver" TechTool Pro 4.1.1 will help, but it gives me a clean bill of health too.
    I'm not using any oddball freeware/shareware programs either. Which makes this so wierd.
    Occaisionally my gray screen of death will have code written across it. I haven't written it down, but sometimes it says something about a debugger and Darwin and lots of numbers. Wish I could understand it, but no luck.
    Perhaps someone made the first Mac virus? If so I'm beginning to suspect my computer of being the guinea pig.
    My next step may be a wipe and reinstall as tedious as that is. Somebody please send me advise.
    Thanks in advance,
    Jason

    TechTool Pro 4

  • Bookmark repetetive word in a document -VBA

    Please assist how to place bookmark to a partcular word which keeps on repeating after few pages in document.

    This is looking increasingly like a homework question.

  • 2006/2007 White Macbook Erase Difficulties

    Hey,
    I was hoping to give away my macbook and chose to do a 7-pass erase before doing so.  The computer had reached the 5th pass out of 7, when I made a huge mistake.  I've been using the computer without its battery, solely on the charging cable, due to the battery failing.  For some reason I blanked and unplugged the computer from the wall, killing it in the process.  Now, all I get when I turn it back on is the grayish blue screen that usually comes on before booting.  And that's all I get.  The computer sounds like it's processing something, but it sounds like a repetetive process (like when a computer can't properly read a disc but tries over and over again).  Is there anyway to fix this?
    Thanks a ton for any possible assistance,
    Paul

    Prepare Your Mac for Sale
    Boot from the OS X Installer Disc One that came with the computer.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
    Do not bother with multi-pass zeroing. One pass is quite sufficient and takes much less time.

Maybe you are looking for