Repetición notas

Estimados.
Me ocurre que las notas que escribo en mi iPhone o iPad se ven varias veces repetidas cuando se sincronizan por iCloud en la aplicación notas de mi Mac.
Al parecer a medida que se escribe la nota, el historial o versiones va quedando en el Mac (OSX Mountain Lion) quedando un registro repetido varias veces cuando uno ve "Todas las notas".
Quedo atento a vuestra colaboración.
LVA

Essas mensagens nao indicam o erro, sao normais no processamento.
O erro é outro.
Nao tem filas paradas no PI/GRC? Veja na SMQ2.
Abs,
Henrique.

Similar Messages

  • Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

    I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes.  One would assume they are formatted properly to work on Apple equipment, yes?  Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three.  They were from the $4.99 Sci Fi collection:  Enemy Mine, Dune and Terminator 2.  Oldies but goodies.  The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films.  Any advice?

    I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
    Unbelievable.

  • Not work tablet UI on Prestigio 5080 PRO tablet

    I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

    Would it be possible for you to share the problematic pdf and OS information  with us at [email protected] so that we may investigate?
    Thanks,
    Adobe Reader Team

  • Re: Column is not getting displayed in the BI report

    Hello Gurus,
    I have developed a BI report with more number of parameters.
    Case 1:
    When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
    Case 2
    I tried to put the blank column as parameter, The Program works with out displaying that column data.
    I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
    I have checked the code, Parameter description, length, Template and data definition.
    Please help.
    Thanks,
    Sreekanth

    Hi ,
    For that column did u changed any alias name in the query...
    check ur template once by loading the xml data...
    check that column form field that matches with the xml tag or not..
    Thanks,
    Ananth

  • Can not refresh view data in STRUST

    I am using the JSP (STRUTS) for developing my App.
    I get a list of contact. In bellow it, I make a link for each contacts.
    When i view details of one contact. On click link below.
    My pages:
    listcontact.jsp
    contactdetails.jsp
    When i request a details of contact from list contact -> View successfull.
    But when i refresh the contactdetails.jsp page. I got a message error:
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
    I have to use:
    response.setHeader("Cache-Control","no-store");
    response.setHeader("Pragma","no-cache");
    But can't refresh any way this page.
    Plase show me the way to solve it.
    Thanks
    Vu Nguyen

    hi,
    Here are codes
    listdata = new CompanyListData();
    companyList = (ArrayList) session.getAttribute("datalist_company");
    if (companyList == null)
    companyList = (ArrayList) listdata.getCompanyList(datasource);
    session.setAttribute("total", companyList.size()+ " companies");
    session.setAttribute("datalist_company", companyList);
    return (mapping.findForward("success"));
    And for details:
    if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
    addressData = new AddressDetailData();
    addressItem = addressData.getAddressItem(datasource, companyId);
    session.setAttribute("addressDetail", addressItem);
    I got companyID by:
    String companyId = request.getParameter("companyId");
    return (mapping.findForward("success"));
    Please gest the problems that.
    Thanks,

  • If image file not exist in image path crystal report not open and give me exception error problem

    Hi guys my code below show pictures for all employees
    code is working but i have proplem
    if image not exist in path
    crystal report not open and give me exception error image file not exist in path
    although the employee no found in database but if image not exist in path when loop crystal report will not open
    how to ignore image files not exist in path and open report this is actually what i need
    my code below as following
    DataTable dt = new DataTable();
    string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
    using (SqlConnection con = new SqlConnection(connString))
    con.Open();
    SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
    cmd.CommandType = CommandType.StoredProcedure;
    SqlDataAdapter da = new SqlDataAdapter();
    da.SelectCommand = cmd;
    da.Fill(dt);
    foreach (DataRow dr in dt.Rows)
    FileStream fs = null;
    fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
    BinaryReader br = new BinaryReader(fs);
    byte[] imgbyte = new byte[fs.Length + 1];
    imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
    dr["Image"] = imgbyte;
    fs.Dispose();
    ReportDocument objRpt = new Reports.CrystalReportData2();
    objRpt.SetDataSource(dt);
    crystalReportViewer1.ReportSource = objRpt;
    crystalReportViewer1.Refresh();
    and exception error as below

    First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
    Second : Drag And drop this image Filed Where I want.
    private void LoadReport()
    frmCheckWeigher rpt = new frmCheckWeigher();
    CryRe_DailyBatch report = new CryRe_DailyBatch();
    DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
    DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
    DataTable dt = GetImageRow(table, "Footer.Jpg");
    report.SetDataSource(dt);
    crv1.ReportSource = report;
    crv1.Refresh();
    By this Function I merge My Image data into dataTable
    private DataTable GetImageRow(DataTable dt, string ImageName)
    try
    FileStream fs;
    BinaryReader br;
    if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
    fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
    else
    // if photo does not exist show the nophoto.jpg file
    fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
    // initialise the binary reader from file streamobject
    br = new BinaryReader(fs);
    // define the byte array of filelength
    byte[] imgbyte = new byte[fs.Length + 1];
    // read the bytes from the binary reader
    imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
    dt.Rows[0]["Image"] = imgbyte;
    br.Close();
    // close the binary reader
    fs.Close();
    // close the file stream
    catch (Exception ex)
    // error handling
    MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
    return dt;
    // Return Datatable After Image Row Insertion
    Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Apple Mini DVI to Video Adapter is not working. Please Help...

    I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

    We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

    Hello,
    I have IPod 80GB which I rarely use. Yesterday  when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
    When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
    Later when I wanted to play, I noticed I had no audios in iPod at all.
    Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
    I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
    Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
    Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
    I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
    Thanks

    I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

  • Cannot sync, error message "could not be read" for an iPod no longer in use

    I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
      Windows XP  

    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
    Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

    i have tried:
    reloading itunes
    unchecking 'write'
    removing lower filters in regedit
    ensuring i had the correct 'gear' info in the upper filters in regedit
    removing 'gear' from regedit, system32
    reloading updated version of 'gear'
    cleaning my registery
    deleting itunes
    cleaning registry again
    reloading itunes
    cleaning registry again
    i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
    i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
    when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
    the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
    and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
    the above is not the case as it also popped up for me to import cd to itunes.
    i tried to copy and past the entire contents here but it would not allow me to paste.
    please help!

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Maybe you are looking for