Repetitive areas not displayed in outgoing payments PLD
dear all,
I am creating a PLD for the out going payments-accounts. i created a fresh PLD with the following items in the repetitive areas, and their content as follows..
line number - formula - LineNum()
A/C code - database - Table-VPM4(outgoing payments - accounts)
Column-AcctCode(Account)
A/C Name - database - Table-VPM4(outgoing payments - accounts)
Column-AcctName(Account Name)
Description - database - Table-VPM4(outgoing payments - accounts)
Column-Descrip(Description)
Amount - database - Table-VPM4(outgoing payments - accounts)
Column-SumApplied(Paid)
if I see the preview with the above repetitive areas, the page is blank and no data is appearing on the page...
what is the problem here.. why is the fields not appearing on the paper... have I done anything wrong.. please help me..
regards,
Yeshwanth
Hi Yaswanth,
Please check where the outgoing payment was made by selecting ACCOUNT while making payment entry.
Make sure there Customer/Vendor/Acount/PLA.
If you seelce account then the data should be there otherwise it won't be there.
Regards
Chidambaram
Similar Messages
-
GL Accout Name Display in Outgoing Payment PLD
Dear All
I want to Display GL Account Name in Outgoing Payment PLD in Case
of client payment through Cash.
I am working on SAP B1 8.8. with Account Segmentation.
Please Suggest me...
Regards
ShekhawatHi Shekhawat,
it is not possible on direct PLD
so Create 1 UDF & assign the below FMS in UDF field and use that UDF field in Outgoing Payments PLD.
Try this,
-> Create 1 UDF (G/L Account Name) on Outgoing Payments.
-> Assign the below FMS in UDF (G/L Account Name) on Outgoing Payments.
SELECT T0.[AcctName] FROM OACT T0 WHERE T0.[AcctCode] = $[OVPM.CashAcct]
Auto Refresh of Remarks field.
Regards,
Madhan. -
Reg: Outgoing Payment PLD
Hi All,
In Outgoing Payment we have an option Customer / Vendor Reference Number, once i enable it displays the Vendor Reference Nos entered in A/P Invoice for the selected Supplier
My requirement is to design the Customer / Vendor Reference Number in PLD.
Can any one suggest me to configure the same.
Currently we are using 2005B PL - 35.
Regards
ShankerHi Shanker,
In SAP B1 Behaviour, It is not possible in Row Level on Outgoing Payments PLD.
Normally it is not able to retrieve in Repetetive Area on Outgoing Payments PLD.
Customer/Vendor Reference No. is HardCoded in Outgoing Payments.
but Other Invoice Payments Details are stored in Table -> VPM2 - Outgoing Payments - Invoice.
But, Customer/Vendor Reference No. is have Default in System PLD. See the Outgoing Payments(System) PLD.
->> Open the Outgoing Payments(System) PLD.
->> Documents Payment (Variable)Field in End of Report On System PLD.
Documents Paid Variable - 130.
->> Documents Payament Field will display the Customer/Vendor Reference No. and A/R Invoice No., Date and Total Amount (or) Journal Entry No., Date and Total Amount .
Otherwise, if you need the Customer/Vendor Reference No. in Repetetive Area. Try to Query PLD.
Regards,
Madhan. -
Bank Name Within Outgoing Payment PLD
Dear All,
My Client is working on SAP B1 2007 B PL10. Now my client wants Bank Name to be displaced in the Header Level of the Outgoing Payment PLD.
Please guide me in this matter.
Regards
Hitesh ParsawalaHi Hitesh,
Try this,
->> Create 1 System Variable Field in Page Header on PLD.
Bank Name
Variable -> 126.
->> Goto Properties Window and put the Tick mark in Description on Content Tap.
OR
Try to Create FMS Query and assign the FMS in UDF.
Create UDF in Header on Outgoing Payments.
->> Choose Tools on Top menu.
->> User - Defined Fields. -> User Manage Fields.
->> Open the User Manage Fields Widnow.
->> Payments -> Title.
->> Select Title and Click Add button in Bottom on User Manage Fields Window.
->> Create Bank Name UDF(Code, Discription and Type - Character) and Add the UDF.
Create FMS in Query Generator and Save as Query Manager then Assign the FMS in UDF for Bank Name.
->> Adminstration.
->> Reports. -> Query Generator.
->> Open the Query Generator and put the below FMS query.
SELECT T0.BankName
FROM ODSC T0, VPM1 T1
WHERE
T1.BankCode= T0.BankCode
AND
T1.DocNum= $[OVPM.DocNum]
->> Assign the FMS in UDF on Outgoing Payments.
->> Auto Refresh of REMARKS or other require field
Ex.
1. Goto the UDF and Clcik ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select REMARKS.
6. Check the Display Saved Values.
Use this UDF field in Page Header on Outgoing Payments PLD.
Regards,
Madhan. -
Outgoing Payment PLD (Link)
Hi,
How to give link in outgoing payment PLD?
Thanks & regards,
Mohit SoniHi,
Are you link to Page Header or Footer, Repeatetive Area Header or Footer FIELD?
Where r u link to FIELD ID?
for ex.
IF you link to field ID in PAge header field, then u can link same index(Page header) field id. -
Add additional table in Outgoing payment PLD.
Dear Expert,
Can i know how to add additional table which is VPM4 to my Outgoing payment PLD to show out the Bank GL account number? In original outgoing payment PLD does not have this table.
Regards,
VivianThe "system print layout templates" provided with SAP Business One can be "saved as" and users can customize them according to their company needs. Due to the database structure not all the tables can be related to any field in any template.
You can bring additional table in to PLD by Using ALT + clicking on the "Table" field opens the entire list of tables, including the tables that do not appear by default. -
CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls
Hi Team,
we are running CUCM 9.1(2a),
we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
Regards
AnanthakumarAre A and B both Avaya phones?
So it looks like you're not seeing the alerting name/connected name getting updated then? Do you have alerting names configured on the directory numbers? Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it. Might just be something that needs to be tweaked in the 46xxsettings.txt file. -
ESS - Loan details are not displaying
Dear All,
Applied loan from Portal and it is updated in R/3 Infotype 0045 - loans.
But these created loans are not displaying in ESS - Benifits & payments - Loan Request.
Please help me in solving this issue.
Regards,
Potru.Hi,
Could you please check if you have maintained the customizing tables correctly in the Payroll-India->Employee services->Loans in spro.
Also check if you have configured the loan types in V_T7INLOAN_TYP.
Hope this helps
Regards,
Roy -
Umlauts are not displayed correctly in different programs
Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)Did you check the locale settings on your Windows machine?
-
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun -
Excise duty rates are not displayed in J1IEX
Dear friends,
Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
Thanks and Regards
ETR.Hi Maladri,
Thanks for your reply.
I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
But it has updated 10 days before all values came properly in J1IEX.
Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
Kindly guide me
Thanks and Regards
ETR -
I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!
It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup. -
Search for member activities - points are not displayed correctly
Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
AnneSometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt
Maybe you are looking for
-
I'm trying to download a FREE app, and when I do, it: 1. Tells me to sign in (what it usually does) 2. Takes me to Account Settings [Payment Method], and in red letters it reads: There's a billing problem with a previous purchase. Please update yo
-
IDVD 08 is a bummer. How do I return to an older version?
I had iLife 04 on my Mac for ages, but I just bought and installed iLife 08. Mistake! IDVD 08 will not open any of my old iDVD projects; it just sits there with the beachball spinning or doing nothing at all. All the old projects now have the blue an
-
FI invoices not picking up Terms of Payment
Hi, We have FI invoices (Posted through FB60) for freight charges. These invoices hit frieght expense account instead of being posted against a PO. The problem is that when these invoices are posted, they are due immediately. We checked the payment t
-
Are there preferences or some other settings that can be adjusted to significantly improve the import speed? On a system with an e6700 processor, SATA mirror drives, and 4GB of memory running XP64 - I dump a dozen or so directories with around 9500 .
-
Cannot add mailbox database copy to DR site - .edb file not getting created
I have a DR site setup that I want copies of 4 of my mailbox databases. 3 of the mailbox databases copied over successfully but the last and largest one which is really not that large 69Gbs keeps failing when i Update the database copy. Seems to no