Repetitive manufacturing - Planned order

Hello,
I have got a list of 'firmed' planned orders of repetitve manufacturing. How to unfirm those planned orders in mass?
Regards.

Dear Mangal,
I re-checked in the system & MD19 does not have option to go by planned orders. Further the options which exist are for single entry.
However I wont say that the BAPI is the only solution, as the need in the initial query just states there are many firmed planned orders. It does not provide further details, so if its just for a single material or MRP cont. etc then MD19 should suffice.
But if the planned orders are for different materials, then user has to do multiple MD19's or if the effort justifies the business need, then develop a Z program.
Regards,
Vivek

Similar Messages

  • Repetitive Manufacturing planned order long text

    In our scenario, we will use the repetitive manufacturing process with planned order.   However, the users would like to attach the long text for each planned order. 
    Is there any use exit or BADI to support this?
    Regards,

    Hi ,
    i think there is no user exit or BADI which can work in your case.
    When we required similar functioanolity we landd up in desigining entirely new Z tocde which would accept the long text ofr the plan orders and save it.
    we created coplue of ztables to store the plaf link.

  • Repititive Manufacturing-Planned orders

    Hello Experts
    I have a REM planned order having a quantity of 100 nos. If I do GR of 110 for this planned order,it will give a warning message number: RM124: "Backflush qty> plnd ord qty. Over delivery for planned order carried out". I dont want over delivery. So I would like to make this message to error. Which is the tcode in spro.
    Is there any other way to prevent overdelivery.

    Dear ,
    I do not think Over delivery or under delivery tolerence in GR  can be given in Planned Order level .Basically this tolerence level are in Work Scheduling view which is not applicable in REM scinario.
    To my knowledege , there is no such configuration set up to avoid execss GR in REM .We need to think some txan variant  OR User exit in MFBF level
    Re: User Exit For MFBF
    User exit in planned Orders
    Regards
    JH

  • Planned order generation

    Hi ,
    After running  MD50 for repetitive manufacturing, planned orders are not being generated.
    Please suggest what could be the reason.
    Thanks.

    Is the requirement is MTO? If its MTO definitely you can get the plan order for sale order requirement.in MD50
    If its not relevant to MTO, then run the MRP in MD02

  • REM Planned Orders being generated with Order type LA instead of PE

    Hi All,
    I'm running the Repetitive Manufacturing scenario and when I execute the MRP run for my Planned Independent Requirements, Planned orders are automatically generated with the order type LA. I understand that for repetitive manuf., planned orders should have the order typ PE.
    Is there something missing in config? How can I get the orders to be generated with the Order type PE??

    HI,
    Check the following settings which is required for REM
    1. Master Data -
    - Create Material master - MM01
    -Create BOM - CS01
    -Create rate Routing - CA21
    Create Rem profile - SPRO ->Production planning -> Rem.Manuf->Control data or use existing one
    Assign Bom seelction method = 2 & 3 (Prod version) in MRP view
    Rem MFG indicator - mrp view in MM01.
    Assign the REM profile to a material - MRP view in MM01.
    create Valid Production version - MRP view in MM01 & Check Rem mfg ind
    Assign the BOM and routings in Prod. Version
    2.For Preliminary Cost Estimate:
    Create version specific product cost collecter for Header material and preiminary cost estimate - KKF6N as per the settings in Rem profile. -
    3 For standard cat Estimate.
    create std Cost estimation(CK11n)
    std cost Estimation Mark & release(CK24)
    Thanks
    Hrishi

  • Repetitive manufacturing:backflush

    Dear experts,
                      At my client place , repetitive manufacturing scenario is there.
    While doing back flush, I am facing an error "Argument 1061 not contained in table T437D"
                                     "Message no. RM001"
    Please guide me where I am going wrong in customisation.
    Regards,
    Sameer

    Dear Sameer,
    check for this 2 settings,
    SPRO-Production-Repetitive Manufacturing-Planning-Define scheduling parameters for Planned orders (OPU5),Check
    *whether for order type * or for order type PE - Run Schedule*Quantity for Plant RA01 whether you have maintained the
    relevant required parameters.
    Then also in SPRO-Production-Repetitive Manufacturing-Planning - Planning Table-Maintain distribution for Planning
    table whether you maintained the setting for the plantRA01.
    Once after doing this setting,it gets updated in table T437D.
    Regards
    Mangalraj.S

  • Order type for planned order in repetitive manufacturing

    hi
    In repetitive manufaturing there is no prodcutiion order
    planned order only. so i want know what is order type  for repetitive manufacturing
    In configuration order type for  reptitive is required or not   if  yes  then how will define order type ,where
    In Discrete order type will define to control  prodution order
    like that i want know details about order type in repetive manufature
    ravikumar

    HI
    Planned order in REM is of PE type thar s non convertible in PO and also these planned orders are assigned to PVs thru Planning table and the Confirmation is done agianst these planned orders.
    check these links:
    Re: order type in repetitive manufacturing
    http://www.sapfunctional.com/PP/REM/page1.htm
    Regards
    Anupam Sharma

  • Pick List - Planned Orders in Repetitive Manufacturing

    Hi All,
    Business Process: Cut Planned orders ( No production line, No Routing, No Work Centers). Production done and then these Planned Orders are backflushed.
    Any of you have any idea on how to generate pick list to stage material for these planned orders?
    I know that Production orders can easily be configured to print automatic pick lists but not planned orders. I have been working my heart out to find a solution but couldnot.
    Thanks in advance!
    Siva

    Hi Siva,
    I think action control should work good for your scenario,
    In customizing SPRO->Production->MRP->Planning->Procurement Proposals->Planned orders->Action for Planned orders--->Define action control.
    <b>Define Action Control</b>
    In this workstep, you define the actions that are allowed for the action control function and the sequence in which the system is to carry out the actions. An action can be followed by several other actions and it can also be preceded by several actions.
    <b>Activities</b>
    Define the action control. To do this, define a key and the actions that are allowed and which subsequent actions can follow certain actions.
    <b>Example</b>
    The key 01 is defined. The following actions are to be allowed for this key
    BOME (explode BOM)
    NEMA (check material availability without BOM explosion)
    PRNT (print component list)
    The BOM must always be exploded first. The material availability can only be carried out once the BOM has been exploded. Once the availability check has been carried out, the system should print the component list. The table is then mainatained as follows:
    <b>Control Action Target action</b>
    01  BOME
    01 BOME NEMA
    01 NEMA PRNT
    The action control what is defined needs to be assigned in Material Master MRP4 View under REM section.
    Hope this helps...Reward your points,
    Regards,
    Prasobh

  • Production Order in Repetitive Manufacturing

    Hi All,
    We are using REM scenarios. But we need to use the Production order for some material in the same plant where we are already using REM.
    Is it possible to use both Discrete and REM for the same material but at different periods? Using Discrete for some period and switching over to REM. Is there is anyway to use the above mentioned scenario.
    Kindly suggest.
    Regards,
    Sureshbabu G.

    Hi,
             As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
    To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
    Regards
    Chandra

  • Repetitive Manufacturing and Planning Strategy 52

    Can I run Repetitive Manufacturing on a material with the planning strategy of 52 (Plnng w/o final assem. w/o make-to.stock) ?
    When i try to perform backflush on the planned orders, i am faced with the following error :
    <b>Plnd ord. <i>XXXXX</i> is a plnd order for planning w/o final assembly
    Message no. RM131</b>
    Please advise.
    Thanks

    for planning strategy you can execute production(ie backflush in REM) only after u receive a sales order. please ensure that a sales order is in place.

  • Evaluation Structure for Production Order and Repetitive Manufacturing

    Dear PP friends,
    I am trying to create a Evaluation Structure with reference to an Evaluation Structure (t-code MCR7). I need to join the Standard Evaluation Structures S021 (Production Order) and S026 (Material Usage), but S021 is not appearing to choose characteristics and key figures.
    Does anyone have suggestions?
    My requirement is to create a report where I can see goods receipt x goods issues per order.
    Thanks in advance.
    Marcos

    Hi,
             As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
    To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
    Regards
    Chandra

  • Materials consumption per Planned order in Repetitve manufacturing

    Hi all
    I would like to know if there is a standard way of knowing the quantities that have been consumed for a particular  component in planned orders when working with Repetitive manufacturing.
    Thanks a lot

    Dear Area Operaciones,
    It is not possible to fetch the planned order number either in MF12 or else in MCRP report.
    It is the standard SAP behaviour and you can only get the component's consumption details along with quantity alone in
    MCRP/MCRO report and not with respect to planned order no.
    Regards
    Mangalraj.S

  • WIP FOR REPETITIVE MANUFACTURING WITH VALUATED SALES ORDER

    Dear All,
    We are in the process of implementing Repetitive manufacturing with valuated sales order(MTO). I want to clarify whether in this scenario WIP will be generated.
    Since, at the time of final backflushing, what ever GR done for finished goods, the GI for its components will be done automatically. The components will be issued based on the BOM. I think in this scenario WIP will not be there.
    Please tell me whether i am correct.
    regards
    ranga

    Thanks. I have another scenario. My client wants to transfer all cost of HR,Admin, finance etc and other indirect production cost center cost to production cost center. I mean they want to charge on the product. I have to production cost center. Client will give me the basis for allocating the cost. I have to do assessment and distribution for cost allocation
    But, I want to clarify how do i include the admin, hr or finance and indirect production cost center cost in cost component structure if i do the above process.
    How to do the cost splitting.
    regards
    ranga

  • Planned order to Manufacturing order conversion

    Hi Experts,
    We are in SCM 5.0 & R/3 ECC 5.0.   I have developed one RFC function module in APO, for planned order to manufacturing order conversion, using BDC for transaction /sapapo/rrp2. This rfc function module, iam calling in r/3 program.
    The issue is, using this enhancement, if i put the conversion indicator tick in APO, it is not converted into manufacturing order & subsequently not transferred to r/3 via CIF. But, if i do it directly in APO through normal transaction, it is getting converted into manufacturing order & the same is transferred to r/3.
    What could be the reason ?   Any help is appreciated.
    regards,
    Nagarajan.J

    First of all I think there is inconsistency in what you have reported as the problem.
    "This rfc function module, iam calling in r/3 program"
    "using BDC for transaction /sapapo/rrp2"
    Transaction /sapapo/rrp2 is to query Orders in APO and not for setting conversion indicator.
    Use transaction /SAPAPO/RRP7 instead for mass conversion.
    Also remember just setting the conversion indicator will not suffice. The Planned Order with the Conversion Flag needs to be saved that will trigger CIF transfer.
    Somnath

  • Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

    Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
    Why are the planned orders not displayed anymore. They are still in the system - in  MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared  from transaction MCP9!!!!.Now we are using Version 4.7
    There must be a reason 
    Perhaps searching in  SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
    Or we need to apply an OSS note from SAP to repair the problem...
    Or the info system update must be modified because of rel change... I don't know.
    Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

    Dear Guruji Mr.Rajesha vittal,
    Sir ,iam stuck with this problem,not able to proceed.
    Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
    Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
    I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
    Thanks & Awaiting your reply
    P.S.KIRAN
    [email protected]
    [email protected]

Maybe you are looking for