Repetitive White Screens

I have a problem with my Curve 8520.
At least 4 times a day the screen goes totally white, no clock or error message, and I have to make two battery pulls before it restarts, and most of the times the battery runs totally out in the process, so there are times when I need to plug my device in to get it restarted.
Is there any solution for this?
Is this a battery problem or a device issue?
Thanks in advance for any help you may provide.
Solved!
Go to Solution.

Same issue on Curve 8530, most current OS. Could you list the apps you had installed prior to resolving your issue with white screen. I have the same problem...what I refer to as random white screen, however, I don't believe it is a battery issue with mine. Just out of the blue...my screen will start to fade until it becomes completely white and resolves with a battery pull or soft reset. During this time, the phone still has some function...like during one of these episodes...I received a phone call and heard it ringing but could not answer it and pushing on any key on the keyboard gets no response except to perform the soft reset. I don't have the battery issue like your phone did and mine will restart with no problem. I have had my phone for less than a month and it started doing this shortly after I had it up and running but I don't recall if it did it after I installed apps or prior to. One other interesting point to make is that prior to my current phone..I had my first one and it would fade to white screen as well and I took that one back and exchanged it for my current phone because I assumed that it must be a hardware issue. Again, on that phone as well, I don't recall if I had already installed apps on it or not and it was also same phone, same OS. I have begun to test the various apps I have and believe it may be the toast feature on bebuzz. I checked the event log and it shows in there, for bebuzz, a line containing "Warning! Deprecated API access logged." I don't know for sure what that means but I thought that it may be this because I have actually caught the toast feature come up and the fade to white screen occur a few times but not every time. But, the problem with this theory is that I have this app also installed on my son's phone (same phone, same OS) and it has never happened. I have since turned all the toasts off in bebuzz and am going on the second day with no fade to white screen. And that really doesn't mean anything because my white screen problem does not happen every day. The bebuzz app is the paid version. I've read about this type of problem in numerous posts...each seems a little different like some involve the battery...some can't get it to boot back up...some posts point to a hardware issue...etc...but I have never yet seen an absolute resolve. If you wouldn't mind listing the apps you had installed prior to your resolving your issue or list the app you believe to have been the cause...that would be appreciated. Thank you.

Similar Messages

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Got a iMac upon start up it has white screen with apple logo and loading wheel spinning forever under it, does anybody know how to fix this?

PLEASE HELP!!!!!! EMERGENCY Upon start up normal start up noise occurs, then after white screen with Grey Apple logo, and a spinning loading wheel under it (thee repetitive lines NOT rainbow one) ?!? then thats as far as it goes it stays on that screen forever will not boot up. Any info on how to possibly fix? I've tried several of the Start up shortcuts , it wont even start up in Safe Mode . My fiance' is crushed she is a writer and EVERYTHING SHE HAS WORKED ON is somewhere on that hard drive. Any thoughts, i'm open to any and all LOGICAL responses, thank you very much for ya'lls time ........Its just heartbreaking to see my iMac in this vegistated coma,The whole reason i bought a mac was cause I love them I have Apple EVERYTHING, so once again please help.

Try this: Switch off your iMac wait 10-15 seconds hold down the Option Key (alt) key then press the power botton but keep the option key down. This should show all the available options to boot from. I trust you have a full backup, Good luck.

Menu will not loop and reverts to a white screen after 30 secs

I'm using Encore CS4 to create a picture DVD (a la Ken Burns!). I used the generic Beach background under the travel tab for the menus because I thought it was fitting. Anyway the duration of the menu is 30 secs. I can not for the life of me figure out how to change the duration. The "loop forever" button is disabled when I click on the menu background. Even if I change the duration time it will always go to a white screen after 30 secs (the audio will continue to play however and the pictures I used for buttons are visible)
Any suggestion or ideas on why this is happening? I checked and as far as I can see there are no overrides anywhere in my project. Everything I've found online stated to click the loop forever button...but that isn't an option.
Any help is greatly appreciated. Thanks in advance!

Tye,
One thing to think about, with regards to your Audio. You might want to make sure that you being with a fade-up and end with a fade-down. That way, should it loop, you do not get a noticeable cut in the Audio. Now, your user will probably have chosen a Button and activated it before, but should they have not, the music "appears" to flow. I normally use the same music for all Menus, and these little pieces contain a lot of repetition in them. That helps to create the appearance that its the same piece that plays THROUGH all Menus, when it's really just one separate piece for each. The pieces are such that you can jump into, or out of, each and one has to listen carefully to tell that it's not continuous. I keep dozens of these little pieces handy, or create new ones with the same characteristics, in SmartSound. You just have to choose the right compositions.
Good luck,
Hunt

White screen at reset. Won't start up with install disk.

White Screen persists on restart. Folder with ? appears after a few minutes. Tried safe start - nothing. Tried RAM reset (option, cmd, p, r) - nothing. Tried to restart with C key to use install disk, C drive powers and spins for awhile - nothing. Thought its was hard drive but, wouldn't install disk by pass that?
No outside devices plug in.
Son's computer, he plug in iphone and it wouldn't show on desktop so he reset the computer and now this.
Help!

I have the same issue. I had noticed over previous weeks that the fan seemed to be on quite a lot when the computer was just left idling. Anyway- there is now an odd repetitive intermittent clicking as it tries to start up. Get nothing then the ? folder. I have tried all the tips in the manual. Managed to load utilities disk and there is no recognition of the HD at all. All a bit worrying...
Related questions- (1) are my iPod touch photos saved in full resolution on the iPod (or do you still have to enable the iPod for this?) (2) Can I download them from the iPod to another computer. (3) Can I do the same with iTunes?
If anyone has had a similar experience and been to an engineer / service provider I would love to hear what was found, and whether the HD was recoverable.
Many thanks all-
Rob

White screen turn off imac

hi all,
when i want to switch off my imac it will stay on a white screen and will not close, the circle keeps circeling. when i first take off my usb harddisk all
things went ok, if not take off keeps white,
any methode which i don't need to turn off my usb hd which my imac ( late 2009 27 " ) will turn off. or any methode which my usb hd will turn off automatically
first ( sometime i will forget it to turn off first) and then turn off my imac.
thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Macbook does not shut down or restart. It stops at an blank white screen with the cursor moving around it. Updated to the latest software

I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

When I login to second user account I get a blank white screen.

Just updated to 10.8.3, was also having issues that seemed to be related to Spotlight and TM backups. Issues on my main user account seem to have been resolved, but I have not reactivated Spotlight or TM yet.
When I try to login to my wife's user account, it just hangs on a white screen. I've tried repairing user permissions, and also resetting PRAM and NVRAM. Disk verify checks out fine.

Library/Fonts:
[A hole bunch, removed to shorten post...]
Does the problem account also have a lot of fonts in the home folder? That could be the reason for a login failure. Otherwise see below.
Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
N/A
and definitely remove at least the following:
Logitech Control Center
† PeerGuardian
Hotspot Shield
† Conduit
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
You installed the Conduit spyware. To remove it, back up all data, then follow the instructions on this page:
Help Center | Community Toolbar
If those instructions don't work, proceed as follows.
Triple-click the line below to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Help! When I select "Phone" it tries to open and gives me a white screen and closes. I cannot view my missed calls or voicemails.

If anyone knows anything about this...
When I select "Phone" on my home screen the iPhone attempts to open it, brings up a white screen and then will shut back down. I have 8 missed calls or voicemails yesterday and I couldn't check any of them. Does this happen to anyone else?
Also, when I receive a call and I answer it does not give me the ability to end call or any of my options (sources, keypad,etc.) during the call.
Basically, I can't do anything with my contacts, favorites, missed calls or voicemails.
Can someone please help?

I have tried that multiple times. I have also made sure that I have the latest updates. Would haveing 27,000+ contacts have anything to do with it?
Sometimes it works and sometimes it doesn't

I performed the update to version 7.3.5 and now I cannot undo the update that eliminated a toolbar that I use every day. How do I recover my toolbar? With the upgrade on a windows 7 machine, whenever I open firefox I get a white screen.

Uninstall to my prior version is not working. I need to go back to the original version for two reasons. First, I can no longer use one of the toolbars that was compatible to previous version, but is no longer supported so it was disabled, and two when I try and open firefox from any short cut, I get a solid white screen and I do not get any toolbars nor is there any way to navigate to a tabbed option since I can not see anything and it just hangs there with out going to my homepage or anything else.

Do you see the menu bar or anything else? As for the missing toolbar, this is the case for 90% of Firefox users, for instance the Google Toolbar. To restore it, you need to install Mozilla's Add-On Compatibility Reporter extension from https://addons.mozilla.org/en-US/firefox/addon/15003 and restart Firefox twice.
As for the white screen, I am not sure what you mean, but your install looks corrupted, you probably need to uninstall Firefox and reinstall from scratch. You may spend too much time and effort otherwise. Back up your settings first if you have any, like Firefox bookmarks.

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

In Attachement List Services for Objects White Screen when I Display a Note

Hi Expert,
Need your assistance.
I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed:
1. Go to FK03
2. Open a Vendor
3. Click the Services for Objects
4. Attachement List
5. Select a Note
4. Display it
5. Pop up window appreared and no information occurred. Only White screen
Is there's a missing configuration, plugin, or data in my SAP system/workstation?
I tried to login to other PC and it worked.
Just wondering what is missing on my computer.
Your response will be helpful.

Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar

Trying to update OS to fix White Screen problem.

Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

Creative Cloud White Screen on Start-up.

When I open my Adobe CC is brings me to a white screen only and will not allow me to pass it. I have tried to delete the OBEE file, Change the name of it, and completely reinstall CC 3-4 times with no success, im just bummed that I cant update any of my programs. If anyone can offer some help/solutions regarding fixing this it would be much appreciated! *****(PS. I have included a screenshot of the issue, so you can see exactly what the issue is.

BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Repetitive White Screens

Similar Messages

Maybe you are looking for