Replace 20" ACD with Dell 24 or add Dell 20WFP?

in a dilemna
since the dell LCD are just as good as the ACD from what people say here.... i'm debating selling my 20 ACD and replacing it with a Dell 24", or should i just add a 2nd display being the Dell 2007WFP?
I figure i could get maybe $550 for my ACD so for $200 more i get the Dell 24
or $350 more to add the Dell 20

Hello--
You won’t be disappointed with the Dell 24 inch LCD. I bought one about six months ago and I love it! You’ll especially like the built-in media card readers.
I would only keep the ACD if you have a use for it, have a second computer, or plan to give it to someone. Assuming you have a newer one, they sell for $500 to $575 on eBay. And the Dell...right now they’re selling for $703.20 on the Dell site.
http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku= 320-4335
Wow! I paid $799 for mine (and it’s the previous model!) Good luck and enjoy.
--Jerry

Similar Messages

How to replace one variable with another in large number of queries

Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!

you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

Yosemite System Crashes on Boot with Dell U2713HM

Previously under Mavericks I had no issue with a Dell U2713HM monitor and my 'non-stock' NVidia card. (The reason I'm using the video card I am is because the stock ATI card (ATI Radeon HD 2600 XT) is known do fry itself which I discovered after replacing it with an identical card and having the 2nd one fry itself after a year. I did a lot of research and settle don the card I now have because others had reported success with it. It worked fine for nearly a year until updating to Yosemite.)
After upgrading to Yosemite my system went into an infinite reboot loop on startup. On a hunch, I swapped out my U2713HM for an old 17" monitor and was able to boot. I can't even have the U2713HM plugged in/turned off using the second port on the card without the system crashing. If I get the system booted using the 17", I can then plug in/turn on the U2713HM and set the resolution - at that point I can (sometimes) boot but it will then crash on shutdown triggering an automatic restart.
Is anyone having any success with a U2713HM, and especially with an NVidia card? The only option I haven't tried is a completely fresh, clean install. Once the system boots, I get the dialog that it was restarted because of an issue and can view part of the dump info that will be sent to Apple -> that clearly indicates the issue is with the kernel/NVidia driver somewhere.
System specs: Mac Pro (Early 2008) with an NVidia GeForce GTX 650 1024MB card installed running Yosemite (OS X 10.10)

My mac mini (late 2012, Yosemite installed) doesn't start with Dell U2713HM if the USB cable of the monitor is connected.
No problems if I connect the usb-cable after successful startup. Also the usb-hub of the Dell is working fine then.

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer

How to migrate an existing Microsoft SSIS deployment if it is decided to replace SQL Server with an Oracle database?

Hi Oracle Gurus!
Currently, I am designing an ETL solution that transforms and loads a lot of data from flat files and sends it to an SQL Server 2008 R2 database for storage. However, at a future point of time, it may be decided to add or even replace SQL Server with an Oracle 11g database.
Currently, I am writing script transforms in C# to dynamically generate SSIS packages to tansform and load the data into SQL Server. But considering that in future, an Oracle 11g or 12c database might be added to, or replace the SQL Server database, how do I make my script transforms (or whatever else I am developing currently for SQL Server) reusable to the extent possible?
Or more precisely, what steps do I take, from an Oracle point of view, to ensure that any future migration of data to an Oracle database would be smooth to the extent possible?
Looking up to my Oracle Gurus for enlightenment in this matter!
Novice Kid

When you're writing your on C# code to load data into the SQL Server you have to modify the routines so that they will work with Oracle.
One approach is to use the extproc agent which would allow you to directly call external programs with all the logic in it to perform the load of your files and to put the data into the Oracle database. Another option would be to use utl_file package (or equivalents) which will allow you to open external files from your Oracle database and to directly read its content and then to pass it to the related tables.

LIST MANAGER - Replace popup lov - with stationary scrollable box

Sorry... I thought this was Oracle 10g XE form...could you direct me to right form.
LIST MANAGER - Replace popup lov - with stationary scrollable box...
The end result would be: 2 scrollable list boxes separated by the word ADD / REMOVE. One to select from and the other box to act as collection box
The popup LOV is quick and fast ..but is a little time consuming
Oracle 10g XE
Message was edited by:
user518110

Hi user518110,
1) please update your forum handler to a more friendlier name.
2) I think your are looking for the Shuttle component in Oracle APEX, like on the following page http://apex.oracle.com/pls/otn/f?p=2672:2
If you are using Oracle XE you are probably using Oracle APEX 2.1, you have to upgrade this version to Oracle APEX 3.0 which contains this new control. See http://www.oracle.com/technology/products/database/application_express/html/3.0.1_and_xe.html for details.
Patrick
My APEX Blog: http://www.inside-oracle-apex.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://apexplugin.sourceforge.net/ New!

Replacing existing panel with a new panel.

I don't use swing much and I have ran into a small problem.
What is the standard procedure for replacing a jpanel on a
jframe with another jpanel in the exact same position?
Say you had a form on the first panel, when the user clicks
next it display a new panel with a confirmation of the results
and disposes of the old one.
I have tried add,remove, setcontenpane. setvisible etc but nothing
works. Can someone explain?
Here is a small app which demonstrates my problem:
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
public class FrameTest extends JFrame implements ActionListener{
     JPanel jp1;
     JPanel jp2;
     JButton jb1;
     JButton jb2;
     public FrameTest(String name) {
          super(name);
          init();
     public void init() {
          jp1 = new JPanel(new FlowLayout());
          jb1 = new JButton("One");
          jb1.addActionListener(this);
          jp1.add(jb1);
          setContentPane(jp1);
          setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
          setBounds(0, 0, 200, 200);
          setVisible(true);
     public JPanel panelTwo() {
          jp2 = new JPanel(new FlowLayout());
          jb2 = new JButton("Two");
          jb2.addActionListener(this);
          jp2.add(jb2);
          return jp2;
     public static void main(String[] args) {
          FrameTest ft = new FrameTest("Test");
      * On click I wish to replace panel one
      * with panel two
     public void actionPerformed(ActionEvent e) {
               //What can I add here?
}Regards

I just took a look on the Java Tutorial and it is exactly what I am after.
Thank you.

Replace PC desktop with a notebook (MacBook)?

Would I notice an appreciable loss of performance in LR if I replace a desktop PC with a low-end MacBook?
Or in other words
Is LR performance affected much by whether the catalogue is stored on a dedicated internal 7200RPM drive or a USB 2 external drive?
]Yes, I know this sort of thing gets asked all the time. But I have hunted around and haven't found what I am looking for (not helped by the pretty ordinary interface of this forum).
]And no, I'm not that interested in hearing "Macs rule, PCs suck"-type responses. This is probably more a question of "desktop with internal drives v. laptop with external drives", but if I am ever going to swap platforms now is probably the time, and I may as well provide all relevant information.
More info if necessary ...
I have a nine month old PC desktop that I use for LR, browsing, email, etc. 1.8GHz, 2GB RAM, 2x 320GB 7200rpm drives (one dedicated to photos and LR database), running XP Pro SP2, hooked up to a 22" Philips CRT.
I have a 25000-odd photo LR catalogue, with another 15000 photos waiting to be added.
If I get a MacBook I envisage mothballing the PC (too hard trying to keep two different computers in sync, let alone trying to constantly swap between two different OS's).
I would likely get the 2Ghz base model, immediately upgrade the RAM to 4GB, and replace the HDD with a 320GB model (all up cost about the same as the new mid-range model). I am keen to limit costs, and as the MacBook will simply sit on my desk, plugged into my existing CRT, for 98% of the time I don't think I can justify a MacBook Pro.
If the consensus is that purchasing a MacBook as a sole computer isn't such a good idea, then I'll probably get a cheap Dell laptop, with XP, for the few occasions I need the portability, and keep my existing desktop as my primary computer.
Is this a no-brainer, or is my caution justified?
Thanks in advance.

Thanks to all who didn't get too sidetracked for your help ;-)
I am currently typing this on my brand spanking new 2.4GB MBP*, ready to be hooked up to my twelve month old 22" CRT when I start using Lightroom with it. Yet to buy any external drives, but on the basis of what I read here, and a bit more fishing around on the web, I'm almost certainly going to go down the 3 1/2" route, using a physical cable connection.
Now just juggling (and comments certainly appreciated):
1)what connection? And user experience with USB2 v FW400 v FW800 (v ethernet v wireless v eSata)? USB2 drives seem considerably cheaper than FW, for real-world negligible differences. BUt haven't read, or at least recalled, any LR users comments on this
2) what capacity for secondary backup drive if employing Time Machine? (How much capacity over the actual space you might otherwise expect to fill in 12 months)
* After looking further into the Australian taxation system and the bids on 12 month-old second-hand MacBooks and MacBook Pros on eBay the decision to buy a Mac was pretty much made for me - I think I will be able to replace a MBP every year for small loss or even a gain for as long as the current system remains in place, and a considerable amount of the population remain ignorant of the taxation incentives to buy laptops.

Replacing WLC 4404 with 5508

Hi Friends,
I am new to Cisco wireless and would appreicate any help with replacing WLC 4404 with 5508. I mean any link or doc (best practices).
Thansk,
Nav
[email protected]

Yup, what said Scoot said .. Add the 5508 to the aps high availability. If you have WCS/NCS you can push this to the APs.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Connecting 3560 with Dell 6248 for Storage Migration

I am looking at an old test and dev virtual infrastructure configuration that was set up with a 1GB Linksys Switch and a Dell 6248 Switch (attached pic is a representation).
The reason given for the Linksys in the config is it was the only 1GB switch available at the time when the SAN had to be installed and there were no more available ports on the 6248.Running Dell Dpack reports show latency issues when migrating from an EqualLogic Volume to a MD3200 volume and from the MD3200 to Md3200 volumes (on the order of 30-45 minutes for a 20GB VM). Migrating from EqualLogic volumes to EqualLogic volumes is in seconds.
I think the Linksys is the issue as does our Dell reps. We are looking at replacing the Linksys with a Cisco or another L2/L3.
I have a Cisco 3560 installed but am not familiar with configuration. I downloaded the Cisco Network Assistant (CNA) in order to configure the switch into the environment via a web browser. As noted in the infrastructure pic, the SAN traffic is isolated to VLAN 10 on the Dell Switch. In the second pic, I show the CNA and I am setting up a VLAN 10 on the Cisco switch and then want to connect the Md3200 to the Cisco which will be connected to VLAN 10 on the Dell Switch for access to an EqualLogic SAN
I am not sure I have the correct menu setting in the CNA for setting up VLAN 10 or if this is the best option?
Any help would be appreciated.
Thanks

Hi,
I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
I never had issues using the current Dell PE package for MDT.
At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
and all my systems mentioned abobe have no issues connecting to the deployment share.
(btw: I have also some older E6400, E6410 and O390 I do no longer support, they
are supported by the pack Dell-WinPE-Drivers-A05.CAB according
to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
I'd
suggest you start over with your deplyoment share using at least MDT2012 Update 1.
Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
When configuring the Windows PE settings of your deployment share select "PE
Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives.

I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

I'll go down your list one by one.
1. Access mail - which I know that the iPad can do.
Enough said.
2. Save an excel or word or ppt of PDF attachment for review.
You can view these types of documents natively on the iPad as Tgara has mentioned.
3. Open an review and maybe change a excel or word file.
There are many apps that allow this. I personally prefer Apples iWork programs, Pages, Numbers, Keynote. They tightly integrate with iCloud.
4. Resave such above files.
With Pages, Number, Keynote you can save/resave files in iCloud and locally. Also you could use dropbox to save your files on dropbox and provide a way for you to share a folder with coworkers/family and they can add/view/review files from there and you can see the changes on your device.
5. Reply to a mail attaching a file.
This is possible in many ways. From dropbox, or another app you can email files with the share button.
6. Be able to rename files and store them in specific folders.
This goes back to dropbox/iCloud. iOS doesn't really have a traditional file system. If you save a PDF it isn't saved anywhere you can just open it. You would have to open an app that supports view PDFs and select the PDF you wish to view. The same goes for documents, spreadsheets and etc.
Hopefully this helps answer your questions.

The demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.

the demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.
your recommended second option that i could add true/false case.
this true/false case must be inside the for loop or outside the for loop?if this case is inside the for
loop, how can i send stop command from outer while
loop?
more over do you have any example for this please?
thanks"

You can execute a fixed number of iterations using a while loop by comparing the iteration count to the number of iterations you want and wiring the output of that comparison (e.g. Less Than or Equal To) to the continue (or stop) terminal of your while loop. Which comparison you use depends on personal preference, where you wire the desired count and the interation count, and whether you're using the while loop as Continue if True or Stop if True.
Ben gave you step-by-step instructions in response to your previous question. Look here for Ben's response.
Ben's response looks pretty good and detailed to me. It certa
inly deserved better than a 1-star rating.

Replacement of logic. If forgot to add the wee battery

Okay,
imac 21.5 mid 2010. Replaced the logic board but forgot to add the little battery. Does that remove the settings?? as I do have the shims sounding and into a white screen, but what comes up now is a little gray box with a question mark inside the box. is on and off.
John

I then removed the logic board again and added the battery. But as I seen this square grey box flashing that has a question make inside it. So I after I added the wee battery I booted the iMac up again and now that same box is there flashing away. about the same as size 10 smoke packet. Have I stuffed it as even holding down the OPTION button nothing happens just keep flashing. No apple logo or gear wheel showing.
thanks
John

ICal: email alarm creation fails with error "You must add your own card..."

When I try to set an email alarm in an event in iCal, it gives an error that "You must add your own card and email address in Address Book to be able to use mail alarms." But I do have such a card in my Address book. E.g., I can use the "Go to my card" command from the Card menu in Address Book. I even exported then deleted my entry and reimported it and marked it as my card again and still iCal will not set a mail alarm for any events. I've also tried setting other cards to be "my card" and iCal still hates me. Help! I need this feature and used this all the time before it broke early this week.
Is there a way to rebuild my Address Book or something?

OK, I finally fixed it. I told Dot Mac to replace all contacts on my computer with the synchronized stuff out on the cloud. I don't know what someone would do if they didn't synchronize -- maybe it wouldn't have happened to them. Anyhow, replacing my contacts with the stuff from Dot Mac or Mobile Me or whatever Apple is calling it now worked.

Replace ipad mini with a newer version

I got my 2nd ipad mini replacement from apple service center here in the Philippines last January 31, 2014. Technically this is my 3rd ipad mini (from the 1st that i bought to the 1st and 2nd replacement). After two weeks of use i noticed that it has also the same defects as with my 1st ipad mini replacement. (What is the odd of having 3 defective ipad minis?!) Apple service center here replace defective ipad mini with brand new one instead of repairing the product if and only if the defects is caused by hardware problems. I am planning to take this back to apple service center. My question is, is it possible to replace my ipad mini with the newer version? (i am very sure that they will still replace this with a new one.) Their price difference is just about Php5,000. I can just add for their price difference.

let's say i have an asset which is a Photoshop file,
filename "v1". i want to replace the asset with a
newer version of the Photoshop file, filename "v2".
how do i replace the "v1" asset with the "v2" asset,
so that all instances of "v1" in the project are
changed to "v2"?
thank you.
rev B 20"
iMac G5 Mac OS X (10.4.2)
I usually just write over the file with the same file name, often with DVDSP closed.
If you're doing an m2v file and the duration has changed, just go the the end of the clip in the track and drag it right as far as you can. Otherwise it'll replace the asset but use the previous version's duration.
G5 Dual 2GHz Mac OS X (10.4.4)

Replace 20" ACD with Dell 24 or add Dell 20WFP?

Similar Messages

Maybe you are looking for