Replace 500Gb drive with 2Tb

I need to increase the Hard Drive on an IMac. Is there a method in which the new drive could be connected externally, and mirror the existing drives contents? Or is it only possible to use Time Machine to another system, then do a restore once the new drive is installed?

Better be sure it will be compatible to install in the late 2009 iMac.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
Despite what OWC says, best information I have is that the Seagates have a proprietary Apple firnware. The sensor cable connects to the jumper block. These drives are not found anywhere after-market.
As for any of the WD drives, I'm right in the middle of trying to get some reliable information on that. I've been hearing some very contradictory, confusing things from WD Level 2 tech support.
I don't know how skilled you are, but without experience these Macs can be very dicey to open up. Fragile connectors etc.

Similar Messages

I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
Thanks

Upgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

MacBook shows only folder with ?. Replaced hard drive with same results.

In the midst of some work the machine simply clicked and showed a folder with a ?. Would not restart. Replaced the drive with a new 7200 Seagate momemtum, 320GB, installed the software, and have the same problem with startup. A folder with a ? Connect another machine via firewire and looked at the MacBook drive and it showed the appropriate system folders. Then started the other computer from the MacBooks hard drive and that worked. So the drive appears healthy but we cannot get it started on its own. In Disk Utility the new drive is indicated as not owner enabled, whatever that means. It appears most Macs that work are, in fact, owner enabled. Anybody have a clue what might be going on here? We're thinking maybe the first drive had not failed and the problem lies elsewhere.

As an FYI, here is the apparent solution. The original drive did fail. Because the disks were in Seattle and we were attempting to fix it in Dallas we connected via Firewire to a PowerPC machine and formatted the drive. That was the crucial error. the G4 did not give the appropriate Intel-based Mac formatting options. So we could look at the drive from the G4 and see everything was there, but the MacBook could not boot itself because it could not read the disk which was improperly formatted. The Genius bar in Seattle figured this out and reformatted the disk at no cost.
All's well that ends well, but have Macs really become that complicated?

Replacing super drive with SSD

Hi everyone,
My iMac is getting old (2.8GHz Core 2 Duo).
I'm thinking to replace a super drive with 240GB SSD (will install OS and Apps). I will still use my internal SATA drive for data and files.
240GB SSD > OS and Applications
500GB SATA > all data and files
I'd like to know if I get significant speed advantage??? Anybody has similar configuration? How is it? Is it worth to do?
Also I'm thinking to upgrade my MBP same way..
Thanks!

Well first off it voids your AppleCare/warranty as a unauthorized change, but if you don't care then most have preferred placing the SSD where the hard drive is and moving the hard drive to where the Superdrive is, placing the Superdrive in a external encloses.
SSD made to be the boot/OS/applications/bare bone user drive for speed and the hard drive for large storage (as SSD's can wear out)
You won't be able to boot off the external Superdrive or install Windows from it according to reports I read.
If you contact Bmer art MacOwnersSupportGroup
http://macosg.com/
He has a lot of experience and did it himself so he can teach you how it's done, the best SSD to use, cloning your drive and so forth.
http://www.mcetech.com/optibay/
http://www.harddrivebenchmark.net/high_end_drives.html

Can I replace hard drive with Time Machine backup?

I couldn't phrase this right to see if some already asked. I have MacBook with a 250gb HDD and I have a new 500gb HDD. I bought a USB Hard Drive enclosure and have been backing up with Time Machine. So my question is, can I take out my 250gb HDD and put in my Time Machine Backed Up 500gb, and boot up like normal? Or are there some steps I need to do?

No, you cannot do what you've asked.
What you can do is this.
1) using your install DVDs or an install USB, install OSX on the external 500GB drive. When setup assistant starts, point it to your 250GB drive so all your settings and files get migrated over.
2) now you can swap drives and it should work. Have your install USB handy incase something goes wrong. Put the 250GB drive in your external enclosure so you can access it if needed for a reinstall.
good luck

How do I replace my drive with an SSD drive?

Hey guys, I have an early 2009 iMac 21" and was curious about replacing the hard drive with a 120gb SSD drive. Will I find it problematic that the SSD is 2.5" nd the original drive is 3.5"?
How would I get around this? I know how to replace it, just don't know exactly what to do for the size.
I will be using this:
http://www.amazon.com/SanDisk-Extreme-Gb-s2-5-Inch-Solid-SDSSDX-120G-G25/dp/B006 EKJCWM/ref=sr_1_4?ie=UTF8&qid=1383680505&sr=8-4&keywords=ssd+120gb
Thanks guys!

It can be used although you may need to jury-rig a mount.
I would not use SanDisk. Stick to OCZ Vertex 2 or OWC Mercury 3G.

Replacing combo drive with super drive

I think my iMac G5 needs a new optical drive, because I frequently get the error "failed to calibrate the laser power" when trying to burn from iTunes. (Yes, I've tried all the usual remedies: Different media, cleaning the lens, changing the burn rate... The Apple store genius say they see this "a lot," and it's probably the drive.)
My G5 has its original combo drive, but I've never burned a DVD and don't expect to with this machine. So my question is: Would there be any problem in replacing the combo with a super drive? Would the OS be able to "recognize" the different device and adjust for any differences?

You're right -- I had super and combo reversed. (Actually, the website I was looking at when I posted had them reversed.) I currently have the super drive (MATSHITA DVD-R UJ-845) that came with the iMac.
I can get an Apple combo drive replacement for $95 or a super for $145. There will not be any labor cost. So what I'm considering is replacing the super with a combo. I'm set on keeping it internal. My only concern would be that the change might cause some sort of system errors.

Replace Combo Drive with Superdrive

2 years ago I bought this Pbook G4 with Combo Drive. Then, during "our" journey, I found out that this Combo Drive was not quite satisfied me. So I have plan to upgrade/replace the Combo Drive to Superdrive.
My question: is it worth to replace my old Combo Drive with Superdrive? And do you know how much does it cost? Including labor?
Many thanks.

Ok, thank you for the infos.
It'll cost me Rp. 2,5 million plus Rp. 200 thousand (labor) for trading my old combo drive with new superdrive. It's a little bit expensive here.
I live on Jakarta, Indonesia.
Note:
Rupiah=Indonesian Currency
US$1=Rp. 9.000 (more/less)

Replace dvd drive with SSD

I am thinking about removing the dvd drive in my macbook pro 15" and putting in a SSD drive. Then create a fusion drive using both the existing harddrive and the new ssd.
What is recomended?
1) Swapping the hd to the dvd and putting the ssd in the existing hds place.
2) Or just replace the ssd with the dvd-drive? Leaving the HD where its at.

MacBook Pro's, for some reason, like the boot drive in the 'original' HD location. I have no idea if this would be the case with a DIY 'fusion' drive, however.
You may want to actually call OWC to see what they recommend (and, if you're going to replace the optical drive, you simply can't so better than the OWC Data Doubler)...
Good luck,
Clinton

Gt70 - replacing ssd drives with bigger, faster ones

I have a new GT70, with a pair of SSD drives in it. Sitting in a box at home, I have a pair of kingston 250gb SSD drives.
I'd like to replace the two 64GB ones with the bigger ones.
Does burnrecovery do a file backup? Or does it image the drives? I need to find a backup/restore utility that will let me replace these drives and restore in such a way that I can see and make use of all of the new space. I'm pretty sure an image based utility won't let me do that.
Any thoughts? If anyone has already done this and is willing to share their experience I'd greatly appreciate it.
BTW this laptop is a BEAST! Love it! I can run Skyrim with gfx all the way up and get a rock solid 60fps. Pretty sure if I could figure out how to turn off vsync I could get better than that even.
kerb

Well.....let me make a few recommendations.....
First off, don't set it up for maximum file space. Why? Your performance will suck incredibly if you ever get it more than 75% filled. This has been proven especially on Anandtech's website. Their latest review of the Crucial M500 uses a new method of benchmarking showing how if you actually leave about 20 to 25% of the drive un-partitioned, the performance decrease is MUCH less than normal.
So, that being said, I would use whatever software MSI had included (Burn Recovery comes to mind) and make a backup. This is what I first did when I got my GT70.
Then, also go ahead and save any other data you would want saved from your SSD's (My Documents, Favorites, save games, etc...).
I would then replace the SSD's.
Use the Intel Raid ROM to setup the SSD's in a Raid 0 configuration.
Boot using the recovery software you created up above. Install Windows, etc....
That's essentially what I did with my GT70, except mine only came with a single 128 GB SSD. I replaced it with 2x240 GB Mushkin drives. I only formatted the drives for 390 GB, instead of the full 460GB or so because I don't want performance to suffer as time goes on.
Currently, it's running like a champ, and hasn't really changed performance wise since I installed them.

Replacing optical drive with SSD and HD with new HD

Hi folks, recently my macbook pro unibody's (2011) hard drive started encountering some fatal errors. I've gone through all possible fixes, and it looks like the only option left is to replace the HDD. As much as this initially bummed me out, I'm a little excited about the prospect now. I think I would like to go ahead and replace the optical drive with a SSD while I have the computer open to replace the HDD. This will breathe some serious new life into my macbook pro.
My question is, which SSD's and HDD's are compatible with the macbook and which brands do you guys (the community) recommend? Should I upgrade my ram while I'm in there? How difficult of a job is this? I am mechanically inclined but I have much more experience working on tractors than electronics. Thanks for any advice or input you can offer!

Go to OWC to get the Data Doubler bracket for your model. You can also find HDDs and SSDs there. Be sure to put the SSD where the HDD is located and put the HDD in the optical drive bay. Upgrading RAM is always a good idea. I've done all these in my 2011 MBP. OWC also provides tools needed and online video tutorials.
For optimum use of this combo only install OS X on the SSD. Install everything else on the HDD. Then follow these instructions for setting it up to have the computer boot from the SSD but use your Home folder that is on the HDD:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.
Be sure to use Trim Enabler 3.3 to activate TRIM on the SSD.

Want to replace DVD drive with second HDD on Probook 6570b regarding to setting BIOS

After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
This question was solved.
View Solution.

Berislav wrote:
After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
Hi,
Check the boot priority in the BIOS. Make sure that DVD is not the first boot option. It looks like when you swapped the DVD for the hard drive it won't skip boot from DVD to the primary hard drive and stays on the DVD option but the DVD ROM is not there anymore and it finds the new hard drive. However, the operating system is on the primary hard drive which is a different boot option. It finds the new hard drive but because the OS is not there it says no bootloader because the bootloader is on a different hard drive.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Best way to replace hard drive with Time Machine

Hello, I searched dozens of threads before posting but I didn't find my specific topic.
I have a G5 (single CPU) with two internal hard drives plus one external drive. The original hard drive is only 80gb and it has been quite full for several years now. I purchased a second internal drive (150gb) about 3 or 4 years ago and have been storing all my files video and data files on the second drive. This created some additional space on the primary drive, but not much. I started off with OX 10.1 back in 2003 and have purchased the upgrades all the way to OX 10.5.4. I also have about 14000 photos in iPhoto that are stored on the primary drive because I can't figure out how to move my library to the second drive (where there is more space).
About a year ago, I purchased an iomega 500gb external drive (USB 2.0) that runs Time Machine.
I have not had any issues with any of the drives except for running out of space on the main drive. I accidentally deleted some of my wife's files once and used Time Machine as advertised.
My main drive has 4.7gb free
My second drive has 87gb free
My Time Machine drive has 205gb free.
I purchased a new 500gb internal drive.
I think my G5 will only take 2 internal drives total, so the original 80gb drive needs to go. How do I accomplish this? Should I make my 150gb the main drive, since it will be the smallest and therefore maybe the fastest for running the OS? If size of the drive doesn't matter, then should I just remove the 80gb drive, install the new 500gb in it's place and then boot using the OS X10.5 disk?
I suppose I could just let Time Machine restore the system, but do I really want OS X10.1 with a bunch of upgrades? It looks like my OS X 10.5 disk is a full version (it doesn't say 'upgrade only') on the box... Wouldn't my computer run better with a fresh OS X install and if so, is there a way to let Time Machine re-install my apps and user settings? I think I am running iLife 06 (which ever one has iMovieHD...) I also have Final Cut Express HD, CorelDraw suite and NeoOffice. Everything else is how the computer came back in 2003. I've never had any issues, so I am more than a little concerned that I am going to mess something up. You know that saying...."If it ain't broke....'
Any advice?
Regards

You do indeed have only two internal drive slots in your G5. To avoid having to try restoring everything from your TM backup what you could do is to be sure you force a final TM backup of the 80 GB drive before removing it. Install the new drive. Prepare the new drive - I suggest the following:
Extended Hard Drive Preparation
1. Boot from your Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion of formatting quit DU and return to the installer. Now complete your installation of OS X. During this process you will be asked if you want to do a full restore from a TM backup. Skip this option. Once the installation has completed the computer will restart. After restarting you will see the Setup Assistant. When you've completed the Setup Assistant you will be given the option to migrate from a connected TM backup drive. Select this option. You can then migrate your Home folder, applications, and preferences. There is only one important caveat to this. When completing the setup you are asked to provide a username and password for the startup admin account. Do not use the same username as the Home folder you will migrate. Select a different username (short name is what it is also called.)
Once the migration has completed you can log out of the startup admin account and log into the migrated account. You can then delete the startup account unless you choose to keep it around for test purposes.
This process will not restore anything else from your backup except the Home folder, applications, and preferences. If there are items in your Home folder you would prefer not to migrate, then move them to the other hard drive.

Replacing optical drive with a hard drive in a MBP

Hello... Just ordered a new 15" MBP 2.2GHz with the 128GB SSD to replace my 13" MBP. I was thinking about just using a cheap external HD until one that can take advantage of the Thunderbolt port comes out and then I heard about the MCE OptiBay Hard Drive kit. If you haven't heard about it, the kit is basically a bracket that allows you to mount a HD where the optical drive is installed. You can then install the optical drive in an external enclosure and connect via USB on an as needed basis.
Has anyone had any experience with this? And, more importantly, does it void the Apple warranty? If it's allowable, any reco's on an internal drive?
If installing does void the warranty, any suggestions on a reliable (but inexpensive) external drive? Been trying to find one that utilizes the Firewire 800 port but not a whole lot to choose from... will FW800 make enough of a difference to justify the extra cost?
Thanks, Kevin

Hello again!
Will boot natively into Win from time to time but noticed you used Parallels and were able to access the Win 7 VM very quickly! Must say I was pretty excited to see that (as it is painfully slow on my current MBP). You're running 8GB of RAM, correct?
Plan on using Win VM often and primarily because of one program... MS OneNote. Use it often and am annoyed that it is not available in Office for the Mac!
Re Audi... Have you heard about or seen spy photos of the new RS4 Avante? Gorgeous car but it will never come to the US. You guys get all the nice cars. BTW, did Euro delivery on my 540 and can't bare to part with it as I still have less than 100k miles on it... Well and then I'd have to change my email alias. Though pkh-m5 has a nice ring to it!
Cheers, Kevin

Replace 500Gb drive with 2Tb

Similar Messages

Maybe you are looking for