Replace a paragraph format with another in the every page

I am doing some cleanup before exporting and I don't know much about FrameMaker....
I want to replace the paragraph format ABC with XYZ in every page, how would I do this?
I also have a paragraph format I want to delete and make it just a Normal paragraph in every page, I image it will be the same process as 1?
Your help is appreciated

Try this …
make a back-up just in case
find a paragraph with the style you want to apply (XYZ, in your example)
select Edit > Copy special > Paragraph formatthis copies the format to the clipboard
open the Find/Change dialogue
put the cursor in a paragraph using the format you want to replace (ABC in your example) and select Paragraph tag from the Find pulldownif you're in luck, FM may well read the current format from the cursor position; if not, type it in
select By pasting from the the Change pulldown
click [Change] to see whether the result is what you expect
click [Change all] once you're feeling confident
Use the same technique to replace all occurrences of the style you want to delete (PQR, f'r instance) with another style, then delete PQR using the paragraph designer

Similar Messages

Susbtitution Variables in rules file to replace a member name with another

Hi everybody,
Can I use substitution variables to replace a member name with another name in rules file?
Please let me know if we can use substitution vars.
Essbase version :11.1.2
Thanks,
K.as

Are you the same guy?
http://www.network54.com/Forum/58296/thread/1287447433/Susbtitution+Variables+in+rules+file+to+replace+a+member+name+with+another+name
The answer is still, "No".
Regards,
Cameron Lackpour

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Replace one itunes account with another

I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.

Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2

How to replace a particular striing with another string in jtextpane

how to get replace a particular string with another string of a jtextpane without taking the text in a variable using getText() method .

Thanks for your answer,
"relevant object" means for you datasources, transfer rules and transformations ?
With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
Will I have to pick all object one by one ?
What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
Regards
Guillaume P.

Replace one preset effect with another

Is it possible to replace one preset effect with another withouth having to undo a prior preset effect?
When I used Aperture, holding down the Option key would allow me to replace one preset with another.

Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2

Clearing paragraph formatting with Ctrl-0

This is a FYI.
I've always cleared paragraph formatting with Ctrl-0, but it doesn't seem to work anymore (PC, Dreamweaver CC 2014.1). Ctrl-0 is still set in the keyboards shortcuts to set paragraph formatting to 'None,' but it just doesn't work. I tried changing the shortcut to something else and it worked fine. I then tried changing it back to Ctrl-0 and it said it was already assigned to '100% view.' So I found that shortcut, cleared it, and then assigned Ctrl-0 to Clear Paragraph Formatting and all is good now.
G

Sounds like they probably changed some keyboard shortcuts to mimic browser shortcuts.
Good to know.

I am trying to print keynote slides in handout format with notes. The notes cutoff. Is there a solution to this problem?

I am trying to print keynote slides in handout format with notes. The notes are cut-off. Is there a solution to this problem?

You can also turn off the automatic capitalization if you find it gets in the way too often:
Settings -> Keyboard -> Auto-Capitalization
Regards.

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

Display Doc ID with Link to the Property page in SharePoint 2010

Good Morning.
I have been asked to add the DocID to the search results. Part two is to have that docID link to the property page for the item.
I have added DocID to fetched property's and can display it fine on the page but I am having problems creating the link to the property pages.
can anyone help?
So far I am trying to do this in the searchcoreresults XSL.
I would like the format of the DOCID to appear like this.
[ DOCID ] with the Hyperlink to take you to the item property's page.
thank you.

Hi,
According to your post, my understanding is that you wanted to display Doc ID with Link to the Property page in SharePoint 2010.
SharePoint indexes Document IDs as a managed property by default, which means that with a little magic, we can add the Document ID into the search results.
We need to modify the XSL so that we display the Document ID in the search results.
Here is a great article for your reference:
SharePoint 2010–Returning Document ID in Search Results
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

I had two files named graphics and I replaced one graphics file with another which was the wrong one. Can I undo my replacement? I move the wrong one, which was on my desktop into another one and that is when it as me if I wanted to replace the file.

I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?

Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.

Replace one swf movie with another

I have a flash movie on my web page and I have made some of
the text inside the movie into buttons. The movie only takes up a
portion of the page. I would like to replace the movie with another
movie when somebody clicks the button.
I'm sorry if this is a really basic question but I have spent
ages trying to find out how to do it and I keep getting an error
when I try to search this forum.
Thanks for your help.

Thanks for your help so far. I seem to be having more and
more trouble though!
I have a swf file (sunnyserv.swf) that contains a pre-loader
and then opens another swf file (downturn.swf). The downturn.swf
contains the buttons that I want to listen to, and swap out the
movies.
If I open sunnyserv.fla in flash and test the movie, it loads
downturn.swf, listens to the mouse click and runs the
communication.swf movie (although it doesn't clear all of the
children from downturn.swf).
However, if I export all three movies and open my web page
nothing happens! If I change the xhtml to load downturn.swf that
works ok. Any idea why it would work in test movie but not when
loaded into an xhtml page?
Also, can you see a reason why all of the children are not
being removed in the commClickHandler function?
Code below:
sunnyserv.swf (container)
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,
loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("downturn.swf"));
function loop(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
percent.text = Math.ceil(perc*100).toString();
function done(e:Event):void
addChild(l);
removeChildAt(0);
percent = null;
downturn.swf
import flash.events.MouseEvent;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
var l:Loader = new Loader();
// add listeners for each button
btn_communication.addEventListener(MouseEvent.CLICK,
commClickHandler);
function commClickHandler(event:MouseEvent):void {
for(var i:int = 0; i < numChildren; i++){
removeChildAt(i);
l.load(new URLRequest("communication.swf"));
addChild(l);
stop();
Hope somebody can help!

I want to replace a MS-7646M1 with another MSI motherboard

Hello,
I want to replace my MS-7646M1 (Medion) motherboard with another MSI motherboard, does someone knows the best replacement with te same connectors (front panel)?
Manual of the motherboard: http://www.medionowners.be/downloads/0MB_MS7646%5B1%5D.pdf
Thanks
KingWolf

If you're using the existing case, then any MSI m-ATX Socket AM3 board will fit, and you should be able to use your existing CPU and RAM. But be warned, these Medion PCs usually come with junk PSUs, so you may want to replace that also.
Better to just buy a new case, then you can use any size board and PSU you like.

Is it possible to replace a failed drive with another unused hard drive within an ix12-300r

I have an ix12-300r with a failed drive in a storage pool - I want to replace the failed drive with one of the other drives in the NAS that are unused (i.e. not part of any other storage pool)
i.e. Storage Pool consists of 3 drives - disk 1, disk 2 and disk 3.
Disk 3 has failed.
Disk 4 is free and not used by any other storage pool.
Can Disk 4 be pulled out and then put into the place of Disk 3?
(All disks are the same model/size/speed)

Hello cayliffe
Yes! In you case disk 4 would be usable as a replacement for disk 3.
You can remove disk 4 and put it in bay 3 if you wish, however you should be able to set the ix12 to use unused drives as hot spares so the firmware switches to the disk automatically. In Drive Management > Settings the "Use available drives as hot spares" option will allow your device to use any compatible unused/available disk as a hot spare for any of the storage pools.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Replace a paragraph format with another in the every page

Similar Messages

Maybe you are looking for