Replace audio with separately recorded audio and sink it with video and original audio

I have recorded the audion with a high quality digital recorder.  How do I replace the audion taken with my video camera?  and make sure it is in sink with the video.

Once you have followed Steve's steps, to adjust the sync perfectly, see this article: http://forums.adobe.com/thread/436751?tstart=120
Now, some users have found that their cameras, and their separate audio recorders do not sync 100%. With today's technology, they certainly should, but camera and recorder companies do not see to care, so leave the task to the editor. One user found that his Zoom recorder was about 0.06% slower than his Panasonic cameras, by trial and error, and critical listening. This was a constant sync error. To correct, he changes the speed of the Audio 1.04%, with Maintain Pitch checked - then it is always perfect. If you find that you cannot maintain perfect sync, explore speed settings for the Audio. If the recorder is a high-quality, the OOS (Out Of Sync) should be constant, and when you find the correction, it should be the same for all projects, so the trial and error should pay dividends.
Good luck,
Hunt

Similar Messages

  • How To Replace Text With video?

    Hi,
    I purchased this template for AE http://videohive.net/item/commercial-plan/109232
    Everything is fine except importing video into it.
    If you take a look at the video preview, there is an option to place 4 images/videos in the template. However, when I tried to import video, it does not show up. I tried right clicking on the asset panel and then replacing the existing file with my video. No luck.
    The video I tried to import is MP4 Video (in .m4v format).
    Also the MP3 file I tried to import does not play in the file after rendering.
    Any idea why this is happening?
    Thank you.

    What version of AE do you have. Earlier versions had problems with MP4 video. It's always best to transcode highly compressed sources before you start manipulating video.
    Somewhere in that template there's place holder video or a place holder layer. You must find the original footage layer not the pre-comp, not the nested comp. Once there all you have to do is select that place holder layer in the timeline then select your new video in the Project Panel and hold down the Alt/Option key and drag to the timeline. The footage will be replaced.

  • Replacing audio track with and synching with separate recording

    Hello,
    I've read everything I can find, including numerous websites, the help file, and a book, but can't find this answer with step by step instructions using Premiere Elements 9.
    I have the trial version, and will purchase once I figure this out. I only need to make Youtube videos with a separately recorded audio file replacing the audio that is already on the video. in other words,  I have a separate Mp3 audio file of the same audio performance using an audio recorder and I want to replace the audio on the original video with the other Mp3.
    What are the steps involved to make sure the new audio is in synch with the audio already on the video, beginning with the original recordings and working through to the finished product?
    Thank you.

    Hunt, I hope I didn't seem dismissive of Steve's book - I did think it was very good and am glad I purchased it. I just wasn't able to figure out the answer based on what was in it.
    I did not take your comment as dismissive in any way, and highly doubt that Steve did either. I do not have his newer version book, but only some older ones, or I would have grabbed it and checked to see if he DID cover this material in it, just maybe buried in another topic. My comments were pure speculation, as what you are doing is not "mainstream," though is becoming more so monthly.
    For my PrPro (slightly older version), I have the printed manual (yes, they used to do those), the Adobe Classroom in a Book, plus several other volumes dedicated to it, and even the print-out of the Help File PDF. Still, I, and other users are always coming up with some use, that is not covered anywhere!
    One of the recent changes to the Help File in many Adobe programs, is that it is now a live On-line document, and there are engineers, who do little but update and add to that. This was almost impossible with printed material (though I still have my old ring-binder for the original WordPerfect, and monthly, they used to send me new pages to either add, or replace - long time ago).
    When I am working in the forums, I usually have the particular program open and in front of me, as I am always coming up against questions, thinking, "wow, I would never have thought of doing that," and having to duplicate the actions that a poster outlines, or experimenting to find if what they want is possible. Often, when I do one of the experiments successfully, I'll add an article on doing it, to the Tips & Tricks sub-forum here. One example of that was "Fading a Title Crawl," which turned out to be both fun, and relatively easy, when I got into the experiments.
    I have a stong feeling that Steve will have a bit more "music video" instruction in his next PrE book, as it is becoming more popular, as evidenced by the number of posts that we are seeing lately. More folk are doing that. Same thing for shooting with what were considered non-standard cameras, just a few years ago, like various smartphones.
    Good luck, and happy editing,
    Hunt

  • Replacing camera audio with production audio (separately recorded)

    Hello,
    I'm halfway through an edit for a client, and they'd like to replace the camera audio with their separately recorded audio files. Unfortunately, the time code of these audio files doesn't match the video, so I'm going to have to sync each master clip using slates.
    The thing is, this project has a ton of cuts. It's one thing to sync up each shot using slates, but it's entirely another matter to manually sync each individual cut, as a given shot might have four or five jump cuts within it.
    How do I replace the audio in my master media files such that my timeline (current edit) utilizes the synced master files?
    thanks

    You could close your current project.
    Create a new project.
    Import all your video files that need audio replaced.
    Import the new audio files.
    Put each video track onto the timeline, alter timeline tc to match the original file, and sync new audio to them.
    Export each one as a new file, in a new folder, with the same name as the original.
    Close project.
    Move original files to a new location, or put them on an external drive and take it offline.
    Open original project and reconnect to the new files.

  • Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
    Any help would be appreciated
    BTW
    Ive tried all the system sound prefs, and garage band drivers. Back and forth.
    cheers
    ds

  • How to replace audio on a music video with final cut pro x

    How do I replace low quality audio on a music video to a higher better quality audio with final cut pro x?
    I have the new audio on cd which I can rip and replace the original audio.
    Some audio and music videos are not of same length, In cases like this how do I sync video to the newly replaced audio?
    Is there any tutorial, link or where to look for this in the manual?
    Any help will be very much appreciated.
    Thank you in advance.

    Providing you don't need the video synced or cut to a beat, all you need to do is place your music in the primary storyline
    Connect your video above.
    While your video is connected, hit CMD+R on your keyboard and stretch the video to the length of the music
    If you were to cut the video to a beat, simply add markers on your music track, then connect and trim clips to your markers.

  • Is it possible to Replace audio in a video without re-importing and re-exporting ?

    Hi..
    i have exported a video of 2 hours length..  Then i just feel i need to replace the audio with another audio file which has small tweaks in it..  Can i replace the audio in the video i exported without having to reimport the video into fcpx and re-exporting ??
    can i do this ? is there a way to replace audio ? any external apps available ?
    Do let me know.. Thank you !
    Regards,
    Arun Kanth

    If you're set against reimporting/exporting: Quick Time Pro should accomplish what you're trying to do. It's a $29 license, but is much more useful than QTX and is a tool worth having if you don't already/
    http://re-sounding.com/2012/01/05/replacing-audio-track-qt/
    Russ

  • No audio with video recordered by camera

    Hello!
    I have problem with recording a video by camera, there is no audio or any clear sound for the video i have recorded!!
    Help please!

    Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
    In what way is the navigation not working properly?
    Can you give some examples?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Render and Replace Audio

    I've got a whole stack of individual audio clips all on the same audio line/channel on the timeline which I now need to - Clip > Audio Options > Render And Replace. Can I apply render and replace to all the audio clips on the specific audio line at the one time. This would save me some time. I only need assistance, if you want to dribble on or bless me with a superior complex, save yourself the time and go write on some one else's thread.

    D'oh,
    Figured it myself! 5 minutes later - To select multiple clips by clicking, use the Selection tool and Shift‑click each clip you want to select. Then it's Clip > Audio Options > Render And Replace.

  • PVC2300 recorded audio is not sync with video

    Hi all,
    I have a big big problem with my new PVC2300 network camera:
    when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
    I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
    For my usage this is a very big isssue... I hope there is a way to fix it.
    Thanks in advice
    Robert

    I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
    The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
    But this mode have a lot of problems (.asf  format, large file size and continuos recording without the ability to start and stop the recordings).
    I think that the desync is a bug (a very big bug) of yours activex control  that makes the recording.
    I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
    Ok finnaly the cisco program works, but using it I found another problems:
    after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
    My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface.  I have installed on my system the lastest video codecs (for example: divx etc.).
    For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
    I think these problems are very serious for a product as is this camera.
    I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
    Thanks
    Robert

  • TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

    I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

    I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
    "Video Track: H.264
    Sound Track: Integer (Little Endian)"
    All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • I lost my iphone4 and replaced it with a 4s. It's been a year since my last sync. Do I set up my phone as "new" or "restore from backup?" Im hoping game center will automatically have a current record of game data...please help or advise.thx

    I lost my iphone4 and replaced it with a 4s. It's been a year since my last sync. Do I set up my phone as "new" or "restore from backup?" Im hoping game center will automatically have a current record of game data...please help or advise.thx

    Restore from backup.

  • Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    You may need a 3rd party application to view the DVD in a wWindows format such as
    http://flip4mac-3.en.softonic.com/mac
    https://www.macupdate.com/app/iphone/5758/vlc-media-player

  • Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help?

    Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help? It keeps telling me 'Audio file not found', and seems to be different tracks in the same project each time too.

    iamthewaughrus wrote:
    I also have this problem using Garageband in a school network situation when students open their project on one station, save it to their network drive, and later open it at a different station.  90% of the time there will be no issue, but sometimes audio files are lost. (Garageband '11, iMacs)
    That sounds like it might be a failure of the students to perform a Save As and check Archive Project when they do. This asks GB to pull all the files it needs into the associated .band document rather than point to them externally (and then risk not having them be there).

  • Aim trying to put 2 audio clips together and you can hear the unnatural break. Is there a transition I can insert to cover it. Kind if like we do with video?

    aim trying to put 2 audio clips together and you can hear the unnatural break. Is there a transition I can insert to cover it up. Kind of like we do with video clips? Like an overlay? Thank you

    You could put the two clips on two different tracks with a slide overlap and fade the first clip out out and the second clip in.
    Or trim both clips in a way, that the first clip ens with silence and the second clip starts with silence.

Maybe you are looking for