Replace color range

I have an application where I need to replace a range of red values with a single red value in an HSL image.  I need to replace the values from (1,255,82)-(14,255,127) with (1,255,82).   I imagine this could be done with color thresholding the image but I'm not sure how without losing the other colors or getting an invalid image error.
Chris

In Vision and Motion utilities i found IMAQ RGBToColor2, Check it may help.
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Similar Messages

  • Select- Color Range- Results in Blue Screen (PC)  (driver out of date)

    I've been using the CS6 beta about two days.  While experimenting with color range I experienced two consecutive blue screen crashes.  The first time it happened,I was working with the color range selector and was replacing the selected areas with another color using the paint bucket.  About the third time I attempted this, my PC blue screened.  The second time, I opened a photo, went to Select>Color Range and got an immediate blue screen crash.
    I then went back to CS5 and I've been playing with the same scenario with no apparent problems.
    My PC is a store built computer.  It consists of an MSI 990-FXA GD80 motherboard, an AMD Phenom 1100t CPU, Asus GTX550 Ti graphics card and 8 gig of RAM.  It boots from a 60 gig SSD and my programs reside on a 500 gig hard drive.  The OS is Windows 7 Professional 64 bit.  CS6 is using the hard drive for its scratch disk and Photoshop is using 4339 mb of the 7232 mb of available RAM - I haven't changed that.  I'm running CS6 as administrator because the way it installed, it would only run in that fashion.
    One disappointment during the installation was CS6 made no attempt to read my preferences from the CS5 install.  That may be covered in another post, I've not yet looked.
    Please keep us informed as new betas are released, because I would like some time to work with this puppy before plunking down big bux for the upgrade.  As it is now, I'm going back to CS5.  I get mighty nervous when my super computer blue screens!
    Gerry
    gswetsky AT bellsouth DOT net

    The GPU is often at root of issues like yours. I've had so many problems with Nvidia drivers for their gaming-oriented adapters (like yours) that I finally went with one of their workstation cards. I have a Quadro card with just enough RAM to make Photoshop happy. The workstation drivers are optimized for reliability, the consumer card drivers are optimized for gaming and that often means they're less stable and reliable with Photoshop.

  • How can I create a black and white image similar to what I see in the "Replace Color" tool?

    Hi all, I'm just wondering how I can create a black and white image similar to what I see in the preview window of the "Replace Color" tool. See attached screenshot for clarification -- I need the grass to be black while the soil is white or vice versa. Any tips?

    One way is to use Select>Color Range
    Make a new Color Fill Layer>White
    (Layer>New Fill Layer>Solid Color)
    Put a new color fill layer below>black
    Just invert the layer mask on the top fill layer for the opposite effect.

  • Adobe is charging extra to access full color range of Pantone inks

    I pay the professional fee of nearly $60. per month (in perpetuity, at least till the price goes up) for my Creative Cloud subscription. It takes me months to learn all the new bits and pieces of each new function and revised functions of InDesign, Photoshop, Illustrator, Dreamweaver and Acrobat overtime they update. This is very costly.
    Now, I spent hours trying to assign a Pantone ink color from my Pantone book to a new logo last Sunday only to find I need to pay additional to Adobe to access the new colors in the Pantone books I purchased this year (I loyally replace my books every few years to be sure my colors are accurate). Pantone ink colors are necessary to a print designer's repertoire. I show these colors to clients so they see exactly what they ill be getting. I find it outrageous that Adobe is trying to squeeze yet more money for something that is so essential to professionals that it should be included without extra work or extra money.

    At the bottom of the color range dialog box, there is a drop down menu.  Select "None" rather than grayscale.

  • CS2 - "Clamp" specified colors (aka Replace Colors)

    Hi all,
    I have a non-indexed RGB image that is required to have only very specific colors within it.  I'm trying to write a script that will look for these specific colors within the image and will clamp any pixel color *not* found in the list to the closest match in the list.  I should also mention that we have quite a number of artists using various versions of Photoshop, with the lowest version being CS2.  As a result I'm targetting Photoshop CS2.
    My first attempt was to cycle through all of the pixels one-by-one, pull the color, find the closest match, and set it again.  This was terrifyingly slow to the tune of ~hour or so on a fairly high-res image.
    My next approach was to use ScriptListener and use Select->Color Range to select pixels of a particular color and provide some error using the Fuzziness value.  This sort-of worked, except when I tried to fill the selection the fill was not a solid color as the selection was feathered.  I can't figure out how to set the feathering to 0.0 under CS2   I know I can do the whole Refine Edge on CS3+, but like I said my target is CS2 as we have a few folks still using that version.
    I also played around with Magic Wand, and it theory it does exactly what I want - provides a selection with some provided tolerance which I can then fill with a solid color.  The problem is I seem to be able to only use the magic wand given a target pixel-coordinate (x,y).  Is there a way I can invoke the magic wand given a color instead?  That or use Color Range without feathering?  Or any other better/recommendd solution that would replace a color +- some tolerance with a specified color?
    Thank you in advance --
    Graf

    It does have that option, but that just selects all pixels with the exact (or rather, really close) color.  Instead, I need to select all of the pixels of that color within some margin of error, and then replace all of them with a solid color.  Not particularly useful to me, as the purpose is to find all pixels of a specific color within some tolerance, and select them without any feathering.
    In CS3 I found that I could refine the selection and set the feathering / anti-aliasing / etc to 0, and then fill the entire selection.  That is *exactly* the desired result, but alas no such option exists in CS2.  Alternatively, using the magic-wand with continuity disabled also provides the desired selection, but I can't seem to invoke the tool without providing an X/Y coordinate.

  • Replace color by giving target and replace RGB code

    Greetings,
    Is there a way to replace a color where I supply the target RGB code (let's say 237, 32,36) and the final color that I want to replace (let's say 255, 0,0)?
    I tried the replace color tool but when I do a color droplet I cannot get all the sections where that color is.
    Thanks in advance.

    Select --> Color Range
    Edit --> Fill
    Mylenium

  • Replace Color...mask view?

    Wishlist: I kinda wish I could combine these 3 into one amazing toolbox:
    Replace Color
    Select... Color Range
    Refine Edge
    This would be groundbreaking and game changing over here.

    Personally I consider Replace Color as fairly dispensable as it is a destructive operation.
    But you might want to post in the Feature Request Forum.
    Photoshop Feature Requests

  • Replacing color question

    Using CS5 and Image > Adjustment > Replace Color
    I am trying to change the color of the top of the wall, I select it and adjust the Hue, however it is leaving behind part of the blue that was there before. If I add the blue to my selection or adjust the fuzziness too much, it starts changing the color of the window. What is the best way to get rid of the left over color without changing the color of the window?
    Thank you.

    make a loose selection around the wall with the lasso tool (to exclude the window) and then choose select > color range
    on another point the quick selection tool would make a good job of this selection.

  • Replace Color question

    I have an image taken from off the Net that I need to edit and change some colors.
    In the Replace Color dialog I can select the "source color"  but I can't specify the "destination color" except by dragging the Hue slider.
    I'd like to be able to specify the "destination color" I want in more detail, like selecting it from a pallette, inputting RGB/HSB values etc.
    How could I do that?

    Choose Image > Image Adjustments > Hue/Saturation or press Ctrl + U keys. Drag the Hue slider to -150, Saturation slider to +2 and Lightness to -4.
    If you want to limit the color correction only to the blue gradient, first select the the pointing hand (On Image Adjustment tool) at the bottom of the Hue/Saturation window and click with it once on the blue gradient.
    If you want to sample the values from the green gradient to help you choose the values in the Hue/Saturation sliders, first open the Info panel and change its readout to HSB color, then after opening the Hue/Saturation window and clicking with the On Image Adjustment tool to limit the color range for the correction, disable the On Image Adjustment tool by clicking on its button again. Then move the mouse cursor over the the left edge of the green gradient on the image, and check the values in the Info panel. Then change the values in the Hue/Saturation window and also keep the mouse cursor on the left edge of the blue gradient on the image until the hue value of the blue gradient in the Info panel matches the hue value of the green gradient. Then repeat the same for the Lightness and Saturation.
    I don't know if this is possible on Macs but on Windows any input box in the programs has virtual slider capability by clicking in the input box and using the up and down arrow keys on the keyboard. You can take advantage of this when using the Hue/Saturation window and sampling colors from the image by keeping your mouse cursor stationary on the image to sample values as reflected in the Info panel while using the up and down arrows of the keyboard to change the values of the Hue/Saturation sliders.
    For more details about using the Hue/Saturation controls read the manual: http://helpx.adobe.com/content/help/en/photoshop/using/adjusting-image-color-tone.html#adj ust_hue_and_saturation

  • W540 - FHD 1080p screen - Specs? Test? Review? Color range?

    Hey guys. Just looking for some details of the W540's FHD screen. I've posted in a couple other threads and had no luck, so I'm making a new one.
    I just want to know the actual specs of the 1920 x 1080 screen. Here is all that I know so far:
    Lenovo.com says it's only 220 NITS
    Sadly, it's not the same 1080p TN panel used in the W530 (and T530p?)
    Aaaaand that's about all. I would love to see testing done like what notebookcheck does so we could see actual NITS, color range, and contrast ratio. There don't seem to be any concrete specs about the screen even though the laptop has been out for several months, which is surprising to me. Everyone just talks about the 3K screen. While I would love to upgrade to the 3K screen, my company is cheap and I'm having to beg to get the base model W540 as it is. Plus, we won't be using Windows 8 for some time and Windows 7 would suck with 3K resolution @ 15.5" for most of the apps I use.
    Even someone's opinion that has maybe used the W520 or W530 with 1080p and has seen the W540 (or even T540p) with 1080p to compare the two. I just want to know how bad it is so I can pursue a W530 instead of the W540 if it's a big difference. I am pretty picky when it comes to displays, so this is important to me since I have to use this laptop for 4+ years.
    Thanks!
    Solved!
    Go to Solution.

    AUO B156HW01 V4 is already very old. It is a very thick display by todays standards, and still uses LVDS. All new ThinkPads use eDP, so the B156HW01 V4 won´t be used anymore.
    The FHD display in the W540 are not meant to replace the B156HW01 V4. The B156HW01 was the high-end display since W510 used in the W-Series, and now, the 3K 2880x1620 display is the new "high-end" option.

  • Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe acco

    Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe account.

    Can you please show a screenshot of what exactly you want to replace where?

  • Color Range command in Photoshop CS6 13.0.4 no longer works after update

    I just updated to 13.0.4 at the end of last week.  Today I went to use the Color Range command and it will not select any colors.  The Eyedropper tool works fine.  Adjusting the fuzziness and other options doesn't make a difference.  Nor does selecting multiple instances of a color to add to the selection.  Since I use this command regularly,  I feel confident that it is a bug with the update and I would love to hear of any possible fixes.  Or, is it possible to downgrade back to 13.0.3?  I didn't realize how much I used this and it's a major inconvenience. 

    I feel confident that it is a bug with the update and I would love to hear of any possible fixes. 
    Some people, when encountering unexpected behaviour in Photoshop, seem overly prone to use the term »bug«.
    Have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?
    Could you please post a screenshot with the pertinent Panels and Dialogs visible?

  • Color Range doesn't work correctly with latest update

    as the title suggests, I'm having difficulty using the color range tool properly. It worked perfect just before the most recent update (13.1) and now works very strangely.
    It seems to select whatever color it feels like except the one I need. And then it is very very selective if it will even select anything at all. I'm not sure how else to explain this so it is clearer and easier to be understood. I will post the System Info from Photoshop below.
    Adobe Photoshop Version: 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: AMD CPU Family:15, Model:1, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 4551 MHz
    Built-in memory: 16330 MB
    Free memory: 9473 MB
    Memory available to Photoshop: 14677 MB
    Memory used by Photoshop: 74 %
    Image tile size: 1028K
    Image cache levels: 6
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 3.0
    OpenGL Version: 3.0
    Video Rect Texture Size: 16384
    OpenGL Memory: 1024 MB
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: AMD Radeon HD 7700 Series
    Display: 2
    Display Bounds: top=0, left=1920, bottom=900, right=3360
    Display: 1
    Display Bounds: top=0, left=0, bottom=1080, right=1920
    Video Card Number: 1
    Video Card: AMD Radeon HD 7700 Series
    Driver Version: 8.980.0.0
    Driver Date: 20120611000000.000000-000
    Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: AMD Radeon HD 7700 Series
    Video Card Memory: 1024 MB
    Serial number: 90970601443459613369
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\GGARTD~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 223.5G, 106.8G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
       BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
       CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1681  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
    Required plug-ins:
       3D Studio 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       Adobe 3D Printing 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Angled Strokes 13.0
       Average 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.3
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Clouds 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Collada 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Embed Watermark 4.0
       Entropy 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Extrude 13.0
       FastCore Routines 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Maximum 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Mean 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Measurement Core 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Median 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Mezzotint 13.0
       Minimum 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       MMXCore Routines 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Picture Package Filter 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Pinch 13.0
       Pixar 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Range 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.1
       Shear 13.0
       Skewness 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       STL 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Sumi-e 13.0
       Summation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Variations 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       WIA Support 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       Wind 13.0
       Wireless Bitmap 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Adobe Paper Texture
       TypeDNA Plugged-in
       Mini Bridge
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

    Possibly you are missing something in the way you apply this command. Here's how I use it to select patchy clouds with ragged edges and continuously varying shades of gray:
    Select the eyedropper tool on the Toolbar and on the options bar set the sample size to 3x3.
    Activate the Color Range command. Activate the "selection" radio button and choose "none" in the selection preview. In the "select" box, choose "sampled colors".
    Set a trial fuzziness of,say,50. Click with the eyedropper on a point in the midst of the color you want to select. That's your "base" color.
    Then switch to the "Color Added" (plus) eyedropper, holding the left mouse button down while dragging it over areas deviating from the base color but which you want included.
    If there are non-contiguous areas with still different colors you also want to include, release the mouse and move the cursor to those areas before dragging again.
    All the while, keep an eye on the dialog box display which shows what you've selected, albeit crudely. If you pick up unwanted colors, switch to the "subtract from sample" (minus) eyedropper and drag it over those areas.
    When you think you've got it about right, experiment with the fuzziness slider to see if you can improve things by increasing or decreasing fuzziness.
    Don't re-use the plain eyedropper unless you want to start all over again. Optionally, instead of switching among the 3 eyedroppers, you can activate only the plain eyedropper but use it with SHIFT to add or ALT to subtract.

  • How do I select a color range like in Photoshop OR copy/move a layer into the mask of another layer?

    Hi there,
    I'm trialling Photoshop Elements and wanting to use a black and white (grey scale) layer that I've made as a mask in another layer and don't know how to do it in Elements.  In Photoshop, I'd do this (there maybe a better way in PS to do it, but I haven't discovered it yet)...
    Click the layer i've created that I intend to use as a mask
    Select All
    Copy
    select layer that I want the mask to be applied to
    click the Add Layer Mask button (at the bottom of the Layers window)
    click the mask icon so it is highlighted (and the image isn't)
    switch to Channels view
    highlith the Layer Mask beneath the R,G,B layers and make it visible
    Paste
    make it invisible again
    switch back to layers.
    This works and retains the full range of transparency for semi transparency and soft edges of the mask etc.
    Alternatively, I can select a Color Range, but that doesn't seem to be available in PS Elements.
    So, how do I achieve the same result in PS Elements?
    Thanks for your help
    Jonno

    Perfect!   Thanks very much R_Kelly.  That does exactly what I was hoping to do.
    Cheers
    Jonno

  • Can't replace color in PSE 9

    I am trying to replace one color with another in a photo in PSE 9. Following the instructions in the on-line help does not work. Here is what I do.
    1) Select the eye dropper and click in the image to set the foreground color to the replacement color.
    2) Right click on the brush tool and choose the color replacement tool. Set the options to Mode=Color, Limits=Discontiguous, Tolerance=25%, Anti-alias=On.
    3) Left click on the color in the photo that I want to replace.
    4) Hold down the left mouse button and drag over the area containing the color I want to replace. Nothing happens when I do this.
    In the photos in the Replace Colors in an Image help topic it appears that at some point in the process the cursor should change to include an eye dropper. I assume this is the cursor I should see before I left click to select the color I wish to replace, however, at no time does the cursor ever contain an eye dropper.
    Can someone tell me what I am doing wrong? Thanks.

    How are you trying to save? Works for me.
    Edit à Contact Book
    Add New
    Enter details e.g. Name and email address
    Click OK and close
    Then click Edit à Contact Book and your new name should be in the list.
     

Maybe you are looking for

  • How transfer contacts from lumia 520 to android ph...

    i have two phones 520 and s7562 android phone.i already sync contacts from lumia 520 to outlook.com and gmail.com. can i transfer from here to android phone? if yes how?

  • XL Reporter Can not connect to DI

    I can install add-on XL Reporter. But when i click start its. The error message appear! 'XL Reporter cannot connect DI'. Anybody have any idea or anyway to solve this ploblem?

  • Itunes stores purchase causes itunes freezes

    Despite having downloaded the latest version of Itunes (10.6), itunes freezes any time i try to buy a song.  the purchase does not complete and utines freezes until i reboot. 

  • Http secure-server on 887VA in bridge mode

                      I'm setting up an 887VA to bridge between vlan1 and the atm0 interface. For remote management and to access the https for web management on this device, can I pop one of the 4 fe interfaces into a different vlan to assign it an IP a

  • Where did my podcasts go?  The new version erased ones marked to keep!

    The new version of iTunes just wiped out months of collected podcasts, even though it is still set to keep them all?  Where did they go?  How can I redownload them all if they are no longer available?  What did you break Apple?!