Replace cpu in Compaq V3000

Want to replace single core intel cpu with intel dual core. Does anyone know of detailed disassembly and replacement instructions? Thanks.

jdreed3 wrote:
Want to replace single core intel cpu with intel dual core. Does anyone know of detailed disassembly and replacement instructions? Thanks.
In order to know more for anyone reading we need your system P/N to verify what processor it can upgrade to?
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

MOVED: Replaced CPU and system wont boot?

This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=256743.0

4300 booted, all drivers functional, everything looks good. Thank you so much for the help. I will now say this is solved and explain everything below.
Problem: After replacing CPU computer would not boot.
Hardware: msi 990xa GD55, replacing FX 4100 with FX 4300
Issue: Computer would not boot. Fans and Mobo lights turn on. No signal to monitor.
Solution:
FX 4100 (Core Name Zambezi) and FX 4300 (Core Name Vishera) required different BIOS configurations. Computer was built with Zambezi architecture and the default BIOS ran with no configuration. In order to replace the 4100 with the 4300, a BIOS update (from MSI website, BIOS 22.5) was required.
After installing the new BIOS via USB flash the system posted properly (into a much nicer BIOS.. UEFI maybe? Not sure, but it has a nice GUI). Am now running on the 4300 with no visible problems.
Thanks for the support! Can be marked as SOLVED!
As a side note, for my new build I am looking at a dual Fury X and intel i7 4790k... I was going to buy an Asus Sabretooth Mark 1 but after the support I recieved here I would love to use another MSI. The problem is my build is colored Black and White, and MSI runs black and red. Are there any White and Black MSI Mobo's with socket FCLGA1150 architecture? If that question should go elsewhere please direct me.
THANKS AGAIN!!!

How much does it cost to replace CPU fan?

How much does it cost to replace CPU fan?

It might depends on which iMac model you have and what is wrong with the fan or iMac?
see > How to identify iMac models

HP ProBook 4330s - replace CPU

Hi there!
Could anybody explain, is it possible replace cpu on 4330s from i3 to i5?
Thx!
This question was solved.
View Solution.

Asproot.
The i3 socket that you have is PPGA988 or FCBGA1023.
You can upgrade to an i5 or i7.
Specs for the i7 here.
http://ark.intel.com/products/52231/Intel-Core-i7-2620M-Processor-4M-Cache-up-to-3_40-GHz?q=2620M
Sockets Supported
FCBGA1023, PPGA988
Specs for the i5 here.
http://ark.intel.com/products/50072/Intel-Core-i5-2540M-Processor-3M-Cache-up-to-3_30-GHz
Sockets Supported
FCBGA1023, PPGA988
Specs for the i3 here.
http://ark.intel.com/products/53438/Intel-Core-i3-2350M-Processor-3M-Cache-2_30-GHz?q=2350M
Sockets Supported
PPGA988
Your manual here.
http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5045444&docId=emr_na-c03054507&docLocale...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Replaced CPU and system wont boot?

I am working on building a new rig but my old one hit a hardware fault recently. After extensive Hardware troubleshooting I have found that I have an issue with my CPU (L2 cache specifically). I have been trying to fix this one while I wait to get all the components for my new system. Anyways, heres the issue.
I had an AMD FX 4100, I purchased a AMD FX 4300. The motherboard is a MSI 990XA-GD55.(Edited, wrote P67A at first.. wrong mobo)
I pulled the old cpu and installed the new one (with thermal paste, pea sized in center, pressed heatsink to distribute).
Attempted to boot. The fans turn on, the lights turn on, but there is no signal to the display and my usb devices (keyboard, mouse) do not light up.
I pulled the new CPU out and put the old one in, booted just fine. Pulled the out old cpu and tried again, same problem.
I am currently running on my old cpu. It still works, I just get random shutdowns.
With the old CPU in place I booted to the bios, set to optimized factory defaults (even though I never did any overclocking), selected save and exit, then reset. Tried the new cpu, again no signal to video, no lights on usb devices.
Any Ideas?

4300 booted, all drivers functional, everything looks good. Thank you so much for the help. I will now say this is solved and explain everything below.
Problem: After replacing CPU computer would not boot.
Hardware: msi 990xa GD55, replacing FX 4100 with FX 4300
Issue: Computer would not boot. Fans and Mobo lights turn on. No signal to monitor.
Solution:
FX 4100 (Core Name Zambezi) and FX 4300 (Core Name Vishera) required different BIOS configurations. Computer was built with Zambezi architecture and the default BIOS ran with no configuration. In order to replace the 4100 with the 4300, a BIOS update (from MSI website, BIOS 22.5) was required.
After installing the new BIOS via USB flash the system posted properly (into a much nicer BIOS.. UEFI maybe? Not sure, but it has a nice GUI). Am now running on the 4300 with no visible problems.
Thanks for the support! Can be marked as SOLVED!
As a side note, for my new build I am looking at a dual Fury X and intel i7 4790k... I was going to buy an Asus Sabretooth Mark 1 but after the support I recieved here I would love to use another MSI. The problem is my build is colored Black and White, and MSI runs black and red. Are there any White and Black MSI Mobo's with socket FCLGA1150 architecture? If that question should go elsewhere please direct me.
THANKS AGAIN!!!

HELP For Replacement CPU PowerMac (970 V.2.2) What is the correct model?

Hallo!
I have a question for you!
I have a PowerMac G5 (2003) with cpu PPC G5 970 (v.2.2) 2GHz as seen in System Profiler;
My Mac is a Dual processor, but one CPU is brocken and today it runs with only one CPU.
Now I want to buy the second CPU in ebay, to replace the second CPU broken, but I can't find nothing of clear in apple part number, in fact I Have a CPU 630-4890.
Reading service manual I think that I must search a 661-2901, but i don't know if this is correct!
There is someone that can help me in this choice?
Thank a lot!
Paolo

Look at the model number like the other member said to do . But it you change out the cpu yuo need to re calibrate the fans on it . You need the dvd that will re calibrate the fans for the new processor . The apple service diagnostic disk or better know as the thermal calibration of the fans . Thats a must or I think you will burn up the new processor .
get a service manual plus the disk I told you about . Goto ebay for that .

Upgrade Video Card and CPU - HP Compaq Presario CQ56-160SQ

Product name: HP Presario Compaq CQ56-160SQ
OS: Windows 7 Pro x64
Error message: -
Changes: Not yet!
Hi,
I have a question, and I am wondreing if someone can explain to me what is with this "free" slot from my laptop:
Here is a link with the prinscreen that prooves that I have a free PCI-E slot x16: http://img341.imageshack.us/img341/9830/14782972.png
1. Can I add in that slot a video card? Can someone tell me what type of card?(an example)
2. I want to upgrade my CPU from AMD Athlon II P320 to AMD Phenom II P960. I checket all the specs, compared all the slots, TPD, and I think that it might work.
What do you say?
Can I upgrade my CPU to AMD Phenom II P960?

Hey, adiv093.
The slot you're referring to is being occupied with the wireless card. That is not a free slot for you to use.
To answer the processor question. No, you cannot upgrade to that.
Here is a picture of all the processors the notebook will take.
THX

Bluetooth issue after replacing CPU's

I have a G5 that recently had some work done on it. The CPU's where replaced to fix an issue with the fans running too fast. Ever since the tech replaced the CPU's the Bluetooth keyboard and mouse are sluggish. If I put the mouse more than a few feet away from the case it "stutters". The Keyboard has similar behavior. Here are the things I have tried.
* I have tried replacing the batteries.
* I opened it up and made sure the bluetooth card has the antenna plugged into it.
* I have swapped the card with one from another G5 and get the same behavior.
* I have tried deleting the devices and re-adding them.
I am at a loss here. Can anyone help?

Welcome to Apple Discussions.
The representation that this problem occurred subsequent to the service event in which one or more processors were replaced indicates that the party who serviced it is responsible for this issue. Why are you wasting your time attempting to correct it?
Return your machine to the authorized service provider who effected the repair, explain the problem, and ask them to correct it. Do so before your original warranty, AppleCare extension or 90 day coverage for this event expire.

Replaced CPU same LED error code for CPU problem continues to occur

I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.

atlantrace wrote:
I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.
It's either a corrupted BIOS or motherboard problem. Since you've already replaced the CPU, the only other option is to replace the motherboard.

Replacement Battery - HP Compaq 2230s

looking for a replacement battery for an HP Compaq 2230s -- does anyone know a product number?

Hi:
It should be listed on your battery--a 9 digit part number XXXXXX-XXX.
Your service manual shows the following part numbers for batteries:
4 cell: 493202-001
8 cell: 501935-001
Paul

V890 rebooting after replacing CPU board

Hello,
We have a V890 that we had Sun replace a system board on it. It was system board a which had 2 1.8 processors on it. The original system board was replaced because the CPU's were running to hot. Well after the swap the server ran for 20 minutes and rebooted itself. Looking in the log files, all we see is the following message: unix: [ID 796976 kern.notice] System booting after fatal error FATAL Sys Hardware
Sun is coming out with a new board tomorrow, but I thought that I would ask and see if anybody had any ideas. I guess bad luck that a new board is bad?
Any special steps that need to be done after the installation of the new board like a boot -r?
Thanks,
Gary

Dear Riosjr,
According to Apple's service source individual fan failure has two causes: the failing fan itself or the logic board. You replaced the board, so in your situation where one of the fans doesn't seem to receive any electric power, look for cable damage or bend pins inside the connectors.
Lots of success and regards,
Robbert

Replaced CPU ... still get CPU failure blink code

I have a dv7-4060US, purchased in July, 2010, so it's out of warantee now. About Christmas or so, it died on me, and the blink code at startup said that it was a bad CPU. I've got a new laptop now, so there wasn't any urgency to repairing the old one, so I didn't get around to this until last weekend.
I bought a new CPU for it, and followed the service manual instructions for replacing the chip, but after powering it back on, I still get the same issue - blank screen, single blink. Yes, the part number on the CPU matches the part number from the old one. Yes, it's inserted correctly in the ZIF socket.
Any suggestions?

It was the motherboard not the CPU. CPU failures are very rare; motherboard failures common. I don't put a great deal of stock in blink codes.

Fastest cpu for Compaq 6820s?

What is the fastest cpu I can put in my Compaq 6820s?

Hi, CJ:
A perfectly reasonable question...they are not in the service manual.
The BIOS release notes can be found on the support and driver page for the 6820s.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
You will have to click on each of the releases and then read the release notes for each one.
You probably just overlooked the last sentence of my above post as to where the BIOS release notes are located.
Paul

Replacing CPU in HS500

i have a hs500 pc, if i buy a new cpu and replace it with my current one will i need to download any software to make the cpu work. could you email please .email>>>>> xxxxxxxxxxxx
Mod edit: Removed email address to prevent abuse, please use the Private Messaging service instead.

Bad CPU? Can happen you know. Ugh.

Compaq V3000

I need to replace the hard drive in the lap top because it is dead. I have spare drives but this laptop takes a strange wire connection not the normal gold tabs the sata drives have. I see on Ebay they have caddys with connectors. Are these connectors adapters so you can install normal drives? Where can I buy a drive for this laptop nobody has one for sale anywhere I can find. Exccept a couple of $3-400 for 60Gb ones. Is this laptop because of propritary hardware a paperweight?

Hi,
Well, your machine uses one of the following HDD (first col):
   http://www.hgst.com/tech/techlib.nsf/techdocs/3DC5E7AD021F5A8386256EBA00749D6D/$file/Travelstar_5K10...
Very hard to find one now and you can see they are more expensive and very low capacity. Given its age, my suggestion: keep it for your muesum, you can buy much better machine with a same amount of money now. For example:
    http://budgetpc.com.au/refurbished-products/refurbished-notebooks.html
I bought few laptops from this place including one HP Elitebook before Easter 2014, in very good condition:
     http://budgetpc.com.au/refurbished-products/refurbished-notebooks/used-elitebook-2740p-12-1-touch-i5...
It's slow but its specs is top class.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Replace cpu in Compaq V3000

Similar Messages

Maybe you are looking for