Replace dvd drive with SSD

I am thinking about removing the dvd drive in my macbook pro 15" and putting in a SSD drive. Then create a fusion drive using both the existing harddrive and the new ssd.
What is recomended?
1) Swapping the hd to the dvd and putting the ssd in the existing hds place.
2) Or just replace the ssd with the dvd-drive? Leaving the HD where its at.

MacBook Pro's, for some reason, like the boot drive in the 'original' HD location. I have no idea if this would be the case with a DIY 'fusion' drive, however.
You may want to actually call OWC to see what they recommend (and, if you're going to replace the optical drive, you simply can't so better than the OWC Data Doubler)...
Good luck,
Clinton

Similar Messages

I have a Mac book pro with regular drive, I want to replace the drive with SSD, so can I do t for Mac book pro purchased in 2012 and which SSD is recommended. I am looking for 500 to 700GB SSD.

I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
Thanks

Upgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton

Want to replace DVD drive with second HDD on Probook 6570b regarding to setting BIOS

After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
This question was solved.
View Solution.

Berislav wrote:
After replace CD/DVD Drive with HDD in matching Bay I got a problem with BIOS. After starting I got a message "there is no a Bootmanager" and CTRL+ALT+DEL. Then is only posible F9 and Boot Option to use manualy Hard Drive. Please tell me what I have to do to solve this problem.
Hi,
Check the boot priority in the BIOS. Make sure that DVD is not the first boot option. It looks like when you swapped the DVD for the hard drive it won't skip boot from DVD to the primary hard drive and stays on the DVD option but the DVD ROM is not there anymore and it finds the new hard drive. However, the operating system is on the primary hard drive which is a different boot option. It finds the new hard drive but because the OS is not there it says no bootloader because the bootloader is on a different hard drive.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Replaced CD/DVD Drive with SSD in HP Notebook

I would like to replace the cd/dvd drive in my hp pavilion dmv-1000 with an SSD. I know that Optibay makes a caddy for several apple computers that does this. Does any one know if HP or anyone makes a caddy that enables me to do this? Thanks!

Celebr8tor wrote:
I apologize. That should be DM4 - 1000. it is in the pavillion family of HP notebooks. I will continue to research this and if I find something I will post it here.
thanks for the response.
Go to ebay and look for: hdd 2nd caddy dm4-1060us.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Replacing super drive with SSD

Hi everyone,
My iMac is getting old (2.8GHz Core 2 Duo).
I'm thinking to replace a super drive with 240GB SSD (will install OS and Apps). I will still use my internal SATA drive for data and files.
240GB SSD > OS and Applications
500GB SATA > all data and files
I'd like to know if I get significant speed advantage??? Anybody has similar configuration? How is it? Is it worth to do?
Also I'm thinking to upgrade my MBP same way..
Thanks!

Well first off it voids your AppleCare/warranty as a unauthorized change, but if you don't care then most have preferred placing the SSD where the hard drive is and moving the hard drive to where the Superdrive is, placing the Superdrive in a external encloses.
SSD made to be the boot/OS/applications/bare bone user drive for speed and the hard drive for large storage (as SSD's can wear out)
You won't be able to boot off the external Superdrive or install Windows from it according to reports I read.
If you contact Bmer art MacOwnersSupportGroup
http://macosg.com/
He has a lot of experience and did it himself so he can teach you how it's done, the best SSD to use, cloning your drive and so forth.
http://www.mcetech.com/optibay/
http://www.harddrivebenchmark.net/high_end_drives.html

Replacing optical drive with SSD and HD with new HD

Hi folks, recently my macbook pro unibody's (2011) hard drive started encountering some fatal errors. I've gone through all possible fixes, and it looks like the only option left is to replace the HDD. As much as this initially bummed me out, I'm a little excited about the prospect now. I think I would like to go ahead and replace the optical drive with a SSD while I have the computer open to replace the HDD. This will breathe some serious new life into my macbook pro.
My question is, which SSD's and HDD's are compatible with the macbook and which brands do you guys (the community) recommend? Should I upgrade my ram while I'm in there? How difficult of a job is this? I am mechanically inclined but I have much more experience working on tractors than electronics. Thanks for any advice or input you can offer!

Go to OWC to get the Data Doubler bracket for your model. You can also find HDDs and SSDs there. Be sure to put the SSD where the HDD is located and put the HDD in the optical drive bay. Upgrading RAM is always a good idea. I've done all these in my 2011 MBP. OWC also provides tools needed and online video tutorials.
For optimum use of this combo only install OS X on the SSD. Install everything else on the HDD. Then follow these instructions for setting it up to have the computer boot from the SSD but use your Home folder that is on the HDD:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.
Be sure to use Trim Enabler 3.3 to activate TRIM on the SSD.

Recently replaced optical drive with SSD and stripped the screw of the hinge on the optical drive. Now speaker is muffled

I still have the hinge but its not on the enclosure for the ssd. Now my speaker on the right side is muffled. Do I need a replacement bracket or is my problem unrelated?

It would be helpful if you indicated the EXACT model/year MBP that you have.
What 'hinge ' are you referring to? I am unaware of any hinges on an optical drive.
Look at the iFixit.com website for pictorial instructions that may assist you with your problem.
Ciao.

Early 2008 MBP, replaced optical drive with SSD, now computer won't sleep.

So pretty much you know everything already, installed the operating system on the SSD everything works fine except the computer wont sleep.
Any help wouldbe great
thanks

I am about to do the same upgrade on MBP 13". Reading around the topic I think this problem is caused when the OS is running from the drive in the optical bay.
See extract from following link:
http://lifehacker.com/5541774/how-to-install-a-solid+state-drive-in-your-macbook
Update: It seems that connecting the SSD to the optical drive slot will give you problems waking from sleep, since the MacBook doesn't look to that SATA port for your main drive. I did not notice this before, as I don't sleep my computer. So, instead of installing your SSD in the Optibay, you'll want to disconnect your regular hard drive, install the SSD in that slot, and then install your old drive in the Optibay and continue as written.

Is it available to replace DVD driver in MacBook Pro with SSD 512GB Crucial m4 2.5-inch SATA 6Gb?

I'v external DVD driver and I'd like to replace DVD driver with in MacBook Pro with SSD 512GB Crucial m4 2.5-inch SATA 6Gb. Is it available? All your opinions are welcome.

Here is a post from another thread on this problem.
So here's the deal, don't expect SATA III devices to work on the optical port. I just went thru this on both my 2009 and 2012 13" MBP's. The 2009 is SATA II (3Gps) and the 2012 is SATA III (6Gps). A SATA III SSD (OWC 6G) will only connect at 1.5 Gps on the 2009. On the 2012, it actually connects at 6 Gps, but every drive I tried crashed (dropped drives, file errors, kernel panics), including a Samsung 830 and Seagate Momentus XT 750. Out of desperation, I stuck the (slow 500 Gb) Apple HD in, it connects at 3 Gps and works like a champ. Check your System Info on SATA info. If you have a 2009, don't waste your $$$ on high end SSDs or drives. If you have newer, BEWARE, you're likely to have issues with high end SATA III devices. On the bright side both Samsung and OCZ V4 work great on the main drive (450 MB/s read) and boots in 10 seconds!! The optical drive SATA port is a major issue for everyone ( like me ) who buys MBPs because they can trip them out, this is a real nagging issue/obstacle. This is a firmware issue that needs to be addressed by Apple. I'm hoping for a firmware update and that Apple isn't doing this intentionally.
Posted by Halfmoonh4
Found here.
https://discussions.apple.com/thread/3949727?tstart=0

If i swap my dvd drive to SSD does it terminate the warranty??

i wanna upgrage my 101.
i am planning to buy a ssd and replace dvd drive with it,
but my laptop still under 1 year warranty,
if i do this, does it gonna end the warranty??

Apple allows you to install more RAM and replace the hard drive without voiding warranty. However, they don't allow you to modify the disc drive, so you will void warranty if you remove it to install a SSD

Replacing Internal DVD Drive with HDD in Mac Mini?

Has anyone tried replacing the internal DVD drive with a hard drive, giving you TWO internal hard drives? I think you need a cable to match up the SATA connectors. Then you could use a USB external enclosure for the DVD.
Thanks.

Very interesting, thanks el Duque. Too bad MCE doesn't make a carrier for the Mac Mini. I wonder if one for a Macbook Pro can be easily modified to fit?
I have just learned that the SATA connector on the logic board for the optical drive in Macbooks and the Mini is called a "Slim-SATA" connector. Instead of the power side of the connector having 15 pins, it only has 6, with both types of connectors having a standard 7-pin data side. Both power and data hook-ups are achieved in a single connector -- a power side and data side.
Since the ports on 2.5" hard drives are "standard" SATA connectors, AND they don't match up to the logic board's connector location (like with the connector location on the optical drive), a cable is needed to run between the HDD and the logic board connector.
Unfortunately, such a cable is not available -- yet. Instead, one has to be fabricated out of two types of SATA cables -- a Molex 4-pin to SATA 15-pin power cable and a combination cable that looks like this:
http://www.byteccusa.com/product/SATA/SATA-XP118/SATA-XP118.htm
The fabrication involves replacing the molex 4-pin power end of the combi-cable with the SATA power end of the molex 4-pin to SATA power cable (cutting and soldering). The BIG question now is whether a HDD will work with just the two-wire power cable (of the combi-Sata cable) that an optical drive normally uses? Anyone know if it will? Thanks.

G62-234DX replaced hard drive with new Samsung 250 GB. Same size as installed.

G62-234DX Hard drive dead. I replaced hard drive with new Samsung 250 GB. SATA II hard drive and used the recovery Windows 7 Home edition DVD. Error message appeared after windows loads files and starts windows from the recovery DVD. An error dialog box opens after completing and indicates, This computer is not supported by the recovery discs. You will not be able to continue to recover this system with these discs. error: 0100-1425 -3627-3628-3623-3624. Hit OK and system powers down.

Hi:
If you purchased the recovery disks from HP, please see if making and running this first helps.
"CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive."
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en

Fail to enter bootcamp win7 after replacing CD-Ron with SSD

I replaced CD-Ron with SSD.
I successfully enter mac on both HD and SSD, failed with enter win7 on HD.
It stops at black screen and a write bar shining on the corner.
Is it because the windows system can't find my CD-Ron?Then how?
Tks. ^^

So I try booting without the DVD player attached, and there is no Windows option or startup item.
I try booting with the DVD plugged in, but without the USB attached, and I get the Windows DVD to show as a start up option: I click it and it sits with a black screen and the blinking prompt.
I am seriously at a loss here folks. What the heck.
The machine sees the DVD.
It does not see or acknowledge the USB stick as anything past the BOOTCAMP function of putting files on it, but nothing happens with it past that.
Am I missing something in BootCamp? Am I missing an option?
Cello?
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640    975835479 Unknown
3      975835480    977105023 Mac OS X Boot
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1    977105059 ee EFI Protective
MBR contents:
Boot Code: None
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Unknown
Partition at LBA 975835480:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot

Touchsmart IQ542 - Replacement DVD drive

Does anyone know where I can get a replacement DVD drive for my Touchsmart IQ542? The current drive has decided that it really likes the DVD that is currently in it and won't spit it out, I suspect that this problem will only get worse so now is probably a good time to replace the drive.
Ideally I would like to put a Blu-ray drive in but if that's not possible a replacement for what is already in there would be fine.
This question was solved.
View Solution.

Hi,
Sure. Here is a search I did for UK sources for the part.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

G x64 replacement dvd drive

I am having trouble locating a replacement dvd drive for a HP G6 2240sa laptop.
Part no. 681814/001
HP do not have in stock and none of their spares partners either.
Had no help from HP.
Plenty of used ones in USA but postage is far too high.
Any sugestions please.

http://www.ebay.com/itm/HP-Pavilion-15-6-G6-2000-Genuine-SATA-DVD-RW-Burner-Drive-GT50N-681814-001-G...
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.X681814-001&_nkw=68...

Replace dvd drive with SSD

Similar Messages

Maybe you are looking for