Replace Empty Ink Cartridge message flashes after the cartridge has been replaced

Printer is C61P50 All in One.
Has been printing black only, but this morning it said it could not continue unless the empty Magenta cartridge was replaced.   I bought a new one, installed it, and still get the same message. 
Occasionally I get another about the light blue cartridge ink being expired.   That I can clear by hitting OK, but then I am back to being hung up on the supposedly empty magenta which I have already replaced with a brand new one.

Hello palang,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I am sorry to hear about the ink cartridge issue you are having with the Magenta. I have looked into this for you and suggest completing all of the steps in the troubleshooting guide below. I hope this helps resolve this for you!
'Ink Cartridge is Missing, Incorrectly Installed, or Not Intended for Your Device' Error Message is ...
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export".  The message appears after the piece has seeminly finished exporting.  What am I doing wrong???

    After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export."  The message appears after the piece has seemingly finished exporting.  What am I doing wrong????

    I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
    Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
    Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

  • I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

    I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Why does my Elements 12 ask me to enter Program Key after the product has been used and registered

    I have had Elememts 12 for several months ... when I bought it ...I downloaded the program and registered it ... now ... every once in a while the program asks me to enter the Key number as if I never registered it ... also sometimes I get a message about my 30 day trial ...

    I purchased Elements 12 not the Premier addition .... the disk Elements 12 comes with a trial version of Premier ... I did not install the 30 day trial version .... maybe t is Adobe trying to sell me the Premier addition ... I will pay more attention the next time the message comes up ... after reading some of the posts, I think that is what is happening ... I will have to wait ... someone wrote that they had the same problem and after a while, the message stopped appearing .... as I indicated .... I will look more carefully the next time I see the message...
    Thanks again
    Date: Tue, 1 Apr 2014 16:22:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: Why does my Elements 12 ask me to enter Program Key after the product has been used and registered
        Re: Why does my Elements 12 ask me to enter Program Key after the product has been used and registered
        created by A.T. Romano in Premiere Elements - View the full discussion
    JEROMESTEINER
    I am trying to get through all your recent replies to go back to your post numbered 8.
    1. Go to Control Panel/Programs and determine if you have Premiere Elements 12 and Photoshop Elements 12 installed.
    2. When you have gotten the try out dialog, what program is mentioned in the dialogs - Premiere Elements 12 or Photoshop Elements 12?
    3. The fundamental question is what did you purchase
    a Photoshop Elements 12
    b. Premiere Elements 12
    c. Photoshop Elements 12 and Premiere Elements 12
    From what you wrote it sounds like Photoshop Elements 12. Premiere Elements 12 seems to have come along as a tryout.
    4. If Premiere Elements 12 is a tryout, after 30 days from first install of it, you should not be able to use it without a purchased serial number specific for Premiere Elements 12.
    5. If you have no interest in Premiere Elements 12 tryout, uninstall it if it is installed. If it is not installed, then it is not the cause of your trial messages. But, I offer you this thought. Are these really License This Product/Continue Trial messages or are they really promotional dialogs (ads) put on your computer by Adobe who knows you have Photoshop Elements 12 and are trying to get you interested in Premiere Elements as well?
    Please review and consider.
    Thanks.
    ATR
    Add On...All my encountered with tryout pop ups have been as described and restricted to purchase Photoshop Elements 12 and Premiere Elements 12 purchased as bundle.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6262855#6262855
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6262855#6262855
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6262855#6262855. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Creating a Materialized View Log After the Data has been instered

    Hi,
    I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
    This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
    Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
    The way the replication is intended to work is:
    Oracle> Data inserted into table
    Oracle> writes the vector data to the MVL
    Script> Monitors the MVL and can see the changes being made to the Oracle Table
    Script> Updates MySQL with the data and removes the rows from the MVL
    MySQL is then used with other unix systems
    Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
    Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

    Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
    From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
    I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
    Many thanks for your help.

  • Is there a way to see what font was used originally, after the type has been converted to outlines?

    Hi all, I would really like to know if there is any way to find out what font was used originally in an Illustrator document, after the type has been converted to outlines? The reason for this is I need to update some wording in a couple of old logos I had made and I have NO idea what font I had used...for the life of me I just cannot remember. Because this was so urgent for one of my projects I had to do a search online via "WhatTheFont" to see what font it could be (which I then didn't seem to have in my library!), and repurchase it. I am 99% sure I HAVE the font - or something VERY close - but under a different name.
    Normally I keep a much better record of fonts used but there have been times occasionally in the past when I have done something in a hurry and changed the type to outlines without keeping the original, or keeping detailed notes at least. The fact that I did NOT keep notes on a few projects I have done in the past has made me want to kick myself because now I need to revisit one of those again..grrr:)
    Can anyone offer any advice? I appreciate your help as always:)
    best,
    Christine

    Christine,
    You can also ask in the Typography forum,
    http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
    The guy running whatfontis is a regular poster there.
    And apart from
    http://www.whatfontis.com/
    there are
    http://www.identifont.com/
    http://new.myfonts.com/WhatTheFont/
    and especially for script,
    http://www.bowfinprintworks.com/ScriptIDGuide.html

  • Cannot create a session after the response has been committed (Tomcat 6)

    I'm getting a rather annoying error when I try to open a pretty basic JSP page.
    I'm rather new to the whole JSP scene, so I'm following the example found on pages 287 and onwards in "JSF in Action - Manning" in case anyone wanted to check my code against the source.
    I've searched for about 4 hours now, coming back to this site a couple of times, once reading about writeouts and stuff. But I'm not really sure this is the issue in this case and if it is, where exactly the problem lies.
    I've already fixed a number of errors I got (jtsl.jar and standard.jar missing etc...) but this particular problem is driving me (and my co-workers for that matter :-) ) up the wall.
    Anyone willing to help me out here?
    Error:
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Cannot create a session after the response has been committed
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:152)
    root cause
    java.lang.IllegalStateException: Cannot create a session after the response has been committed
         org.apache.catalina.connector.Request.doGetSession(Request.java:2301)
         org.apache.catalina.connector.Request.getSession(Request.java:2075)
         org.apache.catalina.connector.RequestFacade.getSession(RequestFacade.java:833)
         org.apache.myfaces.context.servlet.SessionMap.setAttribute(SessionMap.java:53)
         org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:103)
         org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:35)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedViewInServletSession(JspStateManagerImpl.java:523)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:358)
         javax.faces.application.StateManager.saveView(StateManager.java:47)
         org.apache.myfaces.application.jsp.JspViewHandlerImpl$StateMarkerAwareWriter.flushToWriter(JspViewHandlerImpl.java:387)
         org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:322)
         org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
         org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:132)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:138)
    Source Code of login.jsp:
    <%@ page language="java" contentType="text/html; charset=ISO-8859-1"
        pageEncoding="ISO-8859-1"%>
    <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <f:view>
    <html>
    <head>
         <title>
              <h:outputText value="ProjectTrack"/>
         </title>
    </head>
         <body>
              <table>
                   <tr>
                        <td>
                             <h:graphicImage url="/images/logo Skillteam.jpg"
                             alt="Welcome to ProjectTrack"
                             title="Welcome to ProjectTrack"
                             width="435" height="120"/>
                        </td>
                   <td>
                        <font face="Arial, sans-serif"
                        size="6">
                        <h:outputText value="ProjectTrack"/>
                        </font>
                   </td>
                   </tr>
         http://forum.java.sun.com/post!default.jspa?forumID=45#
    Click for bold     </table>
         </body>
    </html>
    </f:view>
    web.xml & faces-config
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="http://java.sun.com/xml/ns/javaee"
         xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
         <display-name>ProjectTrack</display-name>
         <welcome-file-list>
         <welcome-file>faces/login.jsp</welcome-file>
         <welcome-file>index.html</welcome-file>
         </welcome-file-list>
         <servlet>
         <servlet-name>Faces Servlet</servlet-name>
         <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
         <load-on-startup>1</load-on-startup>
         </servlet>
         <servlet-mapping>
         <servlet-name>Faces Servlet</servlet-name>
         <url-pattern>/faces/*</url-pattern>
         </servlet-mapping>
    </web-app>
    <?xml version="1.0"?>
    <!DOCTYPE faces-config PUBLIC
    "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
    "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
    <faces-config>
         <navigation-rule>
              <from-view-id>/login.jsp</from-view-id>
              <navigation-case>
                   <from-outcome>success</from-outcome>
                   <to-view-id>/inbox.jsp</to-view-id>
              </navigation-case>
              <navigation-case>
                   <from-outcome>failure</from-outcome>
                   <to-view-id>/login.jsp</to-view-id>
              </navigation-case>
         </navigation-rule>
    </faces-config>Setup:
    Eclipse Europe 3.3.0
    Tomcat 6.0.13
    MyFaces 1.2
    JRE 1.6.0_02

    When searching for this error, this was the first page google gave me. I found the answer and just in case anyone else stumbles in here with the same question I thought I'd share my findings.
    Unfortunately, if your problem is the same as mine, you're going to feel pretty silly. I was navigating to the wrong page. If MyFaces(when running tomcat) tries to resolve to a page that doesn't exist, the error given above is what happens.
    In my case I accidentally put my .jsp page into the wrong directory and ended up banging my head against the wall for an hour figuring that out. Hope this helps someone.

  • HT3986 How do I start up Mac after the Windows has been installed.

    How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

    Welcome to the Apple Support Communities
    1. To boot into Mac OS X, press X key while your computer is starting.
    2. Install Boot Camp drivers

  • I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares.  How do I fix this?

    I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares.  How do I fix this?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Photoshop elements 13 will not initialize after the program has been opened

    Photoshop Elements 13 will not initialize after the program has been opened once.  If I remove Elements processes from task manager, Organizer will open  I am using Windows 7 and Elements 12 is also installed on the same computer.

    the password and licensing agreement are needed for installation, not to run.
    check your install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

  • 7.1.1 After the update has been deleted TOUCH ID feature. disappeared

    7.1.1 After the update has been deleted TOUCH ID feature. disappeared

    Have you checked to see if the music is in iTunes on the computer? if so dose the music play on the computer? in itunes, if you click on the iphone from the list on the left, and then click on the music tab on the right, is sync music checked? if so are you syncing all music, or a specific play list(s) of music? if it's syncing only specific play lists, is there any music in that play list?

  • Is there anyway I can find the key after the program has been installed?

    Is there anyway I can find the key after the program has been installed?

    One the product has been installed you cannot locate the Serial Number on the installed copy. Though we recommend you register your product on Adobe.com, by Going to Help-- Registration.
    Thanks!

  • Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipa

    Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipad2 has been an error?

    Hello joe2616,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Where is the Document Number of a Journal after the Journal has been deleted in GL?

    hi, guys,
    can anyone tell me where is the Document Number going after the journal has been deleted in GL? can it be reused by another journal? or it is killed and dead in database?
    thanks.
    Ejw

    They possibly still exist on the hard drive if you haven't overwritten that space already.
    Your only hope is to try a file recovery program like Data Rescue 3 or some sort like that.
    (note: the product linked to is an example of the suggested kind of software that may help you; it is not in any way my recommendation or endorsement of the product. I haven't used this product and can't comment on its effectiveness).

  • TS4009 how do you retrieve information after the system has been reset to default

    how do you retrieve information after the system has been reset to default?

    From a backup on itunes or icloud, assuming you have made backups.  Connect to itunes and in the first tab for your device, choose to perform a restore.

Maybe you are looking for