Replace fan in Pix 506e

A customer has a Cisco Pix 506e in which the fan is making some serious noise. What is the part number to replace this fan?

It is not a FRU, you'll have to open a TAC case to have the device replaced.
Hope that helps.

Similar Messages

  • How to replace Fan that is shutting down laptop

    I get the message that my computer is shutting down because the fan is not working.  How do I replace the fan if that is what is wrong with it.  hp protectsmart laptop model  LH601UA#ABA

    loweps wrote:
    I get the message that my computer is shutting down because the fan is not working.  How do I replace the fan if that is what is wrong with it.  hp protectsmart laptop model  LH601UA#ABA
    You can order a replacement fan from eBay but you need to first take apart the laptop to find the fan part number to make sure you get the right part. Otherwise you will have to send it in to get it fixed. Those are your two options right now.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Linksys WRT600N vs CISCO PIX 506E.... Firewall / Routing Performance

    Hi:
    I am new to the forum and was hoping to tap into some of your expertise. I have a Linksys WRT600N version 1.1 and I recently acquired a CISCO PIX 506E firewall. My question is what should I use as a firewall? Both have SPI etc. Should I:
    a) Use the 506E as a firewall and use the 600 as a wireless access point, or
    b) Use the 600 as a firewall and wireless access point.
    Do both routers have the same firewall routing performance? I want to use the storage feautre on the 600N, but if I do that and use it as a wireless access point the 600 can't get the proper time from the Internet, so my time for newly created folders and files shows they are 10 years old.
    Anyway, just thought I would post and find out what some of the experts thought and maybe someone from Linksys or CISCO. I know the 506E is discontinued and was manufactured around 2001 and the 600N is a new model.
    (Edited subject to keep threads from stretching. Thanks!)
    Message Edited by JOHNDOE_06 on 05-06-2008 10:41 AM

    The PIX is a real firewall. The WRT has a firewall which mostly protects the router itself. People prefer to buy a "SPI firewall router" instead of a simple "router" even though the router firewall does nothing or little to protect the LAN. The only firewall configurations on the WRTs you can usually do is on the Access Restrictions tab. But that's usually all. The LAN itself is not protected by the firewall. You would notice this if you had a public IP subnet and ran it through the WRT: the LAN would be fully exposed to the internet. Some routers have a few functions like protection against denial of service attacks or similar. But even then this often filters only the traffic targeted at the router and not the LAN.
    The common protection of your LAN you have on the WRT is because you use private IP addresses inside your LAN and the router does NAT. However, NAT is not a security mechanism but a mechanism to solve the problem that you can only have a single public IP address but want to use multiple computers, which is why you have to use private IP addresses. Current NAT implementations usually drop unsolicited incoming traffic because they don't know to which IP address in the LAN to send it to. But the notion of NAT is to deliver and to allow connectivity. This has nothing to do with security or a firewall.
    Thus, if you want to use a real firewall use the PIX. On the PIX you can configure the traffic which is allowed to enter the LAN and which not. It is far superior in this respect to the WRT. However, as it is a older model, I cannot tell how fast the PIX is. You should be able to find the old data sheets of the PIX somewhere on the cisco website. They should mention the possible throughput. I guess it won't be an issue.
    To me another point for the PIX are the VPN capabilities which allow you to securely access your LAN while you are on the road.
    Of course, you must know how to configure the PIX correctly. It is a complex device and can be configured pretty much for anything you like. This means of course if you do it wrong you may end up with little or no security.
    BTW, there are no people from linksys in this forums except the moderators (which may be from lithium). To hear from Linksys you have to contact Linksys support.

  • G5 - ATI X800 XT Noise. Replacement fan?

    I have a G5 with a stock ATI Radeon X800 XT video card. Over the last few weeks it has been making a whining sound. I tried to clean it with compressed air but it still makes the noise. I know years ago they made replacement fans like the ATI Silencer5 but I can't find one anywhere since they were discontinued. Any suggestions on how to salvage this card? I like the card and would rather stick with it as opposed to replacing it.
    Thanks.

    Hi-
    Not sure, but a bury frame fan might have the right connector:
    http://www.directron.com/ec6010m12s.html
    If the fan in the X800XT is of the same size and has the same mounting pattern, replacing the fan may be a good option.
    Problem is, graphics cards use very small connectors, which are non-standard for replacement fans (except for Arctic Cooling products).
    This is why many opt for cutting wires, or else accept the use of 2 or 3 pin fan to Molex adapters....

  • Pix 506e firewall configring for mail( Exhange), Web, FTP server

    Hi
    I am Hemant, We have pix 506e firewall, D-link ADSL dsl-502t and my IBM xseries 236 server.
    I have fix static live ip 59.181.103.220 which i have got ISP (MTNL), and the same ip is given in fqdn in www.net4india.com (a company from where we have registered domaim name and taken space)
    My problem is i am not able to send mail through my mail server (loyalindia.co.in)but i am receiving mails from any server.
    My network design is as fallows:-
    ADSL (WAN)59.181.103.220, ADSL (LAN)59.181.103.221. Pix 506e (out) 59.181.103.222, Pix 506e (in) 192.168.1.1. My domain mail server loyalindia.co.in (Exchange server) ip 192.168.1.2
    I am tryied with (ADSL)natting and without natting but the problem is same.
    If i am removing the pix 506e and directly connecting the server to adsl i am able to receive and send mails properly.
    can anybody who can support me?.

    Hello
    I think there won't be one QUCK START to get all of this up and running, there are multiple examples on the following page, a few that might help would be:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
    PIX/ASA : Connecting Three Internal Networks with Internet Configuration Example
    PIX/ASA : Connecting Two Internal Networks with Internet Configuration Example
    ASA 7.x/PIX 6.x and Above: Open/Block the Ports Configuration Example
    PIX/ASA 7.x: Enable VoIP (SIP, MGCP, H323, SCCP) Services Configuration Example
    PIX/ASA 7.x and FWSM: NAT and PAT Statements
    PIX/ASA 7.x and later : Port Redirection(Forwarding) with nat, global, static and access-list Commands
    Configuring PIX Firewall with Mail Server Access on the DMZ
    Configuring the PIX Firewall with Mail Server Access on Inside Network
    Please rate if you find the post helpful.
    Regards
    Farrukh

  • Manual for PIX 506E?

    Hi everyone! I just became in charge of a PIX 506E, which I have no experience with. I was not told how it was set up, what the password is, etc...Oh, and the dongle for the console connection is non-existent as well.
    On Cisco's website, I can't find any manuals for it. The only documentation I could find was a quick setup guide, which is not helpful at all if it is already set up.
    Basically, I am looking for any help anyone can provide so that I can get into the interface for the PIX 506E so I can see how things are set up and to change things in the future. Thank you in advance!

    This could be a long journey or a short one, but for sake to help you here we go..
    When I say long journey it is because all depends on what type of resources you have at hand, at least you have us in netpro, but more specifically if you do not know the admin password for the PIX that is number one headache, you need password recovery procedure, please try to make an effort to obtain the password to not go through all these procedures, if you cannot then you need password recovery .
    See password recovery.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
    Please have handy these tools
    1- Console cable to connect to COM port in PC and PIX console port
    2- Terminal emulator - hyperterminal
    3- Mini hub to connect your PC and pix pysical interface to it
    4- tftp server software running on your PC
    Follow instructions on link.
    As for instructions about the PIX there are hundreds of documentation in Cisco website, we can direct you to them but first you need to gain access to PIX.
    HTH
    -Jorge

  • Getting a replacement fan & heatsink module for my MSI NX6800GT (agp)

    Hi all,
    I got a bit of a problem, the fan on my MSI NX6800GT (agp) sounds like a dog, after removing the card and having a look, it appears that the spindle that holds the fan in place has worn out (the fan seems to drop down onto the plastic and thats what is making the noise) . Its buggered basically. Do any of you fine people know of where I can get a decent replacement fan and heatsink?
    All help appreciated
    John

    OK, I ordered one of those  nv silencers, I thought about contacting MSI like you guys said but after reading about this product I thought what the hell . . . £20 but worth it.
    http://www.gladiatorcomputers.com/ProductDetail.aspx?StockCode=ACCARTREV4NVS53&Link=SearchResults
    It came yesterday, so last night I installed it, fitted well, one small thing on the instructions, there is an "L" shaped metal bracket called a passive heatsink plate, now I know my **** from my elbow but could I work out where this was supposed to go? . . . NO.
    Anyway it appears that I dont need this bit, why cant they just say "this bit is optional". Kinda scary fitting stuff like this when youre as green as me.
    Anyway, all went well. Thank you all.
    Regards
    John

  • PIX 506E routes died

    Hello experts...
    I've had a set of PIX 506E boxes holding an IPSEC tunnel for a good year or so without a hitch. Today, the tunnel dropped and I lost access to the remote site. The local PIX can only ping devices on the local [inside] subnet and all nodes on all my other subnets can't find a route to the PIX. On the local gateway, I can ping the PIX, but can't traceroute to it. I also ran an ICMP debug and could see when remote nodes ping, but the reply doesn't leave the box.
    Nothing has changed, routes all look good, i've reset everything -- no luck at all. Any idea what may be happening? I have a feeling it's a basic issue that looks more complex that it is, but i'm stumped at this point.
    Any help would be greatly appreciated!
    Thanks,
    Jad

    Use this Cisco PIX 500 Series Security Appliances Troubleshoot and Alerts
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/tsd_products_support_troubleshoot_and_alerts.html

  • Can PIX 506e return port unreachable

    Hello
    Can PIX 506e return ICMP port unreachable on Linux traceroute with UDP data gram, and if somebody knows how, can you make an example of the access-list how it should be written to allow this response?

    PIX won't return an ICMP port unreachable message and access lists cannot be configured to make PIX to respond a port unreachable.

  • Trying to get a replacement fan for HP Pavilion 15-n037so Notebook

    Hi, I am trying to find out where I can buy a replacement fan for a Pavillion 15 series laptop (15-n037so) in Sweden. HP PartSurfer returns no parts and I cannot find a HP phone number to call to ask. Any help (either a web address or a phone number) would be much appreciated. Thanks in advance, Mike.

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. Here is the Maintenance and Service Guide for your Notebook. Please look at page 25. It gives you the fan part number.  You could also Contact HP. To Contact Us please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
    Step 4. Scroll down and click on: HP contact options - click on Get phone number
    Case number and phone number appear.
    They will be happy to assist you immediately. Have a great day!

  • Pix 506e as Content Filter

    Is there any way to effectively use a Pix 506e as a content filter? I see some example configurations involving an ASA 5500, but I was wondering if the pix alone will allow content filtering. We are a small business that is looking to restrict just a few websites to our DHCP users. (i.e. eBay, yahoo mail, Amazon). We already have the pix. Thanks!

    Suppose if you want to filter streaming media content with PIX 506E, you have two options. The first one is to block ports on the PIX and the second is to use Proxy Server to filter URLs. Since our main concern is doing it on the PIX, You may enter these commands on the PIX for well-known ports that you could block on the firewall:
    access-list nostream deny udp any any eq 2979
    access-list nostream deny udp any any eq 1790
    access-list nostream deny udp any any eq 1755
    access-list nostream deny udp any any eq 1736
    access-list nostream deny udp any any eq 554
    access-list nostream deny udp any any eq 537
    access-list nostream deny tcp any any eq 2979
    access-list nostream deny tcp any any eq 1790
    access-list nostream deny tcp any any eq 1755
    access-list nostream deny tcp any any eq 1736
    access-list nostream deny tcp any any eq 554
    access-list nostream deny tcp any any eq 537
    access-list nostream permit tcp any any eq 80
    access-list nostream permit ip any any
    access-group nostream in interface inside
    However, some streaming applications use random ports using auto-configure options that are difficult to block with the PIX. To resolve this issue, you have the second option, using a proxy server to filter the URLs. You may use Websense and any other software to filter web traffic.

  • TS440 Replacement Fan Failure

    I tried replacing all of the fans in the my TS440 with after-market ones from Noctura but only the 92mm  fans worked. The replacement 120mm and 80mm fans would not spin up. However, they would spin briefly when I turned the server off and the 80mm fan would work when I plugged it into the header for  front system fan 1. Anyone seen this issue with after-market fans on the TS440? Fan Size; Connector; Factory Fan; Replacement Fan; Result
    120mm; Rear system fan connector; AVC DS12025B12H; Noctura NF-S12A PWM; FAIL
    92mm; System fan 2 connector; AVC DS09225R12HP235; Noctura NF-A9 PWM; PASS
    92mm; System fan 1 connector; AVC DS09225R12HP235; Noctura NF-A9 PWM; PASS
    80mm; Microprocessor fan connector; AVC DS08025T12U; Noctura NF-A8 PWM; FAIL

    hey there, just got my TS440 and thinking about replacing all my fans with Noctuas as well since stock is pretty loud.
    did you have any luck on getting them to work?

  • Replacement fan for R6850 Cyclone PE

    Hi,
      You may all laugh at the noob who managed to stick his fingers into the brand new fan and break two blades off!!!!
    So my question is can anyone help me source a replacement fan for this little beauty?
    The fan part number is PLA09215B12H and is made by power logic.
    Shame as it was whisper quiet too.
    Any chance MSI might be able to provide one?
    Thanks.
    Mac.

    Quote
    Any chance MSI might be able to provide one?
    call near msi office and have ask, but most probably you will need to send the card for repair.[they will charge you as its psysical damage]

  • Replacement fan for AE2400

    The CPU-fan of my AE2400 is starting to break down (making terrible noise the first few minutes after starting up).
    On-line I can only find replacement fans for MSI laptops.
    Can anyone please tell me where can I find a replacement fan or if there is a replacement fan from a specific laptop model I can use ?

    Ask MSI: >>How to contact MSI.<<

  • Replacement Fan for DV7-1261WM

    Hey guys,
    Recently the top fan on my DV7 burnt out, or went out. I've tried searching around the internet for a replacement, but I'm not really confident on some of the websites I've come across. 
    Heres the fan I'm talking about:
    Any ideas on where I can score a replacement fan? Thanks in advance guys!
    This question was solved.
    View Solution.

    I believe the part you want is number 488885-001, according to the service guide (below)
    You could also try the Intel version....  480481-001.  These can be found on ebay for as little as $5.  The HP parts store seems to suggest that this would also work, they are listed as a part for sale for your model.
    The service manual and repair procedures can be found at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01918142/c01918142.pdf 
    Unfortunately, it's a fairly complicated process to replace the fan.  If you're not a techie or have experience repairing laptops, you might want to check out a HP authorized repair shop.

Maybe you are looking for