Replace g60 modem with voice fax data mpdem

I have a HP G60-23US lap top.
For a special application I need to replace the basic "data/fax" modem with a "voice/data" modem. Where can I find detailed specifications for size of the basic CX 11256 modem so I can look for a replacement.

Hello gerhard38. I understand you are looking for specifications on your modem. These are the best results I could locate on the Internet: http://www.conexant.com/Product/modems/legacy/soft/CX11256/Pages/default.aspx
If these specifications are lacking for you, I would contact the manufacturer and inquire about the exact specifications.
Let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Similar Messages

Adtran with voice and data port

I have an ADTRAN (remote location) with a voice and data port (internet). Does the ethernet port plugs into a serial or ethernet interface?
The provider is telling me to plugg it into a hub...I've never heard of that and was curious if anyone has implemented this configuration before.

Options are limited but include.
1. Get a new SIM card from AT&T and reset your voicemail, see if that helps.
2. Reset your iPhone (holding down the top button and home button for ~10 seconds until the Apple logo appears on the screen).
3. Restore your iPhone. If restoring from backup does nothing then next try restore as new and start over.
4. If nothing else works then call Apple or go to an Apple store and they will replace it.

How can I replace iCloud contacts with up-to-date contacts on my Macmini?

Originally I used iCloud when it first was released. My contacts went into the cloud. I stopped using iCloud and maintained my Contacts on my Macmini. All of my up-to-date information which includes additional contacts and revisions are on the Mac mini. iCloud wants to work with my old information but I'd rather replace the information on iCloud with the information on my computer. How can I replace what's in iCloud with my edited and updated information?

Open Address Book on your Mac, click All Contacts, select a single contact, press Command-A to select them all (they should all be highlightes), then go to File>Export>Export vCard and save this on your desktop. Then delete all your iCloud contacts by going to icloud.com on your computer, log into your iCloud account and open Contacts, click on All Contacts, to the right click on any single contact to select it, click on the gear-shaped icon at the bottom left and choose Select All, then press the Delete key on your keyboard to delete them all. Then click on the gear-shaped icon again, choose Import vCard and navigate to the vCard you saved earlier to import your contacts to iCloud.

Replace save button with update, after data is added in db.

I am forking on a AIR desktop application with sqlite database.
I have a form created in a custom component which have 2 buttons save and update.
I have created a class to handle all database related functionalities.
when i click on the save button of the form, data is inserted into the table.
So far it's working fine.
No when data is inserted in database, i want to disable the save button, and activate the update button on the form. To run the update query i need id of the last added row, which i can obtain from lastInsertRowID on SQLEvent.RESULT event.
My question is how can i pass this ID from my class to the custom component?
Best Regards,
Alok Jain

Hi Alok,
You can create a public bindable property in your custom component. And set this property from a class which handles your DB activitis. You can find explore BindingUtils class if you want to run some function when a particular property value is changed.
Hope this helps.

Replace NULL value with any other data block value

Hi,
I have forms 10g, after query of record on a form I want to replace certain column values if they found Null with any other datablock values I have tried NVL(column_name, :block.column_name) but it give error that no object reference found.
Thanks and Regards, Khawar

Hi,
This is the SQL statement issued by Forms
SELECT RD.REGION_NAME,GL.GRID_CODE,G.GRID_NAME,GL.R_DATE,NVL(GL.R_TIME, :PARAMETER.R_TIME),GL.LOAD_MW,GL1.LOAD_MW,GL.LOAD_MVAR,GL.LOAD_SHED_MW,GL.TEMPRATURE,GL.HUMIDITY,GL.FORECAST_FACTOR FROM grid G, grid_load gl, region_district rd, grid_load gl1 WHERE gl.grid_code = gl1.grid_code(+) and gl.r_time = gl1.r_time(+) and g.grid_code = gl.grid_code(+) and to_date(to_char(gl.r_date(+),'dd/mm/yyyy'),'dd/mm/yyyy') = to_date(to_char(:1,'dd/mm/yyyy'),'dd/mm/yyyy') and to_date(to_char(gl1.r_date(+),'dd/mm/yyyy'),'dd/mm/yyyy') =to_date(to_char(gl.r_date,'dd/mm/yyyy'),'dd/mm/yyyy') - 1 and to_number(gl.r_time(+)) = to_number(:2) and g.grid_code not in ('KBR','BR2') and g.DISTRICT_CODE=RD.DISTRICT_CODE order by rd.Region_name, g.GRID_NAME
I have tried to update those column with other value by checking there Null status in Post-Query trigger but it raises error SQL command not properly ended ORA-00933.
Thanks and Regards, Khawar

Is it reasonable to replace Qwest Pk5000 modem with "Time Capsule" to serve as my modem/local Wifi/backup device?

I am both new and old. That is, I am an old guy who is relatively new to Mac and to forums. I could use some advice, please. I believe I want to buy Apple's "Time Capsule" (TC) to back up my 1 week old MacBook Pro and my old Win 7 Laptop. Currently I have Qwest as my provider. They have installed their ActionTek PK5000 modem.
Question, can I, or better yet, should I replace their modem with TC? I plan to use a wireless network for my home (iPad, wireless printer) and my kids when they come to visit. I believe Qwest won't support TC ... understood, but would it work? and would it be the smart thing to do? If so, would TC need to configured manually or would air port utitlity handle the details? Thanks for any advice. -- tom

tomfromprescott valley wrote:
I believe I want to buy Apple's "Time Capsule" (TC) to back up my 1 week old MacBook Pro and my old Win 7 Laptop.
That's possible, but a bit tricky. Apple's Time Machine software will back up your Mac to the TC, but you'll have to find a Windows app to back up the laptop. I don't do Windoze, but understand the WinClone app may work for that.
Further, mixing Time Machine backups on a TC's internal HD causes some conflicts. See #Q3 in Using Time Machine with a Time Capsule for an explanation and some possible workarounds.
Question, can I, or better yet, should I replace their modem with TC?
No. The Time Capsule is a wireless router with a hard drive. It does not contain a modem.
Usually, you plug the TC into the modem. The TC then provides the network.
But that modem is also a router (ie, provides a network), so you'll need to either turn its router function off, or configure the TC to join the existing network.
If so, would TC need to configured manually or would air port utitlity handle the details?
Either way, you use Airport Utility to configure the TC.

Ibook wifi with usb modem with adsl router

how could you connect the ibook so that it's wireless to the phone line. I'm gonna have to buy all the parts but what's the easiest way to do this ?

To give the iBook G4 wireless the ability to connect to a wireless network, you simply need to install an AirPort Extreme card. The last iBook G4s had wireless built-in.
If you have a ADSL modem without an Ethernet output you will need to replace that modem with a modem that does have an Ethernet output. Then you can buy any inexpensive 802.11b/g compliant wireless router to provide a wireless network for your iBook.

MacBook Pro, BlueTooth Fax Modem with Treo 700p EVDO

MacOSX 10.4.6 w/ all of the latest Software Updates.
I followed the steps below:
1. In System Preferences, go to Print & Fax
2. Open the Printer Browser (click "+" in the Printing tab)
3. Option-click on "More Printers"
4. Select "Advanced" in the popup list
5. Select "Bluetooth-modem" from the "Device" popup that appears
6. Select "Other" from the "Printer Model" menu
7. In the "Choose file" dialog go to System>Library -> Frameworks -> ApplicationServices.framework -> Frameworks -> PrintCore.framework -> Resources -> English.lproj -> Fax.ppd. Note that you can replace English.lproj with the language of your choice.
8. Finally, click Add
Then to FAX...I did the following...
Texedit.App
File -> Print...
and selected the PDF Fax Option.
It acted like it was dialing the fax number (xxx-xxx-xxxx), the Treo 700p lit up like it was receiving the commands, but nothing happened. I couldn 't even get it to dial a normal PSTN number.
Is there something else I need to do?

Apparently there is a fee for using any Treo device as a modem through both Verizon and Sprint. While the easy connectivity of Bluetooth is attractive, most people are interested in attaching the Treo via USB for the data speed transfer factor. After heavy research to attempt to connect my iBook G4 to the internet via the Treo 700p without having to pay Verizon's $15 surcharge, I came across USB Modem. USB Modem supports connecting your Mac to the Internet using the Treo 600, 650 and 700p. And instead of paying $15 monthly, this application is only $25 and offers a free trial to make sure it is compatible with your phone and Mac. But FYI...you have to have the 700p to take advantage of the EVDO broadband network.

Replacing Westell 6100 modem with Netgear Genie

Good day. I'm replacing Westell 6100 modem with a Netgear Genie. I need the following data to complete hookup. Thanks.
Netgear Broadband ADSL2+ Modem (DMP111SP)
IP Address
Subset Mask
Default gateway
Preferred DNS Server
Alternative DNS Server

Since you're plugged into the Westell, use http://192.168.1.1/ to log into the modem. From there, see if your modem shows something along the lines of "Routed Bridge" mode or if it shows "PPPoE" as the connection type. If PPPoE, follow the post I mentioned above. The same goes with Routed Bridge mode. Worst case scenario, call Verizon and have them ensure your Westell is configured correctly if you cannot get online with the Westell, and from there we'll see how the Netgear needs to be configured.
Also, what may have happened here is your Netgear's IP address could have changed. You will want to open up a Command Prompt Window (Start > search for the program "cmd.exe" or go to Start > Run > enter in cmd.exe) and run the command ipconfig. Default Gateway should give the IP of the router you're attached to in a home network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Replace ' with ' in my data using pl/sql

I want to replace all occurrence of special characters like ' with ' in my data using pl/sql.
How can I achieve this?

Thank you for your quick reply. My code is:
DECLARE
firstname varchar2(200) := 'cccc&a p o s;dddd'; ---> Please remove spaces between a p o s. Combine them as apos
lastname varchar2(200) := 'eeee';
BEGIN
dbms_output.put_line('Before changing : firstname :' || firstname);
dbms_output.put_line('After changing: firstname :' || replace(LastName, "'" , "'") );
END;
When I run this in sqlplus, I see:
SQL> @EscapeCharTesting.sql
Enter value for apos:
So I want to change all occurences of "&a p o s;" to CHR(39)

Problem with sharing fax modem on Lion Server

I have a Zoom USB modem attached to a Mini server running Lion Server. The fax works fine when sent from the server. But when I send a fax to the server (as a shared fax) from my MacBook Pro, the fax shows up on the Server queue with no fax number. Within a second the "Status" changes to "Completed". The fax is not sent. Any ideas?

The server system works so leave that alone.
On your client machine try this. My system sees the Zoom as 'USB Modem @ servername'
Delete the entry for your zoom modem from Printers and Scanners. It probably reads something like USB Modem @ servername.
Add your modem again. Instead of Selecting USB Modem @ servername from the list, choose Add other printer or scanner. In the Add Printer dialog box select USB Modem @ servername. Type a new name in the name box. This time use only letters numbers and dashes. Don't use spaces or special characters. It appears that the spaces or special characters is causing the error. On my computer I entered modem-servername.
If this works for you be sure to enter a defect report at apple.

Hardware requirement for voice/fax channel from T1?

Hi all,
I don't know if this is the right forum, but I am looking for validation on my interpretation of hardware requirements.
The scenario:
I currently have a T1 coming in to the facility and terminating into a vendor-supplied Adtran box which splits off one of the channels from the T1 for voice/fax use (the Adtran has a centronics-style connector going to a 66 block)
I am also in the process of ordering ADSL service to supplement the bandwidth for non-business usage.
Rather than end up with a solution involving an adtran, ADSL modem, and router or two... I want to combine all services into a 1751 chassis. My only concern / confusion is how to 'split' off the single voice channel from the T1. There is a phone # associated with the voice channel.
I believe that I will need the router, a multiflex T1 WIC (VWIC-1MFT-T1), ADSL wic (WIC-1ADSL-DG), and an FXS card such as the VIC-2FXS
Am I close here, or completely off base? Any input or suggestions would be appreciated.
Thanks!
-P

Paolo,
Thanks for the reply - I guess I'm just trying to figure out if the way I described is the 'concept' and correct WIC/VWIC combination of how to get an analog dialtone from a T1 channel while leaving the rest for data.
I know there are probably many more benefits to going with a more modern router, but this is for personal use (the T1 is tied to a business account, but hosted in my house and maintained by me) and I can't really get an ISR in my price range - 1751s, on the other hand, are easy to come by and affordable - I just want to ensure I can have a single line available for Fax
Thanks!
-P

Can you use an external antenna with the 4G LTE Router with Voice?

I live in a black hole of cell service - very rural, in a valley surrounded by trees, no DSL, no cable, no other options except satellite internet which I did for 15 years and will never do again. My current data setup is a Pantech UML290 USB modem connected to a Cellphone-Mate full band outdoor Omni 3G/4G antenna on the roof. I just ordered an amplifier to boost the 4G LTE connection. The modem is plugged into a Cradlepoint MBR900 router, which then provides my home internet (way more than 10 devices, and mostly wired).
Is there a way to add the antenna and amplifier setup to the broadband router with voice so I can be assured of the signal? If so, could I then use this router to feed the Cradlepoint and continue using multiple wired devices?
I was set to order this router last night, but the CSR through chat told me that you cannot attach antenna to the router with voice - only to the one with data. This really doesn't make any sense to me, but she was firm about it. If I can attach, can I use the cables I have or will I need a different adapter?
There is so little information about this particular router. My current setup is doing fairly well, but I would love the option to drop my landline and increase signal strength for both voice and data. With no antenna, the modem gets around -125 db, and can't connect at all. With the antenna mounted on the roof, and routed through the Cradlepoint, I consistently get -85 db. 4G LTE speeds are around 15-19 Mb/s down and very inconsistent 2.5-4.0 Mb/s up. However, the 4G drops and resets multiple times a day, so I usually sacrifice the speed to get a more stable 4.5-5 Mb/s down and 0.5 Mb/s up through forced 3G.
Voice calls are spotty if received at all, and frequently drop immediately if there is any connection. And of course, the data limit has been a nightmare. I could potentially save some money by porting my landline to Verizon, but not if there is no way to boost the signals. The Omni antenna will boost all, but not sure if there's any way to route the existing antenna setup to feed both the voice and data sides, or if it would be enough to allow me to do this. This router also says it's 4G LTE only, but the specs on the antenna they sell say it boosts 3G for failover, so not sure if it will grab anything else. Any help or advice GREATLY appreciated! Thanks for reading through the whole thing.

No, not directly. You would need to transfer your data from your iPad to your Mac and then back it up to an external drive.
Pete

Hp laserjet 2840 with no fax

I need a fax and my HP all in one is great, but I installed leopard and now only see modem driver for fax. I need the HP fax. I can print.
Does the HP 2840 fax work with leopard? If not how can I go back to tiger? I regret the leopard, I see little of value in the new system and consider it a waste of time and money to upgrade.
dan

Leopard is great. 10.5.1 is the most stable and excellent version of Mac osx I've ever used and of any platform I've ever used and I use it for everything from music to photos to graphic design, web design, absolutely everything except I don't know scientific stuff all at the same time, including running windows xp and vista at the same time. I have a 2840 printer as well, and it was working fine, until about two days ago it stopped working. I tried to download an up to date driver from HP but their latest revision was october 2006!! Great support for mac users eh! Not very cool. I don't blame Leopard for the break though, it's such a great system, HP should have updated it by now, it's what, 4 months since release?

Replace g60 modem with voice fax data mpdem

Similar Messages

Maybe you are looking for