Replace hard drive and windows 8 software

I want to order a new hard ddrive (640 GB) and replace software and drivers. I found a replcement order for $30+ to replace drivers and software for windows 8. Am I getting the new software to replace the information on a new hard drive, or do I have to order a new windows 8 package?
earl
This question was solved.
View Solution.

Hi,
Where do you get the replacement for $30+ ? Is it a Recovery set from HP ? A Recovery set from HP will have Windows and drivers for your machine which allows you to bring your machine back to factory settings.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New hard drive and Windows 7 issues

I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
or,
2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
I think it would be best to:
Install Mac OS
Download updates
Bootcamp and Install Windows 7
What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.
So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
And: http://www.cirrus.com/en/products/cs4207.html
I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
https://discussions.apple.com/thread/2534313

If I were in your shoes I would want to understand why I couldn't install OSX on the internal drive before going any further. Without getting past that hurdle you may or may not be successful in your aims, but you are outside mainstream intended ways of running Bootcamp.
Just a couple of starters:-
1. Is your internal hard drive (samsung) formatted with a GUID partition table and HFS+ file system? All done in Disk Utility, booted from the Install disk.
2. The Apple Install disk (plus subsequent Apple Software Updates) has all the drivers Bootcamp needs, without having to find and download from elsewhere. I run Windows 7 64 bit on two Macs and have never had to go and find a driver. (Of course Windows does it automatically for me for other hardware). Sorry if this next point is insultingly obvious, but just to check that you know you can put the Apple Install Disk in while running Windows and Windows find the installer.
You don't say anything what your MBP is or what version of OSX you are running. I am not fully up to date with the inplications of Lion and Bootcamp drivers as there is no install disk. I believe 2011 MBPs won't run XP.
Your comment "Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing" implies that you haven't had a Mac very long. Although Macs are easy to pick up and use, there is a LOT to learn about customisation and using it properly and getting the most out of them. I have a number of relatives who still use OSX "out of the box"....it's like driving a car in first gear, and complaining "this car doesn't go very fast". Not a perfect analogy as speed is not the issue here.
Sorry if some of this post is missing the target...just take on board the bits that apply.

How to replace hard drive and transfer everything over?

I've looked everywhere but am unable to find a definitive guide on how to do this.
Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Just Replaced Hard Drive and Time Capsule Suddenly Almost Full

I just replaced my 200GB hard drive (with approx. 165GB used) with a 500GB hard drive. My Time Capsule now shows about 330GB in storage...about my original 165GB x 2. So, I'm thinking that I now have my 165GB from my old hard drive in storage, and the 165GB from my new hard drive.
My question is...how do I correct this?

Was this an internal drive that was replaced? If so, my guess would be that the Time Capsule sees this as a new computer and will backup the contents of the entire drive.
Open your Hard Drive and look for the SHARED heading on the left. Click the Time Capsule icon and a Time Capsule folder will appear in the window on the right. Double click this folder.
You should now see a xxxxx.sparesbundle file for each computer that has been backing up. The sparsebundle file contains the name of your Mac and MAC address. If you see the same listing twice, you will know that the TC has made a new complete backup of your computer.
I haven't experienced your situation first hand, so I'm not clear on whether you will be able to access the "old" backups from your "new" computer. That might be the subject of a new post if that is the case.

Replaced hard drive and getting error

start up failed hard disk smart 0301
and quick scan 0303
i have everything backed up on my external.... this is the 2nd time i replaced the hdd... the 1st time it was under warenty
i have a hp pavillion dv5 -1251nr
i also have the op cd.... it was running vista.... help because i made the mistake of getting a sony netbook and its done for... my only chance to have a working pc is this hp.... and i am going insane without one

Contact the vendor of the new hard drive and request an RMA. Sometimes hard disks are received and the fail right out of the box. The manufacturers and vendors are aware of that. That is always a great reason to keep a receipt.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Macbook Pro replacement hard drive and re-installation of OS X

My son's Macbook Pro (mid 2009) started crashing on boot up and gave a input output error. I have replaced the original 250gb hard drive with a 750gb drive and also upgraded the ram from 2 to 8. Finally I have also replaced the battery. I am using Leopard installation dvd to re-install the software but can only progress as far as the screen 'Install Mac OS X' but there is no disc offered to install it on. By using Disk Utility the only disc shown is the dvd. Pressing the 'New Image' tab I entered 'Save As' 750gb WD HD and 'custom size' as 750 gb. Utility Disk informs me that the disc is only .75mb? Any suggestions to solving my problem and completing the installation program?

Niel, I've checked the connection to the hard drive and all is good but as a check I have disconnected and re-connection the cable to the hard drive and the board. I have also 'listened' to the hard drive and it appears to be spinning. Unfortunately, the Snow Leopard installation disc gets no further with its installation. Are Macbook Pro's of this age prone to cable breaks, or am I using the wrong disc for a full OS X installation, if Snow Leopard is an just as update? Is there anyway to add the drive using Disk Utility and if so how do I do it?

New Hard drive and Window disc

I bought a dv6-6047cl before, and the hard drive is not working now. (No window disc with the laptop)
So i buy a new hard drive,after i put the new hard drive and it shows me
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
What should i do?
Someone told me i should buy a new window 7 Home to RESTORE TO FACTORY SETTINGS. Is that right?
If yes, which CD should i buy? Can you show me the picture?
If not, what can i do?

you download the ISO then you need use the Microsoft tool to make the bootable memory stick or cd.
Use the links in my 1st post for the Microsoft tool & a guide on using it.
Once you have your boot media made you need plug in the usb stick or load the cd & then boot notebook & enter boot option menu & boot from cd or usb drive pending on what you decide use.
A very basic guide on installing windows 7 is in link below, don't follow it blindly, just use it as a rough guide as needed & think twice, do some research or ask questions if hae doubts<>problems ...
http://www.wikihow.com/Install-Windows-7-for-Beginners
Like my post? Click Kudos (thumb+) to show appreciation.

Replacing Hard Driver and RAM

Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
See this knowledge base article for your migration question.
http://support.apple.com/kb/HT1177
Hope this helps
Message was edited by: leroydouglas

Bootcamp - OSx on one hard drive and windows 7 64bit on another hard drive

I have browsed the forum and the net without getting a clear answer
Fact:
With optical bay and two hard drives there is a posibility to use two harddrives within the sam MacBook Pro. The reason is space and speed, I want loads of space to all my projects and i want to use SSD that are not so spacious.
Need:
I want OSx on primary hard drive, and win7 64bit on the drive in the optical bay, replacing the DVD.
Question:
Is there a posibility to set up bootcamp this way, and how does one procede to land in this solution.
Please help me with a clear answer.
// Daniel

Installing on multiple drives of course can be done.
I consider it normal, common sense approach.
Anyone with a Mac Pro (not laptop) or PC.
Dedicated boot drives for each OS.
Dedicated data drives.

G5 Tower, replaced hard drive and now can not get it to work- HELP

My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

Did you reset your PRAM?
command-option- p-r
Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
If it works be sure to check your date and time settings (the system will tell you)
You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
Hopefully that will take care of the problem.

Upgrading hard drive and Windows

I have a X61s Thinkpad with a 100 GB hard drive that is getting full (about 85GB). I plan to buy a larger faster hard drive (probably a 7200 RPM 250 GB Western Digital one from New Egg: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136279
First question; Are there any likely problems with upgrading to this hard drive?
Second, I still run XP and have recently purchased Windows 7 to install. Should I clone existing drive contents to new drive and then change to Windows 7 or install Windows 7 on the existing hard drive and then move everything to the new drive? Or some other scenario?
Finally, do I need to worry about the fall protection on this drive conflicting with the similar system in the laptop?
I'm fairly computer competent, but like it much better when I don't have to muck around inside the settings too much.
Thanks,
nwjhawk

someone else will probablly have to answer as to the compatibility of the new drive. but, as far as installing 7, are you planning an upgrade or do you actually have the os on disc. if you have it on disc, i would probably install the new drive and load the new os right on it. that way you would have your old drive with your old os as a backup just in case anything would go wrong. if you are planning an upgrade then i would clone the old drive to the new drive and do the upgrade on the new drive. active protection and power management should still work the same but there have been a few posts on here concerning buggy drivers. if your display starts freezing or lagging uninstall active protection first and if it still acts up then do the power management. but it should still work okay.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Replaced hard drive and iTunes does not recognize my laptop

My 2011 MacBook Pro froze up and when I rebooted the folder error came up. Replaced hard drive with a SSD drive and my new OS has a new name. When I logged into ITunes I had to delete an account due to my limit being reached. My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00. The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music. Am I missing a step or can I rename my Mac so it will match my old ID? If I rename it can I download my old info off of ITunes?? Thanks

I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online). What account was this and what limit??
Old Mac ID? Your AppleID is what you use to log into the store. It does not change with computers. You always use the same one, perhaps updating the email address from time to time.
By the cloud do you mean iTunes Match?
Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now). That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too. You may have to authorize the computer again. I don't know which part of the computer is used for authentication and if that got lost with the old drive.

Replace hard drive and windows 8 software

Similar Messages

Maybe you are looking for