Replace MiDAS with labview in a high speed camera

Has anyone out there used MiDAS for high speed camera aquisition? The camera came with MiDAS. However the camera can be operated through labview which I'd prefer for better data aquistion. Does anyone have a program for this? Or know somewhere to look? Or help me get started to build my own program.
The camera will be connected to a NI USB 6251
Thanks!
Hova

Let's consolidate these threads into one.
Chris Bolin
LabVIEW Partner Program, CLA

Similar Messages

  • LabVIEW 8.5 high-speed camera

    Hi,
    I'd like to take many
    high-speed images with a camera, and save them to a disk, or my computer's hard drive. I congfigure the camera (it is a Pulnix TM-6740cl camera) with the Measurement and Automation Explorer (MAX.) I take the pictures with LabVIEW. I've found an example program in LabVIEW that is close to what I want; it was written by two members of this forum, N_Holmes and reut. The only differences between that program, and
    the program that I'd like to run is that I need to be able to change
    the shutter speed of the camera (although I believe that I can do this
    with MAX), I'd like to be able to change the target
    directory (for some reason, if I change the directory with the reut
    program, the camera only takes 1 "frame" and stops), and I'd like to be
    able to save a file for each frame taken by the camera (I can only get
    the reut program to save 1 file.) I have LabVIEW version 8.5. If you
    could help me out in any way, then that would be greatly appreciated. Thanks!
    Attachments:
    grab images and Save to FileReut-11.vi ‏67 KB

    Hi Bolin,
    I'm using an NI PCI 1426 with NI-IMAQ, 18MB. Thanks for your previous help. I've actually worked on the program, and I got the camera to take multiple pictures. I also incorporated a part in the program that decodes the raw bayer image that this camera outputs.
    I do have some other questions, though. First of all, I'm not entirely sure what you mean by "trigger." I use the computer to take the pictures; MAX configures the camera, and LabVIEW sends the signals to the camera to take the pictures, and then saves them on the computer. Also, I know this is probably a bad question, but I'm not 100% sure where in MAX I can look to find out what framerate I'm acquiring at. I'd like to acquire pictures at the camera's maximum framerate, which I believe is somewhere over 1000fps. I tried many different methods in order to capture at the maximum framerate, and the best option seemed to be at the settings: manual shutter, shutter setting 0, 4X4 binning. However, my pictures were of extremely poor quality, and they were very dark.
    Also, where can I go in MAX to change the shutter speed? I've tried changing the shutter control setting and the shutter setting number; I just want to verify that this is correct.
    Thanks again for your help! Once I can figure out how to make these pictures take at maximum speed, and at the best quality, then I can finally start on my project!

  • Digital start trigger and high speed camera

    Is there any particular option or way available in LabVIEW to initiate the data acquisition and high speed camera using a digital start trigger? If yes, shall I create a task for high speed camera and then synchronize it with the other tasks?
    Kind Regards, 

    Hi Helen19411,
    The way to trigger data acquisition in LabVIEW is to use the 'DAQmx Start Trigger VI'. To set this up I recommend taking a look at this example: 
    http://www.ni.com/example/25282/en/
    Without any information about the high speed camera you are using, I can't give much advice. If the device is viewable in MAX then you may be able to create a task, and so long as you synchronise both channels in your code, the digital trigger should activate both events.
    Kind Regards,
    TomS
    Applications Engineer
    National Instruments

  • High speed cameras

    not quite FCP related..well, sorta. anyhow, does anyone have any suggestions as far as high-speed cameras (500-1000fps) for outdoor, action-sport usage? i've checked into a few rental houses, and there's a decent variety, but i haven't used one before and don't know if there's a specific one that would work better than another. this would be used on snow (for snowboarding) but in warm temps (40-70 degrees F. You can snowboard/ski on Mt Hood in oregon in the summer, if you're wondering).
    also, is there anything i need to be concerned with when importing and editing this footage in FCP?
    thanks for any help!

    i think, gardner, you're on the bleeding edge here. i can honestly say i've never in my several years here seen this come up.
    my experience with super mo cams are reconfigured studio cams shooting 90fps into discrete r,g,b channels and then fed into an evs for even slower motion. feisty beasts i must say! also, i've yet to see a hd super mo. whenever i work an hd show and there's a mo, it's upconverted to hd from sd.
    i do not have any sort of experience with handheld super mo's like the phantoms from vision research. http://www.visiblesolutions.com/?sector=htm/app&page=products&prodcatid=1
    that being said, if you're working in standard definition, at the end of the day, it has to be ntsc 29.97 fps video, plain and simple. just because something was shot at 1000fps, it's still ntsc 29.97 fps video.
    good luck and i find this interesting so post back with your findings and please post any video you shoot.
    zeb

  • Late 2014 iMac 5K running unusually slowly with fans running at high speed

    Problem description:
    iMac 5K
    The computer is running unusually slowly although it is not experiencing high CPU utilization.
    The computer's fans run at high speed although the computer is not experiencing heavy usage.
    Apple Diagnostics points to SMC problem.
    SMC and PRAM resets have not worked.
    See Etre Report below.
    Thanks for help.
    Herbie49
    EtreCheck version: 2.1.8 (121)
    Report generated 30. März 2015 07:32:40 MESZ
    Download EtreCheck from http://etresoft.com/etrecheck
    Hardware Information: ℹ️
        iMac (Retina 5K, 27-inch, Late 2014) (Technical Specifications)
        iMac - model: iMac15,1
        1 4 GHz Intel Core i7 CPU: 4-core
        32 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM1
                8 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        AMD Radeon R9 M295X - VRAM: 4096 MB
            iMac spdisplays_5120x2880Retina
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:31:53
    Disk Information: ℹ️
        APPLE SSD SM0512F disk1 : (500,28 GB)
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh SSHD (disk1s2) / : 499.42 GB (251.32 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
        Samsung SSD 840 EVO 750GB disk0 : (750,16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Herbies Daten (disk0s2) /Volumes/Herbies Daten : 749.30 GB (299.14 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Application Support/Symantec/AntiVirus
        [not loaded]    com.symantec.kext.SymAPComm (11.1.2f18) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Logitech.Control Center.HID Driver (2.4.0) [Click for support]
        [not loaded]    com.symantec.kext.internetSecurity (1.3.2f5) [Click for support]
        [not loaded]    com.symantec.kext.ips (3.2f8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        ProTec6b: Path: /Library/StartupItems/ProTec6b
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.symantec.uiagent.application.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.symantec.avscandaemon.plist [Click for support]
        [running]    com.symantec.diskMountNotify.plist [Click for support]
        [failed]    com.symantec.MissedTasks.plist [Click for support]
        [loaded]    com.symantec.navapd.plist [Click for support]
        [loaded]    com.symantec.navapdaemonsl.plist [Click for support]
        [loaded]    com.symantec.Sched503-1.plist [Click for support]
        [loaded]    com.symantec.Sched505-3.plist [Click for support]
        [running]    com.symantec.sharedsettings.plist [Click for support]
        [running]    com.symantec.symdaemon.plist [Click for support]
        [failed]    com.symantec.symSchedDaemon.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    de.meilenstein.MSTFirstRunInstaller.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.adobe.ARM.[...].plist [Click for support] [Click for details]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    de.starface.STARFACE-Client.plist [Click for support]
        [running]    ws.agile.1PasswordAgent.plist [Click for support]
    User Login Items: ℹ️
        Notizzettel    Programm Hidden (/Applications/Stickies.app)
        Adobe Reader    Programm  (/Applications/Adobe Reader.app)
        Dropbox    Programm  (/Applications/Dropbox.app)
        SpyderUtility    Programm  (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
        PopChar    Programm  (/Applications/PopChar.app)
        STARFACE Client    Programm  (/Users/[redacted]/Desktop/STARFACE Client.app)
    Internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.5 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 10.1.5 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        RealPlayer Plugin: Version: Unknown
    Safari Extensions: ℹ️
        1Password
        ExifExt
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.2
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Growl  [Click for support]
        Norton\nQuickMenu  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh SSHD: Disk size: 499.42 GB Disk used: 248.10 GB
        Destinations:
            Backups [Network]
            Total size: 6.00 TB
            Total number of backups: 39
            Oldest backup: 2015-01-31 05:27:48 +0000
            Last backup: 2015-03-27 20:28:54 +0000
            Size of backup disk: Excellent
                Backup size 6.00 TB > (Disk size 499.42 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             0%    Dropbox
             0%    SymDaemon
    Top Processes by Memory: ℹ️
        241 MB    Mail
        206 MB    Finder
        172 MB    Safari
        137 MB    Stickies
        137 MB    WindowServer
    Virtual Memory Information: ℹ️
        29.20 GB    Free RAM
        2.79 GB    Active RAM
        721 MB    Inactive RAM
        1.64 GB    Wired RAM
        1.34 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 30, 2015, 06:58:02 AM    /Library/Logs/DiagnosticReports/deleted_2015-03-30-065802_[redacted].crash
        Mar 30, 2015, 06:55:24 AM    Self test - passed

    First uninstall your antivirus. Use only a vendor-provided uninstaller or uninstallation instructions. Never remove files by hand. Never use an "app zapper".
    If that doesn't fix it, take it back to Apple for service.

  • Timeout errors when using high speed camera.

    Hi all.
    I'm currently trying to capture images using a Mikrotron EoSens MC1363 camera at high frame rates >500fps. The issue arises when the region of interest (ROI) is decreased in the microtron software (of which screenshots are attached). The ROI must be dropped in order to increase the fps. When MAX is opened and configured to match the camera settings, and grab is initiated, the timeout error occurs. I've attached screenshots of the mikrotron software, max settings, the error and PC used. The OS is windows 7 64 bit. We use the camera config file for the mono version of the camera which i've been informed will cross over to satisfy the colour version we use. Any questions feel free to ask. Thanks.
    Attachments:
    errors.docx ‏3016 KB
    997-EoSens 3CL-MC1362-Manual.pdf ‏1209 KB

    Hi Dom.
    As you said the maximum frame rate with the ROI set to 1280 x 1024 is 505fps but according to the general information for the camera series:
    The Mikrotron EoSens camera series features extremely sensitive high-speed
    CMOS sensors available in monochrome or in colour with a resolution of 1280 x
    1024 pixels and capture rates of 110 or 500 frames per second. Depending on
    the model the image data is transferred in 8 or 10 bits via either CameraLink
    (Base, Medium or Full) or Gigabit Ethernet.The region of interest (ROI) can be
    freely selected, and the cameras can achieve even higher capture rates up to
    120,000 fps when the ROI is reduced
    Therefore it was my thought that by reducing the width of the ROI increased frame rates may be reached. Realistically we're looking for as high frame rates as possible so that the camera has capability to pass between projects. Currently the moving object enters and leaves the ROI within a 4 frame window, so frame rates of up to 1000fps would generate more data. Naturally, a point will come where the data cannot be physically written as fast as it is generated (>600MBps). Therefore it would be useful to get a handle onto why the error occurs as well as methods to fix it. Hopefully the problem is being discussed between NI and Mikrotron and we may have some answers in the near future.

  • Using the iphone to view a video recorded on a separate high speed camera

    I use a high speed video camera to film athletic motion. Can I play this back on my iphone? The files are in avi format and would I require any adaptors. Thanks, I am very new to using the iphone.

    Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
    No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
    Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor?  Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
    Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

  • High speed camera recommendations

    Looking to aquire 120FPS. Can someone recommend a camera and/or interface that would be very easy to integrate with labview (to decrease dev time)?
    Thanks! 
    At least I have chicken

    Hi labviewleroy,
                              There is'nt much information in your question.Please try to explain it more clearly.
    Thanks as kudos only

  • Accessing high-speed camera

    I have a high-speed firewire camera, model Basler A620fc (max. fps = 100).
    Is it possible to use JMF to capture AVI movie from that kind of device?
    Note that camera must be connected to PC through firewire port.
    Any advice or code sample?

    Download the JMStudio, and see if that's listed as a capture device. Anything that JMStudio can capture from, JMF obviously can capture from.
    If your OS supports the camera, you should theoreticlly be able to use it in JMF.

  • Solenoid Control with LabVIEW

    Hey everyone,
    Im brand new to LabView and I am in need of some assitance. Ive attached a picture of my block diagram setup. I need help with making the LabView code in order to help run this setup. I want to use LabView to activate my photoelectric sesnor, which when tripped will activate my solenoid valve immediately. The maximum allowable time between the photoelctric sensor being tripped to the valve opening cannot be greater than 50 milliseconds. I would also like to active my high speed camera 1 second prior to the electric sensor being activated. I have included the parts I am using in a list below. Thanks for all the help in advance.
    Solenoid Valve: SV-282 from Omega
    Photoelectric Sensor: Comet 14101A6517
    Output cDAQ: NI-9472 (powered by external power supply "NI PS-15 24V")
    Input cDAQ: NI-9421
    Camera: Phantom v7.3 (connected through ethernet)
    In summary: with labview, activate camera, activate photo sensor which when tripped will open solenoid valve immediately.
    Shervin Aslani
    Solved!
    Go to Solution.
    Attachments:
    IMG_20130730_142033.jpg ‏2537 KB

    I'm confused as well.  Why are you sending a signal to a sensor???  Provide power to the sensor all the time and read the digital output from it. Then, send a signal to the solenoid to activate whatever physical action you require when the sensor is triggered.
    EDIT:  One more thing.  Since LabVIEW lacks any sort of time machine functionality you're going to have a fundamental problem activating your camera 1 second PRIOR to your trigger signal.   Usually the answer to that sort of problem is solved by recording the video data constantly in a ring buffer and then when you receive your signal you grab the data.
    Using LabVIEW: 7.1.1, 8.5.1 & 2013

  • Solenoid Valve with Labview

    Hey everyone,
    Im brand new to LabView and I am in need of some assitance. Ive attached a picture of my block diagram setup. I need help with making the LabView code in order to help run this setup. I want to use LabView to activate my photoelectric sesnor, which when tripped will activate my solenoid valve immediately. The maximum allowable time between the photoelctric sensor being tripped to the valve opening cannot be greater than 50 milliseconds. I would also like to active my high speed camera 1 second prior to the electric sensor being activated. I have included the parts I am using in a list below. Thanks for all the help in advance.
    Solenoid Valve: SV-282 from Omega
    Photoelectric Sensor: Comet 14101A6517
    Output cDAQ: NI-9472 (powered by external power supply "NI PS-15 24V")
    Input cDAQ: NI-9421
    Camera: Phantom v7.3 (connected through ethernet)
    In summary: with labview, activate camera, activate photo sensor which when tripped will open solenoid valve immediately.
    Shervin Aslani
    Attachments:
    IMG_20130730_142033.jpg ‏2537 KB

    You're at the fun stage of the project!  You can start to write instrument drivers while (at the same time) learning how to program a state machine.
    I LOVE starting projects   I hate the tedium of finishing them... until they're done, then I love it again.
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Benefit from high speed arrival..........or not ?

    Superfast Cymru, high speed internet, is coming to our exchange, Newport Pembrokeshire. We are 8 miles from the exchange and currently are lucky to get 1 Meg. 
    Will our speed go up "proportionately" with the arrival of high speed, assuming that BT will only cable to a box on the outskirts of Newport ??
    Would be very happy with 3-4 Meg !
    NB - please no feedback on how lucky we are to get 1meg currently given our location (we know).

    Hi Gorillaman,
    Was their a cabient number on the http://dslchecker.bt.com/adsl database for your number?
    EG Exchange xxxxxx is served by Cabinet n
    All three cabinets on the exchange Newport Dyfed exchange are planned to get a FTTC DSLAM cabinet, however it all depends how far you are away from the cabinet that cabinet which will determin if you can get FTTC fibre broadband and what potenitial speed.
    If you can say what cabinet you are on, the community may know where it is and from that you can roughtly estimate what to expect in terms of speed (bearing in mide the your line maybe longer, and line quality will also have a contributing factor) 
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Nikon D2x and High Speed Crop

    Just an interesting observation....
    With Aperture and Tiger, Nikon D2x images shot with the smaller MP High Speed Crop (HSC) mode displayed 24 extra columns/rows (depending on orientation) of pixels; thus an image that should be 3216x2136 showed up in Aperture as 3240x2136. The extra pixels included several rows/columns of garish purple and green pixels than needed to be cropped. This is fine for one image, but not suitable for several hundred (such as shot at a sporting event). In addition to the lack of support for .xmp import, this is one of the most frustrating things about Aperture (for me at least).
    With Tiger this could be traced back (I'm guessing) to Core Image in the OS because other apps using it (such as Preview) displayed similar results. I was hoping for better results with Leopard and was disappointed to find the similar side effect. But I just checked and Preview, iPhoto, etc. no longer show these extra pixels in Leopard, only Aperture. My hope is that Apple will address this in an Aperture update in the near future (perhaps a RAW Fine Tuning 1.2 option).

    I doubt that it's the camera, as the issue doesn't arise on exported pics. That said, as there are only two posts on the forums (yours and the one you refer to on the Aperture forum) it's possible that a: this only arises in very limited circumstances or b: it's local to your computer rather than a bug proper.
    Create a new account (systempreferences -> accounts) and make a library there. Import a few pics and see if the problem is repeated there.
    Regards
    TD

  • Is the Keithley 2612A compatible with Labview 7.1?

    Hi,
    I've got a shiny new Keithley 2612A dual channel sourcemeter and would like to start using it our lab's system.  We are currently using LabView 7.1.
    I found a driver for the 2612A, but it says it's only compatible with LabView 8 or higher:
    http://www.keithley.com/base_download?dassetid=51950
    Does anyone know of another driver, or other method that I might get this thing working in LabView 7.1?
    Many thanks,
    John
    Solved!
    Go to Solution.

    Download it and post it to the Downconvert thread.
    edit - It's a project style driver which was introduced with LabVIEW 8. It might take a little longer.

  • Monthly charge for High speed internet vacation period (suspensio​n)

    I talked to two agents regarding with temporarily suspending my high speed internet service, and I just found out I was getting charged monthly $10 during the suspension periold, which the two agents never mentioned.
    Why did I get the wrong information from the 2 agents even though I made sure with them couple of times I will not be charged during the suspension on the phone. Now I am disconnecting verizon internet service. And I will disconnect my verizon phone service with my wife next year when the contact is over.
    One more thing, I can not file complaint anywhere about this issue in the verizon website, which I found out they made it impossible in their website. Other verizon users mentioned it in the forum. There is no such thing about filing complaint in their company. Good luck.
    Good bye verizon kingdom.

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

Maybe you are looking for