Replace NIC Card

Is it possible to replace the Realtek RTL8111E NIC card in a Touchsmart 520-1000z PC?
A Realtek diagnostic program showed the following:
Link status - Disconnected
On a test, MAC Loopback, PHY loopback, IRQ, FIFO all failed. Wake LAN, type in IP address, nothing happens.
I am guessing that the card is dead.
It does not show up on device manager.
Unable to install drivers.
Thanks
This question was solved.
View Solution.

Hello Hotbowler,
I understand your Realtek NIC is not working any longer and you are inquiring as to whether or not you can replace it. Unfortunately, your NIC is integrated and thus built in to the motherboard. This would make it impossible replace without replacing the entire motherboard. I obtained this information from the HP TouchSmart 520-1000z Product Specifications and Configurable Options page. There are replacable parts in your HP TouchSmart 520-1000x, unfortunately the NIC is not one of them.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

How to tell if nic card is working at 100mb or 10mb??

hello,
subject line says it all.
also, what would be best way to migrate to the open workgroup suite from
sbs6.5??
I'm running everything on one server. would like to add the blackberry
server to the new system. need to run citrix as well (only runs on
windows term server), this would be a seperate box.
would be using win2k3 server for citrix/term server on one box and
another box for running win2k3 with mssql 2005.
Thanks,
Oskar

Anders Gustafsson wrote:
> News novell,
>> subject line says it all.
>>
> Monitor, LAN/WAN, Look at the NIC stats. Almost all NIC drivers will
> report true speed/duplex there
>
> - Anders Gustafsson (Sysop)
> The Aaland Islands (N60 E20)
>
> Discover the new Novell forums at http://forums.novell.com
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
I'm getting max of 104KB per second.
This is pretty slow, isn't it? I think the NIC card on this server is
due for an upgrade. I'm looking at the intel pro server nics.
Any other suggestions? I'm looking for a nic card that is on the HCL
for netware 6.5
Thanks,
Oskar

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

Still getting KP after replacing gfx card & having Genius Bar tests...

I've been getting kernel panics when waking the computer from sleep since 10.5.5 and rampantly since 10.5.6. Soon after my nVidia 6800 started displaying artifacts and would not boot unless under safe mode (in Leopard) or by removing the GeForce extensions all together (in Tiger).
I took it into an Apple store and the Genius desk pop in a new card and it booted fine so obviously that's the problem. Before I made a decision on replacing the card I wanted them to their thorough hardware check to make sure it was only the card and it came back clean.
Since Apple wanted $440 for a refurbished 6800 (that couldn't be found for a couple weeks) I got one off eBay for $300. Pop it in, looks good, reinstall Leopard, upgrade to 10.5.6 and start restoring my backups.
Everything was going fine until I put the computer to sleep last night and the next morning, once again, it fails to wake from sleep. Computer "breaths" to life, but the display is dark. Hard shutdown and I get my familiar kernel panics (this is copied from an old post of mine):
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000020 PC=0x0000000000A4F4E0
Latest crash info for cpu 0:
Exception state (sv=0x60aba500)
PC=0x00A4F4E0; MSR=0x0000B030; DAR=0x00000020; DSISR=0x40000000; LR=0x00A4F4E0; R1=0x606E79E0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00A4F4E0 0x00A50034 0x00A55894 0x00A85DAC 0x00A33CF4 0x00376778
0x0037C1E0 0x0037C330 0x0008F804 0x0002C1C8 0x00024C94 0x000B2E4C 0x00008208
backtrace terminated - frame not mapped or invalid: 0xBFFF69F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.3.0)@0xa16000->0xab0fff
dependency: com.apple.NVDAResman(5.3.0)@0x795000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x77d000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x632000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x757000
Proceeding back via exception chain:
Exception state (sv=0x60aba500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x60aab780)
PC=0x906CF438; MSR=0x0200F030; DAR=0x5292F000; DSISR=0x42000000; LR=0x906D6360; R1=0xBFFF69F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9F33
Kernel version:
Darwin Kernel Version 9.5.0: Wed Sep 3 11:31:44 PDT 2008; root:xnu-1228.7.58~1/RELEASE_PPC
System model name: PowerMac7,3
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B518 0x0009BEBC 0x00029DD8 0x000AF290 0x000B2AF8
Proceeding back via exception chain:
Exception state (sv=0x60aba500)
PC=0x00A4F4E0; MSR=0x0000B030; DAR=0x00000020; DSISR=0x40000000; LR=0x00A4F4E0; R1=0x606E79E0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00A4F4E0 0x00A50034 0x00A55894 0x00A85DAC 0x00A33CF4 0x00376778
0x0037C1E0 0x0037C330 0x0008F804 0x0002C1C8 0x00024C94 0x000B2E4C 0x00008208
backtrace terminated - frame not mapped or invalid: 0xBFFF69F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.3.0)@0xa16000->0xab0fff
dependency: com.apple.NVDAResman(5.3.0)@0x795000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x77d000
After sending an obviously frustrated report to Apple I don't know where to go from here. I was dealing with a woman at Apple's customer satisfaction center. When she gets back to me to check in I'm going to relay this news to her. My initial feelings were this was a bug between Leopard and G5 hardware as others were experiencing it.
<Edited by Moderator>

Here is the actual log from the crash.
Tue Jan 13 05:58:33 2009
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x00000000B3780018 PC=0x0000000074044BA8
Latest crash info for cpu 1:
Exception state (sv=0x63654c80)
PC=0x74044BA8; MSR=0x00009030; DAR=0xB3780018; DSISR=0x00200000; LR=0x740446C4; R1=0x63673200; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x740446C4 0x73EA2C68 0x73E9D69C 0x73EA00B4 0x7407FE7C 0x74084ED4
0x73DD7E4C 0x73DC11AC 0x73DB1344 0x73FC8284 0x73FB99B8 0x73FB7570 0x73DA9928 0x6385C158
0x6385C510 0x6397A14C 0x6385C4E4 0x6397BA20 0x6397BC64 0x0003F9BC 0x000B0E54
Kernel loadable modules in backtrace (with dependencies):
com.apple.nvidia.nv40halppc(5.3.6)@0x74029000->0x7420efff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5b2f5000
dependency: com.apple.NVDAResmanPPC(5.3.6)@0x73da8000
com.apple.NVDAResmanPPC(5.3.6)@0x73da8000->0x74028fff
dependency: com.apple.iokit.IONDRVSupport(1.7.1)@0x6384f000
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5b2f5000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.1)@0x63962000
com.apple.iokit.IONDRVSupport(1.7.1)@0x6384f000->0x63866fff
dependency: com.apple.iokit.IOGraphicsFamily(1.7.1)@0x63962000
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5b2f5000
com.apple.iokit.IOGraphicsFamily(1.7.1)@0x63962000->0x63987fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5b2f5000
Proceeding back via exception chain:
Exception state (sv=0x63654c80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x63d01280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:39:01 PST 2008; root:xnu-1228.9.59~1/RELEASE_PPC
System model name: PowerMac7,3
panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x0009BCF0 0x0009C694 0x00029EA0 0x000AFA90 0x000B32F8
Proceeding back via exception chain:
Exception state (sv=0x63654c80)
PC=0x74044BA8; MSR=0x00009030; DAR=0xB3780018; DSISR=0x00200000; LR=0x740446C4; R1=0x63673200; XCP=0x0000000@

HELP! I need to be able to remove power from a PXI chassis and replace a card without rebooting the whole system

I do not have particulars on the controller, but I am sure it's an NI chassis
and NI regular controller that has a serial cable leading back to the PC.
I am making this PXI rack into a debug rack for instrument cards,
so I need to be able to remove power from just the PXI chassis
and then replace the card with another one
or the same one and then turn the power back on and restart a
diagnostic test on the card WITHOUT
having to reboot the PC.
Is there a PCIe bridge setup that would allow me to do this?
Is there software that I need that can accomplish this?

Yes
The Chassi is a NI PXI 1045
and the controller is a NI-PXI-8331
Let me re-enumerate my requirements:
Background:
I have a number of NI cards as well as other manufactured cards in the system.
One of these cards in the NI system is considered to be a UUT.
That is, I am using the NI card cage system and other cards in the system to test a CARD
during a manufacturing test of said UUT CARD.
The UUT uses a PLX 9030 for it's PCI interfacing.
This UUT is not designed for hot swap, and I do not bieleve it is plug and play.
Requirement:
1. I need to be able to shut off the chassis and remove the UUT when the test finishes, replace the tested UUT
with a unknown UUT, re-apply power and then test the new UUT WITHOUT having to reboot the PC.
I have tried several things, such as disabling the PCIe busses in the windows control panel, and then removing power
replacing the UUT with the next one, re-applying chassis power and then re-enabling the bus and SOMETIMES it works.
I need a very robust way to do this.
I also bought a CHROMA PXI-52906-E extender card with bus switches on it, so that I can remove power to the UUT
without shutting off the chassis. The card is supposedley designed so that when power is re-applied to the UUT, the necessary
signals to boot the PXI PCI interface is conducted, but I think something else has to be written to the card's PCI registers.
I am by no means an expert in PCI/PXI,
but I seem to have exhausted all of my reserach online in how to meet my requirements.
Perhaps there is a way for the NI8331 controller to capture PCI configuration data to the card's on system boot,
and then "replay it" to my UUT after I re-apply power to the UUT?
Or perhaps PLX makes such a tool?
Any ideas?

My iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do???

my iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do??? i leave in diferent country now!!!???(((

in many countries to make phones seem less expensive
carriers pay most of the phones price for the customer
but this come at the cost of the phone only being able to work
with the carrier this is called a sim lock
the only people who can remove a sim lock is the carrier which
the phone is sim locked to they been doing it like that for at least 20 years

Replacement Graphics Card for Macpro 2008 with HDMI ports

I have a Mac Pro 3,1 (2008) 2 x 2.8 Quad core with ATI Radeon 2600 XT Dual DVI.
I would like to replace this Card with something that has at least 1 HDMI out port that supports audio. I want to be able to use download/ iview features to watch TV shows on my HD LCD TV but sourced by the Macs browser.
The Current card only has DVI ports and does not support any audio so when connected to the TV I get picture, but no sound. Not Ideal !
I see that the cards on the Apple store don't have HDMI out.
looking for lots of ideas and experiences.
Ta

I see that the cards on the Apple store don't have HDMI out.
The apple 5x70's have 2 mini-displayports and a dual link dvi port. The 5770 requires one aux power cable and the 5870 requires two.
You can get just as good as the name brands but much cheaper priced adapters and cables through monoprice.com. For example, the mini-displayport to HDMI adapter:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
There are many people who have put a 5770 into a 2008 mac pro. Here's a google search of "5770 in a 2008 mac pro" which shows many discussions of this and even a video.
There's also some discussions on this in these forums as indicated by the More Like This section on the right side of this page.

2 NIC Cards in PowerMac G3 Server running OS X Server 10.3?

Hello all,
I have installed a D-Link PCI Network Adapter, Model #DFE-530TX+, into one of my G3 Servers (Blue and White - Yosemitie) running OS X Server 10.3.
I booted and then installed the driver provided on the vendors CD and then rebooted. I get an error at desktop saying that the driver cannot be used because it was installed incorrectly, although I followed D-Links instructions to the T.
I visited D-Links website and there is a different driver available for Mac OS 10.2x. When I install this one, same error.
Apple System Profiler does not show that there is a card installed in the respective PCI slot. I have tried both remaining slots.
Is there something obvious that I'm missing concerning installation of a secondary Ethernet connection in this machine? I have been told that OS X Server 10.3 doesn't need the driver installed at all, it should just pick it up.
Thanks for any help you can provide.
PowerMac G3 Server-Blue-and-White

A tech friend of mine suggested that I run the MacOSXServerEssentials.pkg located on Disc #2 of the OS X Server installation discs. Since the D-Link card functioned under the client version of OS X 10.3.9, if I ran the OS X Server Essentials package and upgraded a client to a server, it should retain the PCI card information. I tried to run the package and was told that I needed to have a minimum of OS X 10.3.9 client installed. I had not installed the Combo Update, therefore, I only had OS X 10.3.2 client installed. Once updated to 10.3.9 client, I ran the OSXServerEssentials package. Once complete it did not ask for a restart and was still booted into the OS X 10.3.9 client version. I did restart and am glad to report that I am now running OS X Server 10.3.9 with two NIC cards on a PowerMac Blue-and-White G3.
Thanks again for your suggestions,
Kyle

Where can I get a replacement sim card for a sch 1515 v ?

I have a preowned sch 1515 v nexus that I want to activate on my account to replace a moto x that has a cracked screen. It does not have a sim card. can I get a replacement sim card and what size ? or can it be activated without one and work?

bluebdee, Let's get you the SIM card you need for your Galaxy Nexus! As Ann154 mentioned, this phone does use a Micro SIM card and it is available at our corporate stores for no cost. Our Authorized retailers may have the Micro SIMS available, however, there may be a charge for them. Here is a link where you can locate and contact the stores in your area http://bit.ly/3SdsA. Our Customer Service team can order SIM cards for you, as well. 800-922-0204 (*611 from your handset). Let us know if you need anything further.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

How to add a second nic card to non global zone

hi every one
i have a issue like
my non global zone has hme0 as the nic card
i want to add a secondary nic card like pcn0 to the non global zone . how can i add to the nonglobal zone so that both the nic cards should exist in the nonglobal zone
please tell me the command and procedure for that
thanks in advance ....

If your non-global zone is a shared IP zone, then you can add like
zonecfg -z <zonename>
add net
set physical=pnc0
set address=<IP Address>
end
verify
commit
exit
If your non-global zone is an exclusive IP zone, then remember that the interface pnc0 you are adding will be in control of non-global zone exclusively.
Steps to add it are same as above.

Having 2 NIC Cards

I have installed a second network card in my power G4 and I need to configure this card with a static IP; however, there is no where to do this (or at least I can not find it). I have the on board network card configured and working. Any suggestions?
I know if I was running os 10 then I could use UNIX commands to do this however I can not afford to do this at the present time.
Thanks
Power g4 Mac OS 9.2.x

Hi Manikandan,
You can use two network cards but if you installed B1 when this two network cards has been configured to enable, the B1 application run will have slow performance. So, you must disable one of network cards, restart the B1 server and run the B1 again.
If you need the NIC card that is already disable, you can enable again. It won't give slow performance.
my answer is quoted from SAP note 1135705:
SAP Business One takes too long to log on users
Symptom
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
Install the license server on a machine with a single network card.
Disable all network cards, restart the license server and then enable the network cards again.
JimM

3-Com NIC Card Networking Problems on Solaris 10 (x86)

Hi,
I have Solaris 10 OS installed on a PC. I am having trouble getting my machine to ping other machines on the same network. I have executed the following commands:
#ifconfig elxl0 plumb
#ifconfig elxl0 192.168.100.181 netmask 255.255.255.0 up
When I try to ping another machine on the same lan, I don't get a response. I have even did a the sysconfig command and reconfigured my networking and it still does not work. I have tried different network cable as well. I have looked in the master file. I see the driver for my NIC, so I know it is supported by Solaris 10. Can anyone help me?

Here is some more info on my problem and a couple of things I have tried to do to resolve the issue :
I executed the command "prtconf-pv". I found information on my NIC Card, which is a 3-Com 3C905B-TX Etherlink XL 10/100. I found my vendor id - 10b7 and my device id - 9055. I then checked "driver_aliases" file to see if I could find an entry in this file and I did see my vendor id and device id. I would then conclude that Solaris knows my PCI vendor/device-id combination and maps them to elxl driver.
I have also tried a different cable that i know works and still nothing.
I also found from research in Sol. 10 that there is file in addition to hosts, hostname.elxl0, defaultrouter that has to be modifed. That file is ipnodes. I checked the file, and my ip address / hostname is noted in the file. Is it possible I have a bad NIC? I thought about swapping it out for another one that I know works, but it is an onboard NIC. Well, if anyone has and additional info, I would greatly appreciate it.

IP Failover between nic cards, not servers

This maybe a very simple question, I just haven't found the answer to it...
Our Xserve's are running on a Cisco switch and a switch port for the primary NIC card of one AFP server recently failed.
While the server had both cards connected to the switch and the second NIC card was live, the users lost connectivity to the internal server address (internal DNS) as is was pointing only to the primary IP address of that server.
This makes sense as there was no mechanism to tell the server to start using the secondary IP address.
We are now planning to connect all secondary NIC's to a second switch for both the LAN and the DMZ (VLANs) for better redundancy.
The DMZ uses IP addresses only due to port forwarding.
My question is now what is the best way to continue services on a secondary NIC if the first NIC fails.
Add a new DNS entry for the LAN? If so, how? Just enter the secondary NIC IP with the same server name?
Use FAILOVERBCASTIPS for the DMZ?
IP Failover works great between machines, but can the server send heartbeat messages to itself (example: FAILOVERBCASTIPS="NIC1-IP NIC2-IP")?
Is there any way to maintain the mount status of AFP volumes during the switch of IP's (since it's still the same machine)?
Thanks in advance for your help!
Xserve G5 Mac OS X (10.4.3)

Since you're using Cisco switches and are already familiar with VLANs, your simplest solution would be to use link aggregation to create a trunk between the Mac and the switch using both the NICs, then configure VLANs so that both subnets use the trunk interface rather than the physical interfaces.
That way traffic for either IP address can traverse either NIC, and you get automatic failover (thanks to link aggregation) should either NIC fail.
Note that this will only work if you're connecting to the same switch. If you have 'internal' and 'external' switches this won't work without some re-architecting of the network topology.

Load balancing over multiple NIC cards

Is it possible to setup some kind of load balancing at the OS level on a V240 running Solaris 8?
I've got all 4 NIC cards populated (2 each on different subnets with clients coming from both subnets and elsewhere) and I've like to setup some load balancing at the operating system to (dynamically) route the load across the most appropriate interface. Is this possible? I feel I should be getting more bang for my buck here, but I just cant find any info on what I'd like to do.
Thanks for the help.

You can use IPMP in order to have load balancing for the outbound traffic. It's working fine, i have used it on many machines.
Now, if you want to trunk the throughput of your interfaces (for inbound and outbound traffic), you need to acquire sun trunking software. It can truncate up to 8 100Mbps interfaces, or up to 2 1Gbps interfaces.

How to check no. of NIC cards which are available in Solaris 9 server.

How to check no. of NIC cards which are available in Solaris 9 server.
Regards,
Dinesh.

Hi
For list network cards that was sometime registered in system:
grep network /etc/path_to_inst | awk ' { print substr($3,2,length($3) -2 ) $2 } '
ifconfig -a show all network interfaces that curently configured
For check that interface that was listen at first comand available or not: Try
ifconfg <interface_name> plumb
ifconfg <interface_name> unplumb
Do not touch already configured interface or lost network connection.
Regards.

Replace NIC Card

Similar Messages

Maybe you are looking for