Replace Nuance Voice Commands with Google Voice Search

I would like to replace the Nuance Voice Commands with Google Voice Search when i press the call button on my bluetooth stereo headset.
I do not see a way to uninstall the Nuance Voice Commands...
I do not see a way to configure the phoe so that it uses Google Voice Search instead of Nuance Voice Commands...
Factory reset defaults the phone to Nuance Voice Commands...
I would like to press the call button on my stereo headset and have more voice commands than the Nuance app provides. Has anybody found a way to change this behavior without special access?
Sorry my phone is stock and no special access...

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I just tested it here and i get the same result as you but i'm swedish as well.
Not sure if this has to do with how Google Maps behaves in different countries but a Google search is made when you say a voice command that's not recognized by any of the apps you have for the watch. There's a discussion about the "Navigate to" not working here and it seems Google is looking into it.
What i've also noticed myself is that some apps actually give wrong information about which voice command you should use so sometimes you have to try another phrase than the exact one the app is telling you to use.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Sending text with Google Voice

    When I try to send a text message with Google Voice, the new line symbol on the key board (bottom right corner of the keyboard)  changes to a weird :-) character but only when I am in the body of the text, it is OK in the the address line. It has been suggested that I i try not filling in the address line when I compose the message but that didn't work. Any ideas?

    It's been debated over and over ad infinitum whether text messages need formatting or not.  The only reason for a newline is to format text messages.  I'm of the old school, just type in a text message and send, no formatting.  The "weird :-)" is an emoticon denoting what it sounds like, emotions.  In this case a smile.

  • Google Voice App show Google voice number when dialing out?

    I switched from the iPhone to Android because I can call out of my Android phone and the recipients see my Google Voice number.
    Is this possible with Google Voice for the iPhone?
    Thanks,
    Phil

    So after exhausting countless hours I just added the App "Google Search".  It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often.  Better than not having Google Voice at all.

  • When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

    When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

    Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

        Rodilator,
    We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • How to sync contacts with Google Voice?

    Hey everyone, I'm pretty new to the Desktop Software and need a little help.  I have had my bb for over 2 years now, but I have never used the DT software for anything but a full back up do a full reset of my phone.
    So he is the situation.  I just signed up for a Google Voice account and replaced my sprint voicemail with the google voicemail.  I want to add all my bb contacts to my gmail/google account but I don't want to do it manually.  To sum things up, here are my questions (the ones that I think would solve my problem, but feel free to let me know if I'm venturing down the wrong path at anytime)
    1) Is there a way to set the DT software to use Gmail/google as the application for Address Book?  Right now I'm just using the Windows 7 Contacts.
    2) If I can't use Gmail directly, is there another application that the DT software can link to that will save all the contacts as CSV files, and then I import them to Gmail that way?  I believe Windows 7 saves them as a .contact file and Gmail says the format is invalid?
    3) How do I add applications to the DT software that are available to sync the organizer data with?  Currently the only options I have are Yahoo, Windows 7 Contacts, ASCII, and a 4th that I don't remember at the moment.
    The usb port on my phone is going bad, so I have to do a balancing act it the cable in order to get the computer to even recognize that the phone is connected, so I really would like to get all my contacts into my Gmail account in case I have to get a different type of phone.... My patience is running thin waiting on the new Bold LOL
    Any help would be appreciated.
    Thanks

    Hey dcdarrencrosby,
    Welcome to the BlackBerry Support Community Forums.
    You will not be able to use the BlackBerry Desktop Software to synchronize your contacts from BB to Google.
    However if you have a Gmail account added on the BlackBerry, there is a wireless sync option that can bring your contacts over.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • How do I use voice commands with CC on my Mac?

    Howdy all! Just made the switch to Adobe from Final Cut 7. Overall, I'm digging it a bunch.
    However, there's one aspect of CC on my Mac that's vexing me.
    As you may know, there is speech recognition / voice command software built in to Mountain Lion (it's been around for years, and many iterations of OSX). With this software, you can make any number of custom voice commands for another piece of software. For instance, in FCP 7, I can program the keystroke "l" (play track) to respond to the voice command, "Forward." (It can be any word or phrase you type in.) This works with other programs as well.
    All well and good, and pretty dang cool. However, I can't make any voice commands work with any of the CC software (I've tried Premiere and Media Encoder so far). I'm curious if anyone else has had any luck, or, perhaps, that the ported interface from Windows to Mac has some layer of code that (probably inadvertantly) blocks voice commands from working with CC on a Mac.
    Anyone got any tips? Tricks? Confirmation that this simply won't work on a Mac? (If the last, I'd love to know the "why" as well.)
    Thanks!
    Best,
    Ian
    2009 Macbook Pro, 2.8Ghz Intel Core 2 Duo, 8GB 1067 MHz DDR3 Ram, 1TB 5400 RPM hard drive, OSX 10.8.4.

    There are none.
    iPad has dictation only-no commands.

  • WHY---------???? WHY can't I use my bluetooth for voice commands with the driods?

    I purchased a droid1 and found out very quickly that my bluetooth COULD NOT BE USED WITH THE DROID OR VOICE COMMANDS-----IT IS NOT A HANDS FREE DEVICE!! I paired my bluetoot with the droid and expected to make calls as I did with my OLDER phone but NOPE-----IT WILL NOT WORK-------YOU HAVE TO "TOUCH" THE DROID TO MAKE A CALL BEFORE YOU CAN TALK VIA BLUETOOTH! WHAT ARE THESE PEOPLE THINKING? A basic function (AND LEGAL) like voice command calling wasn't put into these driods? PLeaase..........what--why-----how-----could they overlook such a basic and legal requirement (MOST STATS REQUIRE HANDS FREE OPERATION)..............I'm baffled and extremely disappointed because I can not use any of these 'smartphones'=droids.
    Be very careful before you buy one without being informed of this flaw--------the DROIDS are not HANDS FREE DEVICES--------sadly.

    I had the same shock when purchasing 2 new Droids less than a month ago. The store rep emphatically told me that Bluetooth dialing worked but of course that was wrong. The Froyo 2.2 version corrects that -- if you haven't received an update notice from Verizon you can get it here: http://www.droid-life.com/2010/08/03/manual-android-2-2-update-for-motorola-droid/  and do it yourself. it's pretty simple.

  • Can't use keyboard with google voice after 1.3.1 update

    Prior to 1.3.1, when I received a call via Google Voice, when prompted with the option to "1 take the call, 2 send to voicemail etc" I could just slide out the keyboard and hit which ever number I wanted. Now, (after 1.3.1) the keyboard seems unresponsive, and I must manually: 1) switch to keypad view 2) select the key I want.
    Is anybody else experiencing this? Or has anybody already filed a grievance under the feature request section of the Palm site?
    Thanks!
    Post relates to: Pre p100eww (Sprint)

    Hi there,
    I am getting voice prompts to: "press 1 to take the call, press 2 to send to voice mail etc". My "1" key works just fine. It is more the delay in my ability to use it that is different between 1.2.1 and 1.3.1
    Previously, I could press the key and it would work right away. I could pick up the call, or send to voicemail, etc.
    Now, I press it and nothing happens, however, by the time the voice prompt returns to repeat my options, my keyboard starts to work..
    I hope that's more clear!
    Thanks!
    Andrew

  • Possible to make calls with Google Voice account through iChat?

    I have a Google Voice account (have for a while now), which allows me to make calls through VOIP. I've recently lost phone service and have noticed that an option when making calls in Google Voice is through Google Chat.
    Now, I can never get Google Chat to work on my Macbook, so I was wondering if anyone knew of a way to get it to work with iChat.
    I have signed into my Google account through iChat, but when I make calls in Google Voice and I select to call through Google Chat, it says "Calling You" like it would if I were using my phone as the proxy, but it doesn't do anything.

    I think I figured out how I want to do this.
    For others in similar situations (this is assuming you HAVE a Google Voice account, which they don't give out anymore, AFAIK), go to http://www.google.com/talk/ and download the plug-in on the left. Install it, then open up your gmail in browser. On the left side, there will be a section that can let you make calls directly from your computer. SUCCESS!!

  • Sbh52 with google voice

    Hi, I just got the sbh52 and trying to set it up with my google voice account as I use google voice for messaging and for calls, have googled but no luck.
    Question:  Have anybody on the forum was able to achieve this?
    Thanks.

    forget to mention that i am using sbh52 with Note 3

  • WARNING: iOS upgrade pitfall: iCloud Keychain deleted because incompatible with Google Voice

    If the SMS-capable phone number you provided when you first set up iCloud Keychain is a Google Voice number, the verification code Apple tries to send via SMS to this phone number will not arrive. When I contacted Apple Support, after upgrading my iPhone to 7.0.4, because I did not get the verification code, they did not help me complete iCloud Keychain setup, other than to guide me through steps that would delete my keychain and force me to start over.)

    At some point, you reset your keychain to default in Keychain Access. That caused your login keychain to be renamed.
    Back up all data.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Keychains
    In the Finder, select
              Go ▹ Go to Folder... 
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
    Back in Keychain Access, select  
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

  • Droid 2 Global with Google Voice

    When making internation calls via google voice app on Droid 2 Global, the calls were routed through Verizon. End up with huge international bill. Please help Verizon......
    .I Do Nott have international calling plan with Verizon and didn't know the internation calls were allowed to make. in the past Verizon always block internation calls.

    Droid2UserVZW wrote:
    When making internation calls via google voice app on Droid 2 Global, the calls were routed through Verizon. End up with huge international bill. Please help Verizon......
    .I Do Nott have international calling plan with Verizon and didn't know the internation calls were allowed to make. in the past Verizon always block internation calls.
    I have sent you a private message to further assist you. Please check your message inbox.

  • Google Voice APP and Google Voice will use cell phone minutes.

    My Verizon contract has 1400 minutes shared with 3 cell phones. I noticed that my cell number was using minutes from the calling plan. I normally call the other two cell phones, and my home number (which is on my friends of family calling list). My original intention was to be able to hide behind Google Voice and not allow my cell phone number to be broadcast. Google Voice would use whatever phone number was available on their server, make the call, then connect with my cell phone to complete the connection. I didn't notice that my minutes were being used until after someone else reported that they had exceeded their plan minutes after switching their cell phone to use their Google Voice number for outgoing calls.
    I called Verizon concerning this issue, and their only response was to contact the third party.
    I have now, and informed my friends, to only use their number and change the Google Voice APP, Making Calls setting to "Do not use Google Voice to make any calls".
    Just thought others would like to know.

    As an example of the comparison: http://searchunifiedcommunications.techtarget.com/feature/Skype-vs-Google-Voice-Feature-by-feature-s...

  • CPU maxing out with Google Image search, some other websites

    When I try to use Google Image search or load SBNation website articles, Firefox's CPU usage maxes out and it becomes unresponsive for a good 10 seconds before it has loaded everything. This is a new problem that has popped up within the last few weeks.
    I've tried disabling all addons and plugins, removing cookies, clearing cache, downgrading from the beta version to 23 and none seem to make any difference.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for

  • Report using internal table events

    Hi, i have an internal table with  the fields 1. profitcenter 2. company code 3. gl account 4. amount for each profit center i need to seggregate accounts based on company code. the report should look like the one below. please suggest some code usin

  • Adding fields 2 standard payment list program  (RFZALI20)  in F110 t-code

    hi frnds, it is a standard progrm using the logical database pfy. to retrive data. i have to add 5 more fileds  along with footer approved by and page break(shown below) to the output list. please help me with ur inputs. Header Data: *Note: Keep the

  • Re-Starting 9.2 Download?

    I downloaded 9.2 (again) this morning around 8:30 from that link. But I had to go out at 1:00 and it said I still had 2 hours to go. So I aborted and turned off my Mac because I didn't want to leave it running. When I came back and booted up, that li

  • Insalled 10.4.4 and now can't print

    I had two printers installed on my PowerMac G5, a Samsung ML-1740 and an HP 2600 Photosmart. After I installed 10.4.4 today when I attempted to print to either they would just hang. I finally reset my printing system and reinstalled drivers for both

  • Tool to test Webservices using SwA (Soap with Attachements)

    Hi All, I generally use the took xmlspy to test any webservice. But now i am working with a webservice that is using SOAP with Attachemtns. it seems we cannot use xmlspy to test/invoke webservices that use soap with attachements. is there any tool by