Replace obsolute Variants - Program Dump
Hi
My upgrade is from 3.1h to ECC 6 .
After upgrade when i run the program RSVARDOC_610 it goes for dump.
Is your program working when you run with no inputs given in selection screen.
My Error is
Runtime Errors CONNE_IMPORT_WRONG_FIELD_LENG
Except. CX_SY_IMPORT_MISMATCH_ERROR
With Regards
Kamesh
kamesh,
there should be surly an OSS on this.
here some OSS i found see if these are help:
39290,1156437,987914,998098,821522
moreover you need to search OSS surely there would be.
Amit.
Similar Messages
-
Replace obsolute Variants Program Error
Hi
My upgrade is from 3.1h to ECC 6 .
After upgrade when i run the program RSVARDOC_610 it goes for dump.
Is your program working when you run with no inputs given in selection screen.
My Error is
Runtime Errors CONNE_IMPORT_WRONG_FIELD_LENG
Except. CX_SY_IMPORT_MISMATCH_ERROR
With Regards
KameshHi,
It will execute in ECC 6.0, try to give inputs for that program. Hope then it wont give any dump.
Let me know still ur struggling.
Regards
Arani Bhaskar -
Triggering IDoc from R3 using variant program
Hi,
I am using the variant program to trigger the IDoc from R/3 System.
It is successful in r/3 system but its not reaching in XI.
Help me in resolving this issue.
Regards,
Inderdo you find any trace in SM58 ?
Check if there are proper authorizations for the user in the destination.
For authorization;
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT value 16
Authorization object S_IDOCDEFT
Field name ACTVT value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT value 03
Field name DICBERCLS value -
how do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.
reinstall over your current installation and then uninstall, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
or uninstall manually, Manually remove Adobe Creative Suite 2.x | Windows -
About variant program in isu-billing
Hi guys,
Is there any1 who know something about variant program in isu-billing?
My question is: how do the operand communicate with billing schema
interactively? I can't understand the types in the FM of an variant, can
someone explain that to me? or have some materials about it? pls send me.
Thx in advance, points will be rewarded no matter whether it is useful.1.What is operand groups
An Operand group is used to group operands for display purpose in the rate, rate category and installation facts.
You allocate the operands to the operand groups while defining the operand in EA50.
Ex: You can allocate operands 'Ordered Demand' and 'Minimum Demand' to operand group 'Demand'
2.How to define a hierarchy of operand group?
You can assign three levels (Top level, First level and Second level) to the hierarchy of a operand group........
This can be done while defining the operand group itself in ....
SPRO-> SAP Utilities-> Contract Billing-> Billing Master Data->Rate structure-> Operands-> Define Operand Groups.
Ex: You have a upper level operand group ZOPRG and two lower level operand groups ZOPRG1 and ZOPRG2, enter ZOPRG as the upper level operand group for ZOPRG1 and ZOPRG1 as the upper level operand group for ZOPRG2.
Hence ZOPRG will assume top level and ZOPRG1 and ZOPRG2 will assume first level and second level respectively.
3.What is Weighting procedure ,Linear weighting ?
Liner weighting is the fixed linear portion that is added to the other weighting procedure during the determination of the
expected meter reading. You enter the fixed value in the register data during installation or in the rate of the installation structure along with the validity period.
Hope this will suffice!
Regards,
Rajini. -
What are variant programs in SD and MM.
Thanks in adv.
Sandeep.hi the programs which uses the varients are called varient programs......means---suppose the selection screen had 3 fields..matnr meins matrt ..
suppose if you want to test the program with 2 different values ...then we use the varients...
suppose :varient1
matnr 1000 to 3000
meins EA
mtart FULL PRODUCT
suppose :varient2
matnr 5640 to 6572
meins EA
mtart FINISHED PRODUCT
fill all the values and save the selection screen it will creates the varient...
to get the varients check the table TVARV VARID
to get the varient values go to the function module
RS_VARIANT_contents -
Getting a program Dump Error in Herarchial ALV
Hello All,
I am getting a dump error when I am executing the below program. Kindly help as I am not getting the output. However all the subroutines are getting properly populated with data. Getting a dump error while calling the function : REUSE_ALV_HIERSEQ_LIST_DISPLAY
Pasted below are both the question and solution. Copy the solution in SE38 and execute it to check out the dump error.
Kindly help.
Thanks,
Vinod.
QUESTION :-
Objective
Hierarchical ALV for displaying Sales documents per customer
Design
Create a program that will allow the user to display all customers that have placed Sales Orders in the given date range. The user will have an ability to drill-down to see the sales order items per customer.
Selection screen fields
Sales order creation date (range)
Customer number (range)
Output
Header
Customer Number
Customer Name
Total Order value (sum of order values from items below)
Details
Sales order number
Material number
Order quantity
Order value
Reference
Tables: KNA1, VBAK, VBAP
Transaction VA03 (Sales order)
SOLUTION :-
*& Report Z_HALV_32722 *
REPORT Z_HALV_32722 .
TYPE-POOLS: slis.
TABLES : kna1,
vbak.
SELECT-OPTIONS: s_cst_no FOR kna1-kunnr.
SELECT-OPTIONS: s_cr_dt FOR vbak-erdat.
DATA : BEGIN of ty_hdr,
kunnr TYPE vbak-kunnr,
name1 TYPE kna1-name1,
netwr TYPE vbak-netwr,
END of ty_hdr,
gt_hdr LIKE TABLE OF ty_hdr,
gs_hdr LIKE LINE OF gt_hdr.
DATA : BEGIN of ty_ln,
kunnr TYPE vbak-kunnr,
vbeln TYPE vbap-vbeln,
matnr TYPE vbap-matnr,
kwmeng TYPE vbap-kwmeng,
netwr TYPE vbap-netwr,
END of ty_ln,
gt_ln LIKE TABLE OF ty_ln,
gs_ln LIKE LINE OF gt_ln.
DATA : BEGIN of ty_hdr1,
kunnr TYPE vbak-kunnr,
END of ty_hdr1,
gt_hdr1 LIKE TABLE OF ty_hdr1,
gs_hdr1 LIKE LINE OF gt_hdr1.
DATA : gt_fc TYPE slis_t_fieldcat_alv,
gs_fc LIKE LINE OF gt_fc,
gs_k_fld TYPE slis_keyinfo_alv,
gt_layout TYPE slis_layout_alv,
gv_repid TYPE sy-repid.
START-OF-SELECTION.
gv_repid = sy-repid.
perform fetch_data.
perform prepare_fc.
perform prepare_layout.
perform show_output.
*& Form fetch_data
text
--> p1 text
<-- p2 text
form fetch_data .
SELECT kunnr
INTO CORRESPONDING FIELDS OF TABLE gt_hdr1
FROM vbak
WHERE vbak~kunnr IN s_cst_no
AND vbak~erdat IN s_cr_dt.
DELETE ADJACENT DUPLICATES FROM gt_hdr1 COMPARING kunnr.
LOOP AT gt_hdr1 INTO gs_hdr1.
SELECT SINGLE vbakkunnr kna1name1 SUM( vbak~netwr )
INTO (gs_hdr-kunnr, gs_hdr-name1, gs_hdr-netwr)
FROM vbak INNER JOIN kna1
ON vbakkunnr = kna1kunnr
WHERE vbak~kunnr = gs_hdr1-kunnr
GROUP BY vbakkunnr kna1name1.
APPEND gs_hdr TO gt_hdr.
SELECT vbakkunnr vbapvbeln vbapmatnr vbapkwmeng vbap~netwr
INTO CORRESPONDING FIELDS OF TABLE gt_ln
FROM vbap INNER JOIN vbak
ON vbapvbeln = vbakvbeln
WHERE vbak~kunnr = gs_hdr1-kunnr.
ENDLOOP.
endform. " fetch_data
*& Form prepare_fc
text
--> p1 text
<-- p2 text
form prepare_fc .
CLEAR gs_k_fld.
gs_k_fld-header01 = 'KUNNR'.
gs_k_fld-item01 = 'KUNNR'.
CLEAR gs_fc.
gs_fc-fieldname = 'KUNNR'.
gs_fc-tabname = 'GT_HDR'.
gs_fc-seltext_l = text-001.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NAME1'.
gs_fc-tabname = 'GT_HDR'.
gs_fc-seltext_l = text-002.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NETWR'.
gs_fc-tabname = 'GT_HDR'.
gs_fc-seltext_l = text-003.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'VBELN'.
gs_fc-tabname = 'GT_LN'.
gs_fc-seltext_l = text-004.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'MATNR'.
gs_fc-tabname = 'GT_LN'.
gs_fc-seltext_l = text-005.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'KWMENG'.
gs_fc-tabname = 'GT_LN'.
gs_fc-seltext_l = text-006.
APPEND gs_fc TO gt_fc.
CLEAR gs_fc.
gs_fc-fieldname = 'NETWR'.
gs_fc-tabname = 'GT_LN'.
gs_fc-seltext_l = text-007.
APPEND gs_fc TO gt_fc.
endform. " prepare_fc
*& Form prepare_layout
text
--> p1 text
<-- p2 text
form prepare_layout .
gt_layout-colwidth_optimize = 'X'.
gt_layout-expand_fieldname = 'TST'.
endform. " prepare_layout
*& Form show_output
text
--> p1 text
<-- p2 text
form show_output .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fc
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
i_tabname_header = 'GT_HDR'
i_tabname_item = 'GT_LN'
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = gs_k_fld
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab_header = GT_HDR[]
t_outtab_item = GT_LN[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " show_outputEverything looks fine with the gt_layout, it is not an internal table, so no need to append to it, it is simply a structure, but you do tell it that TST is the expand field, but there is no field of this name in your internal for the header, so add it like this.
DATA : BEGIN of ty_hdr,
kunnr TYPE vbak-kunnr,
name1 TYPE kna1-name1,
netwr TYPE vbak-netwr,
<b>TST type c,</b>
END of ty_hdr,
Doing so should make you program work correctly.
Regards,
Rich Heilman
Message was edited by:
Rich Heilman -
Hi gurus,
I can't seem to get rid of following dump in program i've coded... The goal is to get hierarchy father
org. unit of current employee org. unit (IT0001) that has IT1002 (description) with subty = 9000.
Short text:
"Error in module RSQL of the database interface."
Error analysis:
"An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in procedure "%_GET_PERNR" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur,
the current program is terminated. The reason for the exception is:
In a SELECT access, the read file could not be placed in the target
field provided.
Either the conversion is not supported for the type of the target field,
the target field is too small to include the value, or the data does not
have the format required for the target field."
Code sample:
GET pernr.
* various MOVE commends.
* cost center txt
SELECT SINGLE ktext FROM cskt
INTO wa_radnik-l_kostx...
* selection of father org. unit. until correct org. unit is reached,
* correct org. unit is the existence of IT1002, SUBTY=9000
l_orgbase = wa_radnik-l_orgeh.
DO.
SELECT SINGLE sobid FROM hrp1001 " >>>>> THIS IS WHERE DUMP OCCURS
INTO l_nadorg
WHERE plvar = '01' AND
otype = 'O' AND
objid = l_orgbase AND
rsign = 'A' AND
relat = '002' AND
istat = '1' AND
begda LE pn-endda AND
endda GE pn-begda.
IF sy-subrc = 0.
SELECT SINGLE objid FROM hrp1002
INTO l_objid
WHERE plvar = '01' AND
otype = 'O' AND
objid = l_nadorg AND
subty = '9000' AND
istat = '1' AND
begda LE pn-endda AND
endda GE pn-begda.
IF sy-subrc = 0.
wa_radnik-l_n_orgeh = l_nadorg.
CLEAR: l_nadorg,
l_objid.
EXIT.
ELSE.
l_orgbase = l_nadorg.
CLEAR l_nadorg.
ENDIF.
ENDIF.
ENDDO.
thank you,
Tom
Edited by: Tom Baksa on Jan 8, 2010 12:47 PM
Edited by: Tom Baksa on Jan 8, 2010 12:52 PMThere is some problen in your l_nadorg declaration.
try like this.
data: begin of w_kurst_itab occurs 0,
sobid like hrp1001-sobid,
end of w_kurst_itab.
select distinct sobid
into w_kurst_itab
from hrp1001 client specified
where mandt = sy-mandt and
objid in pchobjid and
otype = 'D' and
plvar = '01' and
rsign = 'B' and
relat = '020' and
istat <> '5' and
sclas = 'E' and
begda <= w_endda and
endda >= w_begda.
append w_kurst_itab.
endselect. -
My new program is dumping at the below stmt:
IF NOT gt_soldto1[] IS INITIAL.
SELECT * " kunnr name2 j_3astcu
FROM kna1
INTO CORRESPONDING FIELDS OF TABLE gt_kna1
FOR ALL ENTRIES IN gt_soldto1
WHERE ( name2 LIKE 'STORE%'
OR name2 LIKE 'Store%'
OR name2 LIKE 'store%'
AND land1 = 'US' )
OR ( j_3astcu <> space
AND j_3astcu = gt_soldto1-store_no
AND land1 = 'US' ).
ENDIF. " IF NOT gt_soldto[] IS INITIAL.
Could you please suggest me hwo to correct performane wise?
In order to improve performance I tried to keep as much as possible in where condition. we are using SAP - AFS system.
=============================================
DUMP :
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
Error analysis
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 3704
Number of rows: 230136
Allocated rows: 230136
Newly requested rows: 4 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 199624160
Extended memory (EM)........... 251630992
Assigned memory (HEAP)......... 484209696
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"ZADI_V_R_869_870_STATUS" or "ZADI_V_R_869_870_STATUS"
"GET_DATA_DBTABLES_NEW4"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line SourceCde
4568 DATA : gt_soldto2 TYPE TABLE OF t_soldto1.
4569 DATA : wa_bstnk_storeno_kunnr LIKE LINE OF gt_bstnk_storeno_kunnr.
4570 * Get ztable fields
4571 SELECT * FROM zadi_869_870_sta
4572 INTO TABLE gt_soldto1
4573 FOR ALL ENTRIES IN gt_bstnk_storeno_kunnr
4574 WHERE edi_tr_par = gt_bstnk_storeno_kunnr-edi_tr_par.
4575 ***************************************************************
4576 * gt_soldto1 should contain store no of gt_bstnk_storeno_kunnr
4577 * IF NOT gt_soldto1[] IS INITIAL.
4578 LOOP AT gt_soldto1 INTO gs_soldto.
4579
4580 * READ TABLE gt_bstnk_storeno_kunnr INTO wa_bstnk_storeno_kunnr
4581 * WITH key edi_tr_par = gs_soldto-edi_tr_par BINARY SEARCH.
4582 LOOP AT gt_bstnk_storeno_kunnr INTO wa_bstnk_storeno_kunnr
4583 WHERE edi_tr_par = gs_soldto-edi_tr_par.
4584 gs_soldto-store_no = wa_bstnk_storeno_kunnr-store_no.
4585 wa_bstnk_storeno_kunnr-sold_to = gs_soldto-sold_to.
4586 MODIFY gt_bstnk_storeno_kunnr FROM wa_bstnk_storeno_kunnr.
4587 APPEND gs_soldto TO gt_soldto2 .
4588 ENDLOOP.
4589 CLEAR : gs_soldto.
4590 * MODIFY gt_soldto1 FROM gs_soldto.
4591 ENDLOOP.
4592 REFRESH : gt_soldto1[].
4593 gt_soldto1[] = gt_soldto2[].
4594 REFRESH : gt_soldto2[].
4595
4596 * Get Shiptos from knvp table.
4597 IF NOT gt_soldto1[] IS INITIAL.
>>>> SELECT * " kunnr name2 j_3astcu
4599 FROM kna1
4600 INTO CORRESPONDING FIELDS OF TABLE gt_kna1
4601 FOR ALL ENTRIES IN gt_soldto1
4602 WHERE ( name2 LIKE 'STORE%'
4603 OR name2 LIKE 'Store%'
4604 OR name2 LIKE 'store%'
4605 AND land1 = 'US' )
4606 OR ( j_3astcu <> space
4607 AND j_3astcu = gt_soldto1-store_no
4608 AND land1 = 'US' ).
4609 * AND land1 = 'US'.
4610 ENDIF. " IF NOT gt_soldto[] IS INITIAL.
4611
4612 * Formation new internal table
4613 IF NOT gt_kna1[] IS INITIAL.
4614 LOOP AT gt_kna1 INTO gs_kna1.
4615
4616 LOOP AT gt_soldto1 INTO gs_soldto.
4617
THANKS IN ADV.IF NOT gt_soldto1[] IS INITIAL.
SELECT * " kunnr name2 j_3astcu
FROM kna1
INTO CORRESPONDING FIELDS OF TABLE gt_kna1
FOR ALL ENTRIES IN gt_soldto1
WHERE ( name2 LIKE 'STORE%'
OR name2 LIKE 'Store%'
OR name2 LIKE 'store%'
AND land1 = 'US' )
OR ( j_3astcu space
AND j_3astcu = gt_soldto1-store_no
AND land1 = 'US' ).
ENDIF. " IF NOT gt_soldto[] IS INITIAL.
Hi,
There seems to be some problem with your Where clause.
" j_3astcu space
AND j_3astcu = gt_soldto1-store_no" is not going to lead anywhere.
Please check the Where clause.
Regards,
Nirmal -
DYNPRO_NOT_FOUND in abap program dumps in st22
Hi All,
We are facing an issue in Abap dumps
Run Time error DYNPRO_NOT_FOUND
Termination occurred in the ABAP program "MP058400" - in "SET_INIT_TAB".
The main program was "MP058400 ".
In the source code you have the termination point in line 49
of the (Include) program "MP058420".
I have an idea that it is releated to Screens but its a standard Tcode PA40 and info type 584.
Please suggest the how can i solve the dump.
Regards
Harsha TejaHi Deepak,
We had installed ECC 6.0 Ehp5 recently and released to HCM consultant they are testing PA30 infotype 584.
Regrads
Harsha Teja -
In module pool program dump due to ''too many consecutive nested call scree
i got a dump i found that this is due too many consecutive nested call screens ,i have used call screen
statement in program ,in program once the transaction is completed successfully ,on pressing the ok button ,it will go to the first screen , here where the call screen is executed
so to prevent this dump what shall i do ,plz suggestHi,
Use LEAVE TO SCREEN 0 statement in OK code
Try this. -
hi gurus
i have requirement here .
on selection screen i have file parameter which is like below
EG: /interface//tmp
now my requirement is when i click on variant symbol on selection screen the should be replaced by <SYSID>.
reuired path : /interface/<SYSID(SAP SYSID)>/tmp.
can anyone help on this if anybody worked on this .
<removed_by_moderator>
Edited by: Julius Bussche on Apr 9, 2009 2:09 PMHi,
For this requirement you can check in debugging mode sy-ucomm value when you press the variant button.
And you can use concatenate statement to fetch the file path and then assign the file path to I/O field on selection screen.
Hope it resolve the issue.
Regards,
Nitin -
Programe Dump Issue in Module Pool
Hi,
I am working on screen programe (Module Pool ). i created module user_command_2000 input for screen 2000.
I used Case statements .
When 'Print'
perform print_Page.
Form Print_page includes a report which is another programe , which is having write statements.
when control comes to write statement in Form Print_page .
It gives dump.
Description is :
ist line "-1" not found.
I have to call a TYPe 1 Programe ...PROGRAM ZSRN_SAMPLE2.
call screen 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
case sy-ucomm .
when 'PRI'
perform myform.
endcase.
ENDMODULE.
FORM MYFORM .
data: l_var(20) type c.
l_var = '6'.
export l_var to memory id 'BB'.
submit ZSRMYFORMS1.
ENDFORM.
the below program is type 1 (excutable program)
REPORT ZSRMYFORMS1.
data:l_var(20) type c.
import l_var from memory id 'BB'.
write : l_var.
write: 'hi'. -
Order of Steps replacing older Adobe Program with Upgrade program
I have just purchased 3 copies of Adobe XI Pro windows version to replace Adobe 9 Pro software. I know the last time I undertook an upgrade I had problems with the old software. Initially I deleted the old software but then the upgrade version said I did not have an earlier version. I believe instead of deleting I have to do something else with the program. I have tried to read information on the website I cannot find anything right on point. It should be a easy process which I can replicate with each workstation. Please help
You don't need the old software installed but you do need the serial number from the old software - this will be requested as "qualifying product".
You will probably (but not necessarily) find the install removes the old version. -
Getting the below dump whenever user executes J2IU.
Program : J_1IRUTZ
PERFORM_CONFLICT_UC_STRUCT
CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason?
Thanks in advance
SrideviHi
Here we go!
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
Der Aufruf der FORM "DETERMINE_DEFAULT_VALUES" ist nicht korrekt:
Der Aktualparameter Nr. 2 ist beim PERFORM nicht kompatibel zu dem
Strukturtyp, der von der FORM "DETERMINE_DEFAULT_VALUES" verlangt wird.
Die FORM "DETERMINE_DEFAULT_VALUES" wird im Programm "SAPMJ1II" definiert.
Dieser Fehler tritt unter Unicode auf, wenn die Fragmentsicht der Typen
nicht kompatibel ist.
Maybe you are looking for
-
No stacktraces in JDeveloper 10.1.3.4.0.4270
Since a little while my JDev environment lacks printing stackTraces while running or debugging projects. For example: I have a bit of code which generates a NullPointerException. Normally I would get a stackTrace in the log inside JDev, where I could
-
Multiple SSIDs with Multiple (split) VLANs & GW ---- for shopping mall
Hi Experts, I suppose to sell the shared infrastructure service. Now I'm holding a couple of 8500 (HA). With almost 450 APs. I'm designing my actual WiFi service for this "Shopping Mall" to retails. Each of retail shop should own his AP inside their
-
I purchased the Flash Image Gallery Extension. Installed and created several beautiful working galleries. In my image gallery (link below) there are Category titles 176, 186, etc.. When you click the titles it changes the thumbnail pictures, while th
-
Hi. I know theres an extremely hard chance to get a virus on a Mac but is there anything on a Mac for disk cleanups or wiping out "cache"/ temporary internet files for spyware? I am a new mac user so please help. thanks for your time
-
Hi experts!!! I have developped a WD DC with public part and added a model to this DC's public part. After i add DC (A) to another DC as used i cannot find the model of the 1st DC to use it. Please help!!!!! Thanx in advance P.S. points will be rewar