Replace of Old ITouch with new one?

I have to change my Ipod touch of 2nd generation to the latest one.
Is it possible that I will give this one and take the new one by giving some amount??
Do we have this kind of Facilities in Apple IStore?

Apple will give you a 10% discount is you turn in an old iPod and purchase a new one.
Apple - Recycling Program for iPod and Mobile Phones
You are likely better off selling the old one yourself.

Similar Messages

  • How can I replace my old Airport with new one and keep my network?

    I want to replace my 5+ year old Airport Extreme (runs 802g)
    Would appreciate advice on  how I can set up the new Airport Extreme  and maintain my current network (my printer, Apple Tv etc are all signed into my network, would like to keep my network.
    Is there a way to transfer settings from the older Airport Express to the new one?

    Sorry for confusion; I have a 5 year old Extreme, want to install a new Extreme
    Have an older Express as a range extender ad I have a new Exrpress I would set up likewise
    Cable modem connnected to the Extreme via ethernet cable
    Computers and printer are wirelessly connected to the network

  • HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Replacing Old characteristic with new ones in a Cube

    Hi,
    I have 3 Z InfoObjects for capturing time information like the month, year and week. The user is requesting for variables like current month, current year etc on these variables frequently. I have written customer exit for bringing the current week etc values on the Z InfoObjects.
    However, I want to avoid writing of the code in future and hence have created 3 more InfoObjects which reference to the standard time characteristics, i.e. the Z month InfoObject will refer 0CALMONTH etc. so that the standard variables of 0CALMONTH can be used for our Z InfoObjects also. Now I want to replace the old InfoObjects with these new InfoObjects(the ones referencing the standard time characteristics) in a InfoCube. My question is how do we get the historic data for these new InfoObjects as the Historic data is in the old Z InfoObjects. Any thoughts/suggestions would be helpful..
    thanks in advance.

    <i>Generated export Datasource of the InfoCube after adding the new 3 characteristics. Then in the Update Rules mapped only these 3 characteristics with the old characteristics and did a full upload.</i>
    You need to map the 3 old Characteristics to the 3 new ones, and you need to map all the other InfoObjects too.
    In the following I refer to the 3 old temporal Charactersitcs as T1, T2 and T3 - and to the 3 new temporal Chars as T1', T2' and T3'. The other (old) Chars are referred to as Cn, and the Key Figures as KFn:
    T1 --> T1'
    T2 --> T2'
    T3 --> T3'
    C4 --> C4
    C5 --> C5
    KF1 --> KF1
    KF2 --> KF2
    After the load you should delete the old requests to avoid data duplication.
    <i>I was expecting that the record will have the new characteristic and also the value in it after the load. But it is not happening.</i>
    I reckon you don't have any value because you haven't mapped the Key Figs (as well as severlal Characteristics) in the Update Rules.
    Regards, Davide

  • I replaced an old Itouch with a new one, and now Itunes will not recognize the new one.

    I recently replaced my old I Touch with a new one.  Now I cannot get Itunes to recognize it in my library. 

    See:
    iOS: Device not recognized in iTunes for Windows
    You need iTunes 10.7 or later on the computer.

  • I replaced my old computerwith a new one.  How do I transfer my music purchases to my new computer?

    I had an old Windows XP PC that I had my iTunes library on and I would purchase music through iTunes and it could be shared with my kids 2 iPods and our 2 iPads.  I also have an older 30gig iPod Video that I would sync with my old desktop computer. I did iMatch and have everything stored on iCloud. I bought a windows 8 PC to replace the old desktop and thought that I could simply log into my Apple account with my new computer and essentially "download" my library onto the new computer.  That is not working for me.  I can see all the music listed in iTunes but the text is greyed out and I cannot play any of the music from my desktop.  I deauthorized my old computer and as far as I can tell I authorized my new one.  I cannot see my Purchases music folder on the new computer.  On top of this, my son wiped everything off of his iPod Touch (4th gen) and I am trying to get the games and things I purchased from the App Store reinstalled on his iPod.  Can anyone tell me what I need to do?  HELP!!! LOL

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Replaced my old 3GS with new 3GS

    Hi,
    I had to return my old 3gs with a bad battery and got a new one. I had undated the old one with the new software. When I try to sync the new phone with itune, I get a message telling me that itune was sync with a new version iphone, and I don't know how upgrade the new phone. Does anybody know how to do that?
    Thanks

    Well 2 weeks ago, I updated my old 3gs to the new iphone version iso4 . Before I returned it to Apple store, I backed up my phone and when I try to sync the new phone I get a message saying something like" itune has been synched with a newer version" and I get the choice of starting as a new phone. In other words, the new phone is a 3.0 version and my itune was backed up with a 4.0 phone. I guess I can't ( or at least i don't know how to ) upgrade the new phone to a 4.0.
    Sorry if it's not clear.

  • Replacing the old value with new value on the website

    Hi ,
    I have two input fields CLIN # and PR#.When i enter the text,for the first it is working fine,second time when i enter it is replacing the value which i enter with the first one.I should not replace the old value.
    ex:
    Example when i enter test5 for the first time
    CLIN # :Test 5
    Next when i enter Test6 ,this value replaces the first one
    CLIN#: Test6
    CLIN#:Test6(there is no test5)
    I am doing for my istore application.Any ideas

    As the user that created the anonymous block ruun:
    select count(*) from general_acct_mast_table;
    and
    select tbaadm.count(*) from general_acct_mast_table;I strongly suspect that they are actually two different tables, and the tbaadm version is substantially larger that the non-qualified one.
    In any case I would not be doing this as a row-by-row procedure. I would create two lookup tables like:
    create table masked_general as
    select acid, foracid, round(dbms_random.value(81000000,85000000)) masked
    from (select distinct acid, foracid
          from general_acct_mast_table
          where acct_ownership not in ('O'));
    create table masked_stmnt as
    select * from masked_general;
    alter table masked_general add constraint masked_general_pk
       primary key (acid);
    alter table masked_stmnt add constraint masked_stmnt_pk
       primary key (foracid);Then do the updates as:
    update (select g.foracid, g.acid, gm.masked
            from general_acct_mast_table g
               join masked_general gm
                  on g.acid = gm.acid)
    set foracid = masked;
    update (select s.foracid, sm.masked
            from mini_stmnt_details_table s
               join masked_stmnt sm
                  on s.foracid = sm.acid)
    set foracid = masked;Note that this assumes that both acid and foracid are individually unique in general_acct_mast_table, which seems to be implied by your procedure, and that you want to be able to roll the whole thing back if there are problems (that is, you do not want to commit between the update of general_acct_mast_table and mini_stmnt_details_table).
    I would also probably a a verification step after creating the first masked table to ensire that you did get unique vluaes back fo the masked column.
    John

  • How to replace old ipod with new one

    I have just got an iPhone 64gb as my 32gb iPod touch is full.  How do I transfer the contents from my old iPod to my new iPhone?  It should be simple but doesn't seem to be!

    Thanks.  I think the problem is that the c:drive on my computer is full and so it does not have the capacity to do it.  I have a new computer and have managed to copy the downloads on to the new computer but it won't sync the rest of the music because I think the old device is the registered device.  If that makes sense!

  • Replacing damaged original drive with new one.

    Hopefully I've chosen the correct boad...  Our Pavillion dv6-2173cl hangs after showing the: wallpaper with the Taskbar fame and the Start button, Hp logo button and Date/Time. The cursor shows with the blue'busy' ring for several minutes then the whole thing 'freezes' necessitating the use of the power button on the case to shutdown.  This also happens in Safe Mode.  Hp Daignostics returned an error code of 9077j2-50e656-xd0021(7? sorry wrote it in a bit of a hurry, lol)-6ou103 for the drive test.  We can still get to the disk as a 'slaved' external drive so personal info,settings are available.  Since replacement drive is practically a given, I was wondering about just making the new disk a 'plain' W7disc.  So my questin is "Are the HP programs necessary? Or are they just 'Space Takers"?  I suspect an Overheating problem as the original drivr case has heat discoloration... Probable cause of disk damage... Right?  All we need is a working drive till finances allow purchasing a new computer. Probably Feb. or so.
    This question was solved.
    View Solution.

    That has always worked, I have never had it fail.
     The only thing that I can suggest is to make sure that the key is correct.
      The entire drive has to be deleted to create unallocated space on the entire drive. Just formatting it is not enough. After you create unallocated space let the Windows disc format it automatically, don't do it yourself.
     Here is a tutorial that describes what I am talking about.
     http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
     A place to download the ISO of most version of W7, if you need it.
     http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/

  • Replaceing previous iPod touch with new one...how to Sync?

    Hi, Received a new iPod Touch for Christmas to replace my 2nd Gen version that had run out of memory capacity. My question is...how do I get all of my iTunes library that's on my PC onto the new iPod touch? I want to keep my current iTunes account, just move everything onto the new device? Is it as simple as just plugging it in and naming it the same as the old device? I'm assuming the new serial number will supercede the previous..will that render my previous device useless? I'd still like to keep it for use in the car.

    jwiernik wrote:
    Thanks, do I have to have a archived back-up (i.e. DVD's) of my itunes to do the recovery, or is there an archive on the hard-drive that's hidden?
    every time you synced your old iPod, iTunes should have made a backup. all you have to do is plug in the new gadget and follow on-screen instructions.
    JGG

  • I replaced my old iphone with a new one and i lost it i want the s/n of the new one

    i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
    thanks

    Read here for the various ways to locate the SN:
    http://support.apple.com/kb/HT4061

  • I want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ?

    i want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ? I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money? If not does anyone have another suggestion how not to pay that much money to buy a new one and/ or maybe seling my old one for some money ?
    Thank you would appreciate any help !

    RockayaAbdel wrote:
    I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money?
    No.  but you can sell it privately and use the proceeds towards a newer used model.

  • Replacing a old photo with a new one.

    Using iPhoto right now, would this be something that is easy in Aperture, will switch tomorrow if it works better. A few years back I imported some of my photos off of a photo cd that came with my prints. Now I am scanning the negs at a higher resolution than they supplied on the photo cd. My question is.. is there anyway to replace the old photos with the new photos so that all of my faces, places, dates, keywords etc. will remain intact?

    Also make sure you've renamed the new file exactly the same as the old file, same case, format, etc.
    OT

  • Replace playing video with new one in osmf player

    Hi,
    I have a problem with loading new video in osmf player. First video is loaded from the emmbed code, and I use ProxyElement to comunicate with MediaLEment and to load my plugin. But after some actions in my plugin I need to load another video in the Player. By changing the DisplayedObject from the proxiedElement I am loading the new video but the old video from emmbed code is still runing on the back. Does anyone know how to remove mediaElement created by the player or to replace with new one, ot at least to disable that video from playing. I tried with everything and it doesn't work.
    Thanks

    hi,
    you can change into new Data Source.
    From new Data Source you can load data into the old ods.
    but if you want to kepp the old records as it is, then don't delete data in the ods.
    hope this helps......
    Rag
    Pra

Maybe you are looking for