Replace old Hard Drive with 4TB ones on ix2-dl

I ordered the ix2-dl with two 4TB seagate hard disks (ST4000DM000) which is on the official support list. The hard drive came a couple days later than the ix2-dl. So I tried the ix2-dl with an old 640GB hard drive.
Now ix2-dl seems to like my old 640GB a lot. I could either use it alone or use it with one 4TB drive. It proves that ix2-dl does support the 4TB hard drive. It's just I couldn't use both 4TB together...
When I put two 4TB hard drive in, it ended up with lower light solid blue and upper light flashing red. The LenovoEMC Storage Manager shows the error message "Storage failed and some data loss may have occurred."
The web management screen (http://ix2-dl/manage/restart.html) shows the message "Device Software Restart In Progress. The device is starting up..." It will hang up there forever.
I cleaned the 4TB drive with diskpart in windows 7 before put into ix2-dl. Abd firmware is the latest 4.1.104.31360.
I saw jlamendola get this fixed with factory reset in another thread. But I couldn't really get to the factory reset page in the web management portal... The reset button on the back doesn't help. I even tried to do the factory reset with old 640GB drive and choose shutdown after reset. I could only get there with the old 640GB drive. Then I could switch to 4TB drive. But it still gave me the same error message and red flash light ...

Finally I solved the problem.
I cleaned another 1TB drive by using DISKPART as suggested in manual. I was able to access web management with this drive. Then I choose option of factory reset & Power Off.
After power OFF I replaced 1TB drive with new 3TB (already cleaned) drive. NAS accepted this time. I hope it will run smoothly now onwards. Though problem is solved I still didn't understood why it not worked with my new drive.
Future Improvement :
The software restrction of disabling the management page should be removed, so that in such case user should be able to access management page even if the disk is not present atleast for ix2-dl which has the firmware on device itself & not on hard drive.
Nilesh

Similar Messages

Replacing old hard drive with a new one. HP ENVY DV7 7230us laptop

I am trying to replace my old hard drive with a new one. For some reason it won't do it. I want to perform a clean install with the recovery disks. It seems the only way I can do this is to clone the old one with the new. I have attempted several times and wasted a lot of time trying to use my new drive. Is HP preventing me from doing this for some reason? Is there a work around for this?

Do you know anything about this? Now I am having problems installing the original win8 operating system, (purchased the 3 disk set) on the original hard drive, Toshiba 750g.. It installs up to updating updates but hangs at 13%. The reinstall hasn't even finished. Getting very frustrated. Your assistance is very appreciated.

Replace both Raid 1 hard drives with larger ones.

This computer came set up for Raid 1. I need to replace both hard drives with larger ones. What is the proceedure for doing this?

Hi wweksjk!: Yes you can have 2 HD's with differing capacities as an example on my Xion-MSI PC which was custom built in 2006 I had 2 Western Digital HD's, respectively 160 GB & 250GB divided into 3 partitions
the brand name isn't as important as the rpm the faster the drive spins your computer will be faster
also look at the size of the buffer on the drive as well because the higher the number there will speed up the boot time as well
however installing a new drive as the boot drive will be complex but if you follow instructions that come with the HD installation software it can be done
for example a 7200rpm drive is faster than a 5400rpm but not as fast as either a 10k or 15k model
good luck
hope this helps & enlightens you
Happy Holidays!
spacechild

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

How do I import Bookmarks from my old hard drive to the one in my new mac?

How do I import Bookmarks from my old hard drive to the one in my new Mac? The old drive is installed in Bay 2 of my new Mac.

Hi
Home/Library/Safari/Bookmarks.plist is the file you want. Use a copy, just in case & do it with Safari quit.

I am about to replace my hard drive with Apple. Do I need to format my existing drive to clear my data?

I am about to replace my hard drive with Apple. Do I need to format my existing drive to clear my data?

In my view, definitely. Make sure you have reliable and tested backup of all your important data by way of TIme Machine or a clone (preferably both) so that you can restore once the drive is replaced and then erase the internal drive.

Hp 4530s replace ide hard drive with sata

Would like to replace ide hard drive with a sata in a probook 4530s. any suggestions/information?

Not sure what you mean. It has no IDE hard drive it is SATA.
Look at disassembly video at 1:00 in. That is a SATA hard drive, my friend. Problem solved.
http://www.youtube.com/watch?v=TWkCsrVJFlY

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

How to replace dv6700 hard drive with SSD

Am trying to replace failed HD with SATA SSD, but the pins are different (flat HORIZONTAL on SSD and vertical on original drive). There is no information on removing the black connector. How do I get the new drive to fit?

The dv6700 uses a plastic connector piece over the standard SATA connections on the hard drive. It looks like part of the hard drive but is a separate piece. See the standard SATA connection slots on the bottom and then the brass pins on the top? Carefully remove this plastic piece from the old hard drive and place it on the SSD and you are good to go. If this is "the Answer" please click "Accept as Solution" to help others find it.

MacBook hard drive is full again. Replaced original hard drive with a Samsung SSD 840 Pro Series 256GB hard drive about 18 mo. ago, but my MacBook is now already saying that my hard drive is full again. 13in. Alum. Late 2008 MacBook

My MacBook hard drive is full again. I have a 13in. Aluminum, Late 2008 MacBook, and about 18 months ago (in October 2013), I replaced the original hard drive with a Samsung SSD 840 Pro Series 256GB hard drive. However, my MacBook is now already saying that my hard drive is full again. When I check "System Information," under "Storage," it states the following: Audio 52.02 GB; Movies 33.68GB; Photos 43.13GB; Apps 14.76 GB; Backups 174.4 MB; and Other 96.39GB.
Also, at home, I have an Apple Time Capsule 4th Generation 2TB that I use as my wireless router, and I also use it for automatic backup via Time Machine. And when I first purchased Time Capsule, the first time I connected Time Capsule, Time Machine asked if I would like to use it to back up my files, and I clicked, "Use as Backup Disk." And that's really all I've ever done with Time Capsule.
In addition, I also have a LaCie Porsche Design P'9223 1TB external hard drive. I have copied my MacBook's hard drive onto my LaCie external hard drive.
Does anyone have any suggestions? Obviously the Audio, Movies, Photos, and Apps are taking up a lot of space... Any suggestions re: what I can do with Audio, Movies, Photos, and Apps? And what about the Other? Other is taking up 96.39 GB. What is Other, and what can I do about it?
And what about partitioning my hard drive... Is that something I should do? Should I partition, or configure, my MacBook's internal hard drive differently? And should I partition, or configure, my external hard drive? And if I need to partition, or configure, my MacBook's internal hard drive differently, how do I setup Time Machine to backup per any such changes? Same thing for my external hard drive?
13in. Aluminum, Late 2008 MacBook, 250 GB (with upgraded Samsung SSD 840 Pro Series 256GB hard drive)
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
OS X 10.9.5
plus
Apple Time Capsule 4th Generation 2TB
LaCie Porsche Design P'9223 1TB external hard drive
Thank you for your help.

Partitioning makes no sense. You have a drawer full of stuff. Split it into two smaller drawers and you have two smaller drawers full of stuff.
Decide what you can store on external storage - your iPhoto/Aperture/Lightroom libraries can all be stored on externals, as can your iTunes Libraries and so on. Do you need to carry 30 gigs of movies with you all the time? You can get portable drives the size of an iPhone these days.

How to move files from old hard drive with SATA dock?

I just upgraded my hard drive and now need to transfer the data from the old hard drive to the new. I was told to use a SATA dock but I am not quite sure how to use one. I thought it best to either find out how to use one or find out if there is a better way rather than going about it on my own. How do I solve this quandry?

Click on edit, and then preferences.
Click on advanced, and click on both
keep my song organised and
copy my songs to my itunes library
Now, from your old hard drive, go to your old itunes folder, and drag each artists folder into itunes. You can do it all at once if you have a few artists, but there have been reports of itunes locking up if too much is being is being imported at once

How to share the entire hard drive with only one group

We want to share our entire hard drive with our staff, plus share Web folders with our customers plus the staff. We'd like our customers to have no permissions at all for the share point at the root of the drive, so it won't even be presented as a volume for them to mount.
The problem is that when we make the root of the drive a share point, we need to give read-only permissions to Everyone, or we break services. Read-only for Everyone makes our drive readable by any of our customers, which is obviously not good. This seems like it would be a common task for anyone running a server with customer folders on it. Is there a way to share the whole drive with our staff, and only our staff? Thanks.

First... You are not making your boot drive the share point are you????? Only share an entire drive if the drive is ONLY used for data (not OS).
You need to make mroe than one share point.
You can have one share point which is the Data drive and another share point which is the customer folder within.
You can have share points which exist within share points.
Jeff

Replace old Hard Drive with 4TB ones on ix2-dl

Similar Messages

Maybe you are looking for