Replace print head (not cartridge) on 7250 multi function printer

Rather than trash my 7250 printer that I like, I would like to know how to replace the print head mechanism and a source to buy a print head.
Background: Everything works on the printer except the reds.  Plenty of ink.
No indication from printer on any failure.
Ink ports on both the cartridge and mounting port are clear. Magenta stopped all at once, Light majenta faded out shortly thereafter.
If the print head is not sold as a replacement part, I have a spare Hp 7360 printer from which I could scavenge a print head if necessary.
Anyone have any experience that can give me some pointers on replacing the print head or options other than trashing the printer?
redcatman74

TC (and airport extreme) peripheral support falls into universal (ethernet) and special (usb).
Anything that can be connected to the ethernet port will be translated through the wireless system and work just well (or not well) as it would if connected via ethernet. Devices plugged into the USB port (directly or through a hub) require special support by Apple. Apple writes drivers for these and adds a tab to the airport utility software. This used to be just printers. Currently, this is limited to printers and hard drives. MFCs go beyond the simple printing function Apple is trying to support via USB.
In my case, I have a Brother 7820n MFC. Its designed to operate over ethernet. Plugged into the TC, this means printing, scanning, and faxing (right out the phone jack) wirelessly - from every computer in the house.
Does your MFC offer an ethernet upgrade?

Similar Messages

  • How do I return unopened 564 ink cartridges that do not fit my new warranty replacement printer

    HP replaced my old printer that used 564 cartridges with a warranty replacement printer that does not use the same cartridges.  I was informed I could return the two unopened boxes.  Where do I send them?  How will I get reinbursed?

    Hi there pyesangel,
    Open the Printer Toolbox . There are two ways to do this:
    Open HP Solution Center , select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
    Open Printers and Faxes in the Windows Control Panel , then right-click your printer icon and choose Properties . Click Printing Preferences . Click the Features tab, then click the Printer Services button.
    The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.
    Figure 1: Estimated ink levels
    Give it a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • What can I do and disable for my previous cartridges with protection in a new replacement printer?

    Hi, my previous printer 7610  wasn't in working and I had called the customers service to request a replacement and I just get my replacement printer 7612 yesterday . I would like to using back my previous cartridges whch still have 3/4 , what can I do right now to solve the previous protection for the cartridges? It's still new, somemore there are 4 slots with a rarely use. Should I call the customer service again to get a replacement for these? 

    Once the cartridges have been marked as "protected" they cannot be used in another printer.  I do not think there is any way to disable this once the cartridges have been marked.  I suggest you call HP and see if they can offer a replacement cartridge.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Have an Epson workforce 600 worked fine until new router and Lion installed.  Now when I try and scan with the all in one I get a "POWER PC APPLICATIONS ARE NO LONGER SUPPORTED"  and my IMAC does not recognize that the Epson is a multi function printer.

    Installed a new router.  Installed Lion. Have an Epson Workforce 600 multi function printer.  Two problems. 
    1. I cannot get Lion to recognize that the Epson is a multi function printer.  There is no scan option on the "print/Scan" popup window.
    2. When I try and use the epson scan utility I get:  POWER PC APPLICATIONS ARE NOT LONGER SUPPORTED.
    I have tried EPSON support with no real luck as they say it is Apple upgrades that are the problem.
    Apple support was quite rude..said it was not their problem and that I should call epson.  Told the I did but it made no difference just got the same reply.
    Have no idea what to do.....seems I cannot find out which multi-function printers Lion supports. 

    daolbuzzard1 wrote:
    Epson Workforce 600 multi function printer
    Not to give you another run around, but you need new printer drivers from Epson for your printer so it works in Lion.
    Now it could be that they are working on it, or that they could have decided not to provide new drivers in order for you to force upgrade.
    The only thing a user can do is decide very carefully BEFORE upgrading to a newer Apple operating system, make sure that all their current hardware and software works and make a decision for themselves.
    Since you upgraded to Lion, you can go back to Snow Leopard and your PPC software will work.
    Do you need instructions?

  • Need to print Header Note from Shipment

    Hi gurus
    I need to print the Header Note text from shipment.
    So far I have the following code:
    Include &xxxxxx-tdname&  object vttk id 0003 paragraph IT
    The X's are what I need to define.  Is it VBDKL (although that is Header view for Delivery note) or is there a structure specific to shipment?
    Thx,
    RM

    try if this link helps you.
    http://blogs.oracle.com/xmlpublisher/2009/06/conditional_headers.html
    Thanks,
    Shilpa

  • Install Enterprise WSD Multi-Function Printer does not work for Win10

    Hallo, I installed Win10 three days ago and I am repeatedly getting the same error message.  Can you help? Hewlett-Packard - Enterprise WSD Multi-Function Printer, Multi-Function Printer, Other hardware - Null Print - HP ENVY 7640 series  thanks!

    PAHU wrote:
    There is the pxlmono package, which has a pxlcolor driver that will allow printing in colour, and possibly two sided printing and stapling. But I doubt that you will have hole punch with this driver. Also, the Linux Foundation that provides this driver set was recently hacked and the web site is not back online yet.
    I would echo PAHUs conclusion about the driver you need.  I would also add that the pxlmono/pxlcolor drivers for all Ricoh family of printers (Lanier is a member of the Ricoh family of printers) are actually provided by Ricoh.  They would have all the functionality that your printer supports.  It therefore would support two sided printing if you have a duplexer on the printer.  The driver would also support any hole punching or stapling if your printer is so equipped.
    Also, as PAHU mentions, the OpenPrinting.org site is down right now.  I have all the packages you would need.  The big problem is that the Ghostscript package is about 35 MB in size.  I don't have enough server space to host it.  If you must get the printer working right now, please e-mail me at walterwego at macosx dot com.  I could try to send you the file using an outside file transfer site.
    EDIT:  I just checked the PPDs included in the latest pxlmono package.  The Lanier LD655C is not included in the package.  I don't know which, if any, of the included drivers you could substitute.  It looks like you will have to use the B&W Generic PCL driver until the OpenPrinting site is back up and a Ricoh tech is available to help with suitable model substitution.
    Message was edited by: Matt Broughton

  • Multi function printer/scanner

    I need to buy a printer with scanner functions and other features, I would like something not expensive, just for home use but a model which is fully working with Snow Leopard. A good brand for Mac
    Thanks for suggestions

    Epson does make capable printers, and I have owned an Epson multi-function in the past. In my experience, the Epson printers are noisier and often require a nozzle-cleaning operation that wastes ink. My current Canon multi-function is almost silent and has never required any maintenance operation to achieve perfect prints. It also has two paper trays for additional convenience and does duplex printing. Mine is the MP600, no doubt obsolete. Ink cost is also a bit less for the Canon models that use the common CLI-8 4-color + pigment black ink cartridges. Of course, this is just my experience.
    bd

  • Frozen Keyboard on M1522nf multi-function laser printer

    The keys on my M1522nf multi-function printer don't do anything. The screen shows "Ready" but no key does anything.
    If I turn the machine off and then on again it works normally for a while (not sure when it stops but maybe after an hour or so)
    I have tried unplugging it from the power strip and plugging it directly into a wall socket. I have tried reseting to defaults.
    Nothing has worked so far.
    The machine is not connected to my computer as I use it for copying and faxing only.
    The only thing different is that I recently put a new toner cartridge into the machine (HP)

    the poster's sig line shows 10.5.1 as OS, therefore, yes, they are running Leopard.
    One reason to choose the Brother laser printers is that they do support us and our macs. Their support and driver pages are maintained and up to date.
    PS their wireless printers are great and work with 10.4 and up to 10.5.2 so far. They are truly wireless, set them up once, and then the only wire that they need is their power cord. Any computer (mac anyway) on your lan can print to them without any wire involved.
    (My 2170W did configure totally wirelessly by wifi and I am using it with multiple macs

  • Fax via Network Multi-Function Printer

    I own a HP Multi-Function device to print, scan, fax, etc. My home network is set up to PRINT wirelessly from my computer to my printer, but for some reason I am unable to FAX wirelessly. As of now I must first print the document then fax it manually, when I'd much rather skip the middle steps of printing and just fax it directly using my network. The only way I can send a fax from my computer is bypass my wireless network and plug directly into the HP printer via USB. I think if I can print wirelessly why can't I fax wirelessly too? Any suggestions?
    MacBook Pro
    Latest version of Leopard
    Time Capsule Networked Router
    No Modem
    HP All-In-One Printer/Scanner/Fax plugged into a phone line

    TC (and airport extreme) peripheral support falls into universal (ethernet) and special (usb).
    Anything that can be connected to the ethernet port will be translated through the wireless system and work just well (or not well) as it would if connected via ethernet. Devices plugged into the USB port (directly or through a hub) require special support by Apple. Apple writes drivers for these and adds a tab to the airport utility software. This used to be just printers. Currently, this is limited to printers and hard drives. MFCs go beyond the simple printing function Apple is trying to support via USB.
    In my case, I have a Brother 7820n MFC. Its designed to operate over ethernet. Plugged into the TC, this means printing, scanning, and faxing (right out the phone jack) wirelessly - from every computer in the house.
    Does your MFC offer an ethernet upgrade?

  • Can someone recommend a good multi-function scanner/printer/copier that works with Mac OS 10.6.8?

    I've just purchased a Canon Image Class MF4570dn. Very disappointed to find that whatever I do I cannot get the scanner to work & the Apple support board is of no help.
    It seems like there is a conflict with OS 10.6.8 that does not let the scanner get recognized by any scanning software -- either the Mac native software in Preview or the Canon software included on CD with the box & via download from Canon's site. The Canon software is called "MF Toolbox" but for the life of me I can't get it to start without instantly crashing!
    Any suggestions of set-ups that are working with you on a similar system set-up would be much appreciated!

    This is  discouraging! I ended up trying Canon because my Macbook Pro suddenly stopped recognizing my previous HP scanner -- a MF inkjet printer.
    I have been looking at HP multi-function lasers in lieu of this faulty Canon I just returned.
    I intend to be doing very simple things with whatever MF unti I end upw ith -- no printing or scanning over the network. I'm happy to connect it directly to my computer via USB. So I'm not sure I'd experience the problems you are having.
    Maybe I should go w/ one of these Brother units? Is there anyone on this board that can attest to these machines working with MacBook Pros?
    Brother 7360: http://www.amazon.com/Brother-Printer-MFC7360N-Monochrome-Networking/dp/B004QM99 K0/ref=wl_it_dp_o_npd?ie=UTF8&coliid=I15YVL1HDHBT59&colid=RBYVZUYOZJW
    Brother 7065: http://www.amazon.com/Brother-Printer-DCP7065DN-Monochrome-Multi-Function/dp/B00 4ULP9QA/ref=wl_it_dp_o_npd?ie=UTF8&coliid=I145LC68RYCBED&colid=RBYVZUYOZJW
    Brother 7860: http://www.amazon.com/Brother-Printer-MFC7860DW-Wireless-Monochrome/dp/B004QM99J G/ref=wl_it_dp_o_npd?ie=UTF8&coliid=IK7O05NXDN5B&colid=RBYVZUYOZJW

  • Header note of purchase order.

    hi friends,
    i want to print the header note of purchase order in
    script (which is developed)
    can anyone please tell me the solution
    how can we retrieve this using include object
    thanks & regards
    srinivas.

    Hi ,
    you can include as follows.
    1)go to text editor select insert command option after placing the cursor where you need to insert the text.
    2)Select command button.
    3)in that type as follows.
    /: include &ekko-eblen& object 'EKKO' id 'F01' language 'EN' Paragraph ....
    or type as follows.
    /: include &ekko-eblen& object 'EKKO' id 'F01' language 'EN' Paragraph ....
    Thanks,
    Nethaji.

  • Purchase order reprints when entering header note in change mode

    Hi All,
    We want to use header note in PO as a worklog. PO should not print when a note is entered but whenever we enter any text in the header note in PO change mode, a change output gets triggered and the PO is getting printed. How can we avoid this?
    Thanks
    Deepthi

    Hi Peter,
    Thank you for the reply
    We do have an entry for object EKKO, Text ID F02 for standard document type in operation 1 and 2. Do I have to remove an entry for operation 2 here?. If I remove it, Will it cause problem to other header texts i.e I do not want the PO print only when the header note have some changes. But it should print if any other header text is changed.
    Thanks
    Deepthi

  • Faxing from Mountain Lion with a multi-function printer

    I recently upgraded to Mountain Lion from Lion. Of course, my Apple external modem hasn't worked since the initial upgrade.
    I hadn't done too much about this, but it really is awfully convenient to fax from my computer, vs. printing something out and putting it in the fax machine. (I have a stand-alone one.)
    I DO have a Canon multi-function printer (the MX870). When I set it up (which was a nigthmare) I didn't setup the fax portion because I HAVE a fax.
    But now ... well, I'm tired of not being able to fax from my computer. So I know I SHOULD be able to, but I haven't been able to get it to work. I connected the phone line (it's on a splitter with the other portion going to our comcast cable modem.) But it's not visible via the "add print or scanner" preference. The manual is less than clear.
    Do I need to add some Canon software? I'm not at home now, but I'm thinking I'll try that next.
    Any help wold be much appreciated. I know I could buy a new external modem, but as I'm about to purchase a new Retina MacBook pro, I'd just as soon not!
    (P.S. Perhaps this goes in networking.)

    Yes absolutely.  I set it up last Fall and have been using it until last week, at whick time I lost wireless connectivity with router for no reason at all.  I can not remember how to do it now and I am looking for the answer myself.
    This link to an online chat on www.hp.com with a tech might help you.
    http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=us&h_product=3204781&h_client=S-A...
    I unfortunately upgraded my browser to IE8 last week and the chat support online does not support that browser.  If you get an answer, I would appreciate it if you would post the answer on this thread so that I can re-learn it myself.  Thanks.  Good Luck.

  • Best Multi-Function Printer Software Compatible with OSX

    About five years ago, I surveyed Multi-Function Color Laser/Scanners/Fax, etc.  I ended up with a Brother MFC9840CDW that I loved.  I had tried HP but their software was not as good, and too many features were disabled in OSX.  Brother supported almost everything and was reasonbly reliable.  While the scanning functions remains great, my old reliable Brother is getting a bit long in the tooth in terms of print quality and speed.  I am thinking of upgrading. 
    I would to love to find if anyone has experience with Multi-Function machines, particularly in terms of their software, for OSX.  I just picked up an HP LaserJet Pro 400 M401dw B&W, so not to put too much of a load on my color machine, and frankly, it is boss.  But it is not Multi-Function.  Can those who have experience chime in with who they think has great Multi-Function software for OSX, and even better if they have experience across different vendors to (briefly) compare.  It would be much appreciated.  Much of my focus is on flexibility and ease of scanning. 

    I second your inquiry. My Brother MFC7820N just died after 5 years. Was a great monochrome laser printer, scanner, and fax machine. The software always worked. I wonder how the MFC software of Canon or Epson compares?

  • Multi-function printer compatibility

    I have read in a few places that a multi-function printer (print, scan, fax, copy) will not work with all of the computers on the network plugged in to the USB port of the time capsule
    to anyone that has the time capsule, is this true?
    will all computers on the network be able to print?
    because it is not too crucial for me to be able to scan to and fax from other computers on the network, will the scan and fax functions be usable on at least one of the computers?

    TC (and airport extreme) peripheral support falls into universal (ethernet) and special (usb).
    Anything that can be connected to the ethernet port will be translated through the wireless system and work just well (or not well) as it would if connected via ethernet. Devices plugged into the USB port (directly or through a hub) require special support by Apple. Apple writes drivers for these and adds a tab to the airport utility software. This used to be just printers. Currently, this is limited to printers and hard drives. MFCs go beyond the simple printing function Apple is trying to support via USB.
    In my case, I have a Brother 7820n MFC. Its designed to operate over ethernet. Plugged into the TC, this means printing, scanning, and faxing (right out the phone jack) wirelessly - from every computer in the house.
    Does your MFC offer an ethernet upgrade?

Maybe you are looking for