Replace Report Model with another Report Model for existing reports

Hi All,
I have a report model on which few reports depends and for some reasons I want create a similar report model and repoint all existing reports to new report model. When I am trying to this I get below error. Please help.
An error has occurred during report processing. (rsProcessingAborted)
Semantic query compilation failed: e EmptySemanticQuery The SemanticQuery does not contain any Groupings or MeasureGroups. SemanticQuery must contain at least one of these elements. This typically occurs because the user does not have permission to the items
referenced by the query or the items referenced by the query have been deleted in the underlying model. (SemanticQuery ''). (rsSemanticQueryEngineError)
Thanks,
Jithender

The reports that do work do not use an alias for the table/view name and the ones that do NOT work do use an alias.<br/>
<br/>
I went into the "Database Expert..." screen and modified the alias to the actual name of the view. This resets all the fields as well so they are no longer using the alias either. The data now gets returned properly.<br/>
<br/>
I still need to go into each report and modify them but at least I do not have to recreated all the reports.

Similar Messages

Qosmio X500-10W - Can I replace the HDD with another one?

Hello
I have a Qosmio X500-10W with two HDD Toshiba MK5055GSX 500GB 5400RPM 8MB ??SATA II but is one of hs so I wonder if I can be replaced by a more powerful style HDD 750GB 7200tr / min 16MB Toshiba course?
merci

Hey,
Your question is a little bit hard to understand but I think you want to replace the HDD with another (faster) model, right?
Well, thats no problem. HDDs with 7200rpm will work, they are a little bit louder but they are faster so if you need more performance no problem.
Also 750GB or more is no problem because SATA interface is not capacity limited. Theoretically 1TB or more should also work.
Anyway, you can buy the 750GB you mentioned it will work. :)

I am using two models with diffrent diffrent jcos for that. Is there any pr

Hi,
I am using two models with diffrent diffrent jcos for that. Is there any problem in that ?
Regards,
Gurprit Bhatia

Hi,
JCOs are made per system (R3).
If your two models are calling two different R3 system then it is fine. But if both of your models are pointing to the same R3 system then you should have only one JCO.
This will improve the performance as JCO connections are pooled in the application server and re-used.

HT1338 can i replace my mac with a newest model and pay a difference

can i replace my mac with the newest model and pay a difference>>>

Sorry. No.
Apple does not have a trade-in policy.
Best.

Replacement Path Variable with Another Variable

Hi,
I am currently trying to create a report that would need me to have the same values for different characteristics (e.g. clearing date, posting date, net due date). I have seen that there is a way in the replacement path variable that would replace its value with another variable that is ready for input. I also looked into SAP help but I can't seem to figure out on how to do it specifically. Does anyone know a step-by-step process on how to do this? How does this work?
Thank you in advance!

take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....

How to replace one variable with another in large number of queries

Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!

you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

Replace a string with another string in a file

I have to replace a string with another string. Say for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived path like
"c;\\sample folder\\sample subfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the file.

I have to replace a string with another string. Say
for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived
path like
"c;\\sample folder\\samplesubfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the
file.
public class Buckel {
final static String CONST = "c:\\sample folder\\samplesubfolder\\samplefile.html";
public Buckel() {
public static void main ( String[] argv ) throws Exception {
    int    idx = 0;
    String in = "<a href=\"##\"></a>",   // We'll imagine this just gets here somehow. If it's on the i/p file then take the '\' out B4 and aft the '##'.
           out = "";
    idx = in.indexOf( "##" );
    if ( idx > 0 ) {
      out = in.substring( 0, idx ) + CONST + in.substring( idx+=2, in.length() );
    System.out.println( out );
}

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Have a look at this it might help
http://support.apple.com/kb/TS4148

How to replace a movieclip with another movieclip

How to replace a movieclip with another movieclip
Hi,
I am having a swf called tchild.swf... in this i got a
movclip 'child1'. i am loading this tchild.swf into another swf
tparent.swf within 'mcloader' movie clip.. i got another movclip
called 'picture1'
i am loading tchild.swf into mcloader movclip.. and i want to
load 'child1' moviclip into picture1..
how to replace a picture1 movieclip with child1 mc..
PS: i dont want to load picture1 from library.. its on the
stage.

AWT or Swing?

Replacing multiple spaces with another character

i need to replace multiple spaces with another char in a string
my code is
Dim text as String="a bit much a little much" Dim arr As String() = text.Split({" "c}, StringSplitOptions.RemoveEmptyEntries)Dim newtext As String = String.Join(" ", arr) MsgBox(newtext)
it returns to "a bit much a little much "
But i want to replace only long spaces with "=" as "a bit much =a little much"
How can i do that?

This version uses two spaces to split the string and then trims any additional single spaces. It returns "a bit much = a little much".
Dim text As String = "a bit much a little much "
Dim parts() As String = text.Split({" "}, StringSplitOptions.RemoveEmptyEntries)
Dim newText As String
If parts.Length = 2 Then
newText = parts(0).Trim & " = " & parts(1).Trim
End If

How do i replace my ipad with a new model in itunes?

I'm replacing an iPad with an iPad 3rd generation and will be gifting the iPad to a friend.
What steps do I need to take in iTunes for this to run smoothly?
I want to end up with:
1) The new iPad working but with all of my data, screen layouts and settings from my old iPad.
2) The old iPad "de-registered" (if that's possible/necessary) and reset to factory default conditions with no data present and working on myfriends iTunes account.
Is 1) as simple as backing up the original iPad in iTunes and plugging the new one in and restoring from the old backup? Possible complication: I get the "This iPad is synced with another computer. Do you want to erase and restore..." message whenerver I plug it in, although it does seem to sync when I cancel the "erase and restore" dialog. Would this complicate things?
Re 2), my friend has an iPhone 4 and uses iTunes already. Is plugging in my "wiped" iPad all he needs to do? How do I reset the original iPad?
I hope that these are simple questions, already encountered by many of you, but myself and my friend are at the stage where we have both only had one apple product and have never had to manage another device in iTunes so we just don't know what to expect and don't want to lose any data!
Thanks in advance for your time and help!

Is it as simple as backing up the original iPad in iTunes and plugging the new one in and restoring from the old backup?
Yes
How do I reset the original iPad?
Settings --> General --> Reset --> erase all content and settings;.

Replacing UJ-846 with another brand

Does anyone know if is it possible to replace the UJ-846 (Matshita superdrive) of an intel iMac 17" (1.8Mhz) with a different superdrive model or brand?
People at the Apple Store say you can only install another Matshita superdrive, but as many people in this forum, I'm really dissapointed with this units... Besides, they're charging me almost $300 for a new superdrive which I'm absolutely sure is going to fail again in a couple of months.
So I'm not willing to throw my money away with another Matshita drive. By the way, as I already posted in other thread: Panasonic considers the UJ-846 as officially discontinued.
Is the Pioneer superdrive (shipped in all new iMacs) the same size as the Matshita? Would it work in a 17" intel iMac? Any other suggestion?
I'd appreciate your help.

In September I installed a UJ-846S in my then 5 year old Powerbook and it worked in Tiger with zero configuration and no drivers needed. It also works fine in Leopard. The UJ-85J in the iMac I bought in November is less reliable. I wonder about the orientation of the drive(?)
So although I didn't change brand I certainly didn't have to do anything to get a completely different spec drive to work. Have a read of the experiences on xlr8yourmac.com's drive database:
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso
EDIT: There only seems to be one so far but it was a Sony update that worked. However, I can't see any reason why a Pioneer version wouldn't just work fine either.
mrtotes

Replacing Sony battery with another brand

I have a 2.33 GHz Intel Core 2 Duo Macbook pro that has a Sony ASMB012 Battery that simply dies in a matter of 55 minutes. I know it needs to be replaced but in searching, I only find batteries with other model numbers such as A1175. Will that work as a replacement? It seems ironic that the Apple Store website lists no product number. MacMall doesn't mention the ASMB012 and does not say what their batteries will replace. My 2.33 GHz model is not listed in their compatibilty list. I'm puzzled.
Allen in San Francisco

Hi, sfsinfonia. All 17" MBPs released to date (not including the Jan. 2009 model that isn't actually out yet) use the same battery, which is identified in the McTracker specification database by the number MA458G/A. That identifier and the one reported in your System Profiler are of very limited value in picking a new battery, though, because different manufacturers and vendors commonly use different nomenclature.
Here's one from a reputable manufacturer:
http://store.fastmac.com/productinfo.php?cPath=9_29&productsid=381

I can't find the tutorial on replacing a person with another image from a different photo.

I got an email with a link to a video a long time ago that showed how to remove a person from a group photo and replace this person with an image of them from another photo. It does not seem to be in the videos on my Phtotshop elements 9 list within the program. Does anyone have a link to this video so I can save it and rewatch it? Thanks

Click on the link below and go to: Easily Create the Perfect Photo
It’s designed for several people but it should work with just one person in the shot. After viewing the tutorial open both images in Full Edit and go to:
File >> New >> Photomerge Group Shot
http://www.adobe.com/products/photoshop-premiere-elements/features.edu.html?promoid=GYSZM

Stepping through a query result set, replacing one string with another.

I want to write a function that replaces the occurance of a string with another different string. I need it to be a CF fuction that is callable from another CF function. I want to "hand" this function an SQL statement (a string) like this:   (Please note, don't bother commenting that "there are eaiser ways to write this SQL..., I've made this simple example to get to the point where I need help. I have to use a "sub_optimal" SQL syntax just to demonstrate the situation)
Here is the string I want to pass to the function:
SELECT
[VERYLONGTABLENAME].FIRST_NAME,
[VERYLONGTABLENAME].LAST_NAME,
[VERYLONGTABLENAME].ADDRESSS
FROM
LONGTABLENAME [VERYLONGTABLENAME]
Here is the contents of the ABRV table:
TBL_NM, ABRV    
VERYLONGTABLENAME, VLTN
SOMEWHATLONGTALBENAME, SLTN
MYTABLENAME, MTN
ATABLENAME, ATN
The function will return the original string, but with the abreviations in place of the long table names, example:
SELECT
VLTN.FIRST_NAME,
VLTN.LAST_NAME,
VLTN.ADDRESSS
FROM
LONGTABLENAME VLTN
Notice that only the table names surrounded by brackets and that match a value in the ABRV table have been replaced. The LONGTABLENAME immediately following the FROM is left as is.
Now, here is my dum amatuer attempt at writing said function: Please look at the comment lines for where I need help.
      <cffunction name="AbrvTblNms" output="false" access="remote" returntype="string" >
        <cfargument name="txt" type="string" required="true" />
        <cfset var qAbrvs=""> 
        <cfset var output_str="#txt#"> 
        <cfquery name="qAbrvs" datasource="cfBAA_odbc" result="rsltAbrvs">
            SELECT TBL_NM, ABRV FROM BAA_TBL_ABRV ORDER BY 1
        </cfquery>
     
    <cfloop index="idx_str" list="#qAbrvs#">      
    <cfset output_str = Replace(output_str, "#idx_str#", ) 
    </cfloop>               
        
    <cfreturn output_txt>
    </cffunction>
I'm mainly struggling with syntax here. I know what I want to happen, I know how to make it happen in another programming language, just not CF9. Thanks for any help you can provide.

RedOctober57 wrote:...
Thanks for any help you can provide.
One:
<cfset var output_str="#txt#"> 
No you do not need to create a local variable that is a copy of the arguments variable as the arguments scope is already local to the function, but you do not properly reference the arguments scope, so you leave yourself open to using a 'txt' variable in another scope. Thus the better practice would be to reference "arguments.txt" where you need to.
Two:
I know what I want to happen, I know how to make it happen in another programming language, just not CF9.
Then a better start would be to descirbe what you want to happen and give a simple example in the other programming language. Most of us are muti-lingual and can parse out clear and clean code in just about any syntax.
Three:
<cfloop index="idx_str" list="#qAbrvs#">      
I think you want to be looping over your "qAbrvs" record set returned by your earlier query, maybe.
<cfloop query="qAbrvs">
Four:
<cfset output_str = Replace(output_str, "#idx_str#", ) 
Continuing on that assumption I would guess you want to replace each instance of the long string with the short string form that record set.
<cfset output_str = Replace(output_str,qAbrs.TBLNM,qAbrs.ABRV,"ALL")>
Five:
</cfloop>               
If this is true, then you are looping over the record set of tablenames and abreviations that you want to replace in the string.

Replace Report Model with another Report Model for existing reports

Similar Messages

Maybe you are looking for