Replace Site for Completed Event with Single Page

I created a Muse site for an event that is now over. I want to replace the site with a simple single page that says something like "thanks for participating" but I want to keep the site intact for a future use. What's the best way to handle this?

Hi
You can create a new page with the message and no menu options for surfing the site and then drag the page to replace home page and then upload the site again.
Thanks,
Sanjit

Similar Messages

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Interactivity in Book with single page documents

I'm currently working with a book, with single page documents.
I'm trying to use the interactivity features for buttons in CS5.5
I was able to get pages 2-5 to link to the first page, which we have set up as the table of contents.
However, I'm having issues trying to link button from the 'Table of Contents' to the single pages of the book.
For example, I have a button that, once click will take you to page 2, and another button that will take you to page 3 once clicked.
Once I export to an Interactive PDF, the buttons on the 'Table of Contents' do not work.
However the buttons on pgs. 2-5, that go to the 'First Page' work.
Any suggestions/tips on how to get buttons to work on the first page, that will navigate you to the specified page?
Thanks!

Book settings always trump File settings, so make certain that in your book file Numbering and Pagination settings do not allow any "Read from File" settings.
What's the Numbering setting for Page in the book files for the chapters? Typically, you should have this set to "Continue Numbering from Previous Page in Book" for all but the first chapter, if you want continuous numbering.
Also make certain that if you want continuous pagination, that you don't have any chapters forced to start on a Right-hand page with the previous chapter also ending on a Right page. This will force FM to add an extra (Left) page and also bump up the page numbering.

Setting up new book with single pages but facing preview and breaking up pages at print time

I have a new book to design. Last time on a similar project (with 100 pages) I had a massive cry at print time as the printer wanted single pages with bleeds. I had set up the book with facing pages. When I unchecked to non facing pages I lost all my formatting and margins... I spent hours fixing this up.... I do need to show double spreads to the client as we go along and I do want to work in a mode that shows both left and right next to each other (ie in a book format). What do you suggest? I have been looking at setting up as single pages side by side and then at print time I think I can move all my right hand pages over with the break up page function and then fix up all my bleeds manually.? thanks in advance

lisalip schrieb:
no my printer needs 5mm bleed all around for the books I am doing and wants single pages with crops and bleeds
I will check the link and hope ok
I do prefer to design with facing pages but as I said it was a nightmare for me last time when setting for print
You confuse single pages with non facing document.
Every page has to be its own page. When your document has facing pages you have to set up a document with facing pages. There is no way around. Otherwise you will have problems with the left and the right page number and a lot of other issues.
If the printer needs single pages you have to export your document as PDF with single pages. That means deactivate the spread option in the PDF export dialog.
Here I have an example:
Situation:
In the 2 spreads on the top you don't have a problem when you export to a single page PDF. The bleed is taking material from the opposite page. It is ok and not disturbing.
But the bottom spread is different. Here you see a design break. It would be disturbing, if you take material from the opposite page. In many cases you would not realize it, but there are several situation where it might be a problem like glue or o-wire bindings where the bleed might become visible.
So you have to go to the page panel.
You have to select the spread first, then you go to the fly-out menu and select don't "allow selected spread to shuffle" pages. The numbers of the spread will appear in rectangle brackets.
Now you can drag the right (or left) page away from their counterpart on the spread. First you have to deselect any pages from that spread, so you can click on any thumbnail of any other page of any other spread. Then click on the right page of that spread. Only this pages has to be selected.
You see the icon of your curser changes as it is in the image above. Drag it as far as you see a thick vertical line. Then release sthe curser.
As result you have now seperate pages. You need only to extend the image, here on page 6. I have taken an image which is large enough, so I need only to move the image frame edge to the bleed.
When I export a single page PDF, as your printer wants I don't get problematic bleed from the opposite page.
You can download this example as IDML file. https://www.dropbox.com/s/qnotrl1ihe7umh7/SinglePages-Spread%20Ordner.zip

Does anyone have URL replacement working for catalog generated from wiki pages library

Hi everyone,
I have created a catalog from a wiki library which surfaces news/event/announcement articles to a publishing site (with make URLs relative to this site selected). This works well after modifying the item page and specifying the content as HTML regarding
the functioning of category/item pages.
The only issue which remains is that hyperlinks between wiki pages are not replaced in the target site (they always point to the wiki pages within the authoring site collection rather than to their catalog counterparts in the publishing site). It is
my understanding that with publishing pages from a pages library these links are replaced to point to other items in the catalog connected site rather than the source.
Is this just by design (only working for publishing pages rather than wiki pages), or does anyone have this replacement working?
If this does not work it kind of defeats the purpose of the catalog here and I might as well give everyone access to the authoring library and just use a CSWP in the publishing site to redirect to the authoring wikis. Not terribly nice from a layout,
navigational or conceptual standpoint though.

Just to add a bit more info to this... looking at the coreclient.log file you can plainly see that the page view took 50367ms to complete.... if anyone has any ideas, it would be greatly appreciated.
Started GET "/wiki/pages/V6C291y8z/price_lists.html" for 192.168.0.100 at Fri Nov 04 13:48:49 -0500 2011
Processing by PagesController#show as HTML
Parameters: {"title"=>"Production_Intercom.html", "id"=>"V6C291y8z"}
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner.html.erb (1.8ms)
get_timezone_offset_from_request: -18000
time: Wed Oct 26 12:52:17 -0500 2011
time (client timezone): Wed Oct 26 12:52:17 -0500 2011
Rendered cc/_entity_header.html.erb (2.5ms)
Rendered cc/_wikieditor.html.erb (0.1ms)
Rendered sidebars/_tags.html.erb (59.0ms)
Rendered cc/_related_item.html.erb (0.0ms)
Rendered sidebars/_related.html.erb (0.3ms)
Rendered cc/_comment.html.erb (0.0ms)
Rendered sidebars/_comments.html.erb (0.4ms)
Rendered sidebars/_updates.html.erb (0.1ms)
Rendered sidebars/_settings.html.erb (0.2ms)
Rendered cc/_sidebar_section.html.erb (61.2ms)
Rendered cc/_sidebar.html.erb (61.5ms)
Rendered pages/show.html.erb within layouts/application (50366.0ms)
Completed 200 OK in 261847ms (Views: 50367.1ms)

Is there a Replacement Program for 2009 iMacs with MXM Graphics Cards?

I have an iMac 24" Early 2009 with the Nvidia GeForce GT 120 256MB MXM graphics card that is freezing and crashing over-and-over, especially when I'm away and it's not connected to my 2nd display! Odd. I've done the usual (cleaned the iMac inside, run fsck, SMC reset, PRAM reset, repair permissions from boot USB, disconnected all peripherals, changed mice and keyboards, changed the HD, reinstalled the OS, run Onyx and so on) and finally decided that it's a faulty graphics card that only a replacement will fix. When I'm home it's more stable when connected via a Displayport DVI adapter to DVI cable to a 24" Dell display. When standalone (like when traveling with my iMac for long stints out of town) it's unusable. It won't run for longer than 30 minutes, often not even 10 minutes, then I get screen artifacts and freezes and then have to fsck to repair the drive before running it again. Only running it in Safe Mode will allow it to run reliably.
However, I believe that I found a stopgap solution. I installed a program which I downloaded after installing XCode called Quartz Debug which has apparently allowed me to disable Quartz Extreme, 2D Acceleration and Quartz GL.
Turning off all Quartz graphics enhancements makes this machine stable if not exactly completely "mac-like" in its performance, but it's at least usable under most conditions for long periods of time. I know of people who have replaced the MXM graphics card on this machine with good effect, but it's an expensive proposition and these cards are apparently few and far between. Has anyone done this?
Based on the large number of nearly identical complaints about this model, both here and elsewhere, it seems like this MXM graphics card is defective or Apple's drivers are defective . . . well maybe, but it very, very predictably crashes when the computer gets hotter and not even _extremely_ hot, but well within what would be normal operating temps for other machines.
I've disassembled and completely cleaned the inside and have replaced the HD with an SSD and removed the optical drive entirely so if anything I've reduced heat-producing devices from the interior of the device installed a fan control and keep the graphics card features mostly turned off.
I've looked for but have yet to see a recall or warranty replacement program for this device and no, I don't have Applecare. I've owned several Apple products in the last two decades and with the issues with Apple products in recent years, it seems like Applecare must be figured as part of any Apple purchase if reliability and ongoing support is desired.
Ironically, I have an Apple IIc and a Power Computing Power Tower 166 that still work just fine, thank you!
JoeL
Atlanta, GA

This cropped up on my wife's late 2009 model 27" iMac, too. Random freezes were encountered, unable to identify cause for months, then one day it started to become unable to complete a normal boot. Tech Tool Deluxe was the only direct indication as far as diagnostics are concerned. I've NEVER been abvle to get Apple's hardware diagnostic to run from the cloud, and we fianlly got it on a Techs' bench, AHT showed nothing wrong. As you said, Safe boot is the only way to get into the system, and performance under 10.8.5 is glacial.
Now the kicker - we DID have AppleCare, and this phase of the MXM graphics demise hit within 4 or 5 months of AppleCare expiration. There's no longer a flat-rate repair option, Apple doesn't have any stock of the video board to sell as a replacement part (was $169, or $179 w/no exchange) and even refurbs of this paltry (512MB VRAM) board can hit $300. I know Mac users have become 2nd-class citizens in Apple's business universe, but we're now looking at sub-42 month lifespans for hardware? At $2k for a machine that lacks touchscreen option, that's out of line.

Having a song play thru an entire site in iWeb 08 versus single page

I like the feature of being able to add a song to my iWeb 08 website.. but what doesn't work well is that the song is only on one page. When someone clicks on a subpage link the song stops.
Is there a way to have the song play thru the entire website no matter what page is surfed? And why not? That seems like a simple feature that all the other web programs have. If i edit the site in Dreamweaver and make that happen using frames... the site is no longer editable in iWeb.

JamesMacSavvy wrote:
Ok... the code you supply on your site doesn't work with a .Mac account...
Hi James,
I'm sure we gonna have this solved...
I went through the process myself and tried it on my .Mac trial account (fortunately I have a trial account!)...
http://web.mac.com/whateveridontcare/Welcome/Music.html
It works for me... The only thing that might happen is that the music needs some time to start (you can see that in the time progress bar of the player (there's a brighter thing that shows it is loading)
Question:
1. Did you put the music into this location?
For .Mac go to the Finder menu and select Go/iDisk/My iDisk/ or hit SchiftCommand(Apple)i and then go to /Web/Sites/. Drop your file into the "Sites" folder or create a folder you call 'Music'
Entering: http://web.mac.com/username/filename.mp3 or http://web.mac.com/username/Music/filename.mp3 in your browser should bring up this file.
2. Sure you published the page? I don't think the problem lies in the code of the player if the url isn't working. Seems like it isn't up. Sure you put the right URL here?
Regards,
Cédric

Printing multiple copies of output for A template with different page Heade

Hi Vetri,
I am trying for a similar requirement as explained in the link below
http://winrichman.blogspot.com/2008/09/multiple-invoice-copy.html
I am facing two problems with 80% of the work done.
I mailed the template and xml to your id.
Please help in solving the problem
Best Regards,
Mahi

I found the issue with my report. I gave the syntax wrong when ending for-each for group. Using Variables no longer gives error and the issue is resolved with syntax as below.
Header Information
<?for-each-group@section: /yyy/LIST_G_xxx/xxx; COPIES?>
<?variable@incontext:G1;current-group()?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,current-group()/COPIES,1)?>
<?end for-each?>
<?end for-each-group?>
<?start:body?>
Here goes the body
<?start:last-page:body?> <?end body?>
I inserted a page break here through word tools
Here goes special instructions which only prints on last page
<?end body?>
But... I am still working on a related issue to print the Copy Number on the Header. For example if the Copy being printed is 1 it should print Set#1 on header, for 2nd Copy Set#2 and etc.
I saw in some post that the variable can not be used out of Loop. Can someone help how to accomplish this.
TIA
Neeraja

Creating multiple page report with single page excel template

Hi,
I have a created a single sheet excel template. When my LabVIEW program runs, I want to insert a data table in the excel report for each time the loop runs. Each time I add a new sheet in the report and add the data table. I want to get the same template in each new sheet. Please let me know how to insert the same template in each new sheet in the same file. Right now I need to create template file with 5-6 worksheets each with the same format.
Rashmi

Thanks for your reply.
I tried to do the same you have suggested. As the "Save As" option does not work, I tried to copy the block diagram into a new vi but it gives the error. I am attaching here the screen shot of the same.
Attachments:
copy_error.png ‏208 KB

Checking for different values with single var name.

Hi,
i have a variable NAME which should not take 5 different values.
i want to check NAME againist these 5 values at run time. is there any way to check NAME againist these 5 values like NAME in X, where x contains these 5 values.
could someone let me know the syntax and approach to do that.
your help would be appreciated.
thanks,
kranthi.
Message was edited by: kranthi kumar
Message was edited by: kranthi kumar

Hi Kranthi
If you want a method to set this property persistently via definitions made in DDIC, I do not know any way. If the values that the parameter can take are definite, then you can set up a check table.
Otherwise, one should achieve this programatically.
i.
 IF name = <prohibited_val1> OR
 name = <prohibited_val2> OR
 name = <prohibited_val3> OR
 name = <prohibited_val4> OR
 name = <prohibited_val5> .
*-- The rule is broken
 ENDIF .
ii. Define a range and check with it.
TABLES mytable .
RANGES grn_namepval FOR mytable-name .
*-- Begin of block A
CLEAR grn_namepval .
grn_namepval-sign = 'I' .
grn_namepval-option = 'EQ' .
grn_namepval-low = <prohibited_val1> .
APPEND grn_namepval .
*-- End of block A
*--Do block A for each prohibited value
IF name IN grn_name_pval .
*--Your rule is broken
ENDIF .
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Word 2011 for Mac Issue with Custom Page Size

I have installed Microsoft Office 2011 for Mac on my brand new iMac. I'm using Microsoft Word 2011 for Mac and I have opened the "Word Publishing Layout" template (this is essentially Microsoft Publisher). I'm trying to set up custom page sizes by performing the following steps. I go to File --> Page Setup and use the following settings:
1. Settings: Page Attributes
2. Format For: Any Printer
3. Paper Size: I choose "Manage Custom Sizes"
4. I create a 24x36 page and save it
When I do this, Word 2011 (and Word 2008) for Mac will only go to a maximum of 22 inches wide and 22 inches in height. Is there any way around this? I need the big sizes to do digital proofs for my business. I don't want to scale down to 12x18 (essentially cutting the proof by 50%) because when I import it into my other program that can accommodate any size document, I have to do a lot of manual work to get things back to scale. Thanks in advance for your help. If we can figure this out, I'll be grateful.
AC

Please re-post on the Office for Mac Product Forums

Give information/site for Complete one QM Cycle, please!!!

Hi! SAP QM Gurus
Please give information about one QM complete cycle.
Thanks & Regard
MDS
Edited by: MOHAMMAD SUBHANI on Feb 20, 2012 9:52 AM

hi
check out a scenario
help.sap.com/...Scenarios/S05_Ope_Procurement_EN_S... - United StatesSimilar

From single page to double page spreads when rotating

We've seen some publications that display as a single page when the iPad is held in portrait mode but switch to double page spreads when the iPad is rotated to landscape mode.
We've searched this forum - which has been very helpful so far - but can't seem to find how to enable this. Is it something fairly simple we've missed or has it been custom coded for the publications that use it? They seem to be pdf based as far as we can tell, or at least they are 'pinch & zoom'able and don't have any other interactivity, so they're quite basic. Nonetheless it is quite a nice way to display/read the publications.
We're quite new to the whole Adobe DPS system but are keen to get up to speed with it. We see a lot of potential with these tools.
Thanks

Very simple... create 1 folio for each spread with 1 page in landscape orientation and 2 pages in portrait - and only allow horizontal navigation (we use DPS + WoodWing so terms might differ at bit). Adobe made a script for converting PDF to Folio - spread by spread. Use the script for creating the needed layouts.
We have at least 15 apps working like that.
/Peter

Create a pdf as single pages from a spread in InDesign

I have a 4 panel brochure in InDesign. The document is laid out as two pages 24.312 inches wide by 9.5 inches tall. I ultimately want to create an 8 page PDF - single tiles of the panels from the brochure. I cannot figure out how to do this.

You did set up your document with a mess!
I did another answer to the same topic today:
Create a new document (File > New > Document…) with 4 pages,in put your size of the trimmed pages, insert the bleed. First page is page 4!
You have to inform yourself on the bleed size! Ask the printer!
Click twice on the right page thumbnail in the panel and go to the section and numbering menu in the panel’s fly out menu and change to start with page 2.
Change the page to a start of a new section, start with 1.
You have now facing pages 4 | 1 & 2–3 with correct page numbers in 2 spreads. On page 1 you see the triangle which indicates that here is a new section.
When you finally export your PDF for print Export as single pages, not as spread.

More No of GRN with single excise invoice

Dear Sir
we want to do goods receipt for 4 lots with single excise invoice.we have done multible goods receipt with multi credit settings in J1id for that perticular material.we tried to do goods receipt with reference to out bound delivery NO.first lot we done GRN with out any issue,For second lot we put a same Excise invoice NO,At the time System is giving error like This excise invoice all the items are recived. Any other option is there to to multible GRN with same excise invoice
Please help me in this
Thanks
Maruthi S

Hi
I have single line Item in PO & MIGO
This Is case of Pet Coke , Relience importing this Pet Coke & we are purchasing from relience
Supplier is provoiding actual excise invoice after 15 or 20 days of material supply
as soon as we received material we are doing Goods Receipts for 15 days then for all GRs we receive
single excise invoice after 15-20 days then . I want to capture & POst excise invoice for all GR , but as
per you suggetion in part 2 there are multiple entries for the single excise invocie , which is not correct
as per excise rule ,
please provide some solutions
thansk

Replace Site for Completed Event with Single Page

Similar Messages

Maybe you are looking for