Replace slim with lxdm
Hi,
Please someone let me know the thread where I find instructions to replace slim with lxdm.
thanks,
swaroop
You need instructions to do this?
Disable slim.service, install lxdm, enable lxdm.service.
Optionally, remove the slim package.
Similar Messages
-
Satellite M30: Replace DVD with additional HDD?
Hello!
As my Satellite M30-642 doesn't offer a modular bay to switch drives and as I got an additional DVD writer for USB which I can use I am thinking of trying an experiment: removal of DVD drive and replacing it with an additional HDD/SSD.
As the SSDs are very light weight, have no moving parts and do not necessarily require screws to be installed and as the DVD slot delivers IDE and power connector this could work. The SSD needs to be placed inside an old and modified slimline cd-rom to ensure that the modification isn't visible and the notebook is safe from dust etc.
Has anyone tried something like that before? Are there any solutions to buy for Sat M30 (model year 2004)?
Cheers, obreitfelderHi
As far as I know the Sat M30 doesnt support the slim select bay and therefore you cannot use such adaptor instead of the CD/DVD drive.
Sorry this is not possible
Bye -
My 5th gen ipod died and apple replaced it with a new one. I synced it up to the itunes that I already have on my computer but an error message keeps coming up telling me that its not authorized on this computer. What do I do?
About iTunes Store authorization and deauthorization
iPod: Troubleshooting songs and audiobooks that won't play
iPod does not play content purchased from the iTunes Store -
I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.
I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223 -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport -
I have a MacBook Pro 15.4" 2.53GHz Core 2 Duo (A1286) - Mid 2009 MC118LL/A and I think the MATSHITA DVD-R UJ-868 is going out. Should I replace it with the exact same drive or is there a better one that is compatible?
I went to my local Apple store last weekend with a similar issue on my 2007 C2D MBP and they quoted me a price of around £60 (excluding VAT) to replace the optical drive. That's about the same price as the external optical drive a bought for my RMBP.
Alternatively you could just buy a 3rd party external drive if you want to save cash but note that the external Apple superdrive is not compatible with MacBooks with built in optical drives. -
I have a new computer and have installed iTunes on it.
Now I want to sync my iphone but the new itunes on the new computer wants to remove everything on my niphone and replace it with what's on the newly installed itunes data but it does not have my data.
How can I sync the new itunes with my iphone and not have my phone data wiped out?
Thanks,
hscllchscllc wrote:
How can I sync the new itunes with my iphone and not have my phone data wiped out?
There is no way to stop iTunes from doing exactly what it is designed to do.
The iPhone is designed to sync with one and only one computer.
If you have moved/copied your iTunes library from your old computer to your new one, then iTunes wiping your device is no problem. You would simply sync and iTunes will put all the content back. -
Required replace BSEG with BSAK BSIK BSIS BSAS for report performance
Hi Experts
i m optimizing a report in which data is extracting from BSEG , 5 time so i reduses the performance of report
so i want replace BSEG with BSAK BSIK BSIS BSAS for the same data what I am getting now . this is report of Purchase of item. code is here.
REPORT zmm_pur_reg_kanhe LINE-SIZE 1023.
*& Des :Purchase Tax Register Report for KANHE
*& Created on :12-07-07
*& Suggested by:Paresh Saini(MM)
*& Changes By: Lailu Philip
*& Changed On: 24.09.2007
*& Changes: New columns for G/L Code Description,VAT Amt,VAT Perc,CST Perc
*& ,SHCESS Amounts,WCT G/L Acc., WCT Amt,Tax Code
*& for Purchase Order,WCT tax code & Percentage.
*& Request No: S6DK921577
Data Declaration
*& changes: by Vincy on 12.01.2007
*& changes: display purchase order with vendor type zpsr(get_zpsr)
*& Request No: S6DK930821
TABLES:ekbe, lfa1, faglflexa.",j_1iexcdtl,lfa1,bkpf,bseg.
TYPE-POOLS: slis. "ALV Declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
DATA: it_sortcat TYPE slis_sortinfo_alv OCCURS 1,
col_pos LIKE fieldcatalog-col_pos .
TYPES :BEGIN OF wa1_ekbe,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
matnr TYPE ekbe-matnr,
ebelp TYPE j_1iexcdtl-ritem1,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
lfbnr TYPE ekbe-lfbnr,
lfpos TYPE ekbe-lfpos,
bldat TYPE ekbe-bldat,
REEWR TYPE REEWR,
END OF wa1_ekbe.
TYPES :BEGIN OF wa2_ekbe,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
lfbnr TYPE ekbe-lfbnr,
lfpos TYPE ekbe-lfpos,
bldat TYPE ekbe-bldat,
REEWR TYPE REEWR,
awkey(20) TYPE c,
MATNR TYPE MATNR,
MWSKZ TYPE EKBE-MWSKZ,
END OF wa2_ekbe.
TYPES :BEGIN OF wa1_j_1iexcdtl,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE j_1iexcdtl-capind,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
bedinv type J_1IBEDINV,
ecsinv type J_1IECSINV,
EXADDINV1 type J_1IEXADDINV1,
exaddtax1 TYPE j_1iexcdtl-exaddtax1,
rdoc2 TYPE j_1iexcdtl-rdoc2,
ritem2 TYPE j_1iexcdtl-ritem2,
menge TYPE j_1iexcdtl-menge,
ADDED FOR RUDRAPUR ON 08.03.2008 BY ASHOK.CH
*ENDED ON 08.02.2008
END OF wa1_j_1iexcdtl.
TYPES :BEGIN OF wa1_lfa1,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
werks TYPE lfa1-werks,
lifnr TYPE lfa1-lifnr,
END OF wa1_lfa1.
TYPES :BEGIN OF wa1_ekexclf,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
awkey(20) TYPE c,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE j_1iexcdtl-capind,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
exaddtax1 TYPE j_1iexcdtl-exaddtax1,
added for rudrapur on 08.03.2008 by ASHOK.CH
bedinv type J_1IBEDINV,
ecsinv type J_1IECSINV,
EXADDINV1 type J_1IEXADDINV1,
END OF MODIFICATION ON 08.02.2008
END OF wa1_ekexclf.
TYPES :BEGIN OF wa1_bkpf,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
budat TYPE bkpf-budat,
tcode TYPE bkpf-tcode,
awkey TYPE bkpf-awkey,
END OF wa1_bkpf.
TYPES :BEGIN OF wa1_bseg,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
buzei TYPE bseg-buzei,
bschl TYPE bseg-bschl,
fwbas TYPE bseg-fwbas ,
pswbt TYPE bseg-pswbt,
hkont TYPE bseg-hkont,
wrbtr TYPE bseg-wrbtr,
ktosl TYPE bseg-ktosl,
koart TYPE bseg-koart,
shkzg TYPE bseg-shkzg,
mwskz TYPE bseg-mwskz,
qsskz TYPE bsis-qsskz,
dmbtr TYPE bseg-dmbtr,
lifnr TYPE bseg-lifnr,
matnr TYPE bseg-matnr,
flag TYPE C,
flag_21 TYPE C,
END OF wa1_bseg.
TYPES :BEGIN OF wa1_tax,
belnr TYPE bseg-belnr,
fi_docno TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
bukrs TYPE bseg-bukrs,
awkey TYPE bkpf-awkey,
fwbas TYPE bseg-fwbas ,
cst_amt TYPE bseg-pswbt,
vat_amt TYPE bseg-pswbt,
shcess_amt TYPE bseg-pswbt,
gl_accnt TYPE bseg-hkont,
gl_desc TYPE skat-txt50,
wctglacc TYPE bseg-hkont,
wctamt TYPE bseg-dmbtr,
taxcode TYPE t059z-wt_withcd,
taxperc TYPE t059z-qsatz,
total_value TYPE bseg-wrbtr,
set_off TYPE bseg-wrbtr,
cond_type TYPE konv-kschl,
description(20) TYPE c,
service_tax TYPE bseg-wrbtr,
service_ecess TYPE bseg-wrbtr,
service_shcess TYPE bseg-wrbtr, "vincy on 31.01.08
ebelp TYPE ekbe-ebelp, " on 15.04.08
flag TYPE c,
mwskz TYPE bseg-mwskz,
END OF wa1_tax.
DATA:BEGIN OF itab_skat,
saknr TYPE skat-saknr,
spras TYPE skat-spras,
txt50 TYPE skat-txt50,
END OF itab_skat.
DATA: iskat LIKE itab_skat OCCURS 0,
wa_skat LIKE itab_skat.
DATA : BEGIN OF zbsis OCCURS 0,
bukrs TYPE bsis-bukrs,
hkont TYPE bsis-hkont,
augdt TYPE bsis-augdt,
augbl TYPE bsis-augbl,
zuonr TYPE bsis-zuonr,
gjahr TYPE bsis-gjahr,
belnr TYPE bsis-belnr,
buzei TYPE bsis-buzei,
budat TYPE bsis-budat,
qsskz TYPE bsis-qsskz,
END OF zbsis.
DATA: BEGIN OF zt059z OCCURS 0,
land1 TYPE t059z-land1,
witht TYPE t059z-witht,
wt_withcd TYPE t059z-wt_withcd,
qscod TYPE t059z-qscod,
qsatz TYPE t059z-qsatz,
hkont TYPE bsis-hkont,
belnr TYPE bsis-belnr,
END OF zt059z.
DATA: BEGIN OF it_faglflexa OCCURS 0, "added by vincy
ryear TYPE faglflexa-ryear,
docnr TYPE faglflexa-docnr,
rldnr TYPE faglflexa-rldnr,
rbukrs TYPE faglflexa-rbukrs,
docln TYPE faglflexa-docln,
prctr TYPE faglflexa-prctr,
END OF it_faglflexa.
Final Table***
TYPES :BEGIN OF wa1_final,
belnr TYPE ekbe-belnr,
fi_docno TYPE bseg-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
rate TYPE konv-kbetr,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
mwskz TYPE bseg-mwskz,
gjahr TYPE ekbe-gjahr,
awkey(20) TYPE c,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE string,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
fwbas TYPE bseg-fwbas ,
vat_per TYPE konv-kbetr,
vat_amt TYPE bseg-pswbt,
cst_per TYPE konv-kbetr,
cst_amt TYPE bseg-pswbt,
shcess_amt TYPE bseg-pswbt,
gl_accnt TYPE bseg-hkont,
gl_desc TYPE skat-txt50,
wctglacc TYPE bseg-hkont,
wctamt TYPE bseg-dmbtr,
taxcode TYPE t059z-wt_withcd,
taxperc TYPE t059z-qsatz,
total_value TYPE bseg-wrbtr,
total_value1 TYPE bseg-wrbtr,
excise_tax TYPE bseg-wrbtr,
excise TYPE bseg-wrbtr,
set_off TYPE bseg-wrbtr,
inventorised TYPE konv-kawrt,
cond_type TYPE konv-kschl,
cond_type2 TYPE konv-kschl,
description(20) TYPE c,
service_tax TYPE bseg-wrbtr,
service_ecess TYPE bseg-wrbtr,
service_shcess TYPE bseg-wrbtr, "vincy on 31.01.08
END OF wa1_final.
DATA :it2_ekbe TYPE TABLE OF wa1_ekbe WITH HEADER LINE,
it_ekbe TYPE TABLE OF wa1_ekbe WITH HEADER LINE,
it1_ekbe TYPE TABLE OF wa2_ekbe WITH HEADER LINE WITH KEY ebelp ebeln,
it_j_1iexcdtl TYPE TABLE OF wa1_j_1iexcdtl WITH HEADER LINE WITH KEY rdoc1 ritem1,
it_lfa1 TYPE TABLE OF wa1_lfa1 WITH HEADER LINE WITH KEY lifnr,
it_lfa2 TYPE TABLE OF wa1_lfa1 WITH HEADER LINE WITH KEY lifnr,
it_bkpf TYPE TABLE OF wa1_bkpf WITH HEADER LINE,
it_bseg TYPE TABLE OF wa1_bseg WITH HEADER LINE WITH KEY
bukrs belnr gjahr ktosl shkzg koart,
it1_bseg TYPE TABLE OF wa1_bseg WITH HEADER LINE WITH KEY
bukrs belnr gjahr ktosl shkzg koart,
it_tax TYPE TABLE OF wa1_tax WITH HEADER LINE WITH KEY awkey ,
it_ekexclf TYPE TABLE OF wa1_ekexclf WITH HEADER LINE,
it_final TYPE TABLE OF wa1_final WITH HEADER LINE,
it_final1 TYPE TABLE OF wa1_final WITH HEADER LINE, "vincy
wa_ekbe TYPE wa1_ekbe,
wa1_ekbe TYPE wa2_ekbe,
wa_j_1iexcdtl TYPE wa1_j_1iexcdtl,
wa_lfa1 TYPE wa1_lfa1,
wa_lfa2 TYPE wa1_lfa1,
wa_bkpf TYPE wa1_bkpf,
wa_bseg TYPE wa1_bseg,
wa_tax TYPE wa1_tax,
wa_ekexclf TYPE wa1_ekexclf,
PLANT TYPE WERKS_D,
wa_final TYPE wa1_final.
DATA: it_konv TYPE konv OCCURS 0 WITH HEADER LINE ,
wa_konv TYPE konv,
invent TYPE p DECIMALS 4,
invent1 TYPE konv-kawrt.
DATA:d1 TYPE konv-kposn,
d2 TYPE ekbe-ebelp.
DATA: v_belnr TYPE ekbe-belnr,
v_gjahr TYPE ekbe-gjahr,
v_awkey(20) TYPE c,
idx TYPE sy-tabix.
**********by vincy on 12.01.07***********
DATA: BEGIN OF it_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
bukrs LIKE ekko-bukrs,
bsart LIKE ekko-bsart,
lifnr LIKE ekko-lifnr,
belnr LIKE ekbe-belnr,
END OF it_ekko.
DATA: BEGIN OF it_ekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
txz01 LIKE ekpo-txz01,
END OF it_ekpo.
DATA: BEGIN OF it_lfa1v OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF it_lfa1v.
DATA: BEGIN OF s_prctr OCCURS 0,
low LIKE faglflexa-prctr,
END OF s_prctr.
DATA: it_bsegv TYPE TABLE OF wa1_bseg WITH HEADER LINE.
DATA: it_konv1 LIKE konv OCCURS 0 WITH HEADER LINE.
DATA:cnt TYPE i,
awkey1(250).
DATA: LIFNR TYPE LIFNR,
NAME TYPE NAME1_GP,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKTX,
TAX_TOT TYPE KWERT.
***********end of changes by vincy ************
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks1 FOR ekbe-werks,
s_budat1 FOR ekbe-budat,
s_fiscal FOR ekbe-gjahr,
s_lifnr FOR lfa1-lifnr.
SELECTION-SCREEN END OF BLOCK b1.
**"changes being by nahid on 16.04.2008
PARAMETERS : excel AS CHECKBOX DEFAULT 'X'.
PARAMETERS: infile LIKE rlgrap-filename.
DATA : zfile TYPE string.
**"changes ended by nahid on 16.04.2008
AT SELECTION-SCREEN.
IF s_werks1 IS INITIAL.
MESSAGE 'Please Enter Plant details' TYPE 'E'.
ENDIF.
IF s_budat1 IS INITIAL.
MESSAGE 'Please Enter Posting date' TYPE 'E'.
ENDIF.
IF s_fiscal IS INITIAL.
MESSAGE 'Please Enter Fiscal Year' TYPE 'E'.
ENDIF.
*start change by nahid on 16.4.08
AT SELECTION-SCREEN ON VALUE-REQUEST FOR infile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
file_name = infile
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
zfile = infile.
*end change by nahid on 16.4.08
START-OF-SELECTION.
plant = s_werks1-low.
MODIFIED FOR RUDRAPUR BY ASHOK.CH ON 13.03.2008
IF PLANT NE 'RD01'.
PERFORM get_data.
PERFORM get_zpsr. "vincy
ENDIF.
IF PLANT EQ 'RD01'.
PERFORM get_data1.
ENDIF.
*END OF MODIFICATION ON 13.03.2008
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*start chng by nahid on 16.4.08
IF excel = 'X'.
IF NOT infile IS INITIAL.
PERFORM excel_data.
ELSE.
MESSAGE e000(0) WITH 'Please Enter the File Path'.
ENDIF.
ENDIF.
*end by nahid on 16.4.08
*& Form get_data
FORM get_data .
SELECT belnr budat menge matnr ebelp ebeln gjahr lfbnr lfpos bldat REEWR FROM ekbe INTO
TABLE it_ekbe
WHERE werks IN s_werks1 AND
(bewtp EQ 'Q' OR bewtp EQ 'N') AND
bewtp IN ('Q' , 'N') AND "added N by vincy on 6.07.2008
budat IN s_budat1 AND
gjahr IN s_fiscal .
IF sy-subrc = 0. "for 1st ekbe
IF it_ekbe[] IS NOT INITIAL.
SELECT exnum exdat lifnr matnr maktx capind exbas exbed ecs werks
ritem1 rdoc1 docyr bedinv ecsinv EXADDINV1 exaddtax1 rdoc2 ritem2 menge
FROM j_1iexcdtl INTO TABLE it_j_1iexcdtl FOR ALL ENTRIES IN it_ekbe
WHERE rdoc1 = it_ekbe-ebeln
AND ritem1 = it_ekbe-ebelp AND
lifnr IN s_lifnr.
ENDIF.
IF it_j_1iexcdtl[] IS NOT INITIAL.
SELECT name1 ktokk werks lifnr FROM lfa1 INTO
TABLE it_lfa1 FOR ALL ENTRIES IN it_j_1iexcdtl
WHERE lifnr = it_j_1iexcdtl-lifnr.
ENDIF.
LOOP AT it_ekbe INTO wa_ekbe.
wa1_ekbe-belnr = wa_ekbe-belnr.
wa1_ekbe-budat = wa_ekbe-budat.
wa1_ekbe-menge = wa_ekbe-menge.
wa1_ekbe-ebelp = wa_ekbe-ebelp.
wa1_ekbe-ebeln = wa_ekbe-ebeln.
wa1_ekbe-gjahr = wa_ekbe-gjahr.
wa1_ekbe-matnr = wa_ekbe-matnr.
wa1_ekbe-lfbnr = wa_ekbe-lfbnr.
wa1_ekbe-lfpos = wa_ekbe-lfpos.
wa1_ekbe-bldat = wa_ekbe-bldat.
v_belnr = wa_ekbe-belnr.
v_gjahr = wa_ekbe-gjahr.
CONCATENATE v_belnr v_gjahr INTO v_awkey.
wa1_ekbe-awkey = v_awkey.
APPEND wa1_ekbe TO it1_ekbe.
CLEAR :wa_ekbe.
ENDLOOP.
************changes by vincy on 29.05.08 for 'FB08' and 'FB60'**************
LOOP AT s_werks1.
IF s_werks1-low = 'KN01'.
s_prctr-low = 'MUKNHSTM'.
ELSEIF
s_werks1-low = 'NS01'.
s_prctr-low = 'MUNSKSTM'.
ELSEIF
s_werks1-low = 'RD01'.
s_prctr-low = 'MURDPSTM'.
ENDIF.
APPEND s_prctr.
ENDLOOP.
SELECT bukrs belnr gjahr budat tcode awkey FROM bkpf INTO TABLE it_bkpf
WHERE bukrs = 'MU51' AND
gjahr IN s_fiscal AND
budat IN s_budat1 AND
( tcode = 'FB60' OR tcode = 'FB08' ).
IF it_bkpf[] IS NOT INITIAL.
SELECT ryear docnr rldnr rbukrs docln prctr FROM faglflexa INTO TABLE it_faglflexa
FOR ALL ENTRIES IN it_bkpf WHERE rbukrs = 'MU51' AND
ryear = it_bkpf-gjahr AND
docnr = it_bkpf-belnr.
ENDIF.
LOOP AT it_faglflexa.
READ TABLE s_prctr WITH KEY low = it_faglflexa-prctr.
IF sy-subrc <> 0.
DELETE it_faglflexa.
ENDIF.
CLEAR: it_faglflexa, s_prctr.
ENDLOOP.
**************************end of change*************************************
IF it1_ekbe[] IS NOT INITIAL.
SELECT bukrs belnr gjahr budat tcode awkey FROM bkpf APPENDING
TABLE it_bkpf FOR ALL ENTRIES IN it1_ekbe
WHERE bukrs = 'MU51' AND
gjahr IN s_fiscal AND
awkey = it1_ekbe-awkey.
ENDIF.
IF sy-subrc = 0. "bkpf
IF it_bkpf[] IS NOT INITIAL.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it1_bseg FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
bukrs = it_bkpf-bukrs AND
( bschl = '21' ) AND
lifnr IN s_lifnr. "added 21 for miro cancelation
IF it1_bseg[] IS NOT INITIAL.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it_bseg FOR ALL ENTRIES IN it1_bseg
WHERE belnr = it1_bseg-belnr AND
gjahr = it1_bseg-gjahr AND "changed it_bkpf to it1_bseg
bukrs = it1_bseg-bukrs .
LOOP AT it_bseg.
it_bseg-wrbtr = it_bseg-wrbtr * -1.
it_bseg-fwbas = it_bseg-fwbas * -1.
it_bseg-pswbt = it_bseg-pswbt * -1.
it_bseg-flag_21 = 'X'.
MODIFY it_bseg.
CLEAR it_bseg.
ENDLOOP.
SELECT name1 ktokk werks lifnr FROM lfa1 INTO
TABLE it_lfa2 FOR ALL ENTRIES IN it1_bseg
WHERE lifnr = it1_bseg-lifnr.
ENDIF.
REFRESH it1_bseg.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it1_bseg FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
bukrs = it_bkpf-bukrs AND
( bschl = '31' ) AND "added bschl and lifnr by vincy
lifnr IN s_lifnr.
IF it1_bseg[] IS NOT INITIAL.
SELECT name1 ktokk werks lifnr FROM lfa1 APPENDING
TABLE it_lfa2 FOR ALL ENTRIES IN it1_bseg
WHERE lifnr = it1_bseg-lifnr.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg APPENDING TABLE it_bseg FOR ALL ENTRIES IN it1_bseg
WHERE belnr = it1_bseg-belnr AND
gjahr = it1_bseg-gjahr AND "changed it_bkpf to it1_bseg
bukrs = it1_bseg-bukrs AND
bschl <> '35'. "added bschl to avoid vendor paymnt
ENDIF.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr
FROM bseg APPENDING CORRESPONDING FIELDS OF TABLE it_bseg
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
lifnr IN s_lifnr AND
bukrs = it_bkpf-bukrs AND qsskz IN ('WI', 'WJ').
ENDIF.
ENDIF.
SORT it_bseg BY belnr buzei.
IF NOT it_bseg[] IS INITIAL.
SELECT saknr spras txt50 FROM skat
INTO TABLE iskat
FOR ALL ENTRIES IN it_bseg
WHERE saknr = it_bseg-hkont AND spras = 'EN'.
SELECT bukrs hkont augdt augbl zuonr gjahr belnr buzei budat qsskz FROM bsis
INTO TABLE zbsis
FOR ALL ENTRIES IN it_bseg
WHERE bukrs = 'MU51' AND hkont = it_bseg-hkont
AND belnr = it_bseg-belnr AND gjahr = s_fiscal
AND budat IN s_budat1.
ENDIF.
LOOP AT it_bseg.
READ TABLE zbsis WITH KEY hkont = it_bseg-hkont.
IF sy-subrc = 0.
it_bseg-qsskz = zbsis-qsskz.
MODIFY it_bseg.
ENDIF.
CLEAR: it_bseg,zbsis.
ENDLOOP.
LOOP AT zt059z.
LOOP AT it_bseg WHERE qsskz = zt059z-wt_withcd.
zt059z-hkont = it_bseg-hkont.
zt059z-belnr = it_bseg-belnr.
MODIFY zt059z.
CLEAR: it_bseg,zt059z.
ENDLOOP.
ENDLOOP.
CLEAR: wa_bkpf.
*******Filling Wa.
LOOP AT it_bkpf INTO wa_bkpf. "changes by vincy on 14.04.2008
LOOP AT it1_ekbe INTO wa1_ekbe .
READ TABLE it_bkpf INTO wa_bkpf
WITH KEY awkey = wa1_ekbe-awkey.
wa_tax-belnr = wa_bkpf-belnr.
wa_tax-gjahr = wa_bkpf-gjahr.
wa_tax-bukrs = wa_bkpf-bukrs.
wa_tax-awkey = wa_bkpf-awkey.
wa_tax-ebelp = wa1_ekbe-ebelp.
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr INTO wa_bseg.
IF sy-subrc = 0.
wa_tax-fi_docno = wa_bseg-belnr.
wa_tax-mwskz = wa_bseg-mwskz.
CLEAR: wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP4' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-cst_amt = wa_bseg-pswbt.
wa_tax-description = 'CST CG Sett off'.
wa_tax-cond_type = 'JVCS'.
ENDIF.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS1' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-fwbas = wa_bseg-fwbas.
ENDIF.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP7' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-vat_amt = wa_bseg-pswbt.
wa_tax-description = 'VAT CG Sett off'.
wa_tax-cond_type = 'JVCD'.
ENDIF.
CLEAR wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP5' INTO wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
hkont = '0002868001' INTO wa_bseg. "vat changed for V0 tax code
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-vat_amt = wa_bseg-pswbt.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-cond_type = 'JVRD'.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-description = 'VAT RM Set off'.
ENDIF.
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
shkzg = 'H'
koart = 'K'
INTO wa_bseg.
IF sy-subrc = 0.
wa_tax-total_value = wa_bseg-wrbtr.
ENDIF.
START OF MODIFICATION BY ASHOK.CH ON 08.02.2008
service_tax
CLEAR wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS8' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-service_tax = wa_bseg-wrbtr.
wa_tax-description = 'Service Tax'.
wa_tax-cond_type = 'JSRT'.
ENDIF.
service_ecess
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS9' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-service_ecess = wa_bseg-wrbtr.
ENDIF.
**********changes by vincy on 31.01.08*********************
service_shcess
CLEAR: wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VSE' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-service_shcess = wa_bseg-wrbtr.
ENDIF.
*************************end of changes***********************
END OF MODIFICATION ON 08.02.2008
APPEND wa_tax TO it_tax.
ENDIF.
CLEAR :wa_tax,wa_bseg,wa_bkpf,wa_skat.
ENDLOOP.
CLEAR wa1_ekbe.
LOOP AT it1_ekbe INTO wa1_ekbe.
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
ritem1 = wa1_ekbe-ebelp.
*New query added by Nilesh
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-lfbnr
ritem2 = wa1_ekbe-lfpos.
READ TABLE it_bkpf INTO wa_bkpf
WITH KEY awkey = wa1_ekbe-awkey.
IF sy-subrc = 0.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr.
IF sy-subrc = 0.
wa_ekexclf-belnr = wa1_ekbe-belnr.
wa_ekexclf-budat = wa1_ekbe-budat.
wa_ekexclf-menge = wa1_ekbe-menge.
wa_ekexclf-ebelp = wa1_ekbe-ebelp.
wa_ekexclf-ebeln = wa1_ekbe-ebeln.
wa_ekexclf-gjahr = wa1_ekbe-gjahr.
wa_ekexclf-awkey = wa1_ekbe-awkey.
wa_ekexclf-lifnr = it_bseg-lifnr.
wa_ekexclf-matnr = it_bseg-matnr .
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl "for records for which either rdoc1 or matnr
WITH KEY rdoc2 = wa1_ekbe-lfbnr "not maintained in ekbe by vincy on 16.06.08
menge = wa1_ekbe-menge.
IF sy-subrc <> 0 .
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
exdat = wa1_ekbe-bldat
matnr = wa1_ekbe-matnr
menge = wa1_ekbe-menge.
ENDIF.
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
ritem1 = wa1_ekbe-ebelp.
IF sy-subrc = 0.
wa_ekexclf-belnr = wa1_ekbe-belnr.
wa_ekexclf-budat = wa1_ekbe-budat.
wa_ekexclf-menge = wa1_ekbe-menge.
wa_ekexclf-ebelp = wa1_ekbe-ebelp.
wa_ekexclf-ebeln = wa1_ekbe-ebeln.
wa_ekexclf-gjahr = wa1_ekbe-gjahr.
wa_ekexclf-awkey = wa1_ekbe-awkey.
wa_ekexclf-exnum = wa_j_1iexcdtl-exnum.
wa_ekexclf-exdat = wa_j_1iexcdtl-exdat.
wa_ekexclf-lifnr = wa_j_1iexcdtl-lifnr.
wa_ekexclf-matnr = wa_j_1iexcdtl-matnr .
wa_ekexclf-maktx = wa_j_1iexcdtl-maktx .
wa_ekexclf-capind = wa_j_1iexcdtl-capind.
wa_ekexclf-exbas = wa_j_1iexcdtl-exbas.
wa_ekexclf-exbed = wa_j_1iexcdtl-exbed.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecs.
wa_ekexclf-werks = wa_j_1iexcdtl-werks.
wa_ekexclf-ritem1 = wa_j_1iexcdtl-ritem1.
wa_ekexclf-rdoc1 = wa_j_1iexcdtl-rdoc1.
wa_ekexclf-docyr = wa_j_1iexcdtl-docyr.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddtax1.
IF it_bseg-flag_21 = 'X'.
wa_ekexclf-exbas = wa_ekexclf-exbas * -1.
ENDIF.
MODIFIED BY ASHOK.CH ON 08.03.2008
IF wa_j_1iexcdtl-WERKS NE 'RD01' .
wa_ekexclf-exbed = wa_j_1iexcdtl-exbed.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecs.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddtax1.
IF it_bseg-flag_21 = 'X'.
wa_ekexclf-exbed = wa_ekexclf-exbed * -1.
wa_ekexclf-ecs = wa_ekexclf-ecs * -1.
wa_ekexclf-exaddtax1 = wa_ekexclf-exaddtax1 * -1.
ENDIF.
ELSE.
wa_ekexclf-exbed = wa_j_1iexcdtl-BEDINV.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecsINV.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddINV1.
ENDIF.
END IF MODIFICATION ON 08.03.2008
APPEND wa_ekexclf TO it_ekexclf.
CLEAR :wa_lfa1,wa_j_1iexcdtl,wa1_ekbe.
ENDIF.
READ TABLE it_lfa2 INTO wa_lfa2
WITH KEY lifnr = wa_ekexclf-lifnr.
IF sy-subrc = 0.
wa_ekexclf-name1 = wa_lfa2-name1.
wa_ekexclf-ktokk = wa_lfa2-ktokk.
ENDIF.
APPEND wa_ekexclf TO it_ekexclf.
ENDIF.
ENDIF.
CLEAR :wa_lfa1,wa_j_1iexcdtl,wa1_ekbe,wa_lfa2,wa_ekexclf.
ENDLOOP.
CLEAR wa_ekexclf.
LOOP AT it_ekexclf INTO wa_ekexclf.
wa_final-belnr = wa_ekexclf-belnr.
wa_final-budat = wa_ekexclf-budat.
wa_final-menge = wa_ekexclf-menge.
wa_final-ebelp = wa_ekexclf-ebelp.
wa_final-ebeln = wa_ekexclf-ebeln.
wa_final-gjahr = wa_ekexclf-gjahr.
wa_final-awkey = wa_ekexclf-awkey.
wa_final-exnum = wa_ekexclf-exnum.
wa_final-exdat = wa_ekexclf-exdat.
wa_final-lifnr = wa_ekexclf-lifnr.
wa_final-matnr = wa_ekexclf-matnr .
wa_final-maktx = wa_ekexclf-maktx .
wa_final-shcess_amt = wa_ekexclf-exaddtax1.
IF wa_ekexclf-capind = 'C'.
wa_final-capind = 'Consumables'.
ENDIF.
IF wa_ekexclf-capind = 'A'.
wa_final-capind = 'Assets'.
ENDIF.
IF wa_ekexclf-capind = 'T'.
wa_final-capind = 'Tools'.
ENDIF.
IF wa_ekexclf-capind = ''.
wa_final-capind = 'Raw Material'.
ENDIF.
IF wa_ekexclf-capind = 'N'.
wa_final-capind = 'Non Cenvatable'.
ENDIF.
IF wa_ekexclf-capind NE 'C' AND wa_ekexclf-capind NE 'A' AND
wa_ekexclf-capind NE '' AND wa_ekexclf-capind NE 'N'.
wa_final-capind = wa_ekexclf-capind.
ENDIF.
wa_final-exbas = wa_ekexclf-exbas.
wa_final-exbed = wa_ekexclf-exbed.
wa_final-ecs = wa_ekexclf-ecs.
wa_final-werks = wa_ekexclf-werks.
wa_final-ritem1 = wa_ekexclf-ritem1.
wa_final-rdoc1 = wa_ekexclf-rdoc1.
wa_final-docyr = wa_ekexclf-docyr.
wa_final-name1 = wa_ekexclf-name1.
wa_final-ktokk = wa_ekexclf-ktokk.
wa_final-excise = wa_final-exbas + wa_final-exbed + wa_final-ecs + wa_final-shcess_amt.
CLEAR :wa_tax.Hi ,
I think you are using the redundant selects to fetch the data from BSEG.
First select all the data into an internal table based on bkpf.
Now you can distribute the data into whatever tables you want using the loop,read-binary search and append statements..
Loop at it_bseg.
read it_bseg where
xxxxx
xxxxx
binary search.
append wa to it2_bseg.
endloop
This avoid several database fetches..
Thank you.. -
Backup DC past tombstone and need help replacing it with another DC with the same name and IP
Hey Everyone
We have a single domain in a forest with 2 DCs with AD integrated DNS configured. The primary DC with all the FSMO roles is a VM (Server 2008 R2) and the backup DC is a physical server (Server 2008 non-R2).
The backup DC's hardware is very old and has been giving us a lot of issues where the system would intermittently BSOD, freeze, black screen only etc. and as a result, the server was turned off for a very long time, definitely beyond the default tombstone
lifetime of either 60 or 180 days.
We want to replace this bad backup DC with another physical server which became available as a spare and is much newer and in a working condition hardware wise. We also wish to ultimately give it the same name (FQDN) and IP to basically make it an outright
replacement for the current bad backup DC.
My questions are:
1.) If we are in a position where the bad server could possibly physically boot and start the operating system and have network connectivity, will we be able to use DCPROMO as one would normally do to demote this DC, or will it have to be done forcefully,
while keeping in mind as I said that the DC is way past the tombstone lifetime period?
2.) If it has to be done forcefully, I am aware that the meta data needs to be cleaned up in AD on the working primary DC, although I have never performed such a process before. If this is done, are there any other things I need to look out for or do
before I attempt to replace it with the other server which I will set up wit the same name (FQDN) and IP, then add to the domain, and then lastly promote as per normal using DCPROMO?
I know we will have to upgrade the scema to 2012RM as the replacement backup DC will be running this newer operating system.
Anything else you wish to add or point out to me would be highly appreciated. Thank you in advance.
Regards,
CTVHi,
I would suggest please do the metadata cleanup using the script and then remove object from below DNS console and then run the repadmin /syncall /Aed
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Repeat running the vbs script till the wrong/unnecessary dc’s are removed.
Cross check the removal – dsa.msc [ad users and computers] > Domain Controllers OU
Adsiedit.msc
Expand domain partition, select OU=Domain Controllers, make sure only the necessary domain controllers are listed.
Delete the incorrect domain controllers.
Dnsmgmt.msc [Dns Management]
Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii. Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
Expand the forward lookup zones\domain.com folder
i.
Delete Host(A) records of dc’s which are non-existant.
ii.
Correct the NameServer (NS) records
iii.
Follow steps similar to ’ A ii ‘ >> ‘ A viii’
Dssite.msc [Sites and Services]
Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B. Delete incorrect subnet configurations [Sites\Subnets]
Delete incorrect site links [Sites\IP] -
My iphone / mac no longer recognize they are the same Itunes library. When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library. I have purchased items on the phone I don't want to erase them from the phone. The phone backs up fine, but won't sync.
File>Devices>Transfer Purchases from "iPhone" and then sync.
-
I have an iCloud email and Yahoo email on my iPhone that is now old as hacked and unused. I can't access anything as it asks for that account info and I don't remember the password etc. How do I delete and replace it with my new iPad email? ! Help..
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan. -
Hi, I have made a new Apple ID and logged in on my phone, settings > iTunes & app stores, but the app store is still using my old Apple ID. How do I get rid of the old ID and replace it with the new one?
HAYDONISRAD wrote:
... Maybe I'll stick with hers for now :-)
OR...
You could use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID? -
How do I remove an incorrect apple ID from an iPad and replace it with the correct one?
How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?
Hello Shy guy,
You can try this:
1. Go to the iTunes Store or App Store
2. Scroll down, there you will see Apple ID: "your email" (below Redeem and Send Gift)
3. Tap on that button
4. Tap on Sign Out
Now you should be able to use another Apple ID.
Cedric -
My Macbook Pro was recently stolen, and I have replaced it with a Macbook Air. I attempted to simply do a restore from the Macbook Pro's Time Machine backup, but since the new Macbook Air's hard drive is significantly smaller, a Time Machine restore was not possible. I even tried to choose only settings or only my User Profile (option) when restoring, but the backup was still too large to do a restore onto the new machine. How do I restore my more-expensive apps (ie iWorks) onto my new Macbook without repurchasing them? Also, I reaad somewhere that if you went to the Mac App Store and attempted to repurchase the app and clicked BUY, it would simply alert you that you have already purchased the app (and trigger a re-download)... NOT THE CASE... So I just dropped another $19.99 for a second copy of Pages... Not my intention....
Any help would be greatly appreciated.
LMyou should get a usb backup drive as well. time machine has limited use in my eyes. it saves things. but older things can be errased ad space drops without telling you
nothing beats data redundancy. 2 saves is. 1. and 1 is none
im personally not fond of time machne though i use it only for a recovery parameter for a mac
id never ever myself consider time machine a genuine data backup tool. though most do consider it as such
drive clones such as superduper and carbon copy cloner can clone your entire drive for emergency recovery. and you can boot from them as well o. another mac
Maybe you are looking for
-
Compatibility_level on SQL Server 2012 in-place upgrade
Hi all, Based on BOL, master and user databases' compatibility_level will not be changed to 110 on SQL Server 2012 in-place upgrade. Database Compatibility Level After Upgrade The compatibility levels of the tempdb, model, msdb and Resource databases
-
Not working Webutil configuration for linux
I had configured webutil in linux server as per document. my basic cofiguration is OS - Linux redhad(4.0) Front End - Forms [32 Bit] Version 10.1.2.0.2 Now i had created form in that form i m using webutil when on test button i m calling show_webutil
-
Can't download Photoshop Elements 10 upgrade
I have a brand new Windows 7 computer with 4GB RAM. Firefox is my browser. I purhcased the downloadable upgrade for Photoshop Elements 10 on the Adobe web site. When I clicked on the Akami Download Manager to download the product, I saw a flashing bo
-
How do I go to a web site when I click on a button ?
Hello I am going a GUI program that would go to a program or a web site when a button is clicked. What do I have to do to access a web site ? for instance: if (e.getSource() == myJButtonBible) // go to www.nccbuscc.org/nab/index.htm
-
Hello, Iam Malathi working as a HR-ABAPER for past one year. I have worked on BDC's , reports , user exits ,data dictionary and having knowledge on dialog programming and SAPScripts. I would like to know whether its advisable for me to take up the AB