Replace Smart AC Adapter for HP 17-E054CA Notebook

I have a new HP17-EO54CA and it came with a Smart AC Adapter. I keep getting messages that I should purchase a higher output AC adapter as it may be needed for some applications.
I don't know how to do this. i have Googled about as many combinations as I could think of, and I'm pretty good at finding things on the web, but I cannot find how to replace this adapter with a higher output one.
Any suggestions?
Thanks in advance for your help.
This question was solved.
View Solution.

Hi,
What is its wattage now ? Is it a 90W PSU which comes with the machine ? You may need a 120W charger. My loan machine (Envy 17 - same shape, size and very close specs) comes with a 120W charger.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I'm having a brand new unopened Apple 5W USB adapter from UK. I want an Indian version USB adapter. Will Apple Store replace my USB adapter for free of cost ?

I'm having a brand new unopened Apple 5W USB adapter from UK for my iphone 5. I want an Indian version USB adapter. Will Apple Store replace my USB adapter for free of cost ?

Perhaps, but maybe not, as what can they do with one with the UK plugs? I'm just saying regional things like that often have to be returned at a store in the country you bought them.
But, just go and ask as the worse they can say is no. If they do say no they cannot exchange it, then for very little money you can buy a UK-to-India plug adapter and use that charger in India anyway. Such plug adapters are only $2-$5 here in the USA on Amazon.

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken.

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken when fall down.

Hello vanexe,
Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Smart AC Adapter

I've been getting the following message on screen
The Smart AC Adapter connected will power your computer, but potentially at a reduced performance level. Your computer is designed to vary performance as needed when a smaller capacity Smart AC Adapter is connected. Resource intensive tasks may cause your system not to perform at its highest level with a smaller capacity Smart AC Adapter. Please connect a higher capacity Smart AC Adapter for full performance.
however I bought this HP Omen start of January, its essentially still brand new and came with a 120W charger which is exactly what I have plugged into my laptop when this message pops up. It didnt happen from day one only within the last week or so but still why am I getting this message at all?! I'm assuming it means my charger isnt optimal for my laptop.. but then why would the charger that came with the laptop not be the one best suited for its use?
Please help!

Hi @JasminJade ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Buying the right replacement power adapter for HP Envy

The original power adapter for my brother's HP Envy Touchsmart laptop has appears to have partially melted. I'm trying to find the correct adapter to use as a replacement, but I have questions because it looks like he will have to order one of the Smart adapters, which is not what he used originally. The product number is E0M27UA#ABA. If you need any more information just ask and I will try to post it as quickly as possible. Thank you in advance for any help you can give us.

Hi,
This is a list from Down under. You should be able to find similar site in your country:
http://www.psaparts.com.au/laptop-notebook/hp/envy-13-1050ea-battery-adapter-charger.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Replacement AC Adapter for W500

Hi,
I ordered a replacement AC adapter for my W500 and got a 135W (6.75A) can I use this when the old one is a 90W (4.5A)
TIA
Solved!
Go to Solution.

Welcome to Lenovo Community! keller
Yes, it should be workable as long as the new AC adapter provides more power than the old one, as well as having the same round connector.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Replace power adapter for Tecra 8100

Hi support,
I have Tecra 8100 where its original power adapter has died. I need to buy a new one, but I found that Toshiba has replaced the PA2444U adapter model with a new model. Which power adapter model that is now compatible with Tecra 8100?
Thanks. I really need an answer because I need to work with the laptop.

The Tecra 8100 will function with many adapters from Tecra 8000, 8200, 9000, 9100 and the M1, M2 range etc.
There are of course differences in the output current rating, but in practice it is still possible to use a higher output adapter without issue, provided the voltage is 15V DC.
For example, I am currently using a model PA2450U (15V, 3A) plugged into my Tecra 9100 port replicator and this works fine. The only potential down side is that it might take longer to charge the battery than it would with the correct model (which would be rated 4A).
This means you shouldn't have too much trouble finding a suitable substitute.

I was told in the shop i bought my iPhone 5 that Apple offer connection adaptator for docks to whom buy a 5 to replace à 4, i am surprise, does anyone know about it?

I was told in the shop i bought my iPhone 5 that Apple offer connection adaptator for docks to whom buy a 5 to replace à 4, i am surprise, does anyone know about it?

Restore the phone using iTunes. First time restore your backup. If the problem is not fixed restore again, and this time set up as New.

Replacement car adapter for insignia dual screen portable dvd player 7"

Where can I find a replacement car adapter for our insignia dual screen portable dvd player 7"?
Thanks

tiggerjackson –
I am so sorry that no one has reached out to you. Please
give us a call at 1-888-237-8289 and asked to be transferred to Insignia
Products. Again, I apologize for the delayed response.
Kind regards,
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

How to replace power adapter for PowerBook G4

I have a three year old powerbook G4 and the power adapter is toast (at least I think that's the problem). Doesn't charge and no illuminated ring around the connector to the computer.
Does anyone know how to replace this? Can't find it anywhere online or at Mac retailers.
Thanks.

Replace the power adapter plug? Most folks won't bother, it's a hassle. The whole adapter is easily available from any Mac vendor. But before replacing anything, have you tried the following:
-reset the Power Management Unit (PMU)
http://support.apple.com/kb/HT1431?viewlocale=en_US
-reset the PRAM
http://support.apple.com/kb/HT1431?viewlocale=en_US
-unplug the power adapter from the wall socket for a while to reset.

Replacement haml mini wifi adapter for HP 2000-2b89WM

Hello, Can someone please point me in the direction of a compatable half mini pci wireless adapter for an HP 2000-2b89WM. It currently has a ralink RT5390 that is no longer recognized. I searched the forum and looked under product information here http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&...
with no luck. Thank you.
This question was solved.
View Solution.

Hi:
Click on the link you posted, then click on the user guides tab.
Click on the Maintenance & Service Guide and in chapter 3 on page 18, you will find the list of supported WLAN cards with their HP part numbers.

Could I have got a new power adapter for free?

My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
I read the following on the apple website:
Additional Information
Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
Just wondered if anyone could clarify :-)

As you indicated, it depends on the results of the evaluation.
Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

Replace smart object script

Disclaimer: I do not know how to script, but am willing to learn and am looking for advice.
I need to replace the text in a smart object from a data list then save the updated file using the smart object text. Is there an existing script that will do this?
I cannot use a straight text layer because I'm performing a free distortion warp on the smart object that does not work on straight text. Using variables seems like a logical solution, but the only variable type for smart objects is "visibility".
Plan "B" is to "replace smart object" with a series of PSD files containing the appropriate text. This works great, but I don't know how to automate it. I can easily create the series of PSD files using variables, but don't know how to automate their insertion into the template containing the distorted smart object.
I'm looking forward to learning something new!

I took a quick look at your script.
I do not know where the the displacement map come in,
The script seem the be replacing the object content of the current smart object layer.
That layer can have had all sort of photoshop functions associated with it and has an associated transform. All smart object layer have an associated transform and may have smart filters and filter mask as well.
I see no code to handle the smart object size and make the replacement object have the same size or insure the replacement object is the aspect ratio and size. Replacing a smart object content does not change the current layer's associated the transform that transformed the original object. If the replacement object is not the same size as the original object the transform may not work like your expecting.
An associated displacement map may come into play because of smart filters on the smart object layer. Displacement maps content are either for the layers content or for lower layers content to make the current layer to conform to lower layers contours.
In fact I create a four image picture package template that used a smart object for the image. Added CS2 for a file type that could be used to replace the image in your script and ran your script. It did pop up the ACR dialog if I select a raw file but it worked perfectly for my portrait cr2 files are the same size and aspect ratio. Ast the object.
And a jpeg was saved to my desktop.
When a different size landscape orianted portrait image is selected here is the result

Batch Replace Smart Object With Different Image Quality and Sizes

Hi there,
I need help. I have this template that is in 1000x1000pixel and 300 dpi. I'm trying to replace the smart object inside with various JPEG that I have. These JPEG comes in large image sizes but lower than 300dpi. The issues is, when I run the script that I have, some of the pictures become really pixelated. Beforehand, I resized them to fit into the empty place in sizes that I find fit the best (8 cm x 6 cm). Some of them work okey, but then some of them just pretty bad. I'm wondering if you can help me fix the script that I have so I didn't have to resized the images before running the script, and for all of them to automatically fit into my template without altering the quality of the image that I put in.
below is the script that I am using and the screenshot of my template:
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
var theName= myDocument.name.match(/(.*)\.[^\.]+$/)[1];
var thePath = myDocument.path;
var theLayer = myDocument.activeLayer;
// psd options;
psdOpts = new PhotoshopSaveOptions();
psdOpts.embedColorProfile = true;
psdOpts.alphaChannels = true;
psdOpts.layers = true;
psdOpts.spotColors = true;
// check if layer is smart object;
if (theLayer.kind != "LayerKind.SMARTOBJECT") {alert ("selected layer is not a smart object")}
else {
// select files;
if ($.os.search(/windows/i) != -1) {var theFiles = File.openDialog ("please select files", "*.psd;*.jpg;*.jpeg;*.tif", true)}
else {var theFiles = File.openDialog ("please select files", getFiles, true)};
if (theFiles) {
// work through the array;
for (var m = 0; m < theFiles.length; m++) {
// replace smart object;
theLayer = replaceContents (theFiles[m], theLayer);
var theNewName = theFiles[m].name.match(/(.*)\.[^\.]+$/)[1];
//Raise color picker for Back cover;
try {
app.activeDocument.activeLayer = app.activeDocument.layers[app.activeDocument.layers.length - 1];
// =======================================================
var idsetd = charIDToTypeID( "setd" );
var desc7 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref2 = new ActionReference();
var idcontentLayer = stringIDToTypeID( "contentLayer" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref2.putEnumerated( idcontentLayer, idOrdn, idTrgt );
desc7.putReference( idnull, ref2 );
var idT = charIDToTypeID( "T " );
var desc8 = new ActionDescriptor();
var idClr = charIDToTypeID( "Clr " );
var idsolidColorLayer = stringIDToTypeID( "solidColorLayer" );
desc7.putObject( idT, idsolidColorLayer, desc8 );
executeAction( idsetd, desc7, DialogModes.ALL );
} catch (e) {};
//save jpg;
myDocument.saveAs((new File(thePath+"/"+theName+"_"+theNewName+".jpg")),psdOpts,true);
////// get psds, tifs and jpgs from files //////
function getFiles (theFile) {
if (theFile.name.match(/\.(psd|tif|jpeg|jpg)$/i) != null || theFile.constructor.name == "Folder") {
return true
////// replace contents //////
function replaceContents (newFile, theSO) {
app.activeDocument.activeLayer = theSO;
// =======================================================
var idplacedLayerReplaceContents = stringIDToTypeID( "placedLayerReplaceContents" );
var desc3 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
desc3.putPath( idnull, new File( newFile ) );
var idPgNm = charIDToTypeID( "PgNm" );
desc3.putInteger( idPgNm, 1 );
executeAction( idplacedLayerReplaceContents, desc3, DialogModes.NO );
return app.activeDocument.activeLayer

Thank you for your answer.
I was resizing it before from bigger image size to a smaller one (121 cm to 8 cm) which fit my template size. But the dpi remains in 72 which makes the picture pixelized.
I am wondering if I can find a script that will keep the size of the first image that I put on the template for other images that I place, regardless the size they are imported to. Basically, how to make them all fit into the template regardless the size.
Thank you for the info about the scripting forum. I will write there too.
Sorry, I'm so new to this

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Replace Smart AC Adapter for HP 17-E054CA Notebook

Similar Messages

Maybe you are looking for