Replace the Hot Spare that Shared between Raid 1 and raid 5

I have ProLiant ML370 G6 with Smart Array P410i Controller on System Board
I have two Logical Drive (Logical Drive 1 - Mirroring (RAID 1) And (Logical Drive 2 - Distributed Data Guarding (RAID 5)
The logical Drive 1- Mirroring (RAID 1) Have two Physical Drives
The Logical Drive 2 Distributed Data Guarding (RAID 5 Have three Physical Drives
And There Are One Spare Drive Shared btween RAID 1 and Raid 5
Controller Configuration Summary
2 Data Array(s)
2 Data Logical Drive(s)
5 Data Drive(s)
1 Spare Drive(s)
The problem :
there are that the spare Drive FAil and have warining To replace it
I replace this drive with new one but the repulid for the Drive not start and Give Inactive
How Repulid the Hot Spare drive ?

Hello Amostafa,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are looking to rebuild the hot spare drive on your ProLiant system, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

When to replace drives, and when does the hot-spare kick in?

Here's the situation: got an e-mail today from the RAID (no it wasn't a love letter), which alerted me to a ten-times repeated ERROR: 0x10, STATUS: 0x51 on drive 8
I then proceded to check through the log, and found from a while back (mysteriously I never received an e-mail even though it said it had sent one!) ERROR: 0x40, STATUS: 0x51
which were however only single/double incidents, not repeated 10 times like this latest error.
Despite these errors, the drives show up as "OK" in RAID Admin, and the hot spare drives seem not to have been activated.
The question is now, should I get these drives replaced ASAP, or if the RAID lists the drives as OK is everything fine and dandy? (not sure how to take a "non-recoverable error 0x40" and reconcile that with a drive status of OK)
Ronald

Nobody's got any answers? Bummer! The Apple manual says really nothing useful about how to aAsSsSeEsSsS error messages and when to replace drives, etc.
It's nice to sell to people that a RAID-5 will keep the data safe, but that only works if one knows what to make of the error messages.
I shouldn't have to spend another $1k for a tech support contract, just to learn what things mean that should be explained in the tech docs...
Ronald
PS: will someone tell Apple's PC watchdog that aAsSsSeEsSsS has nothing to do with aAsSsS? AaSsSsEeSsSsMmEeNnTt is a technical term, yet it wouldn't want to let me post the message because it contained aAsSsSeEsSsS! What's next? Soon we can't use the word RAID anymore, because it's refers to undesirable violence...
Someone please pick up a dictionary, in Tiger there's both a regular app and a widget to do so, so it shouldn't be that hard...

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
Any ideas on the subject would be most helpful
Thanks in advance
Dingoh

The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
So, are you on version 9.2.1?
Was it Tiger or Leopard you had on the drive before?
iTunes 9.2.1 download...
http://support.apple.com/kb/DL1056

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

Internet sharing between cellphone and computer us...

I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??

24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I would like Adobe to develop a programme that sits between Lightroom and CS6

I have Lightroom 1, 2, 3 & 4 (which I can't use at the moment because it is too slow) I also have CS3.
I am an enthusiastic amatuer and don't need the catalogue facility in Lightroom (which can be exasperating at times) and I don't need 90% of the stuff on CS6 as I do most of my editing in Adobe Camera Raw.
I would like to see Adobe develop a programme that sits between Lightroom and CS6 where the Lightroom layout is kept much the same only instead of a catalogue have a browser in its place, I would also like to see the clone tool & the healing brush replaced with proper ones that work like the ones in CS6, I would also like to see an adjustment brush with a facility to invert my selection or some sort of masking, these are the tools I use most often in photoshop.
Does anyone feel the same as me and if so how do we contact Adobe to let them know.

Butch_M wrote:
JimHess wrote:
I think it's really presumptuous for anyone to dictate how someone else should handle their post processing or their file management.
I think it is extremely presumptuous of you Mr. Hess, to confuse honest, friendly advice with an attempt to "dictate" how someone should handle their workflow ... my comment was offered as advice ... I was not handing down an edict to force anyone to do anything ....
It's one thing to bury your head in the sand and ignore sound advice ... it's quite another to accuse others of forcing their will on someone ... just because you had a bad experience about discussing another feature in another thread ...
I could really care less if you, the OP or anyone else doesn't adopt a sound DAM solution ... I don't have to work with your images ... but if I did, you can be assured they would be properly cataloged even if you didn't see the value in the process ...
Whateve.

Any issues with file sharing between Windows and latest Mac client?

We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
Thanks,
Matt

No, There isn't a bug with file sharing between Mac and Pc client.
2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
Also you can check below links
http://support.microsoft.com/kb/2952672/en-us
http://support.microsoft.com/kb/2880474/en-gb
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

ITunes sharing between Mac and PC is not working

iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

Why isn't sharing between SL and Windows7 stupid simple?

I'm a fairly smart guy, but I have to admit, I'm stumped here. I have a Mac Mini running Snow Leopard and a Toshiba Laptop running Windows 7. I cannot for the life of me figure out how to share files between the two. I'm currently using Dropbox, but that ain't gonna cut it for much longer.
I've got SMB sharing turned on in System Preferences, and I think I've got Windows7 set up correctly, but really, who the **** knows?
Why is this so hard? I've even got Bonjour for Windows installed, but after running the installer there's no sign of the app anywhere on the laptop. Searching for it turns up zero results.
Anybody have any ideas what I'm doing wrong? I really don't even need two-way sharing; I simply want a way to transfer files FROM the PC TO the Mac in the other building. The Mac is sharing the drive in question; I just want to be able to write to it.

Andrew Taylor9 wrote:
I have a Mac Mini running Snow Leopard and a Toshiba Laptop running Windows 7. >I cannot for the life of me figure out how to share files between the two.
I've got SMB sharing turned on in System Preferences, and I think I've got >Windows7 set up correctly, but really, who the **** knows?
The Shadow, er, I mean the Ghost knows. On Win7, have you turned on file sharing the the Network and Sharing control panel? I wouldn't try password protected sharing now. Have you shared something on the Win7? If not, then pick, say, your Documents folder, right click on it, and choose sharing. I don't recall exactly what you will see, but the idea is to share the folder with everyone (this can be changed later).
Why is this so hard? I've even got Bonjour for Windows installed, but after running the installer there's no sign of the app anywhere on the laptop. >Searching for it turns up zero results.
You shouldn't need Bonjour. It's a waste of time. OS X/Windows sharing is very easy. Just make sure that trying to use Bonjour is not getting in your way.
Anybody have any ideas what I'm doing wrong? I really don't even need two-way sharing; I simply want a way to transfer files FROM the PC TO the Mac in the other building. The Mac is sharing the drive in question; I just want to be able >to write to it.
On the other side, having smb sharing selected is a start. Be sure file sharing is selected on your Mac. You may end up wanting to share both ways. And, you might make sure your Win7 and Mac are in the same workgroup. Use the workgroup of the Win7--presumably "workgroup." For this step, Go > System Preferences > Network > Advanced > Wins.
Also, on your Mac, under Sno, you probably will have to use Go > Connect to Server--smb://IpAddress (or computer name) to connect. The Win7 is not very likely to show up under "Shared" as it should because you are using Sno. Your Mac should show up very readily in Network on the Win7. The hard part of sharing between Win7/Sno and Vista/Sno is the Sno part.
Post back with problems/questions.

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Difference between HARD and RAID

hello
Any one please tell me what is difference between HARD and RAID??
regards
liakat hossain

Liakat wrote:
hello
Any one please tell me what is difference between HARD and RAID??
regards
liakat hossainNever heard of "Hard" . Where is it mentioned? Can you post the link or document/book name?
Raid is a way through which storage can be managed.Fairly popular technique, search over Google for it.
http://www.google.co.in/search?hl=en&rlz=1C1GGLS_enIN327IN327&q=what+is+RAID&btnG=Search&meta=&aq=f&oq=
HTH
Aman....

My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If I try to add the email address that I now use (and which is my Apple ID on the computer), it won't allow me to add it.

My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If (while on the iPad) I go to My Apple ID and try to change or add the email address that I now use (and which already is my Apple ID on the computer), it won't allow me to add it. It says : "Email address is already verified for another Apple ID" I haven't really been aware of this as a problem until I tried (for the first time) to sync my iPad to the computer and became aware that certain things wouldn't transfer. What is the solution to this?

What are you having problems with ?
This post was about having updated the primary email address on an iTunes account via a computer - if you do that you might need to log out of the account on an iPad by tapping on the id in Settings > iTunes & App Store and then log back in with the updated version of the account for that email address change to be recognised on your iPad. If you don't log out and back in then an iPad (or iPhone or iPod Touch) might continue to show the old version of the iTunes account id.

Replace the Hot Spare that Shared between Raid 1 and raid 5

Similar Messages

Maybe you are looking for