Replace the inspire 5.1 digital 5500 with the creative labs ddts-100 decoder upto 7.1

i bought the inspire 5.1 digital 5500 i was wondering if you can change the decoder with the creative labs ddts-100 digital decoder upto 7.1 they have it on ebuyer thanks...

joseru,
Duplicate thread.
Cat

Similar Messages

  • What speakers work with the Creative Labs DDTS-100 Digital Decoder-Upto 7.1

    what speakers do the Creative Labs DDTS-100 Digital Decoder-Upto 7.1 work with thanks

    Unless the Digital 5500 speaker set has analog inputs it can't be used with the DDTS-100. You must connect the DDTS-100 to a speaker system through the analog outputs either from the main unit or the switchbox. I have not heard of any cables to convert analog audio into digital form so digital speakers can understand and play it.
    The best speaker system? I have absolutely no idea dude. You must be the judge of that, if it is you who are going to listen to it. I like my S750 system but that is me. You have to read loads of info and reviews and preferably listen to them in a store if you can.

  • Creative Labs DDTS-100 Digital Decoder

    I am desperate to get hold of a new one of these. Im in the Uk does anyone know where I can buy one. I would be very grateful for any help. Thanks

    Hi mate Ebuyer sell them ?99.97 thats with VAT included

  • Rear speakers mapping over front speakers Inspire 5.1 Digital 5500

    When I wanted surround on my pc a few years ago, and didn't want to buy a new speaker set, I hooked up my Inspire 5.1 Digital 5500 to my Audigy 2 ZS. The only way to do this was by plugging the different speaker inputs directly from the subwoofer connection panel into the various output ports of my card. Thus skipping the 5500's decoder/volume control device which is only hooked up to provide power to the sub/speaker system. Volumes are set on the audigy card itself.
    This has worked fine for a few years and gave no problems whatsoever upto now. Even to the point where I replaced my Audigy 2 for a X-FI Fatality because I thought my soundcard was screwed. With the X-Fi it worked correctly for a day and then it went wrong again. I can't get it to work right and am clueless what the problem is. But I presume it's something in the speaker system.
    What happens is as follows:
    My rear channels are so soft they almost sound muted. Changing the settings/levels in the speaker settings or THX calibration doesn't make any difference whatsoever. And the majority of the sound that has to go to the back gets mapped on the front speakers. This is also the case with the speaker test and not a dolby/dts/surround problem.
    Front Left is ok
    Front Right is ok
    Front Center gets played by Front Center AND Front Left (soft volume) AND Front Right (soft volume)
    Rear Left gets played by mainly FRONT Left (and very softly on Rear Left)
    Rear Right gets played by mainly FRONT Right (and very softly on Rear Right)
    I rewired, checked cables, (replaced the soundcard from Audigy 2 to X-FI), reinstalled drivers and reinstalled windows. I'm now clueless and got no idea how to get it fixed.
    I also tried hooking them up through the optical cable on the X-FI bay and having them properly wired to the 5500's decoder device. But that was even less successfull (only getting a lot of static white noise and no audio signal whatsoever) I also read this won't get me surround anyways except for when true surround sources get played (dvd playback etc), so I stopped going down that path and have them back on the normal minijack plugs.
    Please help. I don't want to have to invest in another speaker system. Especially not after the expensive audio card replacement which apparently wasn't necessary.
    I also don't get it how a rear signal can end up on the front speakers. When they are seperate cables. Or is there a decoder in the sub-unit as well which may have been broken?
    Thanks in advance.
    Message Edited by senjin on 04-11-2007 09:50 AM
    Message Edited by senjin on 04-11-2007 09:51 AM

    I have this exact same issue. I just purchased the X-Fi ExtremeGamer with the Digital I/O Module. I've tried both Coax and Optical, but I get no sound in the rear speakers. 6-Channel Direct works just fine.

  • DDTS-100 decoder with Inspire 5500 speakers?

    I've been a very content owner of the Creative Inspire 5500 set (decoder and speakers) for two years now, but just recently my decoder has been playing up. I wish to purchase the DDTS-100 decoder and was wondering if I may use the speakers from my present Inspire 5500 set? The speakers are 5.1 - 8W RMS sub, with five 6W satellites. The speakers are similar (if a little less powerful, I think, than those with the Inspire 5700 set. Is this OK? I searched the archives for a mention of people using this set-up, but can't find any posts concerning this. Thanks for any forthcoming help!

    kyle_hunt85,
    Hitting the tab key perhaps? Gets me every time.
    Daniel

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I can't open my digital book. Mis180 They said that the vendor account is not associated with the it

    I can't open my digital book. Mis180 They said that the vendor account is not associated with the item I am trying to open.

    This is the Reader forum. The Digital Editions one is here:
    http://forums.adobe.com/community/adobe_digital_editions

  • While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

    While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

    This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

  • Contact photos are not showing up in Mail message list, even though the message will link to the contact card in Address Book with the photo in it.

    I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

    I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

  • The vendor account is not associated with the file you are trying to open.Please try again.

    Please help me to understand what is the problem with the set up of the program. I bought an ebook from an internet site to which my IP address was blocked (in country 1). My brother bought it on a computer in country 2  and wanted to download and send me the file so I can open it on my computer. He set up initial download without Adobe ID. Afterwards he downloaded the pdf and send it to me. I tried to upload it  with my ADE reader but it didn't work without ID. My brother then deleted afterwards his ADE and installed it again, downloaded the ebook again but this time setting up an ID. He transferred me the file ,I used the same ID  but then the following message appeared "The vendor account is not associated with the file you are trying to open. Please try again." . Can this be fixed somehow? I cannot open the URLLinks even as there is no connection from my IP , but I have the pdf file ( ebook) but I don't know how to set up the program.

    Sorry Everyone this error message appeared in Digital Editions 4 used on a windows 8 laptop.  Thanks Chris

  • I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

    I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

    Im wondering why my post hasn't been answered yet.  I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him.  I can understand why my phone couldn't be replaced because of the small crack.  I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems)  but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update.  I dont think it is fair to have to pay that as well. In addition,  because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm.  Verizon has cut this off.  Im very dissatisfied and I have been a customer of Verizon for 13 years.  Im hoping for a response this time.

  • Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
    Allan

  • Run the data copy and comments copy with the same key

    I want to Run the data copy and comments copy with the same key.
    I tried to challenge in the following way, but it is an error.
    1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
    2. Select the newly can process chain to add a package, make a change to the script as follows:
    PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
    PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
    PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%ACTNO%,%INCREASENO%)
    INFO(%SELECTION_KEYDATE%,)
    TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
    TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
    TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
    TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
    TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
    TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
    TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
    TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
    TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

    We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
    Also check these references for performing lookup in DSO.
    abap code to populate data from DSO
    something about SAP: How to look for DSO’s tables?

  • Am I the only one experiencing battery drain with the 6.1.3 upgrade?  It went from 100% to 63% in 7 hours WITH NO USE!

    Am I the only one experiencing battery drain with the 6.1.3 upgrade?  It went from 100% to 63% in 7 hours WITH NO USE!  I've had worse luck with the i5 than the i4.  This is the first time I regret being in a two year contract.  I might add that this is my 3rd i5

    So now 12 days later and another replacement I'm still having issues and apple still isn't helping. My phone has started shutting off unexpectedly again today. Does anyone have any suggestions on where to go from here?
    <Edited by Host>

  • Why is the SHB12x-B12X LVDS cable made with the connections reversed on each end of the cable?

    Why is the SHB12x-B12X LVDS cable made with the connections reversed on each end of the cable? Pin 1 on end end of the cable maps to pin 73 on the other end of the cable, etc.
    Attachments:
    LVDSCableFlipPic.png ‏32 KB

    Hello sholm,
    The NI SHB12X-B12X LVDS cable is used to interface with specific devices which use the12X InfiniBand connector. The online product page for this cable recommends using the NI SHB12X-B12X cable to connect the 12X InfiniBand connector on the NI 656x high-speed digital instruments with other NI accessories such as the NI SMA-2164 to break out cable signals for direct access.
    NI SHB12X-B12X LVDS:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/201704
    NI PXI-6541:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/13820
    NI SMA-2164:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/201705
    Correct communication between the devices mentioned above requires that the connections be reversed. 
    Regards,
    J_Bou

Maybe you are looking for