Replace with HP spare
I'm planning to do some changes on my Pavilion e-070sl, like adding extra RAMs and an ssd. But i see a ,, Replace with HP spare'' sticker on the RAMAXEL( Elpida) stick, also on the hdd. Knowing that Bios is locked ( only Probook series have an unlocked bios) does that mean i can do replacements only with Hp recommended parts?
Also can i buy ram with another latency, other than the 11 seen on the existent ram, like 9? Who would gave me the guarantee that 16 GBs would work fine ( Crucial scanner shows me that). I see that i need DDR3L, crucial does not have that ''L'' letter, but it does saying 1.35 V.
Any thoughts? Thx in advance.
This question was solved.
View Solution.
The "whitelist" never applied to anything other then wifi cards and may now be a thing of the past for recent production models. In any event, you have nothing to fear as far as memory. You can use anything compatible.1.35 volts is low voltage whether it has the "L" or not. You are very safe buying from crucial. If you buy it from the page for your model, crucial will guarantee it is compatible. I would not worry about the latency, just get what crucial recommends. Here is the Manual:
Manual
See page 53 and note the instruction that you should update the BIOS before adding memory.
If this is "the Answer" please click "Accept as Solution" to help others find it.
Similar Messages
-
Recently my laptop was damaged. I sent it to HP, and they said that they couldnt repair it. So I took it apart and decided to have a look at it for myself, I found that some pieces have a little sticker on them that says " Replaced with HP Spare". Does this mean that these parts are new, or repaired, or what?
Camthomas015
Welcome to our HP Community Forum.
Commentary
I would speculate that Spare Parts are just that: Refurbished parts or perhaps new parts from notebooks that were used for spare parts when no new parts were to be had from the Parts Department.
So, speculation has an odd, uncomfortable, Eww flavor to it: You still don't know the answser and now you are left wondering what is going on!
I believe this question is best asked directly of HP and answered by HP as well.
You should have your case number information available when you contact HP -- this will make it possible for HP to track down your notebook's repair history.
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
======================== ===============================
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link. -
when i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?
Regarding your broken, previously authorized computer, here's how that works:
You would authorize your new computer -- maybe you've done that already. Then you will have two computers authorized. Apple allows you to have up to five computers authorized at any time. If you get to five, you can then go to your account details in iTunes and remove all authorizations.
Bear in mind this is not saying you can synch to more tham one library. Razmee209 and gdgmacguy's comments above are correct. But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes. -
I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.
-
Find and replace with multiple files and with a watch folder
I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakersWhen you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace -
It's always worked until this past week, nothing changed by user that I know of. I've checked pop-up blocker to no avail. Using Avira free security, it updated a few days ago, did a restore after it was updated to before the update, didn't help either. Want let me open Hughes net mail in Fire Fox at all. Can access it from Explorer but hat Explorer, it's slower than Fire Fox. Any help is appreciated as I've run out of ideas.
I am not entirely sure what problems you are reporting.
# Home Page are you able to set that as required or not ?
#Webmail
#* I am not clear, are you able to open that with Firefox ?
#* I understand you are able to open it with Internet Explorer
Are you saying that your webmail is set as one of your home pages, but that it is replaced with something else ?
Do other websites and searches work ok in Firefox or are you also having other problems in Firefox use ? -
I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?
Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/ -
Bought my iPod 10months ago, now the battery life is really bad!!! I need to know if I can get it replaced with the guaranty! Thanks :)
I'd make an appointment at your local apple store, have them check it out and see what they say. If they determine that it's a manufacturer's defect then they may replace it.
In case they do, I'd do a full sync and backup before you take it in. -
HT4191 Notes getting mixed up and or replaced with other users i-phone?
For some reason whenever I sync my i-phone 4s and my wife syncs her i-phone 4 to itunes on our laptop which is a compaq(I don't know if that might be a problem) by the way, some of her notes always gets deleted and gets replaced with my notes, and she'll have just a couple of her notes but most of mine. It's been driving us crazy for months now cuz we can't figure it out! Do we need to sync our phones on different computers? Is there a setting that I'm missing? What are we doing wrong????
Please let me know whether you experience the following issue, and submit feedback (or if you are an Apple Developer, a bug report). This issue is not related to synchronization.
Title/Subject:
Contacts 7.1 replaces one contact's Notes with another contact's Notes
Summary:
This issue's significance is severe because data is permanently lost: After searching for contacts and editing one of the contact's Notes, all found contacts' Notes are replaced with the changed contact's Notes.
Steps to Reproduce:
1. Launch the Contacts 7.1 app in OSX 10.8.2.
2. Search for a string that appears in several contacts' Notes field.
3. Click on one of the contacts in the search results.
4. Ensure that "Edit Card" mode is NOT enabled.
5. Alter the found string in the contact's Notes field.
6. Click on a different contact in the search results list.
Expected Results:
The change is saved and the changed contact disappears from the search results list.
Actual Results:
All found contacts disappear from the search results list, and all found contacts' Notes are replaced with the changed contact's Notes.
Regression:
This issue did not exist in OSX 10.7's Address Book app. I have not had the opportunity to test earlier releases of OSX 10.8's Contacts app.
Notes:
Example:
Suppose a search for "P1" finds three contacts:
Name: Alan | Note: Ask permission. P1
Name: Betsy | Note: Backup files. P1
Name: Charles | Note: Call. P1
While "Edit Card" mode is NOT enabled, in Alan's note, change "P1" to "P2". Then click on Betsy in the search results list. Betsy and Charles' Notes are erroneously and permanently replaced with Alan's Note:
Name: Alan | Note: Ask permission. P2
Name: Betsy | Note: Ask permission. P2
Name: Charles | Note: Ask permission. P2 -
My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?
Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy -
I had my iphone 4 stolen, replaced with new one same day and downloaded info saved to the cloud. The next day all that info disappeared and have not been able to get any of the old info back. Is there a way to get this info.
I think you will have to do a complete restore--you will lose any info added since last backup. Connect phone to computer, select it in souce list. Next, click on Summary tab, click Restore. In the next dialog box, click Restore--your phone will be erased and the latest software will be installed. Click agree to terms and phone will restart. Then you will see the phone setup screen--click on Restore from Backup and select the most recent backup. Obviously, this will only work if you have a backup on the computer. If not, check Set up as New Phone, click continue, then wait for the process to finish.
-
i have just installed itune again. now when i sync it, it show me warning that all existing music will be replace with new itune which is empty. h
ow can i keep my pervious files of music photos and other files and sync with new installed ituneUse your backup copy of your computer to put everything back on the computer.
-
I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????
http://support.apple.com/kb/ht3406
-
Why can I no longer find my iphotos? Updated from 10.6 to 10.8.2 recently... The iphoto logo in my dock has been replaced with a transparent, grey, question mark... why? How do I restore my iphotos? Searched for them in Finder, and in "search"... they appear as text only.. but no photos.. please help.. Mark
Have you verified that the iPhoto applications is not in the Applications folder or somewhere else on the hard drive?
To do so download and use Find Any File to search for "iPhoto.app" because FAF can search areas that Spotlight can't. If the application is somewhere else on the HD FAF will find it. However, I doubt that it will be there but it's worth a search.
OT
Maybe you are looking for
-
Animating Pictures or Text Captions
Hi Guys Is there any way of getting more animation of Text Captions or pictures, other than simply fading them in? I know there is the option of setting up and using the 'Text Animations' but I find the text formatting options very limited. Notwith
-
BI Apps DAC error while building execution plan
While building execution plan in DAC i am getting following error. C_MICRO_INCR_LOAD_V1 MESSAGE:::group TASK_GROUP_Past_Due_Cost for PLP_ARSnapshotInvoiceAging is not found!!! EXCEPTION CLASS::: java.lang.NullPointerException com.siebel.analytics.etl
-
How to integrate Sliding picture menu with Bubble chart
Hi I have a Bubble chart as below for sales X axis = Amount (ex- 2500045) y axis = Deal age (ex- 15) z axis = stages (ex- quotation/negotiation/closed/lost) I have datas for 5 sales rep with different stages Next is a Sliding picture menu This has pi
-
I recently dropped my ipod second gen into the toilet. It stayed in the water for less than 10 seconds and then I put it in rice. After two days of my ipod being in the rice bag I took it out to charge it. Once I charged it I saw that the battery was
-
Authorisation Object in Order & Notification for Partner
Dear All, Does Maintenance Order or Notification has an Authorisation Object which has Partner as an Authorisation field? My requirement is to restrict the view & Change Authorisation based on the Partner assigned in the Notification & Order. Regards