Replace Yosemite with Mavericks?
Yosemite is not good for my iMac mied 2011. Can I Replace Yosemite with Mavericks?
No. The only thing you can do is to erase the disk and then reinstall Mavericks.
You can only do that if you still have a copy of the Mavericks installer because it is no longer available from Apple.
Similar Messages
-
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Downloaded and installed os x yosemite on iMac that was purchased originally with Mavericks. When power button is pressed I get start up audio tone and then the the black screen with the white apple symbol with the progression bar. The bar moves very slowly two about one third and then the mouse cursor appears and there it stalls for around two minutes. After the wait the login screen appears and it operates normally. This whole process before update would only take maybe 30 seconds.
If I try the web recovery process it will revert back to Mavericks any suggestions on what this might be. I do have an external Mac passport pro external drive that does have time machine enabled and has been there for months.
ThanksAfter spending a number of hours with Apple Care personnel I was connected with a supervisor and finally got the iMac to boot up on every attempt and in a reasonable amount of time. Login screen now comes on in 30 to 40 seconds and computer is usable within a total time of 1 minute to 1minute 30 seconds.
Here was the process. Tried to download whole operating system with reinstall from utilities menu at power on and at 7 hours progress bar stalled at one third the way. Reason, time machine external hard drive was still connected during process. Disconnected all external connections except power and tried download again. This time whole operating system downloaded in 15 to 20 minutes. Yosemite installed and rebooted automatically and booted to login screen, signed in then to desktop, but boot took around five minutes. Shutdown and connected all peripherals, i.e.. ext. HD, DVD, printers and tried to start. iMac stalled at 2 minutes into progression bar with white apple symbol before login screen. Removed peripherals and tried again and still stalled and would not boot.
What was done to correct is as follows. Started iMac in Safe Mode, cleared all items in cache from Macintosh HD/Library folder and System /Library folder, system start up items, launch agents, and launch daemons contents cleared, removed printers in system preferences, ran disk utilities verify and repair of disk and disk permissions. Shutdown and removed power from iMac. With no peripherals system then booted normally. Reconnected peripherals while iMac was still on and added printers back to system preferences and all is well.
So it seems only reasonable that the downloading problem was hindered by the time machine external hard drive, to which an Apple rep. agreed and the extremely slow boot up or stalled boot up was caused by items in the start up and launch folders. I will state here that I was using my ISP's anti virus software for the Mac which was in the launch folders and most likely was causing the boot up problems. -
When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
It was easy to do prior to mavericks using system preferences (language and text), but now I can only submit a 2 letter word to replace, not a 1 letter word. I have tried using a space but it doesn't allow that. I would assume that most people would love to be able to type quickly without having to make uppercase I all the time (first world problem i know), so I can't understand why apple have removed this feature.There is the shift key, or text replacement approach, providing you have enabled two things:
Edit > Substitution > √ Text Replacement
System Preferences > Keyboard > TextClick + to add a replacement
Replaceii[spacebar]
With
I[spacebar]
Press return
Quit System Preferences
Now, when you type ii, you will see a pop-up offering I.
In the OS X App Store, search for WordService. This free collection of Services will enable you to just type your content, select it, and then choose the Service item, “Initial Caps of Sentences.” It does what it says. -
I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
Thanks, I was thinking so. I installed my CS4 from a CD in 2008, and it looks like Adobe has taken another approach to selling their products. I'll be downloading CC Photoshop a little later today.
cw
From: Brucgovn <[email protected]>
To: Chris Warot <[email protected]>
Sent: Saturday, May 2, 2015 11:27 AM
Subject: I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
created by Brucgovn in Adobe Creative Cloud - View the full discussionYes, you will get full version Photoshop cc 2014 as well as Lightroom CC 2015 with Photography plan If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505683#7505683 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505683#7505683 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Can I mirror my ipad mini to my new imac with Yosemite (or Mavericks?)
Hello!
I would like to mirror what is on my ipad mini to my new imac with Mavericks 10.9.5 or Yosemite. (In about this Mac, it says 10.9.5, so I guess my question would apply to either Mavericks or Yosemite, since I can update if needed.)
I have seen old posts about this, saying that you must use additional 3rd party software.
Is this still the case, or have things changed with new macs and Mavericks 10.9.5 or Yosemite?
Is there a way to use Apple TV to do this? or Is Apple TV only for HDTVs?
Thanks!Thank you, Demo! I had no idea that was possible. Looks like that would be the answer, except.....
I did some additional research just now, and it looks like it was a blessing to me that my new imac didn't come with Yosemite, like advertised, because forums say my Adobe CS3 won't work with Yosemite.
Looks like it would be cheaper for me to get a 3rd party app to do the mirroring, rather than paying monthly for Adobe cc.
Unless someone else knows of another solution that would work with Mavericks instead?
Thanks again!!! -
Is there a decent replacement for Mack The Ripper that works with Mavericks?
Is there a decent replacement for Mack The Ripper that works with Mavericks?
But this is not a plugin, it's basically Adobe's Photoshop lite - a standalone program.
The beauty of Intellihance was that is combined a few good native Photoshop adjustments into one menu which meant that you could perform a series of various adjustments and preview them all at once.
Don't want to leave PS to do this if I don't have to. -
Free replacement for popcorn 4 (dvd compression/burning) that works with Mavericks?
I make frequent backups of dvds that I own because my children mangle them. I was using Popcorn 4, which was just OK, but now it doesn't seem to work at all with Mavericks, and it has been replaced by Toast (on the Roxio website), which is much more expensive, and doesn't look that much better. I use Rip-it to create the Video_TS files on my hard drive, but I need something to transfer those files to a playable DVD.
I've tried Burn, Aimersoft Video Converter Ultimate, but so far, no luck.
Disclaimer: I have purchased these DVDs, and I'm just making back-up copies, not selling them on my doorstep.
I have a mid-2009 MacBook Pro running OSX Mavericks 10.9elisabethfromseattle wrote:
Tony T1: I installed it, but I am getting a message that says I cannot open it because it is from an unidentified developer. Also, it looks like they stopped updating Disco in 2011. But thank you for the suggestion.
Just right-click and then select [Open]
(you only need to do this once, then you can just click the App to open)
Developement stopped as DVD use is declining
(Apple is no longer developing iDVD).
The positive is that Disco is now free. -
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have
I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this
-
Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed
Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows. -
Has Yosemite fixed Maverick's Mail problem with Group email addresses?
Does anyone know if Yosemite has fixed the problem that Maverick's Mail program had with Contacts? Maverick's Mail program cannot show Group Address names in the email "To:" window. By default, it shows all of the email addresses in a Group rather than the Group name. The work-around requires putting Group Addresses in the "Bcc:" window. Has that problem been fixed in Yosemite?
Many thanks,
Bob WincklerHi Barney,
Just found out that Maverick's problem with Mail's Group address procedure has resulted in my email accounts being put on hold by my Internet Provider. I'm the president of a local club, and I routinely send out emails to 200+ email addresses several times a month. Since Maverick's Mail now doesn't keep Group addresses hidden when shown in the email "To:" window, we have to put those Group addresses into the "Bcc:" window. The first couple of times that I did that, the emails went through, but the third time that I tried to send out such an email, my Internet Provider shut down my email account with the statement "Your ability to send new mail has been suspended as a high volume of suspicious mail has been sent from your account recently. Please contact your IT administrator." The IT administrator required me to run a virus check and then set a new password for my account before they would reactivate it. In my discussions with several of my Internet Provideer's tech reps, it appears that the way the way that the Internet Provider has their server's security system set, a high volume of email addresses in the "Bcc:" section of emails is enough to shut down an account as suspicious. Until Apple gets this problem fixed, my only options are to switch internet providers (after finding one that will let high volumes of "Bcc:" go through) or switch to an older Mac operating system, which I've done (now using an ancient iMac 400DV running Tiger (OS 10.4.11). Given the high number of businesses, etc., likely to be using Macs, I'm really surprised that Apple has let this problem with Maverick's Mail program go uncorrected.
Best regards,
Bob W -
WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???
WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???
PLEASE HELP US AND SHOW ONE RESOLUTION.Apple wouldn't know Avid's development cycle.
And for that matter, neither would us users.
You'd have to ask Avid when they are going to fix it. -
New MBP comes with Mavericks - Upgrade vs Clean Install of Yosemite at this point?
Bought a New 13" MBP today from my local Apple Store. It came with Mavericks instead of Yosemite. I realize there is probably a lot of advantages to doing a clean install of any OS, especially when you have a lot of usage on it which creates files all over. However, I'm wondering if that advantage is minimized by doing an upgrade with a pristine OS. If very few, if any, files are left behind from Mavericks that are no longer needed does it matter?
Obviously upgrading saves me from having to go through the hassle of creating a bootable USB (wherever that thing is in one of the many junk drawers).If it were I, I would just di a clean install if you have not configured it already...it's good to have a bootable USB hanging around just in case. It's easy to make one in Terminal if you have at least an eight (8) GB available with this (I just finished one):
sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction -
hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?
So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac". I really, really miss Steve Jobs!
Maybe you are looking for
-
Order Graph Based on a different field
I'm creating a bar graph to track our design work for a specific season. I want the bar grapsh to have a sort order based on the taskID but display the Ttask Description on the chart. Here is an example of the data. RIght now the chart is based
-
How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?
-
SAP GUI slow down after installed Eastern Asian Language Package
Hello, Have any idea what happened to SAP GUI after installed Eastern Asian Language Package on Windows XP ? I am working on smartforms translations in SE63 and during entering the japanese or chinese text my working area is slowing down(problems wit
-
How control the vendor's range of use of SUS
Hi ,experts, we have one question now : we are going to use MM_SUS ,and we have two vendors A and B, wheather can we just let vendor A use the SUS?any customizing may realize our needs?
-
Asset under construction not completely credited
Hi, We are getting the message "asset under construction not completely credited" when trying to process an actual settlement for an internal order. We have checked all our settlement rules and read SAP Note 726031 but we are still getting stuck on