Replaced controller is not working for customised IC_BASE's "Root.htm" view

Hi All,
We created ZIC_BASE application and included "Root" view from standard IC_BASE .further this setup is maintained in the runtime profile for replaced controller part.
while triggering thro debugger, flow is going to IC_BASE's Root.view instead of ZIC_BASE's Root .
why customised ZIC_BASE view is not triggered even if we made set up in icweb runtime profile.
( CRM_IC view like "bupasearch" ,we are able replace and working fine but IC_BASE views are not able replace while running IC WEB profile.)
Regards,
Siva

Similar Messages

Replacement path does not work for a specific query after migration 7.0

Hello all,
We have a problem with a replacement path variable in a query.
After the migration, it seems this replacement path doesn't work. This replacement path is defined inside a structure that is used in some other queries and for the other queries is working properly.
Another think we have done is to make a copy of the query where the replacement path doesn't work and the copied query works ok.
Did anybody find this kind of problem in a migration. Any help will be appreciated.
Regards, Inma

This is just for those who might have simmilar requirement & would in case refer to this thread..
Me too faced same problem of OLE DB for OLAP cant be released. I was using replacement path query variable which was using result set from the other query.
I just had to uncheck 'Allow External Access' in release for OLE DB for OLAP in query properties. This worked from me, my query using replacement path variable is giving desired results.
Hope this might be useful for relevant users.
Regards,
Pritesh

Extended Controller is not working for SalaryCorrectPG.xml page

Dear All,
I have a problem with customisation in Oracle's seeded page in HRMS Module.
The page navigation is as follows:
Login--->Home Page---->Access Payroll Manager Responsibility------>people--->Enter & Maintain--->search for an employee------>click on Assignment button---->Click on Salary button--->Salary details page will open----->Click on correct button of the salary page.
Now I have extended the SalaryCorrectVO in the salary correct page under a custom directory (but structure is same as the seeded one)
and Created one attribute in the SalaryCorrectVO which is showing multiplied value of FTE Salary and FTEFactor in the page.
Now my concern is in the page there are three fileds(Amount Change, Change %,FTE Salary) which are editable. PPR event is fired when any value
changes in these 3 fields. Now my extended attribute (xxSalaryCorrectVO) is depending on the 3rd field's value i.e FTE Salary. So after page load when these 3 field's
value changes the FTESalary field's value is also changing but my extended attribute's value is not changing (XxfteSalary) .
So I need to update the controller of that page under where the PPR event is catched. So to update PPR event part I have extended the controller
SalaryCorrectCO class and write the follwoing code in the extended controller and put the controller in the custom directory.But whenever i put the
extended controller in the path the Salary Correct page is throwing 'null pointer exception' when the page loads itself. Please help...........
Thanks in Advance....
extended controller code:
package xxcustomname.oracle.apps.per.saladmin.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OARow;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.per.saladmin.webui.SalaryCorrectCO;
import xxexp.oracle.apps.per.saladmin.server.xxSalaryCorrectVOImpl;
import xxexp.oracle.apps.per.saladmin.server.xxSalaryCorrectVORowImpl;
public class xxSalaryCorrectCO extends SalaryCorrectCO {
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
String s2 = oapagecontext.getParameter("event");
if("changedNewSalary".equals(s2))
//Custom Code to Populate the xxfteSalary field
String rowReference =
oapagecontext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow row = (OARow)oaapplicationmodule.findRowByRef(rowReference);
if (row.getAttribute("AnnualSalary") != null)
String fteSalary = row.getAttribute("AnnualSalary").toString();
float fteSalaryFlt = Float.parseFloat(fteSalary);
//Have to get the row Impl class object to get the getter of FTE Factor to get the FTE Factor value in String
xxSalaryCorrectVOImpl vo =
(xxSalaryCorrectVOImpl)oaapplicationmodule.findViewObject("xxSalaryCorrectVO");
xxSalaryCorrectVORowImpl fteFactorEqRow =
(xxSalaryCorrectVORowImpl)vo.getCurrentRow();
String fteFactorNM = fteFactorEqRow.getFteFactor().toString();
float fteFactorflt =Float.parseFloat(fteFactorNM);
float actualSalary = (fteSalaryFlt * fteFactorflt);
oracle.jbo.domain.Number actualSalaryNMVal = null;
actualSalaryNMVal = new oracle.jbo.domain.Number(actualSalary);
row.setAttribute("XxfteSalary", actualSalaryNMVal);
//Custom Code to Populate the xxfteSalary field Ends here
} else
if("changedChangeAmount".equals(s2))
//Custom Code to Populate the xxfteSalary field*
String rowReference =
oapagecontext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow row = (OARow)oaapplicationmodule.findRowByRef(rowReference);
if (row.getAttribute("AnnualSalary") != null)
String fteSalary = row.getAttribute("AnnualSalary").toString();
System.out.println(fteSalary);
float fteSalaryFlt = Float.parseFloat(fteSalary);
//Have to get the row Impl class object to get the getter of FTE Factor to get the FTE Factor value in String
xxSalaryCorrectVOImpl vo =
(xxSalaryCorrectVOImpl)oaapplicationmodule.findViewObject("xxSalaryCorrectVO");
xxSalaryCorrectVORowImpl fteFactorEqRow =
(xxSalaryCorrectVORowImpl)vo.getCurrentRow();
String fteFactorNM = fteFactorEqRow.getFteFactor().toString();
float fteFactorflt =Float.parseFloat(fteFactorNM);
float actualSalary = (fteSalaryFlt * fteFactorflt);
oracle.jbo.domain.Number actualSalaryNMVal = null;
actualSalaryNMVal = new oracle.jbo.domain.Number(actualSalary);
row.setAttribute("XxfteSalary", actualSalaryNMVal);
//Custom Code to Populate the xxfteSalary field Ends here
} else
if("changedChgPercent".equals(s2))
//Custom Code to Populate the xxfteSalary field
String rowReference =
oapagecontext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow row = (OARow)oaapplicationmodule.findRowByRef(rowReference);
if (row.getAttribute("AnnualSalary") != null)
String fteSalary = row.getAttribute("AnnualSalary").toString();
float fteSalaryFlt = Float.parseFloat(fteSalary);
//Have to get the row Impl class object to get the getter of FTE Factor to get the FTE Factor value in String
xxSalaryCorrectVOImpl vo =
(xxSalaryCorrectVOImpl)oaapplicationmodule.findViewObject("xxSalaryCorrectVO");
xxSalaryCorrectVORowImpl fteFactorEqRow =
(xxSalaryCorrectVORowImpl)vo.getCurrentRow();
String fteFactorNM = fteFactorEqRow.getFteFactor().toString();
float fteFactorflt =Float.parseFloat(fteFactorNM);
float actualSalary = (fteSalaryFlt * fteFactorflt);
oracle.jbo.domain.Number actualSalaryNMVal = null;
actualSalaryNMVal = new oracle.jbo.domain.Number(actualSalary);
row.setAttribute("XxfteSalary", actualSalaryNMVal);
//Custom Code to Populate the xxfteSalary field Ends here
}

oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:612)
     at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(OAWebBeanTableHelper.java:2141)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequest(OAAdvancedTableHelper.java:581)
     at oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean.processRequest(OAAdvancedTableBean.java:737)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1166)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2496)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
     at OA.jspService(_OA.java:204)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
## Detail 0 ##
java.lang.NullPointerException
     at oracle.apps.per.saladmin.webui.SalaryCorrectCO.processRequest(SalaryCorrectCO.java:177)
     at xxexp.oracle.apps.per.saladmin.webui.xxSalaryCorrectCO.processRequest(xxSalaryCorrectCO.java:18)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:596)
     at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(OAWebBeanTableHelper.java:2141)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequest(OAAdvancedTableHelper.java:581)
     at oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean.processRequest(OAAdvancedTableBean.java:737)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1166)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2496)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
     at OA.jspService(_OA.java:204)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
java.lang.NullPointerException
     at oracle.apps.per.saladmin.webui.SalaryCorrectCO.processRequest(SalaryCorrectCO.java:177)
     at xxexp.oracle.apps.per.saladmin.webui.xxSalaryCorrectCO.processRequest(xxSalaryCorrectCO.java:18)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:596)
     at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(OAWebBeanTableHelper.java:2141)
     at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequest(OAAdvancedTableHelper.java:581)
     at oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean.processRequest(OAAdvancedTableBean.java:737)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1166)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:964)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:931)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:655)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2496)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
     at OA.jspService(_OA.java:204)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

Warranty and support is only valid in the country of origin. The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
Warranty is determined by device (serial number), no documentation required.
Apple does not repair devices, they replace them. For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

I got a replacment iphone 4 but it will not work for me please help??

i got a replacment iphone 4 but it will not work for me it has been charging for nearly 4 hours now but the screen still has the battery in the red and also will not connect to itunes is there something im doing wrong??

You'll have to get it serviced or replaced again, contact Apple, usually a replaced device is under warranty for 90 days as well.
Apple - Support - Service Answer Center

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2    (pkey            NUMBER,
3      lang            VARCHAR2 (2),
4      short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3    VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5    VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7    VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9    VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11    VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13    VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15    VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17    VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19    VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21    VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2    -- word list:
3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
5    -- english lexer:
6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7    -- german lexer:
8    ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9    ctx_ddl.set_attribute      ('german_lexer', 'composite',       'german');
10    ctx_ddl.set_attribute      ('german_lexer', 'alternate_spelling', 'german');
11    ctx_ddl.set_attribute      ('german_lexer', 'mixed_case',       'no');
12    ctx_ddl.set_attribute      ('german_lexer', 'base_letter',       'yes');
13    -- multi_lexer:
14    ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15    ctx_ddl.add_sub_lexer      ('global_lexer', 'default',            'english_lexer');
16    ctx_ddl.add_sub_lexer      ('global_lexer', 'german',            'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5    ('lexer            global_lexer
6       language column lang
7       wordlist       my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey           NUMBER,
   lang           VARCHAR2 (2),
   short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute     ('german_lexer', 'composite',          'german');
ctx_ddl.set_attribute     ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute     ('german_lexer', 'mixed_case',          'no');
ctx_ddl.set_attribute     ('german_lexer', 'base_letter',         'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'default',             'english_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'german',              'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer            global_lexer
    language column lang
    wordlist         my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Copa derivation rule not working for Discount GL

Hi All,
Kindly note that I have a distribution rule where company & plant combination is used where condtion is that customer group 3 should be 018 and then replace distribution channel to 03.However the rule is not working for discount GL posted in the billing document.
I tried testing it in FB50 but then it does not allows me to enter plant and because of that derivation rule fails. However in my billing doc I do see a plant against discount GL and still the rule is not getting picked.
I had raised this issue earlier but the reply where not as expected and so I have rephraised my question.
Kindly help me on this.
Regards
Pranay

Hi Pranay
I could not understand your req to a great detail, following are my observations
1. There should be derivation rule in place 1st of all to derive customer group from billing doc...
Check if Cust Group is populated in your COPA doc or not.. For this cust group should be a segment level char in KEQ3
2. Create a derivation rule using method "Derivation".
Source fields would be Cust Group, Plant and Company code ( I guess you want to change dist channel with this combination)
Target field would be VTWEG (Dist Channel)....Click on the magnifying lens beside VTWEG and choose relevant radio button "Overwrite if ......."
CLick on RULE VALUES and maintain the required Values there
This should work...
Regards
Ajay M

Oc4jadmin not working for application server control in SOA suite 10.1.3.1.

Hi,
We have installed the SOA suite, and I can login to the various components using oc4jadmin/password (bpel, esb, rules author), but for some reason that oc4jadmin password is not working for Application Server Control, which is the only piece of this I really need to log in to.
Any thoughts on what is going wrong?
Cheers,
Pat Rock

Maybe you change this password internally for another application (such BPEL, WSM,etc) and didn't make change for your main OC4J container.
You can try to change this password by...
1. Open the file [OASHome]\j2ee\home\config\system-jazn-data.xml
2. Find the section that looks like this
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]{903}F+iG1A46edXG9RdfY0pD2O4Ge/qyEjsg[credentials]
[user]
3. Replace the value separated by the "Credentials" starting and ending tags with your new desired password, prefixed with an exclamation point
Example:
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]!newpassword[credentials]
[user]
4. Save the file and restart OAS
This should not affect other applications.
Greetings.

PS4 controller mic not working

Hi
I've had my PS4 since day 1 release and same controller until just few days ago when i noticed rubber was coming off bad from the thumbsticks and the audio jack the sound wasn't working as normal, it was coming out the headset very low and at like a different pitch or tinny/distorted (if that makes sense) and people could no longer hear me and they said there was an echo or something. So I bought a new controller (black) and I can hear sound (gameplay and people talking in game chat and party chat) but it doesn't pick up my voice no one can hear me, went back to the shop and had the remote replaced and the same thing with the new replacement (black), funny thing is though, my sisters remote from her white PS4 works with my console and the headset mic works perfectly, sound comes in and it recognises my voice and people can hear me, I can press L2 on the main and use my voice to start the game or whatever. I tried deleting and repairing the controllers, i tried pressing the reset button on the back of controllers, checked that its pushed in all the way, half way, tried turning it, nothing worked.I contacted sony support and they can't help me cos its third party devices being used with the controller.
What i usually used was beats solo 2 headset or iphone earphones.
Am I getting faulty controllers?
BEFORE saying my mic is the problem, why is my headset working on my sisters white controller but not working on the 2 new black controllers? Thanks.

I think we need to start a list of complete let down threads. I thought this was some type of support group.

Replaced controller is not working for customised IC_BASE's "Root.htm" view

Similar Messages

Maybe you are looking for