Replaced Display and see dots.

I took my White MacBook to the genius bar because the batter wouldn't charge. I have the one year limited warranty and it's about to expire (unsure if I should buy the warranty bc it's too expensive for me), and While I was there I brought up another issue besides the battery, The Screen.
I had internal scratches on the screen. At first the technician told me It has to be replaced through shipping it off for a week. But then later on, He said that they can change the display for me at the store without shipping it off.
I have my macbook, the internal scratches are gone, but now when I look at my computer in an angle, I see a lot of little small dots. It looks like my screen is wet or STICKY.
It never displayed like this because sometimes I use my mac while I'm standing up and I wouldn't see that, now when I use it standing up and it on the desk, I see those dots.
I asked the technician about the problem and he got MAD!!! He said that that's how it is, that all parts in macs are different. That we can change the screen 100 times and it will still look like that.
In general the screen looks good when it's in front of me, but in any angle I see the small white dots, it looks like my screen is wet or gooey or something.
My display was replaced. Do you think that the display they put is for the new macbook? or what? I think that it might be, unsure though.
WHAT I HAD MOSTLY IN CONCERN WAS THAT MAYBE THEY DID A CHEESY JOB BECAUSE OF THE FACT THAT THEY DIDN'T SHIP IT TO REPLACE THE SCREEN.
Opinions Please..

I have tried that moment I saw it.
The problem is internally. I have to be directly in front of the screen in order to see a clear image.
If I see it in a slight angle to the right or left I see fuzz. Somewhat the same as the type of static you would see with an antenna tv without the new digital tv transceivers. Similar, but white. The static isn't as bad at the tv though.. It looks like the screen is dirty or staticy or goowy Tech said it's normal but it's not

Similar Messages

HP dm3-1030us Replacement Display

I've got a quick question...
The screen on my dm3-1030us has been badly damaged due to a recent fall it suffered. The computer, itself, is fine (I have it hooked up via HDMI to a TV as I'm typing this...) however the display is pretty messed up. I've been trying to research a replacement display and I've found this...
http://i617.photobucket.com/albums/tt255/Lambo77355/Capture.jpg
It gives me these three choices, however there are only two different product numbers...but there are three different prices. So, basically, my question is which one is the right one, and why are the prices different?
Edit: I tried to embed the image, but this forum doesn't seem to support images...

There are two screens there. One is an LED and one is a regular TFT panel. They do not interchange. There are two prices for each type; one with exchange of the old broken unit and one without. I suggest removing your panel and checking the back of it for the part number or if you have your original box it should say in the specs which type of panel you have. Those prices are a bit high and you can do better in the replacement market online or on eBay.

By asking for the function seek and replace [apple F] i get no display - so see nothing except the upper stroke. what is going on? and what can i do about it?

by asking for the function seek and replace [apple F] i get no display - so see nothing except the upper grey line. what is going on? and what can i do about it?
restarting doesn't work

Does trashing the preferences help? See Replace Your Preferences

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

discoveriweb wrote:
This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
Which means that you are only considering half of the problem, but that's your choice.
I'm out.

I can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

i can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

I don't play any Facbook games, but I'm assuming that they are played using your browser (Safari, Firefox, etc.).
Clinton

I've just send to repair my retina display and I'm no very sure that they replace it for a LED one . How I could know which kind of display I got now??

I've just send to repair my retina display and I'm no very sure that they replace it for a LED one . How I could know which kind of display I got now??

If you head over to ifixit.com, you can check out their replacement guides for each of the items you feel needs replacing. The cost for the parts is listed there. It would be that cost + labor at an Apple store. I'm not sure if they would replace things that are cracked as that is cosmetic damage and doesn't affect how well (or poorly) the computer works. You would have to bring it to a store and ask.
~Lyssa

My iphone 4 recently shattered and i was wondering are those screen replacements retina displays and the same quality as the apple screens ?

Are these cheaper alternative screen replacements retina display and the same quality as the apple screen

I am assuming you are having Apple do this. They will just replace the whole phone with a refurbished one.
If you're having it done at a third party place then you'll have to ask them all the questions.

HT201250 I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please hel

I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please help

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC
See the Second Chance to Use Setup Assistant here...
http://Pondini.org/OSX/SetupLion.html

In send mail body of text all commas r displayed as Dots and all dots as co

Hi Experts,
I am sending sales order details in mail but when it reaches the users outlook mail box all
commas are displayed as dots and all dots are displayed as commas.
Work flow body
Sales Order No : &BUS2032.SALESDOCUMENT&
Customer No : &BUS2032.ORDERINGPARTY.CUSTOMERNO&
Sales Organization : &BUS2032.DISTRIBUTIONCHAIN.SALESORGANIZATION&
Sales Division : &BUS2032.SALESANDDISTRIBAREA.DIVISION&
Total Credit Limit : &CREDITLIMIT&
Available Credit Limit : &AVL_CREDITLIMIT&
Present Order Value : &BUS2032.NETVALUE&
Mail body Display
Credit Limit exceeded By 22.221.456.873,75-
Sales Order No : 262
Customer No : 300000
Sales Organization : 1000
Sales Division : 10
Total Credit Limit : 12.000.000,00
Available Credit Limit : 765.286,25
Present Order Value : 22.222.222.160,00
Please tell me how to resolve this issue.
Regards,
Hari

Hi,
this is the "Defaults" settings of the user.
Go to SU3 and in the "Defaults" tab, choose your choice.
Hope this solves your issue
venu

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

Try resetting the PRAM and SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

I have the iPad with retina display and the screen is cracked, however it is not yet a year old, how much does it cost to replace it

I have the iPad with retina display and the screen is cracked, however it is not yet a year old, how much does it cost to replace it?

I don't know what country that you are in, but in the US the price for repair (i.e. replacement) is (from here) $299 for the iPad 3, and here in the UK (from here) £256.44

How do i restore default text/font settings for fire fox?Text is not displaying correctly some letters not dark and see odd characters inplace of letters in words

How do i restore my text so that all words are uniform in darkness?Now some letters are fragmented or missing a part of it and see odd characters instead of letters in some sentences.Ive tried different fonts in the Options still the same.Would like to
be able to restore my default settings for text/fonts.Would that eliminate this problem?

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Folder action to find and replace text and change line feeds

I want to use a folder action to find and replace text and change Mac carriage returns to DOS line feeds inside text files.
The text to be replaced is: "/Users/wim/Music/iTunes/iTunes Music/Music" (without the quotes)
This text has to be removed (i.e. replaced by an empty string)
The text occurs many times within each file.
The files are playlists exported from iTunes in the M3U format (which are text files). They contain Mac carriage returns. These need to be changed to DOS line feeds.
I have found the following two perl commands to achieve this:
To find and replace text: perl -pi -w -e 's/THIS/THAT/g;' *.txt
To change carriage returns to line feeds: perl -i -pe 's/\015/\015\012/g' mac-file
I know that it's possible to make a folder action with Automator that executes a shell script.
What I want to do is drop the exported playlists in M3U format in a folder so that the folder action will remove the right text and change the carriage returns.
My questions are:
Is it possible to make a folder action that executes command line commands instead of shell scripts?
What is the correct syntax for the two commands when used in a folder action shell script? Especially, how do I escape the slashes (/) in the string to be removed?
Thanks for your help

Ok, I've include an applescript to run a shell command. The applesript command quoted form makes a string that will end up as a single string on the bash command line. Depending on what you want to do, you may need multiple string on the bash command lines. I've included some information on folder actions.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set desktopPath to (path to desktop) as string
    log "desktopPath = " & desktopPath
    set unixDesktopPath to POSIX path of desktopPath
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
How to set up a folder action.
1) right click on folder. click on Enable folder actions
2) Place script in
/Library/Scripts/Folder Actions Scripts
3) right click on folder. click on attach folder action
pick your script.
Create a new folder on the desktop & try.
You can put multiple folder actions on a folder. There are other ways of doing this.
Here is my test script:
on adding folder items to this_folder after receiving dropped_items
    repeat with dropped_item_ref in dropped_items
       display dialog "dropped files is " & dropped_item_ref & " on folder " & this_folder
    end repeat
end adding folder items to
How to make the text into an AppleScript program.
Start the AppleScript Editor
/Applications/AppleScript/Script Editor.app
In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
Copy the script text to the Applescript editor.
Note: The ¬ is typed as option+return. ption+return is the Applescript line continuation characters.
You may need to retype these characters.
Save the text to a file as an script and do not check any of the boxes below.

Replaced Display and see dots.

Similar Messages

Maybe you are looking for