Replaced hard drive and getting error

start up failed hard disk smart 0301
and quick scan 0303
i have everything backed up on my external.... this is the 2nd time i replaced the hdd... the 1st time it was under warenty
i have a hp pavillion dv5 -1251nr
i also have the op cd.... it was running vista.... help because i made the mistake of getting a sony netbook and its done for... my only chance to have a working pc is this hp.... and i am going insane without one

Contact the vendor of the new hard drive and request an RMA. Sometimes hard disks are received and the fail right out of the box. The manufacturers and vendors are aware of that. That is always a great reason to keep a receipt.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?

Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?

Hi there,
I was able to format the Toshiba hard drive on my old Mac and copy the Adobe Suite onto it. I followed instructions to format the hard drive to the Retina Mac through Disk Utility, but I still can see the external drive on the new Mac.
Any suggestions…?
Susan Babin

My old hard drive crashed. How do you reload CS2 on new hard drive and get it activated?

My old hard drive crashed. How do you reload CS2 on new hard drive and get it activated?

You'll need to get onto Support and explain, and if you have not made a habbit of asking, they'll reset your activations limit back to zero. Or if you have only ever installed it once, you'll still have an activation to use.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

G5 Tower, replaced hard drive and now can not get it to work- HELP

My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

Did you reset your PRAM?
command-option- p-r
Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
If it works be sure to check your date and time settings (the system will tell you)
You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
Hopefully that will take care of the problem.

How do i upgrade my hard drive and get it to boot in Mountain Lion?

I have a Late 2009 Macbook 6,1 and want to install a new, larger capacity hard drive. Currently I am running Mountain Lion and don't have any install disks, so the question is, what is the process to change out the drive and get the Mac to boot after the new drive is installed. Since it is a new drive it won't have a recovery partition or any operating system files. My plan is to migrate my data using my Time Machine backup, but I worry that when I try to boot after the new drive is installed, all I will be greeted with will be a flashing question mark. I'm really having a hard time finding a step-by-step set of instructions for someone attempting what I'm trying to do. I do have an external enclosure I could put the new drive into before I put it into the Mac. Would I try using something like Migration Assistant to transfer all of the files to the new drive and then just swap out drives afterward? Would the OS migrate as well, or would I still not have a bootable drive? Or is there some kind of minimal boot disk I could burn onto a CD or flash drive and then once the machine boots go with a restore from Time Machine Backup? I'm open to any ideas anyone may have on the least painful way to go about this process. Maybe use some (hopefully free) software of some sort to clone the current drive onto the new drive while it's still in the external enclosure? Any help or ideas would be greatly appreciated!

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Macbook Pro replacement hard drive and re-installation of OS X

My son's Macbook Pro (mid 2009) started crashing on boot up and gave a input output error. I have replaced the original 250gb hard drive with a 750gb drive and also upgraded the ram from 2 to 8. Finally I have also replaced the battery. I am using Leopard installation dvd to re-install the software but can only progress as far as the screen 'Install Mac OS X' but there is no disc offered to install it on. By using Disk Utility the only disc shown is the dvd. Pressing the 'New Image' tab I entered 'Save As' 750gb WD HD and 'custom size' as 750 gb. Utility Disk informs me that the disc is only .75mb? Any suggestions to solving my problem and completing the installation program?

Niel, I've checked the connection to the hard drive and all is good but as a check I have disconnected and re-connection the cable to the hard drive and the board. I have also 'listened' to the hard drive and it appears to be spinning. Unfortunately, the Snow Leopard installation disc gets no further with its installation. Are Macbook Pro's of this age prone to cable breaks, or am I using the wrong disc for a full OS X installation, if Snow Leopard is an just as update? Is there anyway to add the drive using Disk Utility and if so how do I do it?

Replaced hard drive and iTunes does not recognize my laptop

My 2011 MacBook Pro froze up and when I rebooted the folder error came up. Replaced hard drive with a SSD drive and my new OS has a new name. When I logged into ITunes I had to delete an account due to my limit being reached. My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00. The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music. Am I missing a step or can I rename my Mac so it will match my old ID? If I rename it can I download my old info off of ITunes?? Thanks

I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online). What account was this and what limit??
Old Mac ID? Your AppleID is what you use to log into the store. It does not change with computers. You always use the same one, perhaps updating the email address from time to time.
By the cloud do you mean iTunes Match?
Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now). That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too. You may have to authorize the computer again. I don't know which part of the computer is used for authentication and if that got lost with the old drive.

How to replace hard drive and transfer everything over?

I've looked everywhere but am unable to find a definitive guide on how to do this.
Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Replacing Hard Driver and RAM

Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
See this knowledge base article for your migration question.
http://support.apple.com/kb/HT1177
Hope this helps
Message was edited by: leroydouglas

Music on hard drive, replaced hard drive and now library won't match up

I put all my cd's on a hard drive (9000 or so songs) and had a hard drive failure, so I moved all the songs to a new hard drive and now I can't use the Itunes library to connect with that hard drive, except one song at at a time.
Is there any way to get these two to communicate?
David

Is the rest of your music located in a different folder? You'd need to know where those files are in order to add them to iTunes. If you're not sure of their location, try a Spotlight search. Are you not able to locate the files to add them to iTunes, or are you selecting them but they are not appearing in the iTunes library?
I have all the actual music files located on a external hard drive, but the itunes file name(s) are located on the computer. The problem started when I got a new computer and switched all the stuff over, and then got a new hard drive because the old one was making noises. I copied one hard drive directly over to the other and now am trying to connect the two so they talk together.
The fix you sent me semed to work great until I noticed that I did not have any music after the letter "a" (namely 1/36 of the music). I ried it again with another copy I had and lost that too. Now, I am working with the copy I had on the other computer, which doesn't have all the data, but does have most of it, and I can survive adding the other stuff later somehow by re-copying the music and getting the data over again, but I do want to somehow get the other 35 letters worth, if possible.
David Molony

Just Replaced Hard Drive and Time Capsule Suddenly Almost Full

I just replaced my 200GB hard drive (with approx. 165GB used) with a 500GB hard drive. My Time Capsule now shows about 330GB in storage...about my original 165GB x 2. So, I'm thinking that I now have my 165GB from my old hard drive in storage, and the 165GB from my new hard drive.
My question is...how do I correct this?

Was this an internal drive that was replaced? If so, my guess would be that the Time Capsule sees this as a new computer and will backup the contents of the entire drive.
Open your Hard Drive and look for the SHARED heading on the left. Click the Time Capsule icon and a Time Capsule folder will appear in the window on the right. Double click this folder.
You should now see a xxxxx.sparesbundle file for each computer that has been backing up. The sparsebundle file contains the name of your Mac and MAC address. If you see the same listing twice, you will know that the TC has made a new complete backup of your computer.
I haven't experienced your situation first hand, so I'm not clear on whether you will be able to access the "old" backups from your "new" computer. That might be the subject of a new post if that is the case.

Moving library to external hard drive and get the error "Copying files failed. The disk could not be read from or written to"

Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3

OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks.

Replaced Hard drive and logic board on ipod 5.5g...still get sad ipod HELP!

I've tried searching around the forums to see if anyone has had this similar problem AFTER replacing the hard drive in their ipods. Of course there are tons of people with similar issues, and the responses are always "replace the hard drive", so I'm going to see if there are any other possible issues out there that I could look into. So here's my situation specifically.
I have an ipod video 80 gig, and it seemed as if the hard drive pooped the bed on day 366 (only a slight exaggeration) after purchase, putting me right outside of my warranty. The apple store wouldn't do anything without charging me the cost of a new ipod to repair it. So, it had been sitting in my desk drawer for almost a year when I finally got around to replacing, and upgrading, the hard drive. I found a 120 gig drive on ebay, which after an email confirming my model, the seller said should work as a replacement. After installing the hard drive, I got the same exact problem that I had before. It would say to "wait. low battery", then the apple logo would show up with no back light, and then it would go right to the sad ipod face. I left it charging for a couple of hours, and it would just keep cycling through those three screens, until dying eventually after unplugging it. If I hook it up to my computer, nothing happens besides the ipod trying to charge. When I try to force it into disk mode, it seems like the ipod will reset to the apple logo screen, but it goes right back to doing the same little dance. I tried opening it and checking the cables a couple of times, and the last time, I broke the little cable clamp that holds the lcd ribbon. So...I ended up buying a replacement logic board. I installed that, hoping the logic board may have been the problem all along, and as soon as I plugged it in...same old crap. Now, in a last ditch effort, I've ordered a new hdd ribbon to see if that remedies the problem.
I realize that I should have perhaps waited a week until it comes, to see if that fixes it. But to be honest, I can't see anything wrong with the hard drive cable that I have right now, so I remain doubtful that it's going to fix anything. What I'm wondering, is if anyone has any idea if there is something that I may have overlooked, or if I might be barking up the wrong tree? Is it possible that the hard drive that I ordered was broken when I installed it? The seller (who seems to be a reputable seller on ebay, with lots of positive feedback) said that they test all of there hard drives before selling/shipping, and that there is no way that they shipped me a broken one. They also seemed convinced that the hard drive would work with my model. Is there anything other than the hard drive, or logic board that could cause this type of problem? Is the hard drive ribbon the only other possibility? Is there something software wise that I can do?
Please. Any feedback or help would be greatly appreciated. I've spent more on this thing than I could have paid for a used, but working one, and I'm about to lose it.
Thanks!

UPDATE:
Ive installed the new hdd ribbon. It seems to have gotten me a little closer to solving my problem. I am now able to get into disk mode, and if I reset it, I can get to a screen telling me to connect my ipod to itunes and restore it. However, after the restore process, it says it's resetting the ipod, and then it goes right back to telling me that it needs to be restored. I've been trying to search all the forums on the "restore loop". It seems like a lot of people have had luck changing the drive letter. My problem is, that I can't get into the disk management window. When I try to click on it, I get the "program is not responding" and the window freezes until I close it. Again, I'm using windows Vista 64.
Any help would be GREATLY appreciated. I'll just try to keep trying, and keep looking around in the mean time.

Our computer crashed, we replaced hard drive, and now we can't get Photoshop to open.

One of our computers crashed and we had to replace the hard drive. Now we can't get Photoshop to open. Since the computer didn't give us any warning we didn't get to deactivate Photoshop before the crash. I've been on the Adobe site for over an hour getting run around in circles without getting even close to finding a solution. Apparently, there are no living humans at Adobe and their customer care department consists of this "community" and a lot of redundant web pages. Decent customer service would be a nice touch for such a big company.

So sorry for your troubles. This is a user-to-user forum & we're all just product users like you. Unfortunately, we can't help you with deactivation/activation issues since we don't work for Adobe.
In the US, Customer support phone number: 1 (800) 833-6687
On-line chat is usually the best way to reach customer care. But their hours vary by region.
Contact Customer Care
Good luck!
Nancy O.

Replaced hard drive and getting error

Similar Messages

Maybe you are looking for