Replaced hard drive and iTunes does not recognize my laptop

My 2011 MacBook Pro froze up and when I rebooted the folder error came up.  Replaced hard drive with a SSD drive and my new OS has a new name.  When I logged into ITunes I had to delete an account due to my limit being reached.  My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00.  The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music.  Am I missing a step or can I rename my Mac so it will match my old ID?  If I rename it can I download my old info off of ITunes?? Thanks

I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online).  What account was this and what limit??
Old Mac ID?  Your AppleID is what you use to log into the store. It does not change with computers.  You always use the same one, perhaps updating the email address from time to time.
By the cloud do you mean iTunes Match?
Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now).  That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too.   You may have to authorize the computer again.  I don't know which part of the computer is used for authentication and if that got lost with the old drive.

Similar Messages

  • Ipod was corrupted i restored it now windows and itunes does not recognize

    one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • Windows and iTunes does not recognize

    yada, yada...
    I tried the Rs, but my new computer and iTunes does not recognize my shuffle. Can someone give me basic steps to correct this? Shuffle was previously 'synched' with another iTunes library and I don't want to erase my currently uploaded music. Help please!

    I don't know if this is the same problem, but I cannot get my I-pod Nano to sync or have I-tunes recognize it. It is a connector problem, and this is my second Nano to do it within nine months. Apple wants $32 to send it in to be repaired once again. I am irritated beyond belief. I took my Nano in to an IMAC store and they confirmed that it was a connector problem. They could not send it off nor repair or replace it though. So I've had two Nano's since Christmas have this problem.
    I would suggest that you try another device (shuffle) on your computer to ensure that it's not your computer (our other I-pods worked on the computer) and/or take it in to an IMAC store where they will see if it connects to one of their computers.
    Right now I think Apple products are basically crap...

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

    Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

    - See if placing the iPod in Recovery mode will allow a restore.
    - If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
    - Then time for an appointment at the Genius Bar of an Apples store.

  • My iphone is stuck in emergency call mode and itunes does not recognize my phone

    my iphone is stuck in emergency call mode and itunes does not recognize my phone

    NVM... broke down and called Apple Care.  Pressed on/off button and held it for a few minutes before pressing home button.  In recovery mode, but at least it is doing something now!

  • After downloading iOS 6 ipod is flashing apple and itunes does not recognize

    I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it.  help?? it is only 8 mos old

    - See if placing the iPod in Recovery mode will allow a restore.
    - If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
    - Then time for an appointment at the Genius Bar of an Apples store.

  • I dropped my iphone, it cracked (it alredy had some cracks in it) and the screen is black but sometimes has a background light.. When i plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not recognize it. What can I do?

    I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal).  icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
    Thanks

    Sounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.

  • My iphone 4s is stuck on recovery mode and itunes does not recognize it at all.

    Hi. Last night I left it updating 5.1.1 from 5.1 when I was going to bed. And at night I heard usb noise and woke up. iTunes had an error, I did not remember what is written there because I was sleepy. I think it was like 1612 error but I'm not sure.  There were an itunes logo and an usb wire on the phones screen. And I cant get rid of it. iTunes does not recognize the phone in "DFU mode" too. I need the phone today and I dont know what to do. Please help me. Sorry if my english is bad.
    itunes: last version
    os: windows 7 64 bit

    http://greggjturner.com/download.html
    This program got me out from the loop. I dont know sharing it here is legal or not. But it is the solution for this problem. However I'm still wondering why I faced a problem like that. Is an update is that hard?

  • Brand new Ipod touch bought yesterday - Screen is frozen with an itunes emblem and cable. Unable to refresh or restore ipod. Computer and itunes does not recognize ipod.

    This is first Ipod for me  - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?

    Before you can use the iPod you have to activate it by connecting it to a computer with iTunes.  Try the following to get your computer to see the iPod so you can activate the iPod.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • 5g wont boot past logo and itunes does not recognize

    i have tried all the holding down of the buttons that are out there with no results.  Windows and itunes will not recognize and touch will not go into connect to itunes screen.

    Try the remaining actions of:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I keep getting the same message ...trying to put my credit info and iTunes does not recognize my info

    I have an iPad, trying to put my credit info in.....it says iTunes does not recognize my info.

    Accepted form of payment
    http://support.apple.com/kb/HT5552

  • G5 Tower, replaced hard drive and now can not get it to work- HELP

    My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
    The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
    I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

    Did you reset your PRAM?
    command-option- p-r
    Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
    If it works be sure to check your date and time settings (the system will tell you)
    You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
    Hopefully that will take care of the problem.

  • My ipod 3rd generation nano will not power up and itunes does not recognize it, what can I do?

    My 3rd generation will not power up. I've tried to reset it by holding the menu and select buttons at the same time but nothing happens. My itunes will not recognize it either when i connect it to the usb port. Does anyone have any suggestions? Thanks.

    See:
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • PI 7.0 Cluster Installation guidelines

    Hello and Merry Christmas, is there any step by step guide for installing PI 7.0 in MScluster? is the first time that i have to perform Abap&Java cluster installation. Thank you, Dimitrios

  • VoiP on Nokia E51 - Help Needed Urgently !!!

    I am located in Copenhagen Denmark and I use a wireless network to connect to the internet. My Nokia E51 is also able to detect the same network when I scan for WLAN. However when I try to use it to make a net call it says ''NO WLAN COVERAGE FOUND''.

  • Budget consumption value

    from mbew table i want budget consumption value which field i have to consider urgent reagrards anil

  • Pricing gap issue

    Hi Experts,    As we are in to implementation of a project, the thing is i just want to have few gaps which were a solved earlier in pricing so that i can have some idea about it . I would be greatful if u could send me some gaps  in pricing which we

  • Date/Time Question - Milliseconds

    How can I get the number of milliseconds after the 1970... from a date? Is there such a method in the API? I looked at the DateFormat and NumberFormat classes but I didn't find it... Is there a way a to do this? I want to be able to give a date and g