Replaced Hard Drive and Trying to Bring in Purchased Items from iPod

The MacGenius I talked to yesterday said that I could do this, and made it sound like it would be automatic, but I have found (with the replacement of my hard drive) that sometimes these guys forget to mention a step.
Right now, when I sync my iPod, I get a message that my purchased items are not "authorized" to play on this computer.

*If this computer is authorized through the same account, then theoretically I should be able to play any of the purchased songs on my iPod as well, right?*
Correct, if the songs on the iPod were from the same iTunes Store account as the one the computer is authorised for they should play on both devices. Try deauthorising your Mac and authorise it over again, this can sometimes clear a "not authorised" problem. Make sure for instance that the Mac has only been authorised once, see this article: One computer using multiple iTunes Music Store authorizations.
If you continue to have problems you can email Customer Services from this page and they might be able to help: iTunes Music Store - Authorization FAQ

Similar Messages

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat.

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external hard drive and still be able to access them from Aperture and or iPhoto?

I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external hard drive and still be able to access them from Aperture and or iPhoto. How is the best way of doing this?

Here is how to do it with iPhoto:
http://support.apple.com/kb/PH2506
As for Aperture, you'll need to do a search on the support website yourself because the result is a download so I couldn't post a link - the instructions are in the user manual. I believe the settings are within Aperture's Preferences.

Just bought a new IPad mini and trying to transfer game center files from Ipod. How do I do this?

Just bought a new IPad mini and trying to transfer game center files from Ipod. How do I do this without losing level progress?

Restore from your backup of your iPod on your computer.

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

This Apple Tech Note explains the process:
http://support.apple.com/kb/ht1848
It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac. I got the picture files, but could not get the book I had worked on. How do I find my book?

I made a 'Blurb' book using Lightroom on a computer that was not mine. I backed up the book on an external hard drive and then tried to import the book into my imac. I wasn't able to retrieve my book. The photos I used for the book project are there, but the 45 page book I made is not there.
What do I need to do?

You would need to go to the computer containing the book.
Select the saved book in the Collection panel.
Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
File>Export as Catalog and store on media you can use to transfer
Bring this catalog onto your computer
File>Import from another catalog and bring the transitory catalog into your master catalog.
It should bring the images, your collections (including your book) and other settings into your own catalog.

How to replace hard drive and transfer everything over?

I've looked everywhere but am unable to find a definitive guide on how to do this.
Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Replacing Hard Driver and RAM

Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
See this knowledge base article for your migration question.
http://support.apple.com/kb/HT1177
Hope this helps
Message was edited by: leroydouglas

G5 Tower, replaced hard drive and now can not get it to work- HELP

My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

Did you reset your PRAM?
command-option- p-r
Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
If it works be sure to check your date and time settings (the system will tell you)
You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
Hopefully that will take care of the problem.

Music on hard drive, replaced hard drive and now library won't match up

I put all my cd's on a hard drive (9000 or so songs) and had a hard drive failure, so I moved all the songs to a new hard drive and now I can't use the Itunes library to connect with that hard drive, except one song at at a time.
Is there any way to get these two to communicate?
David

Is the rest of your music located in a different folder? You'd need to know where those files are in order to add them to iTunes. If you're not sure of their location, try a Spotlight search. Are you not able to locate the files to add them to iTunes, or are you selecting them but they are not appearing in the iTunes library?
I have all the actual music files located on a external hard drive, but the itunes file name(s) are located on the computer. The problem started when I got a new computer and switched all the stuff over, and then got a new hard drive because the old one was making noises. I copied one hard drive directly over to the other and now am trying to connect the two so they talk together.
The fix you sent me semed to work great until I noticed that I did not have any music after the letter "a" (namely 1/36 of the music). I ried it again with another copy I had and lost that too. Now, I am working with the copy I had on the other computer, which doesn't have all the data, but does have most of it, and I can survive adding the other stuff later somehow by re-copying the music and getting the data over again, but I do want to somehow get the other 35 letters worth, if possible.
David Molony

Replaced Hard Drive and Trying to Bring in Purchased Items from iPod

Similar Messages

Maybe you are looking for