Replaced Hard Drive in MacBook Pro - now TC wants to back up whole drive
I replaced the 120 Gig hard drive in my MacBook Pro with a 320 Gig drive and cloned the old drive back to the new one. Time Machine now wants to treat this as a different drive from the one I have backed up on my Time Capsule. How do I convince TM to backup the new drive incrementally to the old image on the TC rather than creating a whole new back up?
The cloning software you used probably does not copy the journaling entries. Since TM relies on the event-driven journaling entries, it has no choice but to start a new full backup all over again.
Similar Messages
-
Hard drive crashed on macbook pro. now i want to recover all my photos on my iPhone (iPhone photos, favorites, stream, etc..) w/ out loosing. do i simply sync my iPhone? paranoid i will wipe iPhone photos when synching to new hard drive image and new iTunes image.
In addition, i lost all of my music when hard drive crashed (time machine backup was corrupted also), is there anyway to recover iTunes music. Music was a combination of purchased, CD's burned, diverse music library, etc.....
thank you,
JContact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing! -
Replaced logic board on MacBook Pro; now I must reauthorize!
I've just synched my iPhone with my MacBook Pro which came back today after having its logic board replaced under the nVidia issue recall program. But I am not that comfortable with the idea that I've now used up 2 of my 5 computers for apps/songs etc.
What can I do? I imagine that I need to inform Apple to de-authorize my previous logic board. But how?If you weren't able to de-authorize your MBP before sending it in for the logic board to be replaced, I don't believe you can reset or de authorize all currently authorized computers until you reach or authorize 5 computers. You can then do a complete reset or de-authorize all authorized computers followed by re-authorizing the computer you are currently using.
-
Just added an external drive to my MacBook Pro now I want to place all my photos there.
How do I get LR 5 to recognize where they are?
Move the photos using your operating system, then in Lightroom follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
-
Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.
Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X. -
MacBook Pro does not boot past apple screen after replacing hard drive
After replacing hard drive on MacBook Pro 13 inch early 2011 model, the screen only boots to the apple logo. Do I need to re-install the OS?
The problem is that the OS is not in any where else of the MacBook Pro than in the HD / SSD. If you replace the Hard Drive, then you will need to Re-install OSX into that hard drive, it's pretty easy.
1) Power up your Macbook Pro, as fast as you can press and hold the Option key (ALT). You'll see that it opens the bootable-devices you have, you'll see a Recovery partition, click it.
(If the Hard Drive contains data do the following)
2) In the menu select Disk Utility.
3) In Disk Utility go ahead and select the Hard Drive that is inside the MBP.
4) Erase the content.
(If the Hard Drive contains no data continue with the following jumping the last 3 steps).
5) Select Re-install OSX.
6) Select the Hard Drive in which you want to install it.
Follow the steps of everything else (it should take approximately 1 hour to do the whole thing).
Hope this helps!
Later. -
How to replace hard drive in macbook pro?
How to replace hard drive in macbook pro?
Hi S,
If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions. -
I replaced hard drive in macbook pro and when turning on i get a blinking question mark
just replaced hard drive on my '09 macbook pro and rebooted to get the blinking question mark. what do i do? not sure i have the installation disk. i had this happen once on an older macbook and was able to figure it out but i can't remember what i did.
Schedule an appointment with a Genius the SSD is gone.
-
i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.
yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.
-
i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???
Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.) -
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599 -
I went to Mac Store and had replaced hard drive because I encountered 4HDD ERROR(hard drive failure). I had backed up my old hard drive by TIME MACHINE regularly. Now how can I restore everything I had?
Thanks for your response.
I had tried COMMAND+ALT+R which led me to directly to INTERNET RECOVERY via wifi. After 1 hour or so it dropped me at the same point.
I've tried MIGRANT ASSISTANCE as well, it kept on LOOKING FOR OTHER COMPUTERS even though I clicked on TIME MACHINE BACK UP USING EXTERNAL HARD DRIVE
so what to do now?
P.S. Guys at MacStore were so careless to even listen to me when I asked them about retrieving back up :(
Please help -
i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated
Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen. -
I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD
To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao. -
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
Maybe you are looking for
-
How to hide fields in Table maintenace screen
I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.
-
Why won't my computer recognize my ipod when I try to restore it?
I've had a problem with my ipod saying "do not disconnect". I've gone through every step to no avail. When I tried to restore the ipod and launch the updater, it's telling me it "can't mount ipod". My usb port is fine and the computer recognizes the
-
Hi all, I have 3 questions 1) What happens if a customer master is created using T-code VD01 and not XD01. 2) Is there any impact this will have. 3) Is it always compulsary to create customer master with XD01. Thanks Vikrant
-
Sloooooooooow Start Up Times.....any ideas?
I used to boot in 13 seconds, then online in 23 or so. Now it takes about 27 seconds to see the main screen, and about another minute (almost) before I can get online. I also looked in activity monitor, the only thing non intel is the Microsoft offic
-
RedHat PAK and license for UCS C220M3
Dear Support Commmunity, I just got this new Cisco UCS C220-M3S where I should install a Cisco MATE and it requieres Redhat Enterprise Server 6.5. I also got the Cisco PAK for RedHat. I registered in the RedHat customer Portal, but I have not option